Visuo-Tactile Representation Learning

Tactile feedback provides embodied agents with physical information beyond visual observations, enabling more reliable interaction with the real world. However, despite the rapid progress of vision-tactile-language-action (VTLA) policies, there remains a lack of unified benchmarks for evaluating tactile-enabled robot manipulation across simulation and the real world. To address this gap, we introduce OpenViTac, a visuo-tactile manipulation benchmark for evaluating robot policies across simulation and the real world. OpenViTac organizes contact-rich manipulation into four tactile-relevant capability dimensions and provides paired simulation-real-world settings for consistent evaluation of VLA, WAM, and VTLA policies. Building upon this benchmark, we investigate how different tactile representations and integration strategies affect the performance of pretrained VLA models. Correspondingly, we introduce OpenVTLA, a tactile augmentation framework that combines the best-performing representation and integration strategy. Furthermore, we leverage the paired benchmark setting to study sim-real co-training and analyze factors affecting cross-domain policy learning. Together, OpenViTac provides a unified platform for evaluating and advancing visuo-tactile robot manipulation.

Large-scale egocentric human interaction data is becoming an important source of physical supervision for embodied learning, yet video alone leaves the contact and pressure that characterize physical interaction unrecorded. Recent visual-tactile datasets provide this missing supervision, but their synchronized tactile data remain far smaller in volume than human video. Moreover, the largest resources often merge recordings from different sensors or annotation procedures, which makes the effect of data scale difficult to isolate. We therefore introduce TouchScale, a 500-hour dataset of contact-rich human interaction recorded with a single unified wearable setup. Its approximately 2K predefined task descriptions span everyday activities and structured manipulation, and each recording temporally aligns egocentric RGB-D video with wrist RGB video and dense full-hand bimanual tactile measurements. Compared with prior tactile data, training on the full TouchScale raises zero-shot contact IoU on data from an unseen tactile sensor from 0.134 to 0.383. Pretraining a visual encoder on TouchScale also yields the highest action recognition accuracy on three benchmarks among the compared visual-tactile datasets. Used for visual-tactile mid-training of a robot policy, TouchScale improves the average real-world success rate across four contact-rich manipulation tasks from 22.5% to 57.5%. With the sensor and collection protocol held fixed, both zero-shot tactile prediction and robot success show an overall upward trend as more TouchScale data is used. These results suggest that human visual-tactile data collected at scale with consistent sensing benefits both perception and robot manipulation. We will publicly release TouchScale, including all synchronized visual-tactile recordings and reconstructed object models, to support future research on scalable visual-tactile learning.

World action models improve robotic manipulation by conditioning actions on predicted futures, yet existing tactile variants largely inherit video-generation pipelines that reconstruct future tactile observations through iterative denoising. Such prediction can become unreliable under deployment drift: small changes in contact position or force may substantially alter tactile pixels even when the underlying contact evolution remains predictable. We introduce TacDyn-WAM, a heterogeneous visuo-tactile world action model that predicts implicit tactile dynamics rather than reconstructing future tactile observations. It learns TacRep, a dynamics-aware tactile target space trained through masked spatio-temporal prediction on tactile clips and regularized by relational structure distillation. A visual expert and an Implicit Tactile Dynamics Expert predict future visual and tactile representations in separate target spaces while interacting through joint attention; the tactile expert predicts future representations and their changes at multiple horizons in a single forward pass, and a read-only tactile memory supplies the current tactile state. On UniVTAC, TacDyn-WAM achieves an average success rate of 81.5% using only the provided demonstrations, reaching state-of-the-art-level performance and remaining competitive with models pretrained on large-scale visuo-tactile trajectories. Ablations confirm the benefits of both tactile pathways and TacRep over pixel-reconstruction and static alternatives. On five real-robot tasks, TacDyn-WAM reaches 71.0% average success, and modest-scale pretraining raises it to 85.0%, further validating our method.

