cs.LGMar 20, 2025

A self-learning framework for adaptive free-form pipe routing in aeroengines

Authors: Caicheng Wang, Zili Wang, Shuyou Zhang, Yongzhe Xiang, Zheyi Li, Jianrong Tan

Organizations: State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, 310027, China · Engineering Research Center for Design Engineering and Digital Twin of Zhejiang Province, Zhejiang University, Hangzhou, 310027, China

Read PDF
Ask AI
Cite

Copy citation

DOINot available for this paper

Abstract

Pipe routing is a highly complex, time-consuming, and no-deterministic polynomial-time hard (NP-hard) problem in aeroengine design. Despite extensive research efforts in optimizing constant-curvature pipe routing, the growing demand for free-form pipes poses new challenges. Dynamic design environments and fuzzy layout rules further impact the optimization performance and efficiency. To tackle these challenges, this study proposes a self-learning-based method (SLPR) for optimizing free-form pipe routing in aeroengines. The SLPR is based on the proximal policy optimization (PPO) algorithm and integrates a unified rule modeling framework for efficient obstacle detection and fuzzy rule modeling in continuous space. Additionally, a potential energy table is constructed to enable rapid queries of layout tendencies and interference. The agent within SLPR iteratively refines pipe routing and accumulates the design knowledge through interaction with the environment. Once the design environment shifts, the agent can swiftly adapt by fine-tuning network parameters. Comparative tests reveal that SLPR ensures smooth pipe routing through cubic non-uniform B-spline (NURBS) curves, avoiding redundant pipe segments found in constant-curvature pipe routing. Results in both static and dynamic design environments demonstrate that SLPR outperforms three representative baselines in terms of the pipe length reduction, the adherence to layout rules, the path complexity, and the computational efficiency. Furthermore, tests in dynamic environments indicate that SLPR eliminates labor-intensive searches from scratch and even yields superior solutions compared to the retrained model. These results highlight the practical value of SLPR for real-world pipe routing, meeting lightweight, precision, and sustainability requirements of the modern aeroengine design.

More in this topic

RL for Combinatorial Optimization

Reinforcement learning for combinatorial optimization learns sequential decisions and search strategies for difficult discrete problems.

See all 106 papers

Explore similar work

CardsList
May 20, 2026

Design for Manufacturing: A Manufacturability Knowledge-Integrated Reinforcement Learning Framework for Free-Form Pipe Routing in Aeroengines

Design for manufacturing plays a critical role in advanced aeroengine development, where complex components necessitate careful consideration of manufacturability. However, current practices in pipe routing remain largely decoupled from down-stream manufacturing, leading to labor-intensive, trial-and-error iterations to achieve manufacturable designs. To address this problem, this study proposes the Frenet-based pipe routing optimization (FPRO) framework, a manufacturability knowledge-integrated reinforcement learning approach for free-form pipe design in aeroengines. FPRO formulates the routing problem as a boundary value problem in the Frenet frame. In this framework, the pipe path is represented by curvature and torsion profiles, which are generated using cubic Hermite interpolation. To integrate design and manufacturing, domain-specific manufacturing knowledge is embedded as constraints on the permissible ranges of curvature and torsion. The path optimization is performed using the proximal policy optimization algorithm with stochastic exploration and a stage-guided reward mechanism. A unified mapping formulation then translates the optimized path into motion trajectories for the bending die, enabling direct fabrication on a six-axis free-bending machine. Experimental results demonstrate that FPRO consistently generates collision-free, manufacturable paths with smoother geometric profiles compared to Cartesian-based methods. It also achieves faster convergence and superior performance in terminal alignment, path length, obstacle avoidance, and manufacturability compared to state-of-the-art reinforcement learning baselines. Real-world validation confirms the close geometric correspondence between the manufactured pipe and its digital design, validating the practical feasibility of FPRO.

