Unmanned aerial vehicles (UAVs) are increasingly used for active sensing and information gathering in spatially distributed environments. Their performance, however, is constrained by limited flight time, sensing uncertainty, and the trade-off between spatial coverage and observation accuracy. This paper presents a real-world validation of a multi-UAV active sensing framework for probabilistic binary terrain mapping, with precision agriculture used as the application case. The environment is represented as a probabilistic belief map, where spatial dependencies are modeled through a factor-graph formulation. UAV decision making is guided by Information Gain based Informative Path Planning (IGbIPP), and the approach is compared with Random Walk and Sweep coverage path planning baselines using both synthetic terrains and real UAV-derived agricultural imagery. The study also evaluates spatial correlation weights and several probabilistic belief-fusion rules for multi-UAV information sharing. Results show that IGbIPP reduces entropy and mapping error more effectively than the baselines, while a wider field of view improves real-world coverage and map accuracy. The results further show that simple equal or biased spatial weights can be more robust than adaptive weights, and that Bayesian, log-odds, and Dempster--Shafer fusion achieve the best cooperative mapping performance. These findings highlight the importance of uncertainty-driven planning, sensing geometry, spatial modeling, and probabilistic fusion for real-world UAV-based active sensing.
Safe ground navigation in large, threat-augmented environments requires aerial support that actively reduces the risks that a ground vehicle faces along its route. Existing aerial reconnaissance systems focus on mapping or covering the environment, but do not direct sensing toward regions that are most relevant for ground vehicle safety. In this paper, we address the problem of coordinating a team of unmanned aerial vehicles (UAVs) to improve the safety of an unmanned ground vehicle (UGV) navigating through unknown threat zones. A key aspect of our approach is a shared exposure belief that is updated online from aerial observations and used jointly by the UAV team and the ground vehicle. This enables us to direct aerial sensing towards route-relevant regions while allowing the UGV to replan around newly revealed threats. We coordinate the UAV team through spatial region assignment to avoid redundant sensing. Simulation experiments show that our approach reduces cumulative UGV exposure by 38% compared to a system that does not account for hazard levels, and reduces redundant aerial coverage from 38.8% to 3.7% under our multi-UAV coordination scheme.
Uncrewed aerial vehicles (UAVs) are increasingly used for exploration-driven monitoring in hazardous environments such as disaster zones, contaminated sites, wildfire areas, and damaged infrastructure, where limited flight endurance must be allocated between visiting reported locations and gathering new information. In these settings, prior information regarding hazards is often incomplete, spatially imprecise, and subject to change during execution. For example, initial reports may identify a region where a hazard is likely to exist, but the actual hazard may be displaced, partially observed, or entirely unreported. We present an integrated exploration-aware UAV route optimization and path planning framework for hazard monitoring under uncertain and evolving prior information. The environment is represented as a spatial risk map, where each location has an associated belief of hazardous conditions. Reported hazards are modeled as uncertain regions of interest (ROIs) rather than confirmed target locations, requiring the UAV to inspect reported areas while also using its limited flight endurance to explore informative regions. The proposed method solves a vehicle routing problem over reported ROIs, augments the route with auxiliary pseudo-nodes to improve spatial coverage, allocates the remaining flight distance budget across route segments, and optimizes dynamically feasible B-spline trajectories for local exploration. During execution, UAV measurements update a grid-based belief map, and the remaining trajectory is replanned when new information and the remaining budget justify adaptation. Across 48 scenario configurations, online replanning improves average KL reduction by 15.9% over the offline optimized planner and 48.6% over straight-line traversal.
Safe and efficient trajectory planning in unknown, cluttered 3D environments constitutes a critical bottleneck for deploying Unmanned Aerial Vehicles (UAVs) in real-world applications. This challenge is further exacerbated by the limited field-of-view (FOV) and sensing range of onboard sensors. Many existing methods either make simplistic assumptions about unexplored space or rely on conservative heuristics such as speed limits or fixed perception patterns, reducing efficiency and generalizing poorly across different sensor types. In this work, we propose a novel planning framework that directly integrates active perception into trajectory optimization, thereby improving safety while preserving efficiency. The perception constraints are derived from the UAV's dynamic model and formulated in the sensor coordinate frame, which enables precise handling of FOV geometry. The velocity-triggered activation mechanism enables the planner to balance perception and motion efficiency. We introduce an active perception sub-trajectory segment with parametric start-time optimization, mitigating collision risks from late obstacle detection. Our formulation enables active perception during arbitrary 3D maneuvers, extending beyond prior methods designed mainly for horizontal motion. All constraints and penalties are incorporated into a differentiable optimization problem, so the planner requires only a simple front-end global path for guidance, rather than a computationally expensive perception-aware path generator. Extensive simulations and real-world experiments demonstrate robust performance across diverse unknown environments with varying sensor configurations.