Semantic Communication

Vision-language models (VLMs) and vision-language-action models (VLAs) have recently driven rapid progress in general-purpose robots, yet most progress has focused on single-robot settings. Extending these capabilities to multi-robot systems remains challenging because robots must coordinate long-horizon behaviors while maintaining reliable, fine-grained execution. We introduce DuoMind, a distributed hierarchical framework for multi-robot coordination through semantic communication. Each robot uses a VLA-based action model for low-level execution and a VLM-based orchestrator for high-level reasoning and inter-agent coordination. At each planning step, the orchestrator at each robot reasons over the task instruction, local observations, and messages received from other robots. It then generates low-level instructions for the action model and semantic messages for peer robots. This architecture exploits the complementary strengths of pretrained models by combining the semantic reasoning capabilities of VLMs with the precise action-generation capabilities of VLAs. To address the scarcity of benchmarks for multi-robot coordination, we further develop RoboPoly, a benchmark comprising long-horizon manipulation tasks that require coordinated, closed-loop execution under distributed control. Experiments on RoboPoly and RoboTwin demonstrate that DuoMind improves multi-robot task performance, while ablation studies confirm the contributions of hierarchical orchestration and semantic communication. More details are available on our project page.

Video semantic communication has attracted increasing attention as a promising approach to improving video transmission efficiency. However, most existing approaches rely on computationally intensive deep learning-based video encoders and decoders, which hinders their deployment in resource-constrained scenarios. To address this issue, we propose a lightweight semantic-aware joint source-channel optimization (SAJSCO) scheme that can be integrated into existing digital video communication systems as a plug-in module. Specifically, we develop a video communication system model in which the transmitter jointly optimizes source and channel coding parameters based on the inter-frame semantic importance of the input video and estimated channel state information. On this basis, we formulate an optimization problem that maximizes semantic importance weighted video reconstruction quality under a maximum bitrate constraint. To solve it, we first quantify inter-frame semantic importance using a cosine similarity-based metric with a shifted window mechanism. We then develop a multi-actor proximal policy optimization (MPPO) algorithm to solve the formulated problem by jointly adapting the source compression rate and channel coding rate. The learned policy can be directly applied to different video encoders without encoder-specific retraining or fine-tuning. SAJSCO achieves Bjøntegaard Delta rate reductions of 34.86% and 18.01% when integrated with H.265, a conventional video encoder, and DCVC-RT, a deep learning-based video encoder. Over-the-air experiments on a hardware testbed further demonstrate a PSNR gain of up to 1.448 dB with H.265 and an LPIPS reduction of up to 0.033 with DCVC-RT compared with the respective best-performing fixed-parameter baselines.

As autonomous systems and embodied intelligence enter the dynamic physical world, multi-agent collaboration calls for a paradigm shift in communication design. However, existing communication paradigms overlook that agents form action understanding from their own states, environmental observations, and collaboration relations through a process that evolves as a task unfolds. Consequently, reliable bit delivery, general semantic recovery, or single-task utility optimization alone cannot ensure that heterogeneous agents form coordinated actions compatible with their own conditions from shared information during task execution. To address this gap, this paper proposes embodied semantic communication (ESC) as a paradigm that transforms information transmission into action-oriented semantic interaction. Specifically, ESC characterizes how an explicit communication link can encapsulate multimodal perceptual states, intrinsic hardware capabilities, and collaborative intents into unified actionable semantic representations, thereby enabling heterogeneous receiving agents to parse, align, and ground them in local motor control. This paper clarifies the conceptual boundary, system characteristics, and environment-constrained technical pathways of ESC. It maps the underlying mathematical tools, including semantic information theory, world models, and multi-agent decision theory. Finally, this paper summarizes key open challenges, including measurable semantic reliability, ambiguity-triggered interaction under dynamic environments and tasks, and bandwidth-adaptive semantic transmission, outlining a roadmap for collective embodied networks.

