Semantic Communication

To support latency-sensitive Internet of Vehicles (IoV) applications amidst dynamic environments and intermittent links, this paper proposes a Reconfigurable Intelligent Surface (RIS)-aided semantic-aware Vehicle Edge Computing (VEC) framework. This approach integrates RIS to optimize wireless connectivity and semantic communication to minimize latency by transmitting semantic features. We formulate a comprehensive joint optimization problem by optimizing offloading ratios, the number of semantic symbols, and RIS phase shifts. Considering the problem's high dimensionality and non-convexity, we propose a two-tier hybrid scheme that employs Proximal Policy Optimization (PPO) for discrete decision-making and Linear Programming (LP) for offloading optimization. {The simulation results have validated the proposed framework's superiority over existing methods. Specifically, the proposed PPO-based hybrid optimization scheme reduces the average end-to-end latency by approximately 40% to 50% compared to Genetic Algorithm (GA) and Quantum-behaved Particle Swarm Optimization (QPSO). Moreover, the system demonstrates strong scalability by maintaining low latency even in congested scenarios with up to 30 vehicles.

Vehicular edge intelligence (VEI) is vital for future intelligent transportation systems. However, traditional centralized learning in dynamic vehicular networks faces significant communication overhead and privacy risks. Split federated learning (SFL) offers a distributed solution but is often hindered by substantial communication bottlenecks from transmitting high-dimensional intermediate features and can present label privacy concerns. Semantic communication offers a transformative approach to alleviate these communication challenges in SFL by focusing on transmitting only task-relevant information. This paper leverages the advantages of semantic communication in the design of SFL, and presents a case study the semantic communication-enhanced U-Shaped split federated learning (SC-USFL) framework that inherently enhances label privacy by localizing sensitive computations with reduced overhead. It features a dedicated semantic communication module (SCM), with pre-trained and parameter-frozen encoding/decoding units, to efficiently compress and transmit only the task-relevant semantic information over the critical uplink path from vehicular users to the edge server (ES). Furthermore, a network status monitor (NSM) module enables adaptive adjustment of the semantic compression rate in real-time response to fluctuating wireless channel conditions. The SC-USFL framework demonstrates a promising approach for efficiently balancing communication load, preserving privacy, and maintaining learning performance in resource-constrained vehicular environments. Finally, this paper highlights key open research directions to further advance the synergy between semantic communication and SFL in the vehicular network.

Token Communication (TokenCom) is a new paradigm, motivated by the recent success of Large AI Models (LAMs) and Multimodal Large Language Models (MLLMs), where tokens serve as unified units of communication and computation, enabling efficient semantic- and goal-oriented information exchange in future wireless networks. In this paper, we propose a novel Video TokenCom framework for textual intent-guided multi-rate video communication with Unequal Error Protection (UEP)-based source-channel coding adaptation. The proposed framework integrates user-intended textual descriptions with discrete video tokenization and unequal error protection to enhance semantic fidelity under restrictive bandwidth constraints. First, discrete video tokens are extracted through a pretrained video tokenizer, while text-conditioned vision-language modeling and optical-flow propagation are jointly used to identify tokens that correspond to user-intended semantics across space and time. Next, we introduce a semantic-aware multi-rate bit-allocation strategy, in which tokens highly related to the user intent are encoded using full codebook precision, whereas non-intended tokens are represented through reduced codebook precision differential encoding, enabling rate savings while preserving semantic quality. Finally, a source and channel coding adaptation scheme is developed to adapt bit allocation and channel coding to varying resources and link conditions. Experiments on various video datasets demonstrate that the proposed framework outperforms both conventional and semantic communication baselines, in perceptual and semantic quality on a wide SNR range.

Internet of Things (IoT) networks face significant challenges such as limited communication bandwidth, constrained computational and energy resources, and highly dynamic wireless channel conditions. Utilization of deep neural networks (DNNs) combined with semantic communication has emerged as a promising paradigm to address these limitations. Deep joint source-channel coding (DJSCC) has recently been proposed to enable semantic communication of images. Building upon the original DJSCC formulation, low-complexity attention-style architectures has been added to the DNNs for further performance enhancement. As a main hurdle, training these DNNs separately for various signal-to-noise ratios (SNRs) will amount to excessive storage or communication overhead, which can not be maintained by small IoT devices. SNR Adaptive DJSCC (ADJSCC), has been proposed to train the DNNs once but feed the current SNR as part of the data to the channel-wise attention mechanism. We improve upon ADJSCC by a simultaneous utilization of doubly adaptive channel-wise and spatial attention modules at both transmitter and receiver. These modules dynamically adjust to varying channel conditions and spatial feature importance, enabling robust and efficient feature extraction and semantic information recovery. Simulation results corroborate that our proposed doubly adaptive DJSCC (DA-DJSCC) significantly improves upon ADJSCC in several performance criteria, while incurring a mild increase in complexity. These facts render DA-DJSCC a desirable choice for semantic communication in performance demanding but low-complexity IoT networks.

