TRISTAR: Triple-Signal Stair Recognition and Vision-Only Indoor Navigation for Search-and-Rescue Micro-UAVs

Octavian Gîngu; Stelian Spînu

cs.CVJul 4, 2026

TRISTAR: Triple-Signal Stair Recognition and Vision-Only Indoor Navigation for Search-and-Rescue Micro-UAVs

Authors: Octavian Gîngu, Stelian Spînu

Organizations: Military Technical Academy “Ferdinand I”, Bucharest, Romania

Abstract

Indoor search-and-rescue (SAR) operations often require rapid situational awareness where GNSS signals are unavailable and human access is difficult or hazardous. While most autonomous aerial systems rely on LiDAR, stereo vision, or specialized depth cameras, such solutions increase both hardware complexity and deployment costs. This paper presents a complete autonomous indoor navigation framework for low-cost unmanned aerial vehicles based exclusively on monocular vision. Implemented on a DJI Tello platform, the system combines monocular depth estimation using Depth Anything V2 with classical computer vision and lightweight deep learning models for scene understanding, victim detection, and hazard recognition. The framework consists of two independent behaviors: (i) corridor exploration with automatic door detection, room entry, OCR-based room identification, and victim inspection; and (ii) autonomous stair ascent based on TRISTAR (TRI-Signal STair Ascent Recognition), a novel triple-sensor fusion method that integrates structural cues (Sobel filtering), texture analysis (multi-scale Gabor filtering), and geometric depth from monocular depth estimation. Evaluation used real indoor flights in a university building. Depth calibration reduced relative depth error from 27.4% to below 10%, while the door detection algorithm reached a precision of 0.93 and an F1-score of 0.91. A dedicated ablation study shows that multi-sensor fusion significantly improves stair-recognition robustness compared to individual sensing modalities, and a failure-case analysis delineates the limits of monocular perception under challenging lighting and reflective surfaces. The results demonstrate that reliable indoor exploration and stair traversal are achievable on resource-constrained platforms without specialized ranging hardware, a practical, cost-effective solution for rapid SAR deployment.

Explore similar work

Jun 5, 2026cs.RO

MinNav: Minimalist Navigation Using Optical Flow For Active Tiny Aerial Robots

Navigation using a monocular camera is pivotal for autonomous operation on tiny aerial robots due to their perfect balance of versatility, cost and accuracy. In this paper, we introduce MinNav, a navigation stack based on optical flow and its uncertainty to fly through a scene with static and dynamic obstacles and unknown-shaped gaps without any prior knowledge of the scene components and/or their locations/ordering. We further improve success rate by using the activeness of the robot to move around in an exploratory way to find obstacles and navigate. We successfully evaluate and demonstrate the proposed approach in many real-world experiments in various environments with static and dynamic obstacles and unknown-shaped gaps with an overall success rate of 70%. To the best of our knowledge, this is the first solution to tackle all the aforementioned navigation cases without prior knowledge using a monocular camera. Our approach is on par in performance with depth based methods with factors of magnitude less computation required and can readily run onboard tiny aerial robots. The accompanying video, supplementary material, code and dataset can be found at https://pear.wpi.edu/research/minnav.html

Aniket Patil, Mandeep Singh, Uday Girish Maradana +1

Aerial Robots Visual Odometry Obstacle Avoidance Optical Flow

Ask PDF

May 25, 2026cs.RO

NightSight: Passive Computation for Navigation in Dark Using Events

Small aerial robots are particularly well-suited for search and rescue in confined and hazardous environments due to their agility, low cost, and ability to traverse through cluttered spaces that are inaccessible to larger platforms. However, enabling autonomous navigation in complete darkness remains a significant challenge, because small aerial robots cannot easily accommodate perception systems that demand substantial payload, power, or computation. In this work, we present a lightweight perception approach that combines a monocular event camera, a coded aperture lens, and an infrared dot projector to enable navigation in such conditions. The projected pattern, when imaged through the coded aperture, produces depth dependent blur signatures that implicitly encode scene geometry. We train a convolutional neural network to decode these signatures into dense depth maps using only synthetic data generated from a simple planar wall setup. Despite this minimal training regime, the model generalizes zero-shot to complex real-world scenes. Our system operates in real time at 20 Hz on a NVIDIA Jetson Orin Nano, demonstrating suitability for resource-constrained platforms. We further analyze the impact of different coded aperture designs on depth estimation performance. Our approach gives high accuracy (l1 error 7.0cm) upto 2.5m range (2.80% error). These results highlight the potential of combining structured illumination, coded optics, and event-based sensing for enabling robust perception and navigation in complete darkness.

Deepak Singh, Brijan Vaghasiya, Shreyas Khobragade +1

Aerial Robots Autonomous Navigation Depth Estimation Navigation Passive

Ask PDF

Jul 22, 2026cs.RO

Robostral Navigate

Deploying navigation systems at scale requires a recipe that minimizes sensor assumptions, generalizes across robot embodiments, and trains efficiently. Yet, today's best systems depend on depth sensors, multi-camera rigs, or pre-built maps, limiting the hardware they support and increasing deployment cost. We introduce Robostral Navigate, an 8B vision-language model built around this scalability objective. The model consumes only a stream of monocular RGB images - the most ubiquitous sensor across robotic platforms and predicts waypoints by pointing to the next target location in the current camera view. Operating purely in image space, rather than robot-specific coordinates, makes the policy naturally robust to changes in camera intrinsics and scene scale, enabling deployment across wheeled, legged, and aerial robots without recalibration. We generate 2.4 million trajectories across 350k simulated scenes to reduce the reliance on real-world data collection and scale easily. We further introduce a prefix-caching training recipe that packs entire episodes into single training sequences, reducing training tokens by 22x and cutting training time from months to days. A tree-based attention mask prevents conditioning on previous ground-truth actions, encouraging visually grounded action prediction, and reinforcement learning is used to further improve exploration and recovery capabilities. On the Room-to-Room and Room-Across-Room in Continuous Environments (R2R-CE and RxR-CE) benchmarks, Robostral Navigate sets a new state of the art. On R2R-CE, it achieves a 77.4% success rate, surpassing the best monocular method by 10.5 points and the strongest depth- or multi-camera system by 5.3 points despite using only a single RGB camera. On RxR-CE, it reaches 75.1% success rate, outperforming all monocular baselines.

Abdelaziz Bounhar, Abhijeet Somani, Aditi Kabra +273

Robocasa Large Vision Language Models Aerial Robots Scalability

Ask PDF