Radar-Based Human Pose Estimation

Assistive robots and search-and-rescue platforms require reliable human state sensing in smoke, darkness, and privacy-sensitive environments, where cameras and LiDAR may be unreliable Millimeter-wave radar offers an alternative that works without ambient light, penetrates smoke, and does not capture visual appearance. However, the compact arrays that fit robot size, power, and cost budgets have limited apertures, producing joint-localization errors on the order of decimeters at a few meters, large enough to compromise the safety margins and tracking accuracy a robot depends on. Existing pipelines reduce pose error through frame fusion, multiple viewpoints, return selection, or stronger estimators, but examine one technique at a time, without relating its effect to a shared measurement limit or separating gains from added information from gains from estimator completion. We address this gap with a framework that models the human and environment as one time-varying scattering field and states a Cramer-Rao type error floor for joint localization as a function of bandwidth, aperture, signal-to-noise ratio, fused frame count, phase coherence, and visibility of retained returns. We then use existing frame fusion, multi viewpoint, return selection, and pose estimation methods as matched probes of this floor rather than as competing pipelines. Under the evaluated conditions, experiments on three datasets and a live deployment show these strategies move joint localization error in the predicted directions, for example lowering mean per-joint position error from about 97 to 65 mm with a second viewpoint, while a stronger estimator mainly lowers overall error by completing joints the measurement cannot resolve. These results give the robotics community a principled basis for deciding whether to prioritize observation design or estimator capacity when deploying reliable mmWave human sensing.

Human pose estimation under adverse lighting and occlusion conditions remains challenging for camera- and LiDAR-based systems. Although mmWave radars provide robustness to illumination and occlusion, they rely on dedicated hardware and licensed spectrum, limiting scalability. In this paper, we present RadPose, a learning-based monostatic integrated sensing and communication (ISAC) framework that enables mmWave communication devices to perform 3D human pose estimation. Unlike specialized radars, RadPose leverages monostatic full-duplex operation to extract channel impulse responses (CIRs) directly from standard OFDM communication signals, generating 3D radio point clouds without additional sensing hardware. To address the sparsity and noise of RF observations, RadPose employs a cross-frame transformer-based pose inference network with semantic-guided spatial attention and target-driven temporal attention for robust spatio-temporal aggregation. It further adopts a joint-aware inverse kinematics refinement module based on graph convolution to enforce skeletal topology, bone-length consistency, and anatomical plausibility. Extensive experiments demonstrate RadPose achieves competitive accuracy compared to state-of-the-art radar-based approaches while maintaining robust performance in unseen and occluded scenarios. The dataset and source code are available at https://github.com/Geo-Chou/RadPose.

3D Human Pose Estimation (3D HPE) is used in indoor environments, such as smart homes, to analyze human movement and monitor human states. Millimeter-wave (mmWave) radar is suitable for this task because it is robust to lighting variations and does not capture images of human appearance. However, radar observations often provide insufficient information about certain body parts or contain overlapping reflections from multiple body parts, limiting accurate 3D joint localization. To address these limitations, we propose the Initialization-to-Refinement Pose Framework (I2R-Pose), comprising two stages: Motion-Aware Pose Initialization and Observation-Guided Refinement. In the first stage, joint-wise features are learned by incorporating temporal relationships across consecutive radar observations and human skeletal structure to compensate for insufficient joint information and estimate an initial 3D pose sequence. In the second stage, separately extracted radar observation features predict joint-wise positional corrections that refine the initial pose and generate the final pose sequence. The framework supports individual and fused inputs of time-Doppler/time-range (TD/TR) maps and radar point clouds (PCs). To evaluate performance across indoor activities, we construct the Radar Motion and Spatial Information for 3D Human Pose Estimation (RaMoS-Pose) dataset, providing synchronized TD/TR maps, radar PCs, and 3D joint ground truth (GT). Evaluations on RaMoS-Pose and the publicly available MVDoppler-Pose dataset show that I2R-Pose reduces mean per-joint position error (MPJPE) by 39.50% on MVDoppler-Pose and by 15.13% on RaMoS-Pose with fused inputs, compared with the best-performing existing methods evaluated on each dataset.

Sparse and noisy millimeter-wave radar point cloud observations often correspond to multiple plausible human poses, making deterministic pose estimation fundamentally ill-posed. Yet existing radar methods remain deterministic, collapsing this ambiguity into a single estimate. Diffusion-based alternatives can model multi-hypothesis distributions but require costly sequential denoising for each sample and lack calibrated uncertainty. We propose Multi-Hypothesis Normalizing Flow Pose Generator (MH-NFPG), which models pose distributions from radar point clouds using a conditional normalizing flow. Specifically, we combine a spatiotemporal transformer backbone with a normalizing flow that transforms a Laplace base distribution into an expressive posterior, generated in parallel through a single forward pass. Leveraging this efficiency, we outperform diffusion-based alternatives in calibration across three radar benchmarks (MM-Fi, mmRadPose, mRI) at comparable pose accuracy, while achieving up to 22x faster inference and reducing calibration error by up to 84%. We find that calibration degrades substantially for diffusion models, whereas our flow-based approach maintains reliable coverage, also across environments. These results demonstrate normalizing flows as a practical alternative to diffusion models for real-time, uncertainty-aware radar pose estimation. Our code is available at https://github.com/jonasmueler/YouOnlyFlowOnce_WACV.