Semantic communication aims to convey meaning for effective task execution, but differing latent representations in AI-native devices can cause semantic mismatches that hinder mutual understanding. This paper introduces a novel approach to mitigating latent space misalignment in multi-agent AI- native semantic communications. In a downlink scenario, we consider an access point (AP) communicating with multiple users to accomplish a specific AI-driven task. Our method implements a protocol that shares a semantic pre-equalizer at the AP and local semantic equalizers at user devices, fostering mutual understanding and task-oriented communication while considering power and complexity constraints. To achieve this, we employ a federated optimization for the decentralized training of the semantic equalizers at the AP and user sides. Numerical results validate the proposed approach in goal-oriented semantic communication, revealing key trade-offs among accuracy, com- munication overhead, complexity, and the semantic proximity of AI-native communication devices.

Semantic communication promises task-aligned transmission but must reconcile semantic fidelity with stringent latency guarantees in immersive and safety-critical services. This paper introduces a time-constrained human-in-the-loop reinforcement learning (TC-HITL-RL) framework that embeds human feedback, semantic utility, and latency control within a semantic-aware Open radio access network (RAN) architecture. We formulate semantic adaptation driven by human feedback as a constrained Markov decision process (CMDP) whose state captures semantic quality, human preferences, queue slack, and channel dynamics, and solve it via a primal--dual proximal policy optimization algorithm with action shielding and latency-aware reward shaping. The resulting policy preserves PPO-level semantic rewards while tightening the variability of both air-interface and near-real-time RAN intelligent controller processing budgets. Simulations over point-to-multipoint links with heterogeneous deadlines show that TC-HITL-RL consistently meets per-user timing constraints, outperforms baseline schedulers in reward, and stabilizes resource consumption, providing a practical blueprint for latency-aware semantic adaptation.

Remote Operation is touted as being key to the rapid deployment of automated vehicles. Streaming imagery to control connected vehicles remotely currently requires a reliable, high throughput network connection, which can be limited in real-world remote operation deployments relying on public network infrastructure. This paper investigates how the application of computer vision assisted semantic communication can be used to circumvent data loss and corruption associated with traditional image compression techniques. By encoding the segmentations of detected road users into colour coded highlights within low resolution greyscale imagery, the required data rate can be reduced by 50% compared with conventional techniques, while maintaining visual clarity. This enables a median glass-to-glass latency of below 200 ms even when the network data rate is below 500 kbit/s, while clearly outlining salient road users to enhance situational awareness of the remote operator. The approach is demonstrated in an area of variable 4G mobile connectivity using an automated last-mile delivery vehicle. Results indicate that large-scale deployment of remotely operated automated vehicles could be possible even on the often constrained public 4G/5G mobile network, providing the potential to expedite the nationwide roll-out of automated vehicles.

Semantic communication is a novel communication paradigm that focuses on conveying the user's intended meaning rather than the bit-wise transmission of source signals. One of the key challenges is to effectively represent and extract the semantic meaning of any given source signals. While deep learning (DL)-based solutions have shown promising results in extracting implicit semantic information from a wide range of sources, existing work often overlooks the high computational complexity inherent in both model training and inference for the DL-based encoder and decoder. To bridge this gap, this paper proposes a rate-distortion-complexity (RDC) framework which extends the classical rate-distortion theory by incorporating the constraints on semantic distance, including both the traditional bit-wise distortion metric and statistical difference-based divergence metric, and complexity measure, adopted from the theory of minimum description length and information bottleneck. We derive the closed-form theoretical results of the minimum achievable rate under given constraints on semantic distance and complexity for both Gaussian and binary semantic sources. Our theoretical results show a fundamental three-way tradeoff among achievable rate, semantic distance, and model complexity. Extensive experiments on real-world image and video datasets validate this tradeoff and further demonstrate that our information-theoretic complexity measure effectively correlates with practical computational costs, guiding efficient system design in resource-constrained scenarios.

Intelligent Transportation Systems (ITS) demand real-time collision prediction to ensure road safety and reduce accident severity. Conventional approaches rely on transmitting raw video or high-dimensional sensory data from roadside units (RSUs) to vehicles, which is impractical under vehicular communication bandwidth and latency constraints. In this work, we propose a semantic V2X framework in which RSU-mounted cameras generate spatiotemporal semantic embeddings of future frames using the Video Joint Embedding Predictive Architecture (V-JEPA). To evaluate the system, we construct a digital twin of an urban traffic environment enabling the generation of d verse traffic scenarios with both safe and collision events. These embeddings of the future frame, extracted from V-JEPA, capture task-relevant traffic dynamics and are transmitted via V2X links to vehicles, where a lightweight attentive probe and classifier decode them to predict imminent collisions. By transmitting only semantic embeddings instead of raw frames, the proposed system significantly reduces communication overhead while maintaining predictive accuracy. Experimental results demonstrate that the framework with an appropriate processing method achieves a 10% F1-score improvement for collision prediction while reducing transmission requirements by four orders of magnitude compared to raw video. This validates the potential of semantic V2X communication to enable cooperative, real-time collision prediction in ITS.

