Disaster Damage Assessment

Follow this topic Ask about this topic

Momentum

3 papers in the last four weeks, level with the four weeks before. 0.0% of all new papers.

Jul 13Week of Sep 28

Latest papers 28

Sep 29, 2026cs.CV

Embedded Bi-Temporal Building Damage Assessment for On-Board Data Reduction

Rapid assessment of building damage after natural disasters is essential to support emergency response. Earth Observation satellites can acquire relevant imagery shortly after an event, but exploitation is limited by uplink and downlink capacity and by ground-processing latency. We address this with a bi-temporal building damage assessment pipeline built on a siamese detector derived from YOLOX, designed to compress information at both ends of the ground/space link. On the ground, pre-disaster reference images are encoded into a compact latent space -- compressed by up to a factor of 64 -- and uplinked to the satellite. On board, this reference is compared with a fresh post-disaster acquisition so that the downlink carries only actionable object-level products, bounding boxes and damage classes, instead of full scenes. This cuts the data exchanged in both directions, while on xBD the strongly compressed reference still preserves most of the detection performance. Because on-board acquisitions suffer from residual pre/post co-registration errors, we introduce a latent-space shift estimation and correction module that regresses the global offset from the coarse feature level and realigns the post-disaster features before fusion. It substantially improves robustness to de-registration -- especially under large shifts, where fusion-only variants collapse -- while also raising nominal accuracy and remaining compatible with the strongest compression. We finally port the pipeline to two embedded targets, a Xilinx Versal VCK190 and an NVIDIA Jetson AGX Orin, and report hardware performance (latency, throughput, power efficiency). The core detector and its compression port cleanly to both, but the operators needed for long-range robustness survive only on the Jetson GPU, whereas the Versal DPU does not.

Thomas Goudemant, Benjamin Francesconi, Marjorie Bellizzi +1

IRT Saint Exupéry, France · CNES, France

Disaster Damage Assessment Building Damage Assessment Edge Inference Remote Sensing Change Detection Remote Sensing

Sep 28, 2026cs.CV

Temporal Modelling for Burn Scars on Sentinel-3

Rapid and accurate burn scar delineation from satellite imagery is essential for post-fire damage assessment. Sentinel-3 OLCI, with daily revisit and 21 spectral bands, suits rapid mapping, yet most pipelines treat acquisitions independently, leaving the pre/post-fire change signal unexploited. We present a dataset of 246 wildfire activations (2016-2025) from the Copernicus Emergency Management Service, with Sentinel-3 OLCI temporally paired acquisitions. We benchmark spatial and temporal (ConvLSTM-augmented) variants of three backbones (U-Net, SegFormer, ConvNeXt-UPerNet) under two input modes and spectral configurations. Temporal modeling improves segmentation only when pre-fire frames are included, and a 5-band subset matches the full 21-band OLCI configuration.

Luca Barco, Edoardo Arnaudo, Andrea Bragagnolo +2

Politecnico di Torino, Torino, Italy · Fondazione LINKS, Torino, Italy

Remote Sensing Image Segmentation Disaster Damage Assessment Convolutional LSTM Remote Sensing Remote Sensing Benchmarks

Sep 14, 2026eess.IV

Multisource Remote Sensing and Geospatial Analysis of Vineyard Wildfire Impacts and Resilience: The 2019 Kincade Fire