Reliable dexterous manipulation requires continuous estimation of object geometry and hand-object contact throughout interaction. With egocentric sensing, however, the manipulating hand frequently occludes task-relevant object surfaces and contact regions, reducing the visual evidence available for state estimation and thereby making robust closed-loop control and generalization to unseen object geometries particularly challenging. To address this, we present OccluDex, a hierarchical 3D visuo-tactile representation learning framework that integrates global geometric structure with local contact information for robust manipulation under dynamic self-occlusion during hand-object interaction. OccluDex adopts multi-scale masked autoencoding to progressively encode partial 3D geometry and fuses tactile contact tokens with high-level geometric features through cross-modal attention. The encoder is pretrained from synchronized human visuo-tactile demonstrations and transferred as a frozen perceptual backbone for downstream reinforcement learning. We evaluate OccluDex on a faucet rotation task, requiring one full clockwise handle revolution, and a tabletop object reorientation task, requiring a 180-degree tabletop object reorientation without toppling. In simulation experiments, OccluDex demonstrated 12.6% higher accuracy for unseen objects and 8.3% higher accuracy for previously seen objects than the strongest state-of-the-art baseline models. Physical experiments were further performed with a Shadow Hand to demonstrate successful zero-shot sim-to-real generalization on unseen physical objects. This results could enable humanoid egocentric object manipulation for seen and unseen objects even when the manipulating robotic hand occludes vision.

Robotic manipulation integrates vision, touch, and language, whose importance shifts across stages: vision guides reaching, while touch, through its evolution over time, decides grasping, alignment, and contact. Yet existing multi-modal manipulation policies typically use fixed temporal contexts and fusion strategies, despite shifts in what each modality contributes across different skills. We study how vision and touch should be combined at the level of primitive skills, asking what each skill needs from each sensor, and propose a skill-conditioned representation in which the queried skill conditions fusion over modality-specific short-term observation tokens while attending to a sparse event memory that retains terminal observations from the last $K$ executed skills. Evaluated by skill progress estimation on three contact-rich tasks, it reduces slip-detection delay by 87% against fine-tuned SOTA progress models, twist-completion delay by 67.5% against a vision-only ablation, and progress error on a blind search task by 92% through sparse event memory. Gains concentrate exactly where completion is defined by contact or task history. More broadly, our results suggest that observation formation not only policy architecture is a central challenge in multi-modal representation. Project Website: http://what-to-attend-what-to-keep.github.io/

Physical contact often determines how a humanoid should respond during loco-manipulation, yet vision and proprioception alone are often insufficient to characterize physical interaction, especially when the contact region is occluded. Unlike sparse force or torque measurements at predefined regions, distributed tactile sensing preserves spatially resolved contact patterns across the robot body. We therefore study how to integrate such whole-body tactile information into vision-language-action (VLA) policies for contact-rich control. Our approach, Uni-VLaT, introduces a tactile pathway whose latent state is trained not only for action generation, but also to predict future tactile, proprioceptive, and visual representations. This predictive objective builds a tactile-anchored multimodal context, encouraging a more structured understanding of the physical world. We evaluate Uni-VLaT on five real-robot tasks covering tactile-triggered locomotion, sustained physical interaction, human-robot contact, and loco-manipulation. Uni-VLaT achieves a 75% average success rate, outperforming a baseline without tactile input by 43 points and a tactile-input baseline without predictive supervision by 7 points. Across two pretrained VLA backbones, our method improves Table Sweeping by 30 points on both backbones and Back-Tap Walking by 85-90 points. Ablations further show that contextualized tactile prediction and absolute future targets are critical to performance. These results indicate that predictive tactile learning provides an effective route for extending pretrained VLA policies to whole-body physical interaction.

Dexterous manipulation requires tactile feedback. However, robot tactile demonstrations are difficult to scale,because dexterous-hand teleoperation provides limited tactile feedback to the operator. In contrast, human demonstrations offer a substantially more scalable source of diverse tactile interactions. Motivated by a simple premise: hands can change, but the underlying physics of interaction does not. We leverage human tactile data to improve dexterous manipulation policies. Specifically, we first build a tactile motion-capture system that synchronously records images, tactile signals, and hand motions. Using this system, we construct the UVTA dataset spanning five contact-rich tasks, with 1,000 human demonstrations covering diverse interaction patterns and 150 robot demonstrations per task. To transfer the underlying physics of human interaction to robot control, we propose a Unified Visual-Tactile-Action Model that maps both embodiments into aligned tactile and action representations and jointly predicts future action and tactile trajectories. The joint objective enables human demonstrations to supervise contact-aware representation learning, while only robot actions are executed during deployment. In real-robot evaluations across five tasks, our method achieves an average success rate of 70%, outperforming the strongest visual-tactile baseline, which achieves 29%, and an architecture ablation, which achieves 42%. Performance improves consistently with additional human demonstrations and exhibits no saturation at 1,000 demonstrations per task, validating the effectiveness of scalable human tactile data for dexterous manipulation. Project page is available at https://uni-vta.github.io/.