Semantic communication enhances transmission efficiency by conveying semantic information rather than raw input symbol sequences. Task-oriented semantic communication further aims to retain only task-specific information, thereby achieving greater bandwidth savings. However, these neural-network-based communication systems are vulnerable to model inversion attacks, in which adversaries attempt to recover sensitive input information from intercepted semantic features. The key challenge is therefore to preserve privacy while maintaining task accuracy and robustness. We consider a task-confidential setting in which the adversary attempts to reconstruct the original input from intercepted features without knowing the legitimate receiver's task or model. Although PSNR and SSIM are commonly used to assess reconstruction quality, we find that an external classifier can still perform the legitimate receiver's task with nontrivial accuracy on reconstructions with low PSNR or SSIM, indicating that these reconstructions still contain task-level semantic leakage. We therefore propose DiffSem, which splits the diffusion process between controlled transmitter-side self-noising and matched receiver-side reverse denoising. Experiments on the MNIST, CIFAR-10, and CelebA datasets show that DiffSem improves the legitimate receiver's task accuracy without increasing either the transmitted feature size or information leakage.

Token communications (TokenCom) is an emerging generative semantic communication paradigm, where tokens serve as compact representation units across modalities. Their contextual dependencies can be exploited by pretrained large models for semantic recovery. In this paper, we propose token-domain multiple access (ToDMA), a large-model-driven semantic multiple access scheme for massive token communications. ToDMA integrates unsourced random access with context-aware token processing. It enables massive uncoordinated devices to transmit tokenized source representations over common uplink resources. Specifically, each token index is associated with a shared modulation codeword, exposing token-level structure to the receiver for context-aware recovery. At the receiver, compressed sensing is first employed to jointly detect active tokens and estimate their corresponding channel state information (CSI) from the superposed signals. The source token sequences are then reconstructed by exploiting the consistency of token-associated CSI across multiple token positions. In the presence of token collisions, some active tokens may remain unassigned, leading to missing entries in the reconstructed token sequences. To recover these tokens, candidate-restricted masked-token prediction is performed using pretrained contextual models, thereby leveraging token-level context to mitigate collision effects. Simulation results on both image and text transmission tasks demonstrate that ToDMA reduces access latency while maintaining favorable token recovery and semantic reconstruction quality, showing its scalability for semantic multiple access.

In this paper, we introduce token communications (TokCom), a large model-driven framework to leverage cross-modal context information in generative semantic communications (GenSC). TokCom is a new paradigm, motivated by the recent success of generative foundation models and multimodal large language models (GFM/MLLMs), where the communication units are tokens, enabling efficient transformer-based token processing at the transmitter and receiver. In this paper, we introduce the potential opportunities and challenges of leveraging context in GenSC, explore how to integrate GFM/MLLMs-based token processing into semantic communication systems to leverage cross-modal context effectively at affordable complexity, present the key principles for efficient TokCom at various layers in future wireless networks. In a typical image semantic communication setup, we demonstrate a significant improvement of the bandwidth efficiency, achieved by TokCom by leveraging the context information among tokens. Finally, the potential research directions are identified to facilitate adoption of TokCom in future wireless networks.

The growing demand for efficient semantic communication systems capable of managing diverse tasks and adapting to fluctuating channel conditions has driven the development of robust, resource-efficient frameworks. This article introduces a novel channel-adaptive and multi-task-aware semantic communication framework based on a masked auto-encoder architecture. Our framework optimizes the transmission of meaningful information by incorporating a multi-task-aware scoring mechanism that identifies and prioritizes semantically significant data across multiple concurrent tasks. A channel-aware extractor is employed to dynamically select relevant information in response to real-time channel conditions. By jointly optimizing semantic relevance and transmission efficiency, the framework ensures minimal performance degradation under resource constraints. Experimental results demonstrate the superior performance of our framework compared to conventional methods in tasks such as image reconstruction and object detection. These results underscore the framework's adaptability to heterogeneous channel environments and its scalability for multi-task applications, positioning it as a promising solution for next-generation semantic communication networks.

Semantic communications aim to enhance transmission efficiency by jointly optimizing source coding, channel coding, and modulation. While prior research has demonstrated promising performance in simulations, real-world implementations often face significant challenges, including noise variability and nonlinear distortions, leading to performance gaps. This article investigates these challenges in a multiple-input multiple-output (MIMO) and orthogonal frequency-division multiplexing (OFDM)-based semantic communication system, focusing on the practical impacts of power amplifier (PA) nonlinearity and peak-to-average power ratio (PAPR) variations. Our analysis identifies frequency selectivity of the actual channel as a critical factor in performance degradation and demonstrates that targeted mitigation strategies can enable semantic systems to approach theoretical performance. By addressing key limitations in existing designs, we provide actionable insights for advancing semantic communications in practical wireless environments. This work establishes a foundation for bridging the gap between theoretical models and real-world deployment, highlighting essential considerations for system design and optimization.