Working agricultural landscapes are often treated as background to wildfire disasters, even though they are managed fuel mosaics, productive assets, and parts of regional infrastructure systems. We examine vineyard wildfire resilience during the electrically initiated 2019 Kincade Fire in Sonoma County, California, using an open, event-anchored geospatial framework spanning 4,581 vineyard fields (8,813.2 ha), wildland vegetation, surveyed structures, roads, overhead smoke, and post-fire greenness. Sentinel-2, OpenET, gridMET, soils, terrain, NOAA smoke polygons, an ignition-date OpenStreetMap network, and three-dimensional data inventories were analyzed at native decision scales. Vineyard pixels showed substantially lower descriptive dNBR than wildland pixels inside the perimeter (means 0.130 and 0.337). This contrast did not identify a universal vineyard firebreak effect: a segment-clustered boundary model gave a small negative contrast at 100 m (tau = -0.0166) but changed across bandwidths, failed slope continuity, disappeared in a 100 m donut, and produced a wrong-signed placebo. A 250 m spatial GAM reversed the unconditional pattern: after conditioning on location, terrain, and water use, vineyard fraction was positively associated with dNBR, while residual Moran's I remained 0.519. Beyond spectral impact, all mapped vineyards intersected overhead smoke on at least one day (mean 7.78 potential smoke-days per field), 34.2% of road-network nodes were dead ends, and inside-perimeter vineyards showed a larger greenness deficit through 2021 (recovery ratios 0.815 inside and 0.854 outside). Lower immediate spectral impact therefore did not imply complete resilience. The study provides a reproducible urban-rural informatics template separating descriptive contrasts, conditional associations, exposure indicators, and recovery evidence for decisions in working landscapes.

Parastoo Farajpoor, Mahla Ardebili Pour, Mohammad Bagher Ghiasi +1

Department of Biological and Agricultural Engineering, University of California, Davis, Davis, CA, 95616, USA · Department of Civil and Environmental Engineering, University of California, Davis, Davis, CA, 95616, USA · Department of Electrical and Computer Engineering, University of California, Davis, Davis, CA, 95616, USA +1

Disaster Damage Assessment

Sep 1, 2026cs.AI

Towards reliable multimodal disaster severity assessment through preference optimization and explainable vision-language reasoning

Reliable disaster damage assessment requires models that provide both accurate predictions and transparent explanations. However, existing multimodal approaches are limited by scarce annotated data and insufficient evaluation of reasoning quality. This study proposes a two-stage training framework that integrates Supervised Fine-Tuning (SFT) and Direct Preference Optimization (DPO) within a unified data construction pipeline. From a single Human-in-the-Loop (HITL) annotation workflow, two complementary datasets are derived, namely ReasoningSet, which contains validated rationales for SFT, and PreferenceSet, which comprises paired rationales for DPO-based alignment. The framework evaluates both classification performance and explanation quality using automatic metrics, model-based scoring, and human ranking. Experimental results show that SFT improves accuracy from 73.64% to 78.29% and increases Macro-F1 by 29% compared to the baseline, while explanation quality improves by approximately 25%. Subsequent DPO alignment further enhances interpretability on the PreferenceSet. Cross-model validation on InternVL-3-8B and LLaVA-1.5-7B demonstrates the robustness and generalizability of the approach. The proposed framework improves detection of underrepresented mild damage cases, reduces high-risk misclassifications, and strengthens alignment between model reasoning and human judgment. Overall, it provides a reproducible pathway to develop reliable multimodal systems that deliver auditable, actionable disaster insights for emergency management.

Yuanjun Zhang, Fuzel Ahamed Shaik, Suvojit Acharjee +2

Centre for Machine Vision & Signal Processing, University of Oulu, Pentti Kaiteran katu 1, PO Box 8000, Oulu, 90570, Finland · Department of CSE and Institute of Engineering and Management, 120 SDF Building, Saltlake Electronics Complex, Kolkata, 700091, India

Disaster Damage Assessment Multimodal Classification Multimodal Model Interpretability

Aug 31, 2026cs.CV

Quantum-Grassmann-Plucker Token Mixing for Deep Learning-Based Post-Disaster Damage Assessment

