Karst aquifers provide critical freshwater resources but pose significant hazards due to their complex and poorly understood subsurface geometry. Mapping these environments is challenging because sonar data from underwater exploration is sparse and noisy, while navigation estimates suffer from drift limiting standard 3D reconstruction methods. We present a pipeline for reconstructing underwater karst conduits from a sonar profiler. We combine a continuous-time SLAM approach to correct trajectory drift with a novel two-stage deep learning method for surface reconstruction, producing an immersive and navigable 3D mesh for hydrogeological analysis.
Sonar is often the only modality suitable for high-resolution imaging underwater due to light attenuation and turbidity. Forward-looking imaging sonar provides measurements over range and horizontal angle but collapses vertical structure into a flat image, creating ambiguities that make 3D recovery challenging. A common use case for imaging sonar is underwater terrain mapping (bathymetry), yet current methods require many views, expensive multi-sensor setups, or significant training data, which limits use and adaptability to new environments. We present a training-free method that recovers bathymetry from a single sonar image in under 30 seconds via differentiable rendering, conditioned on a known seafloor tilt. To our knowledge, this is the first differentiable rendering approach for single-view height recovery in sonar. Our method implements differentiable sonar ray tracing and optimizes an explicit height field to reproduce the target image. On synthetic datasets, our approach outperforms a supervised CNN under distribution shift and remains close on rough terrain, while the CNN wins in-distribution. By modeling physically grounded priors of the sonar process, our method adapts across sensor configurations and environments without training data.
Reliable perception is essential for underwater vehicles operating in complex environments, where light attenuation and scattering often degrade visibility and compromise optical sensing. Forward-looking sonar (FLS) offers an alternative by providing high-frame-rate acoustic imaging under poor optical conditions. However, real-time FLS mapping remains challenging due to unresolved target elevation, spatially non-uniform noise, and fragmented target boundaries, which hinder feature extraction and introduce geometric ambiguity during projection. To address these challenges, we propose a cascaded feature reconstruction pipeline combining fast Fourier transform (FFT)-based denoising, fast multiscale constant false alarm rate (MCFAR) detection, and gradient-adaptive boundary connection to extract geometric features from degraded sonar images with low latency. We integrate attitude-aware geometric projection with incremental occupancy accumulation to construct a depth-referenced 2.5D map for local mapping in confined underwater environments. The sonar's vertical position is referenced to an external sensor, while target elevation is assigned under an explicit geometric assumption rather than measured directly by FLS. Experiments in a 3 m X 5 m pool demonstrate centimeter-scale planar mapping accuracy, with a root-mean-square error (RMSE) below 3 cm across three sequences and an average processing time of 42.4 ms per frame.
Reliable feedforward underwater 3D reconstruction remains challenging due to severe light attenuation and backscattering, which degrade visual quality and disrupt feature consistency across views, leading to inaccurate multi-view geometry. To address this issue, we propose WAT3R, a feed-forward framework for reconstructing 3D scenes directly from underwater images. By leveraging degradation adaptation as a geometry-constrained process, WAT3R integrates a lightweight neural adaptation module to flexibly account for these underwater imaging effects, thereby improving multi-view reconstruction quality. Implemented in a single forward pass, WAT3R directly and efficiently outputs pixel-aligned 3D point maps and camera poses from underwater videos, allowing a high-quality underwater 3D reconstruction. Experiments conducted on the FLSea, SQUID, and USOD10K datasets show that our method consistently outperforms state-of-the-art approaches on 3D reconstruction tasks, including multi-view/monocular depth estimation and camera pose estimation.