RF Fingerprint Identification

Radio frequency fingerprinting (RFF) models can achieve accuracy under source domain conditions but become unreliable when the receiver, distance, collection day, or environment changes. Incorrect predictions in unseen domains may receive high softmax confidence, making confidence thresholding insufficient for trustworthy deployment. We propose TrustAgent-RFF, a prediction level reliability framework for RFF that operates with a frozen in-phase and quadrature (I/Q) classifier without target domain labels. For each device prediction, the framework acquires radio frequency evidence: counterfactual stability, prototype consistency, acquisition domain similarity, and signal quality. A source calibrated trust estimator combines these diagnostics with classifier confidence, prediction margin, and evidence availability indicators. Source derived lower tail penalties and cross module interactions reduce trust when diagnostic signals indicate weak support. A large language model (LLM) based planner adaptively selects the next diagnostic action based on evidence, trust state, action costs, and remaining budget. A deterministic source calibrated decision layer updates the prediction state as Accept, Reject, or Defer. Experiments across five RFF datasets and classifier backbones reveal an average source to target accuracy drop of 38.7% and show that many incorrect target domain predictions remain highly confident.

Radio frequency fingerprinting aims to identify transmitters by exploiting small differences in the emitted signal waveform. Common approaches exploit hardware-dependent imperfections for that purpose. This work instead investigates whether differences between digital signal processing implementations of a transmitter can be identified from their radiated signals. As a practical case study, five different software-based DSP implementations for generating a 2-FSK RTTY communication waveform are considered. In a monitoring receiver, a classifier can identify these DSP implementations using convolutional neural networks that are trained on augmented software-generated signals represented as raw IQ, power spectrum or instantaneous frequency. The trained networks are evaluated on over-the-air recordings obtained using a shortwave transceiver and a software-defined radio receiver. The best neural network combines IQ and the power spectrum representation and achieves an accuracy of up to 90%. The study further examines the influence of the signal SNR and the observation bandwidth on the classification accuracy. The results demonstrate that DSP implementations leave distinguishable characteristics in the transmitted signals and suggest that DSP-dependent fingerprinting can provide complementary information for specific emitter identification systems.

Radio Frequency(RF)-Fingerprinting is a spectrum monitoring technique that identifies specific transmitters based on hardware impairments imprinted within the emitted signal. Although widely researched, studies almost exclusively consider scenarios where only one transmitter is emitting at a time, limiting real world applicability. In this work, we further the study of RF-Fingerprinting by considering co-channel interference, with multiple emitted signals interfering with each other, overlapping in time and frequency. Specifically, we formulate this problem as a multi-label classification problem and employ a 1D convolutional neural network (CNN). Furthermore, the models are calibrated such that the confidence thresholds for the label probabilities are derived, with guarantees on the upper bound on the average number of False Negatives, providing a degree of confidence in not missing a true spectrum policy violation. The proposed method is validated using real world data from the POWDER 5G testbed on devices transmitting 802.11a(Wi-Fi), 4G LTE, and 5G NR waveforms. The results show accuracy as high as 97% and as low as 73% after calibration depending on channel conditions. Also calibrating for various average false negatives upper bounds achieves micro recall scores of approximately (1 - calibrated false negatives) with the calibration robust to out-of-distribution interference, demonstrating the potential of the proposed method in a realistic high contention wireless environment

Radio frequency (RF) fingerprinting authenticates wireless devices from hardware-induced I/Q impairments, typically with deep learning feature extractors that are accurate but opaque, limiting their use in security critical settings. We propose Polar Monotonic Kolmogorov-Arnold Networks (Polar MKAN), a block partitioned monotonic encoder on polar inputs in which each latent dimension depends exclusively on magnitude or phase, yielding channel separation and monotone responses by construction. On a synthetic gain and carrier frequency offset (CFO) benchmark, Polar MKAN reaches 57.2 percent DCI Disentanglement versus at most 12.9 percent for unpartitioned baselines. We further evaluate the detection accuracy trade off on real data and the sensitivity to blind CFO compensation.