Timely post-disaster building damage assessment from satellite imagery is a critical engineering decision support task, yet it remains constrained by class imbalance, ambiguous intermediate damage states, and limited cross-event transferability. This study presents, to our knowledge, the first application of Grassmann-Plucker (GP) token mixing to computer vision and introduces two extensions for image classification: the Quantum-inspired Grassmann-Plucker (QGP) head and the Hybrid Quantum Machine Learning Grassmann-Plucker (HQML-GP) head. The GP head represents multiscale relationships among image patch tokens by encoding subspaces formed by token pairs with Plucker coordinates; QGP enriches these coordinates with amplitude-derived probability features, whereas HQML-GP incorporates expectation values generated by a simulated quantum circuit into the geometric token representation. Paired pre- and post-event image patches from the xBD tornado dataset were processed using a frozen six-channel Vision Transformer base encoder with 16 x 16-pixel patches. The three GP-based heads were compared with multilayer perceptron and Transformer baselines under identical training, checkpoint selection, and evaluation protocols. Joplin and Moore tornado samples were used for model development and seen-event testing, while Tuscaloosa was reserved for unseen-event evaluation. QGP led both test sets in accuracy and macro-F1: 83.46% and 64.50% for the seen events, and 66.45% and 52.70% for the unseen event. Although HQML-GP obtained the highest validation macro-F1 of 65.63%, it did not surpass QGP on either test set and required substantially more training time per epoch. These results establish GP token mixing as a competitive attention-free alternative to conventional Transformer-based token mixing for paired satellite image damage classification.

Kooroush Farahkhah, Umut Lagap, Taha Rezaei +1

Independent Researcher, Tabriz, Iran. · Centre for Urban Resilience and Analytics (CURA), Georgia Institute of Technology (Georgia Tech), US. · Department of Civil and Environmental Engineering, University of Exeter, Exeter, UK. +1

Disaster Damage Assessment Quantum Machine Learning Hybrid Quantum-Classical ML

Aug 30, 2026cs.MA

RAPIDMap: Rapid Multi-Agent Pipeline for Interpretable Disaster Mapping from Satellite and Street-view Imagery

Rapid and reliable disaster mapping of impacted areas, damaged infrastructure, and affected populations is essential for emergency response and recovery. However, existing AI-based approaches often require extensive manual annotation, lack cross-hazard generalization, and rely on single-modal observations. To address these challenges, this paper proposes RAPIDMap, a rapid multi-agent pipeline for zero-shot interpretable disaster mapping from satellite and street-view imagery. The framework integrates four intelligent agents: Disaster Perception Agent (DPA), Image Restoration Agent (IRA), Damage Recognition Agent (DRA), and Disaster Mapping Agent (DMA). By combining remote sensing and street-view data, RAPIDMap eliminates the need for manual fine-tuning, generalizes across multiple disaster categories, and generates structured, map-ready disaster intelligence with recovery recommendations.

Yifan Yang, Lei Zou

Department of Geography, Texas A&M University, College Station, TX, USA

Remote Sensing Image Understanding Disaster Damage Assessment Multimodal Agents

Aug 9, 2026cs.AI

Integrated Multimodal AI System for Retrieval-Augmented Reasoning, Object Sensing, and Damage Analysis

This work presents a unified multimodal AI system for damage assessment that integrates retrieval-augmented generation (RAG) models, thermal spectrum perception, vision foundation model pipelines, and exploratory wireless signal sensing. A RAG component is developed to ground a locally hosted language model in project-specific documentation, including specialized damage level classification criteria to mitigate hallucinations during inference. Controlled comparisons against static few-shot prompting demonstrate that dynamic retrieval improves grounding and factual consistency. We further compare vector-based RAG with a knowledge graph variant constructed via entity-relation extraction, and show that graph-based retrieval produces stronger responses for damage assessment queries requiring cross-document reasoning, motivating hybrid dense, sparse, and graph-aware retrieval. To address limitations of EO imagery under adverse lighting and weather conditions, infrared (IR)/thermal sensing is employed for object detection and segmentation. Our detectors generate candidate detections, yielding improved segmentation of a broad array of objects. Paired IR versus visible spectrum tracking experiments reveal failure modes, motivating multimodal fusion for robust object detection and damage analysis. Vision foundation and vision-language models are leveraged to generate synthetic damage imagery and classify damage severity with high accuracy, supporting training and validation of downstream damage assessment models. Finally, exploratory Wireless-based sensing demonstrates potential to detect presence, motion, and post-event environmental changes where EO and IR sensing are ineffective.

