mmSimPrior: Learning Simulation Priors for Data-Efficient and Generalizable Real-World Radar-based Human Motion Reconstruction
Authors: Cheng Guo, Qiming Cao, Shengkai Xu, Haoyu Xie, Kaixiang Su, Pu Wang, Hongfei Xue
Organizations: University of North Carolina at Charlotte, Charlotte, NC, USA · Purdue University, West Lafayette, IN, USA
Abstract
Millimeter-wave (mmWave) radar enables privacy-preserving and illumination-robust human motion reconstruction, but training generalizable models typically requires costly paired radar-motion recordings. Simulation can scale such supervision, yet even physics-based simulators cannot fully reproduce real-world multipath, clutter, hardware-specific response statistics, or distance-dependent resolution degradation, leaving a sim-to-real gap. We present mmSimPrior, a simulation-pretrained framework that factorizes transferable knowledge into signal, motion, and radar-to-motion mapping priors. To learn transferable signal and motion priors, we pretrain a multimodal radar encoder with a physics-informed domain-randomization curriculum designed to mitigate the sim-to-real gap by approximating real-world propagation- and acquisition-level variations, while a joint-temporal tokenizer learns a discrete prior over plausible human motion. A dual-mode mapping module predicts either motion-code distributions for structurally constrained zero-shot reconstruction or continuous motion parameters for flexible adaptation from limited real data. We further construct a 4.2M-frame, 31K-sequence dataset suite and introduce a No-Overlap Setting that prevents any exact subject-environment-location-motion tuple from appearing in both the adaptation and test sets. Experiments on mmSimPrior-Real and RT-Pose demonstrate consistent gains: with only 24 paired real sequences, mmSimPrior-Reg reduces MPJPE by 24.7-39.0% over the strongest baseline across the three environments, while mmSimPrior-Cls reduces zero-shot MPJPE by 8.5% without fine-tuning.
High-fidelity simulation of mmWave radar signals for dynamic human motion is valuable for developing radar-based human sensing models; yet collecting accurately labeled measurements for a specific deployment site remains expensive. We present HybridSim, a physics-learning hybrid simulator that synthesizes mmWave radar signals from dynamic human meshes under a fixed indoor room configuration, explicitly decoupling propagation into two components. To parameterize the human subject, we use a tri-plane representation to extract human features and a Graph Convolutional Network to stabilize optimization and mitigate gradient instability. The direct signal path is modeled via an inverse-rendering formulation with a microfacet BRDF to capture primary surface reflections. In parallel, the indirect path is approximated by combining 3D Gaussian Splatting with a virtual-receiver geometry to fit and reproduce site-specific multipath interference patterns, achieving substantially lower computational cost than explicit full ray tracing. Experiments in a fixed-room setting show improved agreement with a physically based reference and consistent gains on downstream radar-based human sensing tasks when using HybridSim for site-specific data augmentation.
Millimeter-wave (mmWave) radar perception is limited by data scarcity: models trained on existing radar datasets fail to generalize to new objects, environments, and sensing trajectories. We present RadarTwin, a framework for generating deployment-specific radar training data before real data collection. Given a 3D reconstruction of a target space (phone LiDAR, robot-mounted sensing, or RGB-to-3D), RadarTwin uses a vision-language model to infer radar-relevant surface materials and a physics-based ray tracer to synthesize raw frequency-modulated continuous-wave (FMCW) radar measurements with multi-bounce propagation. To study what transfers from simulation to reality, we collect a paired real-simulated dataset spanning household objects, material classes, distances, rotations, translations, and mobile sensing trajectories. We show that simulated and real radar share the same object-discriminative shape and material features, and that modeling the environment's multipath is essential to matching real measurements. A representation trained on simulation alone recognizes real objects at 2.5 times chance with no real radar labels, and a few labeled examples raise this to 95.3% on a 12-way recognition task. RadarTwin enables training radar perception for a new space before any real radar data is collected there.
Millimeter-wave (mmWave) radar enables privacy-friendly human sensing, but its sparse point clouds are physical measurements of view-dependent electromagnetic reflections and only indirectly characterize body articulation. Recovering a complete 3D pose from such partial, geometry-dependent observations is therefore under-constrained. Existing methods directly regress joint coordinates from paired radar-pose data, relying on the same limited paired supervision to learn radar perception, human-body structure, and their alignment. This coupling can encourage dataset-specific shortcuts under ambiguous radar observations. We propose Wave2Body, a radar-to-body token translation framework that decouples these learning targets using a self-supervised mmWave tokenizer, a pretrained compositional body tokenizer that defines the output space, and a lightweight translator between them. Experiments on M4Human and mmBody show that Wave2Body achieves stronger cross-domain generalization than previous methods while incurring much lower computational costs for training and inference. All the code and experiment results are publicly available at https://github.com/Galaxywalk/Wave2Body.