Cable routing requires coordinated control of global cable topology and changing local contacts. We present CableVLA, an end-to-end multimodal vision-language-action framework that converts simulation-privileged supervision into deployable cable-topology and tactile representations. TopoHead distills node-level physics and current and future cable-topology information into causal visual context for the action expert. TacSense uses complementary frame and taxel branches to learn contact dynamics from resistive arrays, with simulator-derived kinematics and contact events providing supervision beyond the measured force map. A contact gate activates force-tactile residuals that refine the next 8 arm-and-gripper actions of a frozen topology-conditioned policy. Across 345 MuJoCo evaluations, CableVLA improves success from 62.6% for the $π_{0.5}$-V visual baseline to 84.9%. TacSense achieves pronounced gains in slip-transition recognition over a CNN-LSTM baseline with a similar parameter count, and this advantage persists under frozen-encoder probes. Topology prediction and 57-task tactile evaluations assess representation quality, while policy adaptation studies evaluate downstream control performance. Cross-simulator and real-robot comparisons further examine zero-shot policy transfer under changes in dynamics and sensing.

Dexterous manipulation depends on contact dynamics that are often only partially observable from vision. Recent World-Action Models (WAMs) couple predictive video world modeling with action generation, but remain largely vision-centric and therefore cannot directly model these contact dynamics. We present DexTacWAM, a visuo-tactile WAM that encodes each fingertip independently, aggregates the resulting features through a finger- and pose-aware tactile compressor, and injects the tactile latent into a video diffusion world model for joint visuo-tactile world modeling. Across six contact-rich dexterous manipulation tasks on a 22-DoF bimanual platform, DexTacWAM achieves the highest score on every task, averaging 70.6 versus 38.0 for the strongest baseline. Ablations attribute the gain to modeling contact evolution as part of the predicted world state rather than tactile conditioning alone: removing tactile world modeling reduces the four-task mean from 74.7 to 26.6 while keeping the same tactile features and action expert. After four hours of tactile-encoder adaptation with a frozen pretrained vision VAE, our continual vision-to-touch learning extends the pretrained video model to touch using roughly 100 demonstrations per task without tactile midtraining, while retaining visual prediction quality within 0.5 dB of vision-only counterparts. The compressor retains 89.4% of pre-fusion contact recall while enabling 2.26x faster training and 1.29x faster inference. Together, these results show that pretrained video priors can be extended to distributed multi-finger contact dynamics in a data- and compute-efficient manner.

Contact-rich manipulation requires estimating forces, slip and contact geometry that can remain ambiguous in scene images. Optical tactile sensors provide both visual observations of the contact surface and mechanical measurements, yet learning from these signals raises two challenges: representing contact beyond appearance and transferring its benefits to a policy that does not require fingertip observations at deployment. We introduce HapticWAM, a world-action model that combines heterogeneous tactile encoding, structured contact prediction and teacher-student distillation. Its teacher encodes gel images together with deformation, shear, distributed forces, resultant wrench and derived contact state into a frozen video backbone. Rather than predicting tactile pixels alone, the model jointly generates actions and a contact package describing future events and mechanics. Anticipatory Contact Coupling uses the previously imagined package to condition attention, preserving a contact-related input when direct tactile observations are unavailable. Haptic-Imagination Distillation transfers both contact futures and action predictions to a student that retains the generative contact head but removes its fingertip input branches. On a real-world setup, across three contact-rich pick-and-place tasks, HapticWAM Student achieves a 77% per-task mean success rate (41 of 50 starts, 82% pooled), reaching 95% on one of the tasks, outperforming the evaluated teacher and baseline configurations.

World Action Models bring the predictive capabilities of video models into robot action generation, providing a rich foundation for modeling future visual states. Tactile sensing complements this foundation with direct measurements of physical interaction. Some existing methods use tactile features as conditioning inputs without jointly predicting future tactile states, visual observations, and actions. Our key insight is that tactile signals, like video, provide observations of the evolving world state and should be modeled as future observations alongside video. We present ME-Dex-1.0 (MachEmbodied-Dex-1.0), a unified World Action Tactile Model for joint visual, tactile, and action learning. ME-Dex-1.0 adopts a Mixture-of-Transformers architecture comprising a Video Expert, a Tactile Expert, and an Action Expert, all trained with flow matching. We use shared attention connects the experts in intermediate layers, allowing action generation to draw on learned representations of visual and tactile dynamics during joint denoising. To support multi-source heterogeneous tactile inputs, a Canonical Hand Model and a Unified Tactile Autoencoder map tactile observations from different embodiments and sensing layouts into shared spatial and latent spaces. To address the limited availability of paired visual, tactile, and action data, we develop the Agentic Tactile Data Engine, an agent-based data production platform. It supplements RoboTwin and DexJoCo with tactile data recorded directly from force sensors during trajectory replay in simulation. Experiments on the RoboTwin, DexJoCo, and ManiFeel simulation platforms, together with real robot evaluations, demonstrate improved manipulation performance using both grippers and dexterous hands equipped with tactile sensing.