Kalelo Dukuray, Israel Pina, Evan Perez +2

Dept. of Computer Science, City College of New York, New York, NY 10031, USA · Air Force Research Lab, Rome, NY 13441, USA

Retrieval-Augmented Generation Disaster Damage Assessment Graph Retrieval-Augmented Generation Multimodal Fusion

Aug 3, 2026cs.LG

Adaptive Sampling for Automated Post-Disaster Rapid Damage Assessment via Level-Set Cost-Aware Bayesian Optimization

Natural disasters frequently inflict severe damage to the built environment, which demands a rapid, reliable, and cost-effective damage assessment for emergency response. However, traditional methods for post-disaster damage assessment often rely on static, labor-intensive data collection strategies that can be prohibitively expensive and struggle to adapt to dynamic post-disaster conditions. In this study, we propose a cost-aware Bayesian optimization framework combined with level-set estimation that continuously guides autonomous data collectors, e.g., an unmanned aerial vehicle (UAV), toward the most informative regions. By dynamically updating damage estimates across different geographic zones, our approach systematically reduces uncertainty while minimizing operational costs. The proposed framework is first validated using a controlled synthetic toy study, demonstrating the agent's ability to efficiently trace damage boundaries, recover the underlying damage map, and rapidly reduce predictive uncertainty. Furthermore, the approach is evaluated using high-fidelity disaster data generated by the Regional Resilience Determination (R2D) software. The results of the algorithm provide accurate and timely damage estimates that support informative and fast emergency response.

Boyang Xu, Mostafa Reisi Gahrooei, Mohammad Ilbeigi +1

School of Computing and Augmented Intelligence, Arizona State University · Department of Industrial and Systems Engineering, University of Florida · Department of Civil, Environmental and Ocean Engineering, Stevens Institute of Technology

Disaster Damage Assessment Building Damage Assessment Robotic Data Collection Bayesian Optimization Disaster Response Adaptive Sampling

Aug 3, 2026cs.CV

Assessing the Benefits of Combining Advanced Deep Learning Techniques for Post-Disaster Building Damage Assessment from UAV Imagery

Rapid and accurate post-disaster building damage assessment is essential, yet remains a challenging task. Unmanned Aerial Vehicle (UAV) imagery offers a timely and high-resolution view of affected areas, but existing Computer Vision (CV) models often demand large annotated datasets, generalize poorly across geographic regions and their assessment policies, and are confined to the specific tasks they were trained for. Large Vision-Language Models (LVLMs) offer a promising alternative through their strong reasoning and generalization capabilities, but fall short on precise, low-level perception tasks such as object detection and accurate bounding box generation. Furthermore, they often require a substantial amount of data for effective fine-tuning on domain-specific tasks. In this paper, we propose a hybrid framework that decouples detection from damage assessment, combining the precision of CV models with the reasoning power of LVLMs. A CV model first detects buildings and generates bounding boxes on the image that are then passed to an LVLM for damage classification and contextual interpretation. We evaluated our framework on two real-world benchmarks: RescueNet and FloodNet. In particular, the best combination under this framework accurately counts intact, partially damaged and completely destroyed buildings, surpassing isolated baselines by up to 2.1 R^2 points, while requiring only limited annotated data for the detection stage. Beyond reporting aggregate gains, we provide a detailed analysis of failure scenarios and edge cases, offering practical insights for practitioners and concrete directions for future work. Our source code and data are publicly available to the research community via the following repository: https://github.com/ungquanghuy-kddi/VLM_GDINO.git

Huy Quang Ung, Guillaume Habault, Roberto Legaspi +3

KDDI Research, Inc., Fujimino, Japan

Disaster Damage Assessment Building Damage Assessment Large Vision-Language Models

Jul 31, 2026cs.CV

Counting the Cost of War Under Satellite Embargo: Zero-Shot Estimation of Impacted Infrastructure

