Robotic perception from a single viewpoint is often limited by self-occlusion and incomplete surface visibility. This paper presents DARP(Dual-Arm Robotic Perception) https://doi.org/10.21227/rmv3-be47, a calibrated dual-arm RGB-D-IR dataset for object-centered robotic perception using two independently moving eye-in-hand manipulators positioned on opposite sides of a shared tabletop workspace. Each arm carries an Intel RealSense sensor that continuously records RGB, depth, and stereo infrared data while synchronized robot joint states are logged for pose recovery. Objects are placed without fixed poses or marked locations, and the acquisition procedure performs automatic localization, cross-arm confirmation, adaptive viewpoint generation, and continuous multimodal recording. DARP contains ten unique tabletop objects and preserves the original sensor recordings, robot-state logs, object-level metadata, and calibration information required to reconstruct camera trajectories in a shared metric frame. To evaluate the geometric consistency of the acquisition, we implement a deterministic multi-view fusion pipeline that converts calibrated RGB-D observations into complementary partial point clouds and measured surface meshes without using learned or generative completion methods. Evaluation on 224 held-out RGB-D keyframes comprising 1,563,466 three-dimensional query points yields a median point-to-mesh distance of 2.13mm and an RMSE of 4.04mm, with 96.56% of points within 10~mm of the measured-surface mesh. DARP is intended as a reusable resource for multi-view reconstruction, collaborative robotic perception, multimodal fusion, active perception, and future learning-based reasoning over partial object observations.
Visuomotor policies for multi-fingered dexterous manipulation are highly sensitive to camera viewpoint shifts. To achieve view invariance, recent methods increasingly rely on explicit 3D modalities like RGB-D or point clouds, which can introduce hardware dependencies, calibration requirements, and vulnerability to sensor noise during real-world deployment. In this work, we show that view-invariant control can be achieved without explicit test-time 3D sensing by encoding geometric knowledge into the visual representation during simulation. We present AnyViewDex, an asymmetric training pipeline that combines multi-view contrastive alignment with privileged 3D geometric supervision. By regressing absolute 3D object coordinates during simulated training, this auxiliary objective provides a geometric grounding signal that mitigates the spatial collapse of the globally pooled contrastive embedding. At deployment, the policy operates zero-shot using only uncalibrated monocular RGB and proprioception. We validate this approach across both reinforcement learning and student-teacher distillation. In hardware evaluation on an xArm7 with a 16-DoF LEAP Hand, AnyViewDex reaches 76.7% grasping success across eight unseen objects and six uncalibrated viewpoints (480 trials; 2,400 across all ablation conditions), indicating that geometrically grounded monocular policies transfer zero-shot without test-time depth. Project Page: https://anyviewdex.github.io/
Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 284 sequences, 1,142 calibrated camera streams, and 109,769 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction.
Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman +9
Single-view mesh reconstruction predicts object meshes and spatial layouts from a single observation, making it attractive for fast robot spatial reasoning and real-to-sim digital twins. However, robot-mounted cameras naturally rotate during manipulation and navigation, while learned single-view reconstruction models often rely on view-dependent priors and may generalize poorly to out-of-distribution camera rotations. Such rotations can introduce 3D inconsistencies, incorrect layouts, and violations of physical constraints, but this failure mode remains under-evaluated. We introduce an evaluation protocol with controlled axis-wise roll, pitch, and yaw sweeps to trace errors in monocular depth estimation (MDE), canonical object meshes, camera-space layout, and physical plausibility within a representative SAM3D-style pipeline. On the Aria Digital Twin dataset and a real Franka wrist-camera sequence, camera rotations induce MDE distortion, layout drift, and collision penetration, while canonical mesh predictions remain relatively stable. A two-stage SAM3D+FoundationPose pipeline is more robust than one-stage feed-forward layout prediction, and our Gravity-Aware Refinement reduces one-stage pairwise ICP-based layout-orientation error by 47.1%. Our evaluation reveals that current single-view mesh reconstruction methods generalize poorly to robot camera rotation, and suggests that explicit gravity cues are important for reliable robotic single-view mesh reconstruction.