Radio Frequency Fingerprinting (RFFP) has emerged as a promising approach for device authentication by exploiting hardware-specific impairments embedded in transmitted signals. Yet existing methods largely overlook a major drawback: RFFP sensitivity to temperature--a critical factor influenced by both internal and environmental conditions--which can significantly alter device signatures and degrade classification performance. In this paper, we propose a novel temperature-aware RFFP framework that explicitly incorporates device temperature information into the learning process to improve robustness and generalization. We evaluate the proposed method on a real-world Bluetooth Low Energy (BLE) dataset collected across multiple devices and environmental conditions. Experimental results demonstrate that temperature-aware modeling consistently outperforms other temperature mitigation baselines, achieving significant improvements in classification accuracy, particularly under unseen temperature and environmental conditions.

Radio frequency fingerprint identification (RFFI) exploits transmitter-specific hardware imperfections as physicallayer identity cues for Internet of Things (IoT) devices, but deep models often degrade across acquisition environments. In multi-antenna reception, antenna topology and frequencyoffset dynamics structure receiver observations, while capturedependent variation distorts target embeddings and misaligns source-trained decision boundaries. This article proposes physicsinformed structure anchoring with capture-aware prototype calibration (PISA-CAPC) to address both representation and decision mismatches. The two stages separate source representation construction from target decision correction. During source training, PISA organizes antenna tokens through a topology-guided graph, conditions propagation on CFO-derived acquisition dynamics, and applies bounded contextual residual suppression to preserve identity evidence. At deployment, unlabeled capture-aware prototype calibration (U-CAPC) estimates capture-local prototypes and recalibrates target decision scores while keeping the representation and source classifier fixed. Thus, calibration uses neither target labels nor target-domain backbone updates. On a measured WiFi benchmark with four receive antennas and ten transmitters, PISA-CAPC achieves a mean target-domain Macro-F1 of 0.9257 under a balanced transductive setting. Component ablations support complementary roles for topology-guided anchoring, CFO-conditioned modulation, reliability-aware token aggregation, contextual suppression, and capture-aware calibration. These results indicate that physically motivated representation learning can be combined with labelfree decision calibration to improve cross-environment RFFI under the evaluated protocol without changing the deployed backbone.

Radio frequency fingerprint identification (RFFI) provides a critical physical-layer security mechanism for dynamic Internet of Things (IoT) and ad hoc networks. However, the decentralized and open nature of these networks imposes two strict deployment criteria: the credential must transfer reliably across physically dispersed, heterogeneous receivers, and it must decisively reject unregistered rogue traffic. Cross-receiver hardware shifts depress the confidence of registered devices and may also place unseen rogue transmitters in high-confidence known regions under naive domain adaptation, increasing false acceptance. To address these risks, we propose CRODA-ST, a joint optimization framework that couples Discriminative Structure Anchoring (DSA) with Rejection Oriented Alignment (ROA). Within this coupled objective, DSA establishes a stable target-known semantic foundation for shifted registered devices, while ROA regularizes the open-set decision boundaries governing rejection of unseen rogue transmitters. In the canonical WiSig setting, CRODA-ST achieves an open-set classification rate (OSCR) of 0.9580 and a target-domain false positive rate of 0.0469 at a 90% true positive rate (FPR90). A controllable LoRa simulation provides a complementary diagnostic under synthesized hardware distortions. At the distinct source-calibrated deployment operating point with rho = 0.80, CRODA-ST yields a target-unknown false acceptance rate (FAR) of 0.0075 in the evaluated setting.

