MAP2: Model- and Acceleration-Based Pursuit with MPC and Gaussian Process Residual Learning for Autonomous Racing

Autonomous race cars, such as in Formula Student Driverless, operate close to their physical handling limits. The resulting highly nonlinear vehicle behavior increases the path tracking complexity, especially on narrow tracks. Model Predictive Control (MPC) is commonly used to address this issue, a method whose performance is closely tied to the accuracy of the underlying prediction model. This paper presents a novel, real-time capable prediction model for autonomous race cars that adjusts to changing conditions by combining information from past runs and the current driving situation. Our model is divided into three consecutive submodels: a nominal Kinematic Bicycle Model, an offline Bayesian Linear Regression (BLR) model, and an online Sparse Gaussian Process Regression (SGPR) model. The proposed approach enables efficient integration of all available data without significantly increasing computational cost, ensuring high prediction accuracy and a quantitative uncertainty assessment right from the start of the run. Compared to existing approaches, an improvement in prediction accuracy of up to 57% was achieved. Further, we successfully demonstrated the practical applicability of the model within an MPC-based path tracking controller on a real Formula Student race car.

This paper presents Adaptive Differentiable Model Predictive Contouring Control (AD-MPCC), a framework for autonomous racing that integrates differentiable MPCC with online parameter estimation to handle varying road-surface conditions. For online parameter estimation, we leverage a parameterized Pacejka Magic Formula together with a regularized moving-horizon estimation scheme with exponentially decaying weights to capture road interactions and update parameters in real time. Furthermore, we propose a differentiable MPCC (Diff-MPCC) framework that enables optimal adjustment of objective weights based on predefined long-horizon performance costs. To implement Diff-MPCC for online objective weight adaptation, we propose a Pacejka-informed machine learning model that is trained in a supervised manner using data generated by Diff-MPCC to tune the objective weights. Simulation results demonstrate that AD-MPCC reliably ensures safety and achieves faster lap times compared to baseline controllers in both single-surface and multiple-surface scenarios.

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.