World Action Models (WAMs) advance beyond conventional visuomotor policies by jointly predicting future world states and robot actions, enabling the policy to learn physical dynamics that support effective control. However, recent tactile WAMs often rely on large-scale pretrained generative backbones to capture contact-rich physical dynamics, which limit their inference efficiency and flexible deployment. In this paper, we present \ABBR{}, an agile tactile World Action Model for contact-rich robot control. \ABBR{} encodes visual and tactile observations into a shared latent that serves as the source of a direct vision-tactile-to-action flow-matching process, which can jointly generate latent representations of action chunks and future visual/tactile latents. A key observation is that vision and tactile signals evolve at inherently different timescales: adjacent visual frames are often highly similar, whereas tactile signals can change abruptly upon contact. We therefore introduce multi-horizon multimodal prediction in \ABBR{}, which provides supervision for visual latent at a larger temporal offset while predicting the tactile latent in the next frame to capture fine-grained contact dynamics. Across nine simulated and five real-world contact-rich manipulation tasks, \ABBR{} demonstrates strong and robust performance, outperforming the strongest baseline in success rate while maintaining low inference latency. In particular, in five real-world experiments, \ABBR{} yields a relative gain of $\textbf{29.4\%}$ in overall success rates while achieving inference latency of $\textbf{11.9 ms}$. These results demonstrate that multimodal WAM can be achieved with an agile architecture suitable for precise and high-frequency robot control. More details are available on our project page: https://hanchuzhou.github.io/TARO_project_page/.

Dexterous manipulation requires coordinated multi-finger control and effective tactile feedback, yet learning these capabilities remains challenging due to the lack of large-scale real-world data and the difficulty of extracting effective representations from sparse tactile signals. We build a robot platform and teleoperation system to collect a 200-hour bimanual dexterous manipulation dataset with synchronized visual, tactile, and language annotations, comprising 10,576 trajectories across 65 tasks, 69.5% of which involve dexterous multi-finger manipulation. We further propose STAR, an integrated training recipe for vision-tactile-language-action (VTLA) models that addresses the spatial, temporal, and informational sparsity of tactile signals through visual-tactile joint pre-training, sparse-global tactile token representation, and sparse future tactile prediction. Trained on this dataset, STAR achieves a 61% average success rate across four real-world tasks with 100 post-training trajectories per task, demonstrating dexterous performance under task-specific post-training.

Dexterous manipulation involves contact-rich and fine-grained interactions with the physical world, posing significant challenges for existing vision-language-action (VLA) models due to severe visual occlusions and complex contact dynamics. While recent works have incorporated tactile sensing into robotic manipulation, most approaches still rely on homogeneous multimodal fusion, lacking adaptive tactile integration and explicit modeling of physical dynamics. In this work, we present DeCAL, a physically-grounded dexterous vision-language-action model that unifies understanding, imagination and action generation for contact-rich dexterous manipulation. Built upon a Mixture-of-Transformers (MoT) architecture, DeCAL leverages specialized experts for each capability while enabling efficient information flow among them. To effectively leverage tactile information, we introduce Adaptive Visuo-Tactile Fusion that dynamically regulates tactile interactions via a contact-aware gating strategy. Furthermore, we propose Visuo-Tactile Latent Co-Imagination to jointly model visual and tactile dynamics, equipping the policy with implicit physical world knowledge. Experimental results show that DeCAL consistently achieves state-of-the-art performance across all tasks, attaining a 71% average success rate and an 83.4% progress success rate, while also demonstrating strong generalization to unseen scenarios. The website is available at https://aureleopku.github.io/DeCAL.