Radio-frequency (RF) fingerprinting systems must operate in open-world environments where signals from unknown transmitters and temporal drift introduce distribution shift at test time. Out-of-distribution (OOD) detection provides a natural framework for this problem, yet its application to RF fingerprinting (RFF) remains limited. A key barrier to their adoption is that most OOD detectors require auxiliary OOD data for parameter tuning, an assumption that is difficult to satisfy in RF environments where representative OOD data is impractical to collect. In this work, we introduce a promising set of OOD detection methods from the machine learning literature to open-set RFF domain. We present these methods within a unified mathematical framework based on information theory, which is a natural framework for communication systems. Our framework allows for the systematic analysis of methods and development of new methods. We further demonstrate the applicability of recent work on tuning OOD detectors without given OOD tuning data for open-set RFF. We evaluate on the POWDER RF fingerprinting dataset, showing that detectors tuned without any given OOD data achieve performance comparable to baselines with access to true OOD tuning data and greatly out-perform baseline approaches without access to true OOD tuning data, showcasing the practical viability for the RFF problem.

Radio-frequency (RF) fingerprinting identifies wire-less transmitters using hardware-induced imperfections present in baseband I/Q signals. However, deep learning models often degrade under receiver and channel distribution shifts, particularly as transmitter populations grow. This work proposes the Hamiltonian Transformer, a physics-informed attention architecture that enforces norm preserving value dynamics within each attention head using a learned skew-symmetric generator and a Störmer-Verlet leapfrog integration step. An additional phase-increment embedding exposes oscillator dynamics at the input layer. All experiments use non-equalized raw I/Q signals from the WiSig dataset under four protocols: same-day classification, cross-receiver generalisation, cross-day generalisation, and transmitter scaling up to 150 devices. The Hamiltonian Transformer achieves 99.12% accuracy under same-day conditions and 61.64% at 150 transmitters, consistently outperforming CNN and Transformer baselines across all scale points. A controlled ablation study identifies norm-preservation in the value update as the primary inductive bias driving the scaling advantage, with the phase increment embedding providing the single largest per-component improvement. These results indicate that embedding physics-informed structural priors into attention mechanisms is an effective approach to large-scale transmitter identification on raw wireless signals.

Radio frequency fingerprints (RFFs) enable secure wireless authentication but struggle in open-set scenarios with unknown devices and varying channels. Existing methods face challenges in generalization and incur high computational costs. We propose a lightweight, self-adaptive RFF extraction framework using Low-Rank Adaptation (LoRA). By pretraining LoRA modules per environment, our method enables fast adaptation to unseen channel conditions without full retraining. During inference, a weighted combination of LoRAs dynamically enhances feature extraction. Experimental results demonstrate a 15% reduction in equal error rate (EER) compared to non-finetuned baselines and an 83% decrease in training time relative to full fine-tuning, using the same training dataset. This approach provides a scalable and efficient solution for open-set RFF authentication in dynamic wireless vehicular networks.

Device recognition is vital for security in wireless communication systems, particularly for applications like access control. Radio Frequency Fingerprint Identification (RFFI) offers a non-cryptographic solution by exploiting hardware-induced signal distortions. This paper proposes HyDRA, a Hybrid Dual-mode RF Architecture that integrates an optimized Variational Mode Decomposition (VMD) with a novel architecture based on the fusion of Convolutional Neural Networks (CNNs), Transformers, and Mamba components, designed to support both closed-set and open-set classification tasks. The optimized VMD enhances preprocessing efficiency and classification accuracy by fixing center frequencies and using closed-form solutions. HyDRA employs the Transformer Dynamic Sequence Encoder (TDSE) for global dependency modeling and the Mamba Linear Flow Encoder (MLFE) for linear-complexity processing, adapting to varying conditions. Evaluation on public datasets demonstrates state-of-the-art (SOTA) accuracy in closed-set scenarios and robust performance in our proposed open-set classification method, effectively identifying unauthorized devices. Deployed on NVIDIA Jetson Xavier NX, HyDRA achieves millisecond-level inference speed with low power consumption, providing a practical solution for real-time wireless authentication in real-world environments. The source code is published on https://github.com/Crazy-Bull/HyDRA.