Conventional satellite remote sensing transmission follows a reconstruct-then-infer paradigm that optimizes pixel-level fidelity, creating an objective mismatch with downstream tasks such as classification and detection, especially at low SNR. This paper investigates a task-oriented framework that bypasses image reconstruction and directly transmits semantic features extracted by a multitask-pretrained backbone. A lightweight channel adaptation module (CAM) compresses feature dimensionality for bandwidth reduction, and a feature restorer recovers task-relevant structure after channel corruption. With the backbone frozen, the CAM and task-specific downstream heads are jointly optimized with task and feature-level supervision under random-SNR training. Under the adopted AWGN setting, experiments on scene classification and object detection show consistent gains over reconstruction-oriented JSCC baselines across different SNR conditions, with the largest improvements in the low-SNR regime.

Classical CSI feedback in FDD massive MIMO transmits a compressed reconstruction of the channel, optimizing fidelity to the original signal regardless of the downstream task. We propose a semantic communication perspective: instead of reconstructing the channel, the UE transmits a learned \emph{semantic embedding} optimized end-to-end for beam selection at the gNB. Comparing reconstruction-oriented feedback (CsiNet) against task-aware semantic feedback across two input domains and three observation scenarios, we show that a semantic embedding of just $d=8$ real values from only 43 NR CSI-RS pilots in the angular-delay domain achieves the highest beam prediction accuracy, outperforming every method with access to the full 512-subcarrier channel. The key insight is that beam-relevant information is intrinsically low-dimensional: the semantic encoder learns to discard reconstruction-irrelevant structure and retain only a compact representation that is relevant to beam selection, realizing the core principle of semantic communication: transmit the intent, not the signal.

Emerging physical AI systems require low-latency, task-oriented video communication over unreliable channels. We propose a semantic-aware multi-level neural video coding method for robust low-latency video transmission over unreliable channels that are abstracted as multi-level packet erasure channels. Built upon the real-time DCVC-RT neural video codec, the proposed framework introduces a semantic- and feature-aware coding strategy that partitions encoded representations into packets carrying different levels of semantic and latent-feature importance and assigns these packets to different streams, each associated with a priority level when transmitted over unreliable communication channels. We also developed an error-resilient entropy model that removes inter-packet dependencies, allowing each packet to be decoded independently under packet losses. The complete system is trained end-to-end over the abstracted multi-level packet erasure channels, enabling learning of channel-aware representations together with importance-aware packet assignment while facilitating the network for differentiated packet prioritization. Experiments show that the proposed framework significantly improves robustness over baseline DCVC-RT under packet erasures, achieving graceful degradation in less important regions while better preserving task-relevant visual content.

Physical AI relies on frequently-updated, latency-sensitive video stream to perceive, reason, and interact with the physical world, resulting in strict latency requirements with much higher data volumes that existing 5G networks cannot support. Goal-oriented communication (GoC) offers as a promising approach to solve this challenge by transmitting only task-relevant semantic representations. However, existing GoC frameworks were mainly evaluated in the simulations while their effectiveness has never been validated in a practical deployment of physical AI application. In this work, we develop an end-to-end GoC testbed for Physical AI, which connects a PiPER robot arm equipped with an RGB-D camera and a 5G modem to an NVIDIA Jetson AGX Orin edge server through a 5G OpenAirInterface network. We propose and implement three GoC frameworks that transmit 3D bounding boxes, 2D scene graphs, and 3D scene graphs, as three types of semantic representations, respectively. They share the common functional modules designed for closed-loop Physical AI applications, including semantic extraction, full stack 5G transmission, language model inference, digital twin validation, and robotic control. Extensive experiments on our testbed show that our GoC frameworks reduce the task completion time by up to 52.6% and improve task success probability by up to 45%, compared to the traditional framework that periodically transmits the raw image data. These results validate the practical effectiveness of our GoC framework and pave the way for efficient and reliable Physical AI applications over future 6G networks. Project website: https://sites.google.com/view/goc-physical-ai-testbed.