We present $N_0$-Foundation, a paradigm for tactile-enabled embodied manipulation, which integrates tactile sensing hardware, large-scale multimodal data, tactile representation learning, and standardized evaluation. First, we engineer the infrastructure for scalable data collection, including a vision-based tactile sensor, a tactile Universal Manipulation Interface (UMI), and a synchronized visuo-tactile data collection system supporting both robot embodiments and UMI-based demonstrations. Leveraging this infrastructure, we construct NeoData, which contains more than 30000 hours of synchronized visual and tactile demonstrations, spanning six embodiments, 450 tasks, and billions of paired RGB and tactile frames collected through a mixture of real-robot teleoperation and UMI-based demonstrations. To facilitate open research, we further release OpenNeoData, a 5000-hour open-source subset of NeoData. The dataset addresses a central limitation of existing manipulation corpora, critical for deformable-object manipulation, precise assembly, delicate force control, and sustained surface interaction. Capitalizing on the large-scale, heterogeneous tactile measurements, we propose NeoForce, a visuo-tactile representation model that learn transferable tactile representations across different sensor designs. To enable systematic evaluation of tactile embodied models built upon our infrastructure, datasets and tactile representations, we further propose a comprehensive benchmark, which combines the real-world NeoReal suite and the simulated NeoSim suite for standardized evaluation. Experiments across both suites show that policies benefit from the physical contact state rather than from the device-specific appearance of the tactile signal. We release the dataset, the representation, and the benchmark, aiming at supporting future work on tactile-enabled embodied manipulation.

We propose VT-MUSE, a Multimodal Unified SEquential representation learning framework for visuotactilemanipulation. Existing approaches often encode visual and tactile observations independently before fusion, limiting their ability to capture fine-grained cross-modal dependencies. Moreover, most methods focus on observations at the current time step and overlook the temporal evolution of contact. VT-MUSE addresses both limitations through a two-stage representation learning framework. In Stage I, modality specific encoders are jointly adapted via cross-modal temporal alignment and masked-view consistency. In Stage II, a conditional variational latent model processes masked visual sequences together with full tactile histories. Auxiliary decoders reconstruct the masked recent visual observations and predict tactile depth changes, encouraging the latent representation to retain both global visual context and local contact dynamics. The learned representation is subsequently integrated into a lightweight Transformer policy through gated cross-attention. On the simulation benchmark, VT-MUSE outperforms the strongest baseline evaluated on all tasks by 11 percentage points and also achieves substantial improvements in real-world experiments.

Humans achieve stable and adaptive grasps by seamlessly integrating visual perception and tactile feedback, a capability that remains challenging to replicate in robotic systems. Existing robotic grasping approaches predominantly rely on visual inputs and lack mechanisms for tactile-guided adaptation after contact, limiting robustness and generalization. To address this challenge, we propose a unified visuo-tactile-fusion grasping framework that integrates grasp generation, feasibility prediction, and adaptive refinement. At its core, our method introduces an efficient visuo-tactile representation that tightly fuses object geometry with tactile feedback by associating tactile signals with finger identities. This unified representation supports contact-aware grasp pose generation during planning and tactile-guided refinement after contact, enabling the system to reason about fine-grained finger-object interactions and adjust grasps dynamically. Comprehensive experiments in both simulation and real-world environments demonstrate that our approach significantly enhances grasp success rates and generalization across diverse objects.

In contact-rich manipulation, visual observations primarily guide motion in free space, whereas tactile observations become particularly informative during contact. However, standard Transformer-based visuo-tactile policies typically rely on either token concatenation or learnable gating. These approaches lack explicit contact-aware priors, making it difficult to efficiently learn effective cross-modal representations from demonstrations. To address this limitation, we propose CAAT, a lightweight contact-aware framework that explicitly incorporates contact priors through attention scaling and dynamic tactile masking. Specifically, CAAT emphasizes visual information before contact and tactile information during contact. It also suppresses static background tokens by comparing the current tactile observation with a non-contact reference. CAAT can be integrated into commonly used Transformer-based policies without modifying their action decoders. In simulation, integrating CAAT with ACT improves the average success rate by 18.0 percentage points over direct visuo-tactile fusion and by 10.0 percentage points over gated fusion. In real-world experiments using a visuo-tactile UMI platform, CAAT achieves an average success rate of 60.0% across ACT, Diffusion Policy, and $π_0$, outperforming the strongest baseline by an average of 21.1 percentage points. These results demonstrate that explicit contact priors and dynamic tactile masking are effective in improving visuo-tactile policy learning and task performance of diverse policy architectures. https://mrjiangjm.github.io/caat/

