Rationale Behind Human-Led Autonomous Truck Platooning

Vehicle platooning has attracted increasing attention as a promising approach to improve traffic efficiency, energy consumption, and roadway safety through coordinated multi-vehicle operation. A key challenge in platooning lies in maintaining stable and accurate path tracking during dynamic maneuvers such as lane changes, where lateral deviations and heading disturbances generated by the lead vehicle may propagate downstream to following vehicles. Robust longitudinal and lateral control systems are therefore essential not only for individual vehicle tracking performance, but also for overall platoon stability. For experimental studies, the Intelligent Mobility and Robotics Lab (IMRL) develops a scaled multi-vehicle platform for autonomous platooning research, with a particular emphasis on cooperative control and human-in-the-loop autonomy. This platform consists of one human-operable lead vehicle and two autonomous followers, enabling controlled and repeatable experiments on leader-follower coordination. Compared with full-scale field testing, this scaled platform offers a safer, lower-cost, and more flexible environment for rapid prototyping, controller validation, and multi-agent autonomy studies, while providing stronger physical realism than purely simulation-based evaluations.

The dominance of traditional rule-based methods in autonomous driving has gradually been replaced by learning-based approaches. While learning-based planners have achieved considerable success in passenger vehicles, their performance on heavy-duty trucks, particularly modern distributed electric-drive trucks (DETs), remains largely unexplored. To facilitate research and application of learning-based planners in DETs, this letter presents the first high-fidelity benchmark, called nuTruck, designed to support large-scale neural network training and closed-loop evaluation. Given the complex dynamics and high rollover susceptibility of DETs, we first incorporate a highly accurate nonlinear truck dynamical model into the simulation, which enables independent driving and steering of all wheels and captures dynamic load transfer caused by acceleration, deceleration, and cornering, thereby allowing quantitative assessment of rollover risk in closed-loop simulation. Second, we adapt several rule-based and learning-based planners as baselines for DETs and evaluate their performance in closed-loop simulation. Finally, using real-world driving scenarios from the nuPlan dataset, we conduct extensive closed-loop evaluations, analyzing not only conventional collision-free planning performance, but also the dynamical safety of the planned trajectories. The proposed nuTruck benchmark is expected to serve as a new standard for fair and realistic evaluation of autonomous driving planners on DETs.

Autonomous driving technology has rapidly evolved over the past decade, offering significant improvements in transportation efficiency, safety, and cost reduction. While much of the progress has focused on highway driving and obstacle avoidance, low-speed maneuvers such as parking remain among the most difficult challenges for autonomous systems. This challenge is especially pronounced in trailer-truck transport vehicles due to their articulated motion and environmental constraints. This paper presents a proposed framework for autonomous truck parking that integrates perception, motion planning, control systems, and infrastructure awareness. By combining sensor fusion, Hybrid A* path planning, nonlinear model predictive control (NMPC), and data-driven parking systems, this work highlights the importance of system-level coordination for reliable and scalable autonomous parking solutions. As a proof-of-concept implementation, we adapted an open-source A* path planning simulation to incorporate a tractor-trailer kinematic model, demonstrating articulated vehicle path planning within a command-line simulation environment, with jackknife prevention identified as an area requiring further development.