Existing knowledge-base-assisted semantic communication schemes commonly adopt either single knowledge-base quantization (SKBQ) or multi-knowledge-base residual quantization (MKBQ). SKBQ incurs limited storage overhead but has restricted quantization capacity, whereas MKBQ supports progressive refinement by assigning an independent knowledge base (KB) to each stage, causing the KB storage to grow linearly with the transmission depth. To address this problem, we propose storage-scalable knowledge-base reuse quantization (SSKBQ), which reuses a compact set of KBs across multiple residual refinement stages and thereby decouples the number of transmission stages from the number of maintained KBs. A stage-aware residual supervision mechanism is further introduced to regularize intermediate quantized representations and encourage progressive refinement. Experimental results demonstrate that KB reuse provides an effective solution to the storage scalability problem while maintaining competitive progressive reconstruction performance.

Integrating generative adversarial networks (GANs) into federated semantic communication (SemCom) is a natural progression, as generative priors can recover semantic fidelity under channel distortion that discriminative decoders cannot. However, naive GAN federation introduces three failure modes that prior work has, to the best of our knowledge, neither identified nor resolved: discriminator aggregation instability under non-independent and identically distributed (non-IID) data, semantic drift caused by divergent local embedding spaces, and channel-agnostic generation that cannot adapt to heterogeneous link conditions. We propose federated generative semantic communication (FedGenSC), which mitigates all three by employing a global generator with local-only discriminators, providing cross-client semantic information through a semantic prototype bank, and conditioning generation on the instantaneous signal-to-noise ratio (SNR). Experiments on the Europarl dataset over Rayleigh fading channels (K=10 clients, Dirichlet α=0.5) show that FedGenSC under non-IID data outperforms the FedDeepSC baseline across the tested SNR range, achieving up to a 58.2% relative improvement in bilingual evaluation understudy (BLEU)-1 at 18 dB. Ablation studies confirm the independent contribution of each component.

Semantic and goal-oriented communication is increasingly studied for 6G, but generalization beyond seen data remains a key weakness under tight rate budgets. Many existing systems overfit their training data and degrade sharply at very low bit rates because they attempt to compress the entire signal. We introduce Foundation Model-Guided Semantic and Goal-Oriented Communication (FMSGOC), a framework that uses broad visual-linguistic Foundation Model priors to mitigate overfitting. It further improves rate efficiency by concentrating bits on sparse, goal-aligned anchors and relying on generative foundation-model priors to reconstruct the masked regions. By decoupling what to send from how to reconstruct, a vision-language foundation model selects and transmits a sparse set of semantic anchors, while a pretrained diffusion model, fine-tuned for masked completion, reconstructs the image at the receiver. In our experiments, FMSGOC reaches 0.039 bits per pixel (BPP), maintains high semantic fidelity (cosine similarity 0.87-0.90 on CIFAR-10), remains robust on previously unseen inputs (0.83-0.86 on ImageNet), and shows good perceptual similarity (0.1278/0.1558, CIFAR-10/ImageNet), outperforming strong end-to-end baselines at lower bit rates.

Multi-Task semantic communication (SemCom) prioritizes simultaneous execution of multiple tasks over bit-accurate reconstruction in future intelligent networks. In our prior work [1], we introduced the cooperative multi-task SemCom (CMT-SemCom) framework, in which the semantic encoder is divided into a common unit (CU) and multiple specific units (SUs) to facilitate cooperative multi-task processing. However, CMT-SemCom has been evaluated on homogeneous classification tasks on simplistic datasets, limiting its applicability to real-world perception systems. In this paper, we extend our CMT-SemCom to jointly handle heterogeneous classification and regression tasks on the complex Cityscapes dataset. We adopt the information maximization (InfoMax) principle so that it accommodates mixed discrete and continuous semantic variables. In particular, we benchmark the proposed framework against independent single-task training, a conventional task-agnostic digital transmission, and single-encoder multi-decoder SemCom. Additionally, we investigate the impact of CU capacity on joint task performance, providing design insights. Extensive evaluations demonstrate that CMT-SemCom significantly outperforms the benchmarks.

