RadarSim: Simulating Single-Chip Radar via Multimodal Neural Fields
Authors: Chuhan Chen, Tianshu Huang, Akarsh Prabhakara, Chaithanya Kumar Mummadi, Zhongxiao Cong, Anthony Rowe, Matthew O'Toole, Deva Ramanan
Organizations: Carnegie Mellon University · Bosch Research · University of Wisconsin–Madison
Abstract
Radars are an ideal complement to cameras: both are inexpensive, solid-state sensors, with cameras offering fine angular resolution, while radars provide metric depth and robustness under adverse weather. However, radar data is more difficult to interpret than camera images and varies significantly between sensors, necessitating increased reliance on simulation for prototyping sensors and processing pipelines. Recent work treating radar reconstruction as a novel view synthesis problem has shown great promise in reconstructing radar-relevant geometry and simulating low-level radar data. However, such methods are constrained by the low spatial resolution of the underlying radar. To address this, we propose a unified differentiable renderer, RadarSim, which leverages the high angular resolution of RGB cameras to generate Doppler radar range images from a camera-initialized neural field. Using a novel data set of calibrated radar camera recordings from a custom hand-held rig, we demonstrate that RadarSim produces sharper geometry and Doppler range frames than radar-only reconstructions.
Low-cost millimeter automotive radar has received more and more attention due to its ability to handle adverse weather and lighting conditions in autonomous driving. However, the lack of quality datasets hinders research and development. We report a new method that is able to simulate 4D millimeter wave radar signals including pitch, yaw, range, and Doppler velocity along with radar signal strength (RSS) using camera image, light detection and ranging (lidar) point cloud, and ego-velocity. The method is based on two new neural networks: 1) DIS-Net, which estimates the spatial distribution and number of radar signals, and 2) RSS-Net, which predicts the RSS of the signal based on appearance and geometric information. We have implemented and tested our method using open datasets from 3 different models of commercial automotive radar. The experimental results show that our method can successfully generate high-fidelity radar signals. Moreover, we have trained a popular object detection neural network with data augmented by our synthesized radar. The network outperforms the counterpart trained only on raw radar data, a promising result to facilitate future radar-based research and development.
Solving novel view synthesis (NVS) for millimeter-wave (mmWave) radar requires a renderer that is physically faithful, complex-valued, and multi-viewpoint-tractable. No prior method achieves these three properties simultaneously. Differentiable Monte Carlo (MC) ray tracers implement the radar forward model directly with explicit material modeling and complex outputs, but do not scale to the multi-view optimization NVS demands. Optical-NVS ports of NeRF, hash grids, and 3D Gaussians train fast but discard phase and replace explicit material modeling with opaque learned features, restricting them to power-only range-azimuth (RA) magnitudes. We propose 3D Point Splatting (3DPS), the first differentiable point renderer for radar, derived directly from the standard solid-angle form of the radar equation. Each oriented 3D point carries an ITU-R P.2040 material model, evaluated in closed form, with the resulting complex phasor splatted into range bins through a precomputed point spread function (PSF). The complex-valued output makes the renderer product-agnostic. The same optimized scene yields analog-to-digital converter (ADC), complex range profile (CRP), and RA outputs through standard fast Fourier transform (FFT) pipelines without retraining for each format. On six outdoor ColoRadar scenes, 3DPS reaches 0.587 mean Pearson correlation on held-out RA images. This is between 1.7x and 5.2x the three optical-NVS baselines (RadarSplat, Radar Fields, DART). Training takes approximately 3 minutes per scene on a single RTX 4090.
Millimeter-wave (mmWave) radar perception is limited by data scarcity: models trained on existing radar datasets fail to generalize to new objects, environments, and sensing trajectories. We present RadarTwin, a framework for generating deployment-specific radar training data before real data collection. Given a 3D reconstruction of a target space (phone LiDAR, robot-mounted sensing, or RGB-to-3D), RadarTwin uses a vision-language model to infer radar-relevant surface materials and a physics-based ray tracer to synthesize raw frequency-modulated continuous-wave (FMCW) radar measurements with multi-bounce propagation. To study what transfers from simulation to reality, we collect a paired real-simulated dataset spanning household objects, material classes, distances, rotations, translations, and mobile sensing trajectories. We show that simulated and real radar share the same object-discriminative shape and material features, and that modeling the environment's multipath is essential to matching real measurements. A representation trained on simulation alone recognizes real objects at 2.5 times chance with no real radar labels, and a few labeled examples raise this to 95.3% on a 12-way recognition task. RadarTwin enables training radar perception for a new space before any real radar data is collected there.