PRI-Net: A Lightweight Multimodal Framework for 3D UAV Localization

Reliable real-time 3D localization is essential for multi-UAV navigation, collision avoidance, and coordinated flight, yet onboard estimates can degrade under GNSS multipath, non-line-of-sight reception, vertical drift, and intentional interference. This paper presents a decentralized, lightweight 3D position-refinement layer that improves robustness by fusing each Unmanned Aerial Vehicle (UAV)'s local estimate with neighbor-shared state summaries and inter-UAV range or proximity constraints. The method performs uncertainty-aware neighborhood fusion by weighting each UAV's prior according to its reported covariance and weighting neighbor constraints according to link quality, ranging uncertainty, and a learned trust score. To support practical deployment, the framework explicitly handles cold start and temporary localization loss by inflating or substituting weak priors, allowing trusted neighborhood constraints to bootstrap and stabilize estimates until absolute sensing recovers. To mitigate the impact of faulty or malicious participants, each UAV applies a local range-consistency check, smoothed over time, to down-weight or exclude neighbors whose reported positions are incompatible with observed inter-UAV distances. Simulation experiments with 10 UAVs in a 3D volume show that the proposed refinement substantially reduces mean localization error during cold start, remains competitive after local estimators stabilize, and maintains lower error as the fraction of malicious nodes increases compared with fusion without trust. These results suggest that the approach can serve as a practical resilience layer for swarm operation in challenging environments.

Multimodal 3D object detection based on LiDAR and cameras has demonstrated excellent performance in ground-vehicle scenarios, but has not been explored for Unmanned Aerial Vehicle (UAV) platforms. In UAV top-down scenes, frequent groundobject occlusion dominated by tree canopies causes spatially varying and modality-dependent information degradation. Existing multimodal fusion frameworks neither explicitly model such ground-object occlusion nor embed occlusion awareness into the detection pipeline, limiting their performance in occluded UAV scenes. To address these challenges, we propose CAMF-Det, a closure-aware multimodal fusion framework for LiDAR-camera 3D object detection on UAV platforms, which derives dual-modal occlusion intensity through physics-inspired modeling and embeds them as priors throughout the detection pipeline. First, a dual-modal closure modeling module explicitly constructs occlusion intensity ground truth for both modalities offline via a Beer-Lambert-inspired formulation and building-mask correction. Second, using these ground-truth maps as supervision, a dual-modal prediction network converts the offline modeling results into online occlusion intensity predictions under single-frame inference. Third, both ground-truth and predicted occlusion intensity are injected into data augmentation, feature encoding, multimodal fusion, and detection head, enabling adaptive detection under spatially varying and modality-dependent information degradation. Experiments on two self-built UAV-based multimodal datasets, SI3D-DI and SI3D-DII, demonstrate that CAMF-Det achieves the best performance across all difficulty levels, with hard-level mAP$_{\mathrm{BEV}}$ improvements of 9.43% and 4.88% over the best competing methods, respectively. These results confirm the effectiveness of explicit occlusion prior modeling and exploitation for robust multimodal 3D detection in UAV scenes.

Accurate localization of unmanned aerial vehicles (UAVs) is essential for applications such as structural health monitoring, especially in environments where Global Positioning System (GPS) signals are denied or unreliable, like indoor spaces, tunnels, urban canyons, or areas beneath large structures. To address this challenge, we propose Cross-Fusion, a novel method for real-time UAV localization that integrates data from a 3D Light Detection and Ranging (LiDAR) and a monocular camera. A key contribution is its cross-session fusion strategy, which integrates visual and geometric information collected from multiple agents during routine baseline surveys to improve localization consistency and map completeness. The system employs LiDAR-based odometry for motion tracking and image-based feature matching via a single red-green-blue (RGB) camera to correct drift and improve accuracy. Unlike visual-inertial systems, Cross-Fusion maintains a simple sensor setup and avoids the complexity of stereo or global shutter configurations. Experimental results demonstrate that Cross-Fusion achieves localization accuracy comparable to GPS-based methods and performs reliably in challenging feature-sparse environments.