World Action Models (WAMs) combine future-state prediction with robot action generation, but existing approaches largely rely on visual futures. Visual prediction captures scene structure and object motion, yet provides limited supervision for force, deformation, shear, and slip during contact-rich manipulation. This creates two design requirements: tactile futures should carry meaningful physical information, and they should not become privileged cues for action generation. We present TacWAM, a mechanics-aware tactile WAM that addresses this challenge in three steps. First, a Spatially Aligned Fusion (SAF) Tactile Encoder maps tactile appearance, dense force fields, and deformation flow into a shared latent prediction space, with bilateral force and torque reconstruction preserving global contact information. Second, a tactile history encoder provides temporal context so future tactile prediction reflects how force and deformation change beyond the current tactile observation. Third, Anchor-Guided Tri-Modal (AGT) Attention separates current visual and tactile anchors, future prediction tokens, and action tokens, allowing future tactile states to supervise training without being directly read by the action branch. We evaluate TacWAM on four real-world contact-rich manipulation tasks covering fragile grasping, sustained surface contact, and dynamic in-hand manipulation. TacWAM achieves an average success rate of 75.0%, exceeding the strongest evaluated baseline by 37.5 percentage points. Staged ablations show consistent degradation when tactile history is removed and access to future prediction targets is relaxed. These results indicate that future tactile supervision can improve contact-aware action learning when combined with informative tactile representations and deployment-consistent information constraints.

Incorporating tactile sensing into Vision-Language-Action (VLA) models holds promise for contact-rich manipulation, where visual observations alone often fail to capture critical cues about physical interactions. However, learning informative tactile representation while effectively adapting it to pretrained VLA models remains challenging under limited task-specific data. Existing methods either focus on instantaneous contact states or model temporal interaction dynamics using 6D wrench sequences, leaving high-dimensional tactile signals underexplored. To address these challenges, we present τ, a touch-augmented VLA framework that learns an action-conditioned spatiotemporal tactile representation from future visual supervision inspired by the Joint-Embedding Predictive Architecture (JEPA), and fuses it with vision-language features for action generation. This supervision operates in latent space and is used only during training, adding no deployment overhead. We also introduce TacAura, a dataset of synchronized vision, proprioception, and vision-based tactile signals across four representative contact-rich manipulation tasks. Experiments show that τ outperforms existing models and generalizes to unseen objects and scenes, delivering improved manipulation performance and robustness. Project Page: https://cocacola-lab.github.io/tau-Page/.

We present $N_0$-TWAM, a tactile-native world-action model for contact-rich manipulation that predicts both future vision and future contact. To our knowledge, it is the first tactile world-action model trained at large scale, and it shows strong capability on contact-rich tasks. We pre-train $N_0$-TWAM at large scale with visuo-tactile joint training over tactile-rich demonstrations spanning six embodiments and 450 tasks. We use NeoForce, a unified force-based tactile representation, to form a physically grounded contact signal that conditions action generation. To improve long-horizon and multi-stage manipulation, we introduce tactile contact events for task staging and advance through them during execution. For real-time efficiency, we adopt an asymmetric Mixture-of-Transformers architecture that pairs a full-width expert for video prediction with slim experts for downstream action and tactile prediction. Evaluations on both real and simulated benchmarks justify the capabilities of $N_0$-TWAM across a range of contact-rich tasks, and demonstrate the benefit of data scaling for precise tactile and action prediction. In summary, $N_0$-TWAM endows a world-action model with predictive capabilities to foresee vision, touch and action, building a solid foundation for fine-grained manipulation on open contact-rich tasks. The codebase and model checkpoints will be made publicly available to foster further research and development in tactile-enabled robotic manipulation.