Token communications realize the semantic communication principle at the granularity of transformer tokens, providing a promising direction for client--server collaborative inference in resource-constrained edge systems. However, directly transmitting token embeddings presents two practical challenges: substantial communication cost and limited interoperability across model-specific token embedding spaces. To address these challenges, we propose a \emph{token-oriented} semantic communication framework. In this framework, token-level task relevance determines which compressed image latents are transmitted, enabling token-granular transmission without directly transmitting token embeddings. The framework is modular, coordinating three pretrained components---a lightweight client-side vision transformer (ViT), a learned image compression (LIC) model, and a large server-side ViT---without end-to-end training. The key enabler is the one-to-one spatial alignment between ViT patch tokens and the LIC latent vectors, which allows token-level task relevance to directly determine which latent vectors are transmitted. Building on this alignment, token-aligned LIC selectively transmits task-relevant latents, layer-selective attention rollout estimates token relevance from a selected range of attention layers in a single forward pass, and surrogate token substitution adapts the frozen server model by optimizing a single learnable token. Experiments on ImageNet show that the proposed framework achieves a more favorable rate--accuracy trade-off than recent semantic communication schemes, hand-crafted codecs, and task-agnostic LIC models.

6G networks will not be serving as communication infrastructures only; rather, they are expected to evolve into intelligent systems, where thousands of autonomous artificial intelligence (AI) agents are interconnected. The agents are deployed across a wide range of platforms including low Earth orbit (LEO) satellites, high-altitude platforms (HAPs), unmanned aerial vehicles (UAVs), edge servers, and terrestrial devices. These agents continuously observe their environment and exchange information. Semantic communication provides an efficient mechanism for exchanging meaningful information instead of raw data. However, its effectiveness depends on the communicating agents having sufficiently aligned beliefs to correctly interpret and decode the transmitted messages. This assumption becomes difficult to satisfy in the 6G network where heterogeneous AI models operate under diverse computational constraints and continuously acquire different knowledge from their local environments. This article presents a heterogeneity-aware belief synchronization framework for 6G AI-native networks. It uses latent translation models deployed on multi-access edge computing (MEC) servers. These models translate belief updates from one agent to agent-specific knowledge without requiring joint training and a homogeneous architecture of models. By exchanging compact belief updates through a latent translation model only when necessary, the framework preserves privacy, reduces synchronization cost, and minimizes local knowledge drift. We validate the framework through a case study on a multi-layered terrestrial/non-terrestrial network. Results demonstrate that it maintains low synchronization cost, measured by the number of parameters transmitted, and low belief alignment error across the heterogeneous agents in the case study.

Autonomous robots increasingly rely on edge computing to offload computationally intensive perception tasks while maintaining real-time operation over 5G networks. However, conventional fiducial marker detection pipelines provide limited opportunities for efficient task partitioning, making them poorly suited for communication-aware edge deployment. This paper proposes a semantic split inference framework for fiducial marker processing in 5G-enabled Edge SLAM. A DeepTag-inspired convolutional neural network is partitioned between the robot and the edge server, where intermediate feature representations serve as task-oriented semantic information transmitted over the wireless link. The framework is integrated into a ROS2-based robotic architecture and characterized over a real 5G communication testbed. Experimental results demonstrate accurate keypoint estimation, illustrate the impact on downstream pose estimation, and quantify the communication--computation trade-offs associated with different split points, providing practical insights for communication-aware deployment of deep visual perception in connected robotic systems.

Video token communication represents video content as discrete tokens that differ in their importance to reconstruction and exhibit temporal dependencies. When these tokens are packetized for wireless transmission, block fading can cause multiple important or correlated tokens to be lost together, severely degrading video reconstruction. To address this issue, we propose a loss-resilient wireless video token communication (WVTC) framework. WVTC evaluates token importance from the intrinsic predictive structure of video tokens, assigning high priority to structural I-tokens and measuring P-token importance by temporal neighborhood novelty. A shuffled mixed I/P-token packetization scheme disperses structural anchors and correlated temporal regions across packets. Using only current block channel state information, an online scheduler jointly considers packet importance density, MCS-dependent decoding reliability, block capacity, and importance concentration when allocating packets to fading blocks. At the receiver, a fine-tuned detokenizer reconstructs missing content from surviving tokens without retransmission. Numerical results demonstrate improved perceptual quality and more graceful degradation under increasing packet error rates.

