Agricultural Landscapes

Covering one third of Earth's land surface, forests are vital to global biodiversity, climate regulation, and human well-being. In Europe, forests and woodlands reach approximately 40% of land area, and the forestry sector is central to achieving the EU's climate neutrality and biodiversity goals; these emphasize sustainable forest management, increased use of long-lived wood products, and resilient forest ecosystems. To meet these goals and properly address their inherent challenges, current practices require further innovation. This chapter introduces DigiForest, a novel, large-scale precision forestry approach leveraging digital technologies and autonomous robotics. DigiForest is structured around four main components: (1) autonomous, heterogeneous mobile robots (aerial, legged, and marsupial) for tree-level data collection; (2) automated extraction of tree traits to build forest inventories; (3) a Decision Support System (DSS) for forecasting forest growth and supporting decision-making; and (4) low-impact selective logging using purpose-built autonomous harvesters. These technologies have been extensively validated in real-world conditions in several locations, including forests in Finland, the UK, and Switzerland.

Conventional field operations spend most of their energy moving the tractor body, not the implement. Yet feasibility studies for novel agricultural vehicles rarely tie mechanics, energy harvest, draft, field geometry, economics, life-cycle CO2, and uncertainty quantification together on a single reproducible code path. This paper builds such a framework and applies it to CableTract, a two-module cable-driven field robot. A stationary Main Unit (winch + motor + battery + harvester module) (MU) and a lighter Anchor module (held by helical screw piles) tension a cable across a strip while a lightweight implement carriage rolls along it. The heavy bodies stay on the headland; only the carriage enters the field. The carriage runs a 10-implement library co-designed for the cable architecture. This co-design is the paper's central analytical lever. The framework is prototype-free. It chains a catenary cable model, a drivetrain efficiency chain, a stochastic draft model fitted to the co-designed library, an hourly solar + wind + battery simulator on six sites, a polygon coverage planner on a 50-field corpus, a contact-pressure compaction model, a discounted cash-flow economics engine with battery replacement and life-cycle CO2, and a global sensitivity analysis on 20 inputs. An operating-envelope sweep and an architectural-variant comparison close the loop. The full implementation is open source. Applied to the codesigned reference, the framework yields energy, compaction advantages and potential off-grid operation.

Autonomous mobile service robots, such as lawnmowers or cleaning robots, operating in human-populated environments need to reason about human-human interactions to support safe and socially aware navigation. For such systems, interaction understanding is not primarily a fine-grained recognition problem, but a perception problem under limited sensing quality and computational resources. Many existing approaches focus on holistic group activity recognition, often relying on complex and computationally expensive models that are not well suited for mobile robotic platforms. In this work, we argue that pairwise human interactions constitute a minimal yet sufficient perceptual unit for robot-centric social understanding. We study the problem of identifying interacting person pairs and classifying coarse-grained interaction behaviors sufficient for downstream group-level reasoning and robot decision-making. To this end, we adopt a two-stage framework in which candidate interacting pairs are first identified using lightweight geometric and motion cues, and interaction types are subsequently classified using a relation network. We evaluate the proposed approach on the JRDB dataset, where it achieves competitive performance with reduced computational cost and model size compared to appearance-based methods. Additional experiments on the Collective Activity Dataset (CAD) and zero-shot evaluation on a lawnmower-collected dataset further demonstrate the generalizability of the proposed framework. These results suggest that simple geometric and motion cues provide a practical and efficient basis for interaction-aware perception in mobile service robots. Code is released.

Crop monitoring is essential for precision agriculture, but current systems lack high-level reasoning. We introduce a novel, modular framework that uses a Vision Language Model (VLM) to guide robotic task planning by actively querying heterogeneous data sources, including enriched RGB camera feeds and 2D semantic occupancy maps, interleaved with robotic action primitives. We contribute a comprehensive benchmark for short- and long-horizon crop monitoring tasks in monoculture and polyculture environments. Our results show that while zero-shot VLMs perform robustly for short-horizon tasks (achieving 87% success, comparable to human experts), success drops significantly to under 10% for complex long-horizon, multi-target tasks. Despite this decline, task completion rates remain above 76% under noiseless conditions. Critically, the system degrades when relying on noisy semantic maps, demonstrating a key limitation in current VLM context grounding for sustained robotic operations. This work offers a deployable framework and critical insights into VLM capabilities and shortcomings for complex agricultural robotics.

Vision-language models achieve strong performance across a wide range of multimodal understanding and reasoning tasks, yet their multi-step reasoning remains unstable. Repeated sampling over the same input often produces divergent reasoning trajectories and inconsistent final predictions. To address this, we introduce two complementary approaches inspired by test-time scaling: (1) CASHEW, an inference-time framework that stabilizes reasoning by iteratively aggregating multiple candidate trajectories into higher-quality reasoning traces, with explicit visual verification filtering hallucinated steps and grounding reasoning in visual evidence, and (2) CASHEW-RL, a learned variant that internalizes this aggregation behavior within a single model. CASHEW-RL is trained using Group Sequence Policy Optimization (GSPO) with a composite reward that encourages correct answers grounded in minimal yet sufficient visual evidence, while adaptively allocating reasoning effort based on task difficulty. This training objective enables robust self-aggregation at inference. Extensive experiments on 13 image understanding, video understanding, and video reasoning benchmarks show significant performance improvements, including gains of up to +26.2 percentage points on ScienceQA and +9.1 percentage points on EgoSchema.