We present $N_0$-VTLA, a vision-tactile-language-action (VTLA) foundation model capable of (1) fine-grained contact-rich manipulation with tactile perception and tactile-feedback control, and (2) offline policy improvement from stored deployment data. Building on current vision-based backbones, we propose a training recipe for tactile integration consisting of visuo-tactile pre-training, staged tactile-pathway integration, and advantage-conditioned offline policy improvement. During pre-training, the policy learns broad contact priors from NeoData, our large-scale visuo-tactile robot dataset; to our knowledge, $N_0$-VTLA is the first VTLA model pretrained on tactile data at scale. During post-training, we augment the policy with a predictive tactile pathway that distills the contact patterns learned at scale into the fine motion adjustments required by downstream tactile-centric manipulation. For offline policy improvement, we introduce ALTER, an advantage-conditioned offline reinforcement learning method that converts relative progress and trajectory-event comparisons into binary advantage labels for policy training on a fixed deployment corpus, further improving task-specific learning on contact-rich skills such as deformable object manipulation. Across contact-rich benchmarks, $N_0$-VTLA outperforms strong baselines by wide margins: it wins all nine real-robot NeoReal tasks and reaches 63.8% mean success on a twenty-task simulation suite, against 44.0% for the strongest baseline. $N_0$-VTLA policies trained with ALTER reach 75-95% success on three long-horizon real-robot tasks. These results lay a foundation for versatile tactile-driven manipulation policies.

The sense of touch is central to manipulation, especially when vision is occluded or ambiguous. Although combining vision and touch improves manipulation, learning robust visuo-tactile policies requires substantial tactile data. Such data remains scarcer than visual data, because tactile sensors are fragile, specialized, and hard to standardize. To address this, we present Feature-Extracted Latent Tactile (FELT), a learning-based framework that synthesizes per-finger pressure tactile images from RGB observations, reducing the need for tactile-equipped data collection. FELT uses a large frozen visual encoder and a lightweight query decoder to predict tactile signals in a single feed-forward pass. To respect the physical topology of dual-finger tactile sensors, FELT decodes the left and right tactile sensor panels through separate branches, capturing the asymmetric contact patterns during interactions such as wiping, insertion, and in-hand rotation. At inference time, FELT only requires RGB data, allowing us to augment existing vision-only data with tactile observations, either as generated tactile images or as latent tactile features. Experiments on four contact-rich manipulation tasks demonstrate that both generated tactile images and latent tactile features improve policy success over vision-only baselines, with latent feature requiring no real tactile sensor during policy training or deployment. Supplementary material is available on our anonymous website: https://felt-tactile.github.io/.

Vision and touch are complementary modalities essential for robotic perception and manipulation. While vision provides global object context, touch offers precise local information at contact points. Integrating these modalities for contact localization, i.e., predicting the location of touch on an object's surface, poses significant challenges due to the need for accurate spatial alignment between tactile data and visual geometry. To address this challenge, we propose VTLoc, a novel visual-tactile framework that localizes contact points from tactile readings using a 3D point cloud as visual input. VTLoc introduces two key components: a geometric multi-modal alignment module, which reconstructs a pseudo-point cloud from fused visual-tactile features and aligns it with the visual point cloud to enforce spatial consistencies across modalities; and an iterative localizing updater, which iteratively refines the predicted contact location using fused visual-tactile features. Evaluated on a new benchmark of 100 real-world objects, VTLoc improves single-touch contact localization by reducing local-to-global correspondence ambiguity.

Tactile-enhanced vision-language-action (VLA) policies have been introduced for contact-rich manipulation, where critical interaction states are often hidden from vision. Future tactile prediction is a promising way to use touch because it turns tactile outcomes into supervision for action-induced contact dynamics. Yet VLA policies contain representations with different roles, from perceptual encoding to motor prediction, making it unclear where this supervision should be applied. We study this as a representation-alignment problem. Through a linear probe analysis, we find that future tactile states are most predictable from intermediate action-expert features, rather than from vision-language features or final action states. Motivated by this observation, we introduce a lightweight Latent Tactile Predictor (LTP), which predicts compact future tactile embeddings from the identified intermediate representation. By avoiding direct prediction of noisy raw tactile signals, LTP provides an action-outcome grounding signal that aligns intermediate action representations with future contact consequences. Experiments on real-world contact-rich manipulation tasks show that representation-aligned tactile grounding outperforms less aligned or multi-interface tactile prediction, highlighting the importance of where tactile supervision is applied.