Modern Earth observation (EO) satellites carry increasingly advanced sensors that produce vast volumes of high-resolution, multispectral data, yet downlink capacity remains a critical bottleneck -- often causing significant latency or the loss of valuable observations within limited contact windows. We propose a "Summarize First, Download Later" paradigm that exploits recent advances in onboard edge computing and Vision-Language Models (VLMs). Rather than indiscriminately downlinking raw imagery, the system follows a three-phase interaction protocol: the satellite first transmits concise natural language summaries generated by a quantized onboard VLM; ground operators then issue targeted Visual Question Answering (VQA) queries to verify scene relevance (e.g., wildfires or maritime anomalies); and full-resolution images are downloaded only when critical information is confirmed. This transforms the downlink from passive bulk transfer into an active, semantics-aware dialogue. We implement and evaluate the system on a resource-constrained NVIDIA Jetson platform, and experiments on diverse remote sensing scenes show that the proposed strategy substantially reduces bandwidth consumption while accelerating time-to-insight for time-sensitive missions.

Collaborative robotics is a representative task-oriented 6G use-case, where communication quality should be reflected in mission execution, environment understanding, and closed-loop operation rather than packet delivery alone. This demo paper presents a robot-edge semantic communication (SemCom) testbed integrating robot-side visual compression, edge-side semantic mapping, and dashboard-based mission interaction. A mobile robot equipped with RGB-D sensing and LiDAR runs ROS 2, while a Jetson Orin edge node performs reconstruction, RTAB-Map mapping, semantic object handling, and browserbased visualization. As an initial proof of concept, RGB frames are encoded on the robot into VQ-VAE tokens using an ONNX Runtime encoder and reconstructed on the edge using a PyTorch decoder. A 320 X 240 image is represented by an 80 X 60 token grid with a packed payload of 5400 bytes, corresponding to a 42.67X reduction relative to model-input RGB bytes. The reconstructed visual stream is further associated with depth, pose, and 3D mapping information to generate a semantic map for downstream robotic applications. The demo exposes the full path from semantic visual transport to object-level map interaction, and provides a practical platform for future task-aware 6G networking studies at the intersection of SemCom, embodied AI, and physical AI-enabled robotics. A video of the demo is available at https://tinyurl.com/Tos09

We propose RSTA, a domain-generalized semantic communication framework enabling source-free V2X collaborative perception under both observation-domain shift and unseen wireless channel conditions. In V2X, received semantic tokens suffer coupled degradation from pre-transmission domain drift and in-transit channel corruption; existing methods address only one source, leaving adaptation misled by tokens that are simultaneously off-domain and physically degraded. RSTA trains a pre-deployment semantic encoder for transmission stability via cross-domain prototype alignment and cross-channel gradient consistency, and updates a lightweight in-deployment decoder adapter through reliability-gated entropy minimization that restricts gradients to tokens ranked high in both semantic relevance and channel fidelity. A theoretical task robustness decomposition links each loss term to a distinct degradation source, grounding each algorithmic component in a measurable error mode. Trained on AWGN and tested on unseen Rayleigh fading, RSTA achieves +7.2 [email protected] over pre-deployment domain generalization on cross-weather tasks and +5.5 on cross-dataset tasks across four V2X benchmarks, updating only 0.21% of parameters in-deployment with zero inter-agent synchronization overhead.

In multiple-input multiple-output (MIMO) semantic communication, imperfect channel state information (CSI) and equalization mismatch can seriously degrade semantic reconstruction quality. To address this issue, we propose a unified restoration flow matching (RFM)-based framework for channel refinement and equalization correction. Specifically, the channel RFM (CRFM) module is developed to refine the coarse channel, thereby improving channel estimation accuracy. Based on the refined channel, the developed semantic RFM (SRFM) module is employed to correct the residual distortions in the post-equalization latent space. The key idea is to formulate the two cascaded inverse problems of channel estimation and equalization as the unified conditional restoration task, in which the learned conditional velocity field guides the perturbed distribution towards the target distribution. To enhance the robustness of these two modules under various distortion conditions, we develop a dual-anchor perturbation training strategy that jointly learns near-manifold refinement and large-error correction, and implement inference through a few-step deterministic ordinary differential equation (ODE) solver. Extensive experiments on MIMO channels and visual semantic transmission tasks demonstrate that the proposed scheme improves key metrics for channel estimation and semantic reconstruction quality. Moreover, compared with representative diffusion-based generative baselines, the proposed method requires fewer sampling steps.