Rapid estimation of impacted structures - critical for conflict-zone humanitarian response - is frequently hindered by post-strike satellite data embargoes and imagery blackouts. We bypass this operational bottleneck by reframing impacted building mapping as a zero-shot geometric projection task on archival, pre-strike maps. Using coordinate and incident text from LiveUAMap and ArcGIS, Large Language Models extract weapon payloads (W) to project kinetic blast perimeters via Hopkinson-Cranz scaling (R_base = Z * W^(1/3)). To count exposed structures within these zones without post-strike imagery, we introduce two technical innovations: Adaptive Field-of-View to eliminate resolution (zoom) bias in 2D segmentation (SAMGeo), and 2.5D pseudo-height depth maps combined with segmentation masks to help Large Vision-Language Models (LVLMs) resolve overlapping, dense rooftops. Evaluated on 2026 Middle East conflict data, depth-augmented LVLMs dramatically outperform traditional segmentation in congested urban centers. This establishes a powerful hybrid paradigm for zero-shot crisis mapping: ultra-fast 2D segmentation for sparse rural zones, and depth-augmented LVLMs for dense urban environments.

Saleh Sakib Ahmed, M. Sohel Rahman

Department of Computer Science and Engineering, Bangladesh University of Engineering and Technology, Palashi, Dhaka, 1000, Bangladesh.

Remote Sensing Image Understanding Vision-Language Models Remote Sensing Image Segmentation Disaster Damage Assessment Object Counting

Jul 30, 2026cs.CV

Large scale cross-regional remote sensing flood monitoring framework for operative mapping and impact analysis

Effective flood monitoring is critical for minimizing the impacts of flood disasters on populations and infrastructure. Yet reliable remote sensing across extensive and environmentally diverse regions remains challenging, as most segmentation algorithms lack the generalisation capacity required for large-scale application, while annotated flood data are scarce and unevenly distributed. This study presents an end-to-end multimodal framework for Russian Federation territories sustainable flood monitoring and damage assessment based on synthetic aperture radar data, multispectral imagery, and digital elevation models with their derivatives, forming a 21-channel input. Using a self-collected multimodal dataset covering seven Russian regions, two strategies for water surface detection under limited data conditions were compared: a supervised U-Net++ model and the self-supervised AnySat architecture pre-trained and fine-tuned for the segmentation task. Under the data conditions of this study, supervised learning proved more effective, while the AnySat-based approach offered greater stability and retains advantages for settings where larger unlabelled data or missing modalities at inference are expected. The best flood area predictions were used to estimate flood impact in urban areas in terms of the area affected, material damage, casualties, and ecological and agricultural impact. The estimations were conducted following the official methodology of the Russian Ministry of Emergency Situations. Applied to the 2019 Tulun flood, the obtained results closely matched official assessments, except for material damage, due to the open-source databases usage. The results demonstrate the potential of deep learning and multimodal satellite data integration for scalable, reliable flood monitoring across diverse environmental and data-limited conditions.

Ilya Novikov, Svetlana Illarionova, Ruslan Dzharkinov +6

Skolkovo Institute of Science and Technology, Moscow, 121205, Russia. · Trofimuk Institute of Petroleum Geology and Geophysics SB RAS, Novosibirsk, 630090, Russia. · King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia. +2

Remote Sensing Image Segmentation Disaster Damage Assessment Flood Inundation Mapping Multimodal Sensor Fusion

Jul 23, 2026cs.CV

Advancing All-Weather Building Damage Mapping to the Instance Level: Outcomes and Insights from the 2026 Bright Challenge

Rapid post-disaster response requires timely, building-level information on whether structures remain intact, are damaged, or are destroyed. Post-event optical imagery, however, may be unavailable because of cloud, smoke, or darkness. The Bright Challenge evaluated all-weather building damage mapping from a submeter-resolution pre-event optical image and a post-event SAR image. Participants were required to detect and delineate each building and assign exactly one of three mutually exclusive damage labels. The challenge extended the globally distributed \textsc{Bright} dataset with instance-level annotations for about 291,000 buildings across 16 disaster events spanning seven disaster types. The final phase was evaluated exclusively on two 2025 events absent from training: a wildfire event in California and a hurricane in Jamaica. A total of 157 participants made 1,289 submissions, and 46 teams entered the final phase. The two winning solutions achieved test mAPs of 0.182 and 0.181, approximately 8.7 times the public baseline of 0.021, but remained far below the best in-domain holdout score of 0.513. Across teams ranked in both phases, performance declined sharply and the rank order changed substantially. The two leading solutions independently favored modality-specific encoding, staged or late optical--SAR fusion, and an optical-dominant separation of building localization from damage recognition. The winning method additionally used scene-aware threshold adjustment and pseudo-label adaptation. These results identify cross-event generalization and stable severity discrimination as the principal remaining challenges. All data, annotations, baseline code, and winning solutions are publicly available at https://github.com/ChenHongruixuan/BRIGHT.

