Organizations: MBZUAI · HKUST (GZ) · Zhejiang University
Abstract
Fast and reliable initialization is critical for monocular visual-inertial navigation systems (VINS), as it establishes the starting conditions for subsequent state estimation. Despite steady progress, most existing methods heavily rely on visual feature correspondences and require 3-4 seconds of sensory data for successful initialization, which limits their applicability and efficiency. With the advent of feed-forward 3D models that can directly predict point clouds from images, we revisit the visual-inertial initialization problem from a concise perspective. In this work, we propose a feature-free initialization framework that leverages up-to-scale point clouds predicted by a feed-forward 3D model, thereby obviating the need for visual feature tracking and estimation. This design substantially reduces system complexity and improves the reliability of initialization. Experiments on public datasets demonstrate that the proposed feature-free initialization method achieves the highest success rate, exceeding 90%, and significantly reduces the data duration required for successful initialization, typically to under 1.2 s. We further validate our method on a self-collected dataset covering various indoor and outdoor scenarios, demonstrating robust performance, particularly in visually degraded environments where existing methods often fail. The code and dataset are available at https://github.com/Yuantai-Z/FF-VIO-Init.
A simultaneous localization and mapping (SLAM) method using a monocular camera and a low-cost inertial measurement unit (IMU) sensor is an effective way to fulfill a low-cost sensor configuration. Using this sensor configuration, visual-inertial system (VINS) focuses on fusing data from a camera and an IMU sensor to estimate the six degrees-of-freedom (DOF) of the sensor pose. Typically, VINS uses only a single camera as visual input, which lead to problems such as error accumulation due to occlusion, various illumination, and textureless environments. In this paper, we propose a new multiple fisheye camera-based visual-inertial system called MFVINS. We present an IMU-aided FAST feature tracker for multiple cameras that enables efficient extraction and robust matching of local features. Then, the proposed method filters out outliers caused by fisheye distortion on the normalized image plane. Subsequently, a new reprojection error with physical validity constraints is proposed for bundle adjustment using learning-based depth estimation. The proposed method is applied to various scenarios, and its effectiveness is demonstrated by comparing previous VINS methods. In particular, MFVINS is implemented in real-time process to leverage the advantages of using multiple cameras -- robustness against occlusion and textureless regions -- while reducing the computational burden.
This paper presents an analysis of the observability and consistency properties of filtering-based visual-inertial navigation systems (VINS) that utilize anchored feature representations. The unobservable subspace of VINS with anchored landmark parameterizations is shown to be independent of the estimated landmark state, which leads to improved estimator consistency properties without any additional modifications. However, the unobservable subspace is still found to depend on the estimated navigation state, necessitating additional consistency-enforcing techniques. Two methods to improve the consistency of VINS with anchored feature representations are presented. Simulation results showcase that all estimators employing anchored feature paramterizations exhibit improved consistency properties compared to algorithms that estimate features resolved in a global reference frame, especially in scenarios where feature initialization may be poor. Real-world experiments on the TUM-VI dataset showcase that the use of anchored feature representations alone can yield comparable performance to consistency-improved estimators employing a global feature representation, demonstrating the benefit of using anchored feature parameterizations for VINS.
Mitchell Cohen, Vassili Korotkine, James Richard Forbes
3D foundation models (3DFMs) excel at predicting camera poses and dense depth from multiple views of a scene, showcasing strong zero-shot generalization. However, as metric scale is not observable from monocular images, their absolute scale predictions are typically inaccurate. Inertial measurement units (IMUs), present in most devices, naturally complement monocular cameras by observing scaled motion. We introduce VI3, a model-agnostic framework that metrically anchors a pretrained 3DFM using only IMU readings. VI3 initializes and preintegrates the IMU to obtain a metric motion reference, which is then used to recover the scale of the 3DFM outputs. Our method includes adaptable anchoring strategies tailored to diverse 3DFM architectures. Experiments on synthetic and real aerial datasets demonstrate that VI3 recovers metric scale without ground-truth supervision while preserving geometric consistency, acting as a fine refinement under well-conditioned motion and as a strong prior when motion is less informative.