Cooperative multi-task semantic communication (CMT-SemCom) improves task execution performance by leveraging shared representations. However, as we demonstrated in [1], cooperative multi-tasking can be either constructive or destructive, depending on the semantic relationships among tasks. To ensure constructive cooperation, we propose a semantic-aware task clustering method for CMT-SemCom. We have formulated a sequential multi-stage optimization problem in which semantically aligned tasks are clustered once after a short initial training phase, and then end-to-end (E2E) joint training is conducted exclusively within the discovered groups. Specifically, the problem decomposes into two stages: (i) a semantic clustering problem leveraging hierarchical density-based spatial clustering, and (ii) an intra-cluster E2E CMT-SemCom learning problem. Simulation results demonstrate that the proposed framework effectively mitigates destructive cooperation and negative transfer, yielding accuracy gains compared to unclustered multi-tasking and individual training baselines.

Real-time mobile 3D reconstruction is fundamental to many emerging applications such as autonomous navigation and digital twin construction, where a moving platform continuously captures an image stream and transmit to a computing server for scene understanding. Unlike offline reconstruction, camera poses and scene geometry are estimated on-the-fly during acquisition, making multi-view consistency a real-time requirement and rendering geometric estimation highly sensitive to communication-induced distortions. Semantic communication (SemCom) transmits compact semantic information, offering a promising way to preserve task-critical data over unreliable links. However, existing designs are optimized at the image or single-view level and without providing explicit reliability information for geometric estimation, limiting their applicability to real-time mobile 3D reconstruction. In this context, we propose a SemCom framework for real-time mobile 3D reconstruction. The framework includes a semantic transceiver that outputs a reconstructed image alongside a pixel-wise confidence map, quantifying the reliability of each region. We further introduce a confidence-guided geometric estimation method, incorporating confidence into RANSAC-based pose initialization and bundle adjustment to reduce the influence of unreliable regions and enhance robustness under noisy channels. Simulations show that, compared to existing SemCom and traditional seperate source and channel coding, our framework maintains high image quality while significantly improving pose estimation accuracy and 3D structural consistency.

Vehicle coordination at unsignalized intersections relies on accurate real-time vehicle state acquisition and reliable command-and-control (C&C) signal delivery. However, existing studies typically treat sensing, communication, and control separately, which may lead to redundant transmissions, outdated state information, and unreliable vehicle coordination. In this paper, we investigate a new scenario of distributed integrated sensing and communication (ISAC)-enabled vehicle coordination at intersections, where multiple roadside units (RSUs) collaboratively transmit sensing signals for vehicle state acquisition and C&C signals for vehicle movement control under the management of a central base station (BS). To improve signaling efficiency, we propose a unified goal-oriented semantic communication (GSC) framework, which transmits sensing and C&C signals only when they are semantically important for improving intersection traffic throughput. Specifically, an extended Kalman filter (EKF) is adopted to predict vehicle states and fuse distributed sensing measurements. A masked hybrid proximal policy optimization (MHPPO) framework is then developed to jointly determine sensing transmission decisions, C&C transmission decisions, and C&C signal contents based on a value-of-information (VoI) reward. Furthermore, we propose an uncertainty-aware transmission design (UTD), including robust beamforming and VoI-based time-division power allocation, to improve sensing and communication reliability under vehicle state uncertainty and inter-RSU interference. Simulation results show that our proposed framework achieves 100% collision-free vehicle coordination with significantly reduced signaling overhead compared with predictive ISAC baselines adapted from state-of-the-art related studies and several ablation baselines.