Hongruixuan Chen, He Huang, Haifeng Wang +19

Disaster Damage Assessment Building Damage Assessment Instance Segmentation Cross-Domain Generalization Remote Sensing Benchmarks Multimodal Fusion

Jul 17, 2026cs.LG

DELUGE: Towards Continental-Scale Daily Pluvial Flood Damage Prediction via Interpretable Conditioning on Foundation Model Embeddings

Pluvial (rainfall-driven) flooding accounts for 45% of National Flood Insurance Program (NFIP) claims in the United States and is harder to predict than its riverine and coastal counterparts, with existing approaches limited to coarse resolution, regional domains, or computationally intensive process-based models unsuitable for daily continental-scale use. We present DELUGE, a multimodal deep learning framework for daily pluvial flood damage prediction at ~1 km resolution and national scale, trained on spatially and temporally corrected NFIP claims (2017-2022) and structured around the hazard, exposure, and vulnerability components of disaster risk. Rather than blanket coverage of the Conterminous United States (CONUS), we model the top 100 highest-claim 75 km cells, distributed nationwide and accounting for ~81% of total pluvial flood claims. Our architectural novelty is a pair of parametric modules in the hydrometeorology branch, a Value Modulator and a Temporal Modulator, conditioned on terrain descriptors and AlphaEarth foundation-model embeddings, that expose directly inspectable hydrological response parameters and provide architecture-level interpretability-by-design. Under a spatial block holdout, DELUGE outperforms tuned Random Forest, XGBoost, and LightGBM baselines by 9% to 30% on a dollar-weighted area under the precision-recall curve (PR-AUC), a metric that emphasizes the rare, high-cost claims of greatest operational interest. Beyond DELUGE, we argue this interpretable conditioning scheme is a transferable pattern for integrating foundation-model embeddings into other geospatial prediction tasks.

Yuya Kawakami, Daniel Cayan, Dongyu Liu +2

University of California, Davis Davis, California, USA · Scripps Institution of Oceanography University of California, San Diego La Jolla, California, USA

Disaster Damage Assessment Multimodal Model Interpretability

Jul 13, 2026cs.CV

HASTE: A Platform for Rapid Post-Disaster Building Damage Assessment

When a large disaster strikes, responders need a map of which buildings are damaged within hours. The models that do well on public benchmarks assume matched before-and-after imagery and a training set drawn from similar past events, and neither is usually available for a new disaster in its first day. We present HASTE (High-speed Assessment and Satellite Tracking for Emergencies), a no-code web platform that lets analysts who are not machine learning engineers produce per-building damage maps from post-disaster satellite imagery. HASTE implements two methods that share one interface. The first requires the user to label polygons over the post-disaster scene, trains a small semantic segmentation model on that single scene, runs it over the whole image, and joins the per-pixel output to existing building footprints. The second embeds every footprint with a pretrained vision model, requires the user to label a handful of buildings, and fits a logistic regression in the browser that scores the rest of the scene in seconds. We describe the platform, both methods, and the engineering that supports them. We also report preliminary experiments on xBD showing that foundation-model embeddings pooled over footprints separate damaged from intact buildings using post-disaster imagery alone, matching a fully supervised ResNet-50 baseline with a twentieth of its labels. HASTE and its predecessors have supported more than thirty real-world disaster responses since 2023, spanning earthquakes, hurricanes, cyclones, floods, wildfires, and tornadoes, delivering results to humanitarian partners within hours to days of imagery becoming available. We close with the directions we think are most promising, including vision-language assessment, active learning, and damage models for roads and other infrastructure. HASTE is open source at https://github.com/microsoft/haste.