We present a large-scale unmanned aerial vehicle (UAV)-based RGB and multispectral image dataset collected over paddy fields in the Vijayawada region, Andhra Pradesh, India, covering nursery to harvesting stages. We used a 20-megapixel RGB camera and a 5-megapixel four-band multispectral camera capturing red, green, red-edge, and near-infrared bands. Standardised operating procedure (SOP) and checklists were developed to ensure repeatable data acquisition. Our dataset comprises of 42,430 raw images (415 GB) captured over 5 acres with 1 cm/pixel ground sampling distance (GSD) with associated metadata such as GPS coordinates, flight altitude, and environmental conditions. Captured images were validated using Pix4D Fields to generate orthomosaic maps and vegetation index maps, such as normalised difference vegetation index (NDVI) and normalised difference red-edge (NDRE) index. Our dataset is one of the few datasets that provide high-resolution images with rich metadata that cover all growth stages of Indian paddy crops. The dataset is available on IEEE DataPort with DOI, . It can support studies on targeted spraying, disease analysis, and yield estimation.

Agricultural decision-making faces a dual challenge: sustaining high yields to meet global food security needs while reducing the environmental impacts of input use, including fertilizer losses and other agrochemical applications such as herbicides, insecticides, and fungicides. Nitrogen inputs are central to this tension. They are indispensable for crop growth yet major drivers of greenhouse gas emissions, nutrient runoff, and escalating production costs. Addressing these intertwined pressures requires adaptive decision-support tools that are statistically principled, economically sustainable and interpretable for practitioners. We develop nonlinear model-based bandit algorithms as a framework for adaptive fertilizer management under uncertainty. Building on classical mechanistic yield-response models, our approach links algorithmic exploration-exploitation strategies directly to interpretable biological processes such as maximum yield and nutrient efficiency. This grounding makes recommendations transparent for practitioners while supporting cost-effective and sustainable input use. Methodologically, we establish regret and sample complexity results for the well-specified nonlinear case, examine robustness under misspecification, and evaluate the proposed methods through profit-oriented simulations and an offline replay case study on publicly available multi-site corn nitrogen field trials from the U.S. Midwest. The results show that incorporating biologically meaningful mechanistic structure enables faster learning and higher profit as evidence accumulates, with flexible nonparametric baselines providing a competitive alternative in pooled and heterogeneous settings. Our findings illustrate how interpretable, uncertainty-aware sequential decision rules can support economically sustainable fertilizer recommendations and contribute to more efficient agricultural input use.

Existing plant-disease datasets target classification and detection, leaving vision-language models unable to support interactive, reasoning-based diagnosis. To address this, we present PlantExpertVQA, a large-scale visual question answering (VQA) dataset designed to advance vision-language models for agricultural decision-making. It is compiled from 45 open-source datasets, including the widely used PlantVillage corpus, and comprises 765,186 high-quality question-answer (QA) pairs grounded over 150,841 images spanning 38 crop species and 89 disease conditions. Questions are organized into 3 levels of cognitive complexity and 9 distinct categories. Each was phrased following expert guidance and generated via an automated two-stage pipeline: template-based QA synthesis from image metadata, followed by multi-stage linguistic re-engineering. The dataset was iteratively reviewed by domain experts for scientific accuracy and relevance. We find that current frontier vision-language models, including recent open-source instruction-tuned multimodal LLMs, perform poorly on PlantExpertVQA. However, parameter-efficient fine-tuning of a compact 2B-parameter model on a small fraction of the dataset yields substantial improvements across all question categories, demonstrating its effectiveness for domain adaptation.

Driven by the need to address labor shortages and meet the demands of a rapidly growing population, robotic automation has become a critical component in precision agriculture. Leaf-level hyperspectral spectroscopy is shown to be a powerful tool for phenotyping, monitoring crop health, identifying essential nutrients within plants as well as detecting diseases and water stress. This work introduces RoMu4o, a robotic manipulation unit for orchard operations offering an automated solution for proximal hyperspectral leaf sensing. This ground robot is equipped with a 6DOF robotic arm and vision system for real-time deep learning-based image processing and motion planning. We developed robust perception and manipulation pipelines that enable the robot to successfully grasp target leaves and perform spectroscopy. These frameworks operate synergistically to identify and extract the 3D structure of leaves from an observed batch of foliage, propose 6D poses, and generate collision-free constraint-aware paths for precise leaf manipulation. The end-effector of the arm features a compact design that integrates an independent lighting source with a hyperspectral sensor, enabling high-fidelity data acquisition while streamlining the calibration process for accurate measurements. Our ground robot is engineered to operate in unstructured orchard environments. However, the performance of the system is evaluated in both indoor and outdoor plant models. The system demonstrated reliable performance for 1-LPB hyperspectral sampling, achieving 95% success rate in lab trials and 79% in field trials. Field experiments revealed an overall success rate of 70% for autonomous leaf grasping and hyperspectral measurement in a pistachio orchard.

Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.