The development of smart transportation systems and the introduction of 6G wireless communication technologies have significantly changed vehicle network topologies. Future connected autonomous vehicle (CAV) networks require bandwidth-efficient, reliable, and low-latency communication for safety-critical applications such as traffic sign recognition and decision-making. Conventional communication systems transmit raw data regardless of task relevance, which is inefficient in resource-constrained satellite channels where uplink bandwidth is scarce and propagation losses are large. Semantic communication addresses this limitation by transmitting task-relevant information instead of full signal representations. It extracts and conveys essential semantic features and leverages deep learning to optimize task performance at the receiver. Therefore, we present a Variational Autoencoder (VAE)-based multi-task semantic communication framework for satellite-assisted autonomous driving. Unlike deterministic autoencoder-based methods, the proposed model uses probabilistic latent representations for more robust and efficient encoding. The learned features are transmitted over noisy wireless channels to perform traffic sign reconstruction and classification. The framework is trained end-to-end to jointly optimize both tasks. Results show that the proposed approach achieves significant bandwidth reduction of up to 87.23% to 98.17% while maintaining stable performance across varying signal-to-noise ratio conditions.

The groundbreaking development of generative artificial intelligence (AI) is rapidly boosting the ability to generate content such as images and videos, reshaping communication paradigms. This article introduces generative communications (GenCom), a novel paradigm for 6G networks in which large AI models (LAMs) drive semantic understanding, reasoning, and content generation, embedding these into the communication process. Unlike traditional systems that strictly pursue accurate bit transmission, GenCom enables transmitters to convey only minimal yet sufficient information, while receivers leverage shared generative priors and knowledge bases to synthesize the intended output. Communication is thus redefined as controlled generation rather than data reproduction. We formalize the concept of GenCom, clarify its AI-native and generation-driven properties, and present its core mechanisms. A two-layer GenCom architecture supported by key enabling technologies is proposed, and analysis of four representative application scenarios demonstrates that GenCom offers ultra-efficient transmission, semantic-level robustness, and new network functions. Finally, we outline future research directions, including foundational theory and real-time processing, highlighting a promising pathway toward 6G networks.

Communication systems designed for reliable data reconstruction, rather than task-oriented communication, typically rely on separate source and channel coding and incur high latency under limited spectrum availability and fading channels. To address this, we propose a transmission framework with opportunistic spectrum access, in which the transmitter sends discrete latent representations learned via a vector-quantized variational autoencoder (VQ-VAE) over idle licensed channels using standard digital modulation. The AI-powered receiver is still able to reconstruct task-related information from the heavily compressed data. We develop a cross-layer latency model that accounts for compression, block errors, retransmissions, and stochastic channel access. Results on latency-accuracy trade-offs show that the proposed scheme achieves at least 79- and 3.3-fold latency reductions with only 5.7% and 2.4% drops in classification accuracy compared to benchmarks using conventional source and channel coding. The framework enables low-latency communication and reliable task execution even under limited spectrum availability and challenging channel conditions.

Semantic communication (SemCom) has emerged as a promising paradigm in which the transmission of task-relevant information is prioritized over raw data, enabling efficient and robust communication under resource and channel constraints. In this paper, the privacy implications of relay-assisted SemCom systems are studied, where the intermediate relay node operates directly on learned latent representations. It is shown that the relay, even without access to source data, can reliably infer semantic meaning and reconstruct signals with performance comparable to that of the legitimate receiver, revealing a fundamental privacy vulnerability of semantic representations. To address this issue, an iterative adversarial training framework is proposed in which a strong, adaptively trained eavesdropper at the relay is explicitly accounted for. The proposed approach alternates between optimizing the relay's eavesdropping function and the legitimate system, resulting in representations that preserve semantic decoding performance at the intended receiver while degrading semantic inference at the relay. The semantic accuracy gap between the legitimate receiver and the eavesdropper is significantly enlarged across channel conditions. Importantly, this protection is achieved in a stealthy manner, with high reconstruction fidelity maintained while semantic leakage is selectively suppressed.