Caicheng Wang, Zili Wang, Shuyou Zhang +4

1. State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, 310027, China · 2. Engineering Research Center for Design Engineering and Digital Twin of Zhejiang Province, Zhejiang University, Hangzhou, 310027, China · 3. Zhejiang Changxing Heliang Intelligent Equipment Co., Ltd., Huzhou 313000, China

Motion Planning
AskPDF
Oct 26, 2026

VisGeo-PipeTrack: A Visual Geometric Servo Control Framework with MPC-RCAPID Control for UAV-Based Dynamic Pipes Tracking

While unmanned aerial vehicles (UAVs) are increasingly deployed for pipeline inspection, prevailing research predominantly assumes static pipes. In real-world industrial environments, pipes often exhibit dynamic movements, such as vibrations. This imposes more stringent requirements on UAVs' adaptive control and computational efficiency than in static scenarios. Therefore, this paper proposes a servo control framework named VisGeo-PipeTrack, which utilizes geometric constraints to enable UAV tracking of dynamic pipes. To achieve efficient UAV positioning, YOLOv5 is employed to detect labels on the pipe. The positions are derived from visual geometric constraints based on these detected labels to enable precise localization. To address tracking control challenges, a model predictive control based real-time corrected adaptive PID (MPC-RCAPID) controller is proposed. This controller employs the Recursive Least Squares method for real-time model estimation and integrates rolling horizon optimization to dynamically adjust PID parameters. Experiments conducted on both the AirSim simulator and the Tello UAV platform validate the effectiveness of the proposed framework. Simulation comparisons with standard PID, fractional-order PID, adaptive PID, and fuzzy PID demonstrate that MPC-RCAPID achieves the shortest settling time (3.26 s) and the lowest average tracking error (3.52%). In physical experiments on the Tello platform, compared with standard PID control, MPC-RCAPID reduces the average tracking error by 55.52%, 26.72%, and 26.52% across the three test dimensions. These results demonstrate that VisGeo-PipeTrack facilitates efficient autonomous tracking in dynamic pipe environments.

Zhenyang Gao, Jianlin Chen, Yang Yu +3

School of Civil Aviation, Northwestern Polytechnical University, 127 West Youyi Road, Xi’an Shaanxi, 710072, P. R. China. · School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai 200240, P. R. China.

Quadrotor ControlVision-Based Robot ControlAdaptive MPCVisual Object TrackingIndustrial Inspection
AskPDF
Apr 8, 2026

TurboAgent: An LLM-Driven Autonomous Multi-Agent Framework for Turbomachinery Aerodynamic Design

The aerodynamic design of turbomachinery is a complex and tightly coupled multi-stage process involving geometry generation, performance prediction, optimization, and high-fidelity physical validation. Existing intelligent design approaches typically focus on individual stages or rely on loosely coupled pipelines, making fully autonomous end-to-end design challenging. To address this issue, this study proposes TurboAgent, a large language model (LLM)-driven autonomous multi-agent framework for turbomachinery aerodynamic design and optimization. The LLM serves as the core for task planning and coordination, while specialized agents handle generative design, rapid performance prediction, multi-objective optimization, and physics-based validation. The framework transforms traditional trial-and-error design into a data-driven collaborative workflow, with high-fidelity simulations retained for final verification. A transonic single-rotor compressor is used for validation. The results show strong agreement between target performance, generated designs, and CFD simulations. The coefficients of determination for mass flow rate, total pressure ratio, and isentropic efficiency all exceed 0.91, with normalized RMSE values below 8%. The optimization agent further improves isentropic efficiency by 1.61% and total pressure ratio by 3.02%. The complete workflow can be executed within approximately 30 minutes under parallel computing. These results demonstrate that TurboAgent enables an autonomous closed-loop design process from natural language requirements to final design generation, providing an efficient and scalable paradigm for turbomachinery aerodynamic design.

Juan Du, Yueteng Wu, Pan Zhao +4

Digital Twin Research Center, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China · National Key Laboratory of Science and Technology on Advanced Light-duty Gas-Turbine, Chinese Academy of Sciences, Beijing 100190, China · University of Chinese Academy of Sciences, Beijing 100190, China +1

Large Language Model-Guided OptimizationMulti-Agent LLM Systems
AskPDF