Caleb Robinson, Anthony Ortiz, Simone Fobi Nsutezo +8

Microsoft AI for Good Research Lab

Remote Sensing Image Segmentation Disaster Damage Assessment Building Damage Assessment

Jun 28, 2026eess.SY

An Integrated Two-Stage Deep-Learning Tool for Rapid Post-Hurricane Damage Identification and Repair Scheduling

Post-hurricane damage assessment and repair scheduling can require computationally intensive simulation and optimization. This paper presents an integrated two-stage deep-learning tool for rapid damaged-line identification and repair-schedule computation. An available offline synthetic dataset for the IEEE 9500-node test feeder contains 1,700 hurricane scenarios with exposure features, grid metadata, fragility parameters, OpenDSS outputs, damaged-line labels, and Adaptive Large Neighborhood Search reference schedules. Stage 1 benchmarks MLP, ResMLP, and GraphSAGE, while Stage 2 compares MLP, DeepSets, and Set Transformer. The selected ResMLP-Set Transformer pipeline propagates Stage 1 errors into Stage 2 and achieves a damaged-job F1-score of 0.920, pairwise order agreement of 0.854, and start- and end-time mean absolute errors of 4.349 min and 4.486 min, respectively. The tool provides rapid initial repair-log decision support for new hurricane cases.

Hooman Torkaman, Ellis Oti Boateng, Jignesh Solanki +1

Lane Department of Computer Science and Electrical Engineering, West Virginia University, Morgantown, WV, USA

Disaster Damage Assessment Power Systems

Jun 20, 2026cs.CV

RAPID: A Reproducible Multi-Agent Pipeline for Interpretable Disaster Damage Assessment from Satellite and Street-View Imagery

Due to the increasing frequency and intensity of extreme climate events, there is a clear demand for intelligent, scalable, and autonomous approaches to disaster damage assessment. Existing methods, largely based on supervised learning and task-specific fine-tuning, struggle to generalize under domain shifts, long-tailed data distributions, and heterogeneous geospatial data sources, especially in disaster scenarios. They also often lack the ability to integrate and reason across multimodal geospatial information, such as satellite images and street-view images. In this paper, we introduce RAPID, a reproducible multi-agent pipeline for interpretable disaster damage assessment, including damage-level assessment, damage-type interpretation, and actionable suggestions for response, remediation, and recovery. RAPID coordinates specialized agents to perform cross-view understanding, image restoration, structured damage recognition, and geographical reasoning across heterogeneous data modalities. Without task-specific fine-tuning, RAPID supports zero-shot damage assessment by jointly using complementary information from remote sensing and ground-level perspectives. The system produces fine-grained, interpretable assessments and automatically generates location-specific, decision-relevant disaster reports to support early-stage emergency response. We evaluate RAPID across hurricanes, floods, wildfires, and earthquakes using multiple cross-view imagery inputs, including pre- and post-disaster street-view images, post-disaster remote sensing imagery, and street-view image pairs. Experiments show that RAPID achieves 0.92 overall accuracy for multi-disaster type classification and up to 0.627 for cross-view damage severity prediction, highlighting its potential as a foundational framework for autonomous disaster intelligence.

Yifan Yang, Wenjing Gong, Kaili Zhang +5

Texas A&M University College Station, Texas, USA · National University of Singapore Singapore, Singapore · The University of Alabama Tuscaloosa, Alabama, USA

Remote Sensing Image Understanding Disaster Damage Assessment Disaster Response Multimodal Agents

Jun 15, 2026cs.CV

GeoDisaster: Benchmarking Orchestrated Agents for Operational Disaster Geo-Intelligence