Emerging uplink-dominant 6G use cases, such as cooperative vehicular streaming, require efficient transmission of high-volume visual data over limited wireless resources. While semantic communications can reduce traffic by prioritizing task-relevant content, most existing approaches treat users independently and therefore overlook spatial redundancy among nearby devices' observations. This paper proposes a semantic-aware multiple access scheme that exploits overlapping fields of view among vehicular users to reduce redundant uplink transmissions. We formulate a joint perception and transmission control problem in which users decide which image patches to transmit, when to transmit them, and over which channel, subject to communication constraints. To address the resulting complexity, we introduce a practical two-phase approach. First, nearby vehicles share selected observation patches over Vehicle-to-Vehicle (V2V) links to calculate inter-user spatial redundancy. Second, users transmit only semantically important, non-redundant patches to the base station, where observations can be reconstructed using the received patches and complementary views from neighboring vehicles. Simulation results in a dense urban vehicular scenario demonstrate that our approach improves the proportion of users who achieve high-fidelity reconstruction, highlighting the potential of semantic-aware multiple access for sustainable and resource-efficient 6G uplink systems.

The emerging techniques of semantic communications and edge computing in 6G networks necessitate a paradigm shift toward co-designed semantic-aware and adaptive resource allocation for short-packet transmissions. However, there is a fundamental gap between the semantic layer and the physical layer under low-latency finite blocklength (FBL) effects. To bridge this gap, we introduce the Quantized Semantic Age of Information (QSAoI), a novel metric that rigorously captures the trade-offs among freshness and semantic efficiency of high-level features in real-time communication in the FBL regime. Guided by this metric, we propose a novel foundation model-based efficient co-designed framework to minimize the expected QSAoI over wireless fading channels in latency-constrained semantic communication. Specifically, we formulate a non-linear joint optimization problem to dynamically optimize the block-wise mixed-precision quantization (MPQ) strategy and the physical blocklength. To efficiently resolve this complex problem, we develop a high-efficiency low-complexity algorithm based on fixpoint inspection and bisection search. Extensive simulations validate that our proposed algorithm dynamically adapts the semantic quantization precision to varying channel conditions, effectively minimizing the expected QSAoI compared to baselines.

Semantic communication (SemCom) aims to preserve semantic meaning and task-oriented information beyond conventional message recovery over wireless channels. The adoption of SemCom in shared-access wireless networks introduces new vulnerabilities for multi-user semantic inference. This paper considers a SemCom system for two transmitters communicating with a common receiver over a multiple access channel. Each transmitter maps source information into latent semantic representations, while the receiver jointly reconstructs and classifies the semantic information for both transmitters. A selective over-the-air backdoor (Trojan) attack is presented in which an adversary transmits a low-power trigger waveform over the air and injects it into the shared received signal during training. By transmitting the trigger again during testing, this stealthy, low-power attack selectively manipulates the semantic inference for one transmitter while minimally affecting the inference of the other transmitter. To mitigate this vulnerability, a trigger-aware defense mechanism is developed to preserve correct semantic labels under trigger-contaminated wireless observations. The results demonstrate both the vulnerability of shared-access SemCom systems to selective over-the-air backdoor attacks and the effectiveness of trigger-aware robust training for semantic protection.

Quantifying how meaning propagates through communicative exchanges remains underdeveloped in computational linguistics. Here we introduce an information-theoretic framework that quantifies the directed flow of semantic content between interlocutors and decomposes multi-source contributions into redundant, unique, and synergistic components. Our approach leverages large language models as probabilistic estimators of natural language to compute two measures: semantic transfer entropy (STE), which captures directed predictive influence between speakers, and semantic partial information decomposition (SPID), which resolves how multiple sources jointly shape a target's language. Across four experiments we show that the framework detects reduced information flow in cognitively rigid dialogue, captures the dominant role of persuaders in shaping discourse, distinguishes high- from low-quality psychotherapy by the directionality of therapist-client information exchange, and reveals synergistic premise contributions in argumentative essays. This framework opens new avenues for studying information dynamics in digital discourse, pedagogical interactions, clinical dialogues, and any domain in which the structure of linguistic exchange is of research relevance.