Radar-based human pose estimation has focused on improving learning algorithms while representing the body as unconstrained keypoint coordinates. We address the underexplored dimension of anatomical fidelity by integrating a full-body skeletal model into a differentiable, end-to-end trainable radar-based pose estimation framework, in which the pose network is supervised through forward kinematics while subject-specific geometry is fitted beforehand. Subject-specific body segment proportions are predicted from radar point cloud features to scale a biomechanical skeleton. A motion prediction network maps temporal radar sequences to generalized coordinates, and differentiable forward kinematics converts predicted joint angles into 3D positions. A contact classification loss encourages physically plausible foot-ground interaction. Under leave-one-subject-out cross-validation on 11 healthy participants performing rehabilitation exercises, the framework achieves 6.456 +/- 1.759 cm mean per-joint position error (MPJPE), 8.083 +/- 0.884 degrees mean per-joint angle error (MPJAE), 0.935 +/- 0.009 contact classification F1, and 3.4 +/- 1.3 % scaling error. This proof-of-concept study demonstrates the feasibility of recovering interpretable biomechanical descriptors from a single low-cost radar sensor in a controlled laboratory setting, a prerequisite for future clinical motion analysis.

Millimeter-wave (mmWave) radar enables privacy-friendly human sensing, but its sparse point clouds are physical measurements of view-dependent electromagnetic reflections and only indirectly characterize body articulation. Recovering a complete 3D pose from such partial, geometry-dependent observations is therefore under-constrained. Existing methods directly regress joint coordinates from paired radar-pose data, relying on the same limited paired supervision to learn radar perception, human-body structure, and their alignment. This coupling can encourage dataset-specific shortcuts under ambiguous radar observations. We propose Wave2Body, a radar-to-body token translation framework that decouples these learning targets using a self-supervised mmWave tokenizer, a pretrained compositional body tokenizer that defines the output space, and a lightweight translator between them. Experiments on M4Human and mmBody show that Wave2Body achieves stronger cross-domain generalization than previous methods while incurring much lower computational costs for training and inference. All the code and experiment results are publicly available at https://github.com/Galaxywalk/Wave2Body.

Millimetre-wave (mmWave) radar offers a more privacy-preserving alternative to RGB-based human pose estimation. However, existing methods typically rely on pre-extracted intermediate representations such as sparse point clouds or spectrogram images, where the rich spatiotemporal information naturally present in radar video streams is discarded for model learning, while such signal processing adds system complexity. In addition, existing solutions are mainly conducted in an end-to-end supervised manner without leveraging unlabelled raw video streams to learn generalized representations. In this study, we present MAEPose, a masked autoencoding-based human pose estimation approach that operates directly on mmWave spectrogram videos. MAEPose learns spatiotemporal motion-aware generalized representations from unlabelled radar video, and leverages its heatmap decoder for multi-frame pose estimation predictions. We evaluate it across three datasets based on leave-one-person-out cross-validation with rigorous statistical testing. MAEPose consistently outperforms state-of-the-art baselines by up to 22.1% in MPJPE p<0.05, and maintains robust accuracy under zero-shot bystander interference with only a 6.5% error increase. Ablation studies confirm that both the pre-training and the heatmap decoder contribute substantially, while modality analysis indicates that leveraging Range-Doppler video as input achieves better pose estimation performance than Range-Azimuth or their fusion, with lower computational cost.

Pose estimation and human action recognition (HAR) are pivotal technologies spanning various domains. While the image-based pose estimation and HAR are widely admired for their superior performance, they lack in privacy protection and suboptimal performance in low-light and dark environments. This paper exploits the capabilities of millimeter-wave (mmWave) radar technology for human pose estimation by processing radar data with Graph Neural Network (GNN) architecture, coupled with the attention mechanism. Our goal is to capture the finer details of the radar point cloud to improve the pose estimation performance. To this end, we present a unique feature extraction technique that exploits the full potential of the GNN processing method for pose estimation. Our model mmGAT demonstrates remarkable performance on two publicly available benchmark mmWave datasets and establishes new state of the art results in most scenarios in terms of human pose estimation. Our approach achieves a noteworthy reduction of pose estimation mean per joint position error (MPJPE) by 35.6% and PA-MPJPE by 14.1% from the current state of the art benchmark within this domain.