Tactile perception is indispensable for contact-rich manipulation, yet integrating it into Vision-Language-Action (VLA) models often induces modality collapse, where high-bandwidth visual features overshadow sparse tactile cues. Inspired by Predictive Coding, a neural mechanism where the brain attenuates predictable inputs to prioritize surprising stimuli, we propose ResTacVLA. Rather than treating tactile data as raw input, we reformulate it as a Residual Tactile Representation capturing the discrepancy between visual priors and physical sensations. By filtering out visually predictable dynamics, this formulation transforms sparse tactile signals into dense, high-value information gain, thereby inherently resolving the bandwidth mismatch. These residuals are discretized through a Vector Quantized (VQ) bottleneck into Latent Contact Primitives that capture critical events missed by vision. Analogous to the neural surprise signal, we leverage the uncertainty of the visual prior to adaptively gate tactile integration, prioritizing residuals specifically during visually unreliable phases to explicitly prevent visual dominance. Experimental results show that ResTacVLA consistently outperforms all baselines on a diverse set of contact-rich manipulation tasks, while remaining robust to unexpected dynamic disturbances. Project page: https://awilekong.github.io/ResTacVLA/

Touch supplies the physical grounding needed to perceive intrinsic material properties, such as friction and compliance, that vision alone often cannot resolve. Recent efforts for equipping multimodal LLMs with this tactile sense, however, expose a zero-sum trade-off: the limited parameter budget of compact models forces a choice between acquiring the new sensory modality and preserving the established vision-language reasoning. We present Splash, a mask-isolated tactile alignment learning framework for MLLMs. Splash quantifies the significance of each pretrained parameter, and partitions the parameter space into a dormant and critical subspace. While the frozen critical subspace acts as a stable anchor to safeguard general visual knowledge, Splash updates the isolated dormant subspace to internalize tactile alignment towards LLMs. This selective, non-destructive expansion effectively prevents catastrophic forgetting and ensures non-destructive modality expansion. Extensive experiments show that Splash effectively achieves tactile reasoning without additional inference overhead in the LLM part, demonstrating state-of-the-art performance on visuo-tactile benchmarks, including SSVTP, TVL, and TacQuad, while preserving its original general-purpose capabilities.

Is the sense of touch a mechanism for human babies' learning of visual concepts? If so, can we quantify its importance, and to what extent do babies rely on their sense of touch for visual learning? To approach these questions in a principled way, we propose a structured coding system for baby-centric touch events, yielding a dataset of 264k two-second clips of touch events coded according to this system. Using this dataset, we pretrain developmentally grounded models that reveal promising insights into the nature of baby learning from touch.

Vision-language-action (VLA) models have achieved strong performance in many robotic manipulation tasks, yet remain limited in contact-rich dexterous manipulation. To overcome this limitation, recent vision-tactile-language-action (VTLA) methods incorporate tactile sensing into VLA models to provide direct contact information. However, they typically treat tactile signals as passive auxiliary inputs, making it difficult to model tactile semantics and future physical interactions. To this end, we propose a unified tactile learning framework for contact-rich manipulation that models tactile signals as dynamic interaction cues for both contact understanding and prediction. Specifically, we construct a unified tactile latent space and jointly model current tactile states and future contact changes through tactile chain-of-thought reasoning and coarse-to-fine future tactile prediction, thereby forming a state-aware and dynamics-aware tactile prior. Based on this prior, we introduce a tactile-action mixed controller that combines real-time and predicted tactile feedback to refine low-frequency action chunks with high-frequency corrections. Real-world experiments on four categories of contact-rich tasks, including adjustment, insertion, wiping, and assembly, under both clean and externally perturbed settings, show that our method improves success rate, manipulation accuracy, and contact robustness over existing methods, demonstrating its effectiveness in dexterous physical interaction.

For robots manipulating open-world objects, tactile representations must generalize to unseen materials. We introduce RCT (Robotic Contact Tactile), a robot-collected touch-vision-language dataset with 29,279 tactile frames from full robot presses on 122 industrial reference materials in 7 categories, recorded with three DIGIT sensors at multiple contact positions. RCT preserves each press as a contact sequence, enabling held-out evaluation across materials, categories, sensors, contact positions, and contact sequences. Frames from one press are strongly correlated: frame-random splits can place near-duplicate observations of the same physical interaction in both training and test. With the encoder held fixed, removing contact-sequence overlap reduces tactile-to-text Recall@1 by 17.7 percentage points. When materials are additionally held out at training time, performance drops sharply, leaving held-out-material Recall@1 at 25.1 +/- 6.1% averaged over three held-out draws. The public TVL/HCT split shows the same structure: every test contact sequence appears in training, and raw-pixel nearest neighbors recover the correct sequence in 98.3% of cases. Uniformly sampling a press improves contrastive training, and RCT-trained embeddings improve category probes on unseen materials. RCT makes contact-sequence-aware, held-out-material evaluation reproducible and exposes novel-material generalization as a central challenge for robotic tactile perception. The RCT dataset is open-sourced at https://faerber-lab.github.io/RCT/