Remote-sensing vision-language models (RS-VLMs) have advanced Earth-observation analysis toward visual interpretation and instruction-following, yet fall short of operational geo-intelligence, which demands tool-grounded spatial reasoning and structured, evidence-backed decisions. We introduce GeoDisaster, an operational geospatial disaster reasoning benchmark with 2,921 verified instances across 43 question types and five task families: deforestation monitoring, multi-hazard analysis, building-damage assessment, flood-safe routing, and Sentinel-1 SAR flood monitoring. Instances integrate heterogeneous EO/GIS evidence-optical and SAR imagery, raster masks, vector geometries, road networks, and exposure layers-spanning hazard detection, damage assessment, exposure estimation, and diagnostic report generation. Ground-truth answers are grounded in executable geospatial workflows and deterministic consistency checks, removing the need for language-model annotation. We further propose an orchestrated multi-agent framework with 18 disaster-oriented tools, where role-specialized agents coordinate through explicit execution contracts, aligned via Role-Contract Expectation Alignment (RCEA): failure-aware supervised fine-tuning combined with contract-grounded reinforcement learning over dense step-level signals. Experiments show that GeoDisaster challenges existing RS-VLMs and agentic systems, while RCEA improves tool use, evidence grounding, state consistency, and decision generation.

Maram Hasan, Aman Verma, Savitra Roy +5

Indian Institute of Technology Bombay · Mohamed bin Zayed University of Artificial Intelligence

Disaster Damage Assessment RL for Language Model Reasoning LLM Agent Orchestration Geospatial Reasoning Tool-Using Vision-Language Agents Remote Sensing Benchmarks+1

Jun 12, 2026cs.CV

Multi-Modal Attention for Automated Disaster Damage Assessment Using Remote Sensing Imagery and Deep Learning

Timely and accurate disaster damage assessment is crucial for effective emergency response, resource allocation, and recovery. Traditional methods, which often rely on manual inspections or sparse data, are typically slow and error-prone. This paper introduces a novel framework leveraging remote sensing imagery and deep learning to automate building damage classification. Using pre- and post-disaster satellite imagery, our model categorizes buildings into four damage levels: no damage, minor damage, major damage, and destroyed. The core innovation is a multi-modal attention mechanism that fuses bi-temporal features to explicitly detect and assess structural changes. We employ a lightweight ConvNeXT-Tiny backbone to ensure efficient processing without compromising performance. Key contributions include: (1) a cross-attention module for multi-modal data fusion, (2) an optimized preprocessing pipeline for large-scale datasets, and (3) robust data augmentation techniques. Experiments on a large-scale disaster dataset demonstrate an overall classification accuracy of 94.90%. The model effectively discriminates between damage categories and remains resilient to incomplete data. This system significantly improves assessment speed and accuracy, aiding emergency responders in prioritizing interventions. This work advances automated disaster damage detection by integrating multi-temporal imagery with deep learning, offering a scalable solution for real-time response.

Tewodros Syum Gebre, Jagrati Talreja, Leila Hashemi-Beni

Built Environment Department, College of Science and Technology, North Carolina A&T State University, Greensboro, NC, USA · United Nations University Institute for Water, Environment and Health, Richmond Hill, ON, Canada

Disaster Damage Assessment Remote Sensing Change Detection Multimodal Classification

Jun 10, 2026cs.CV

Damage-TriageFormer: A Foundation-Model Framework for Typology-Based Building Damage Assessment from Mono-Temporal Imagery

Decision-relevant building damage assessment is critical for prioritizing resources and recovery after a disaster, yet most automated methods either flatten damage into a single severity scale (no damage, minor, major, destroyed) or require paired pre- and post-event imagery that is often unavailable for emerging hazards. This paper presents Damage-TriageFormer, a single-image, post-event, footprint-conditioned model that produces a damage typology rather than a severity scale. We contribute: (1) DamageTriage-Bench, a new benchmark built from NOAA Emergency Response Imagery across Hurricane Michael (2018), Hurricane Helene (2024), and the 2025 Los Angeles wildfire complex, with five typology classes that distinguish roof damage from structural damage and, within each, partial from total extent; and (2) Damage-TriageFormer, which extends a DINOv3 ViT-L backbone with a Simple Feature Pyramid for higher-resolution instance pooling, a two-stage gated damage head, and an auxiliary severity-regression objective. Our model achieves macro F1 of 0.624 on validation and 0.619 on a held-out stratified test set, performing strongest where operational triage needs it most, with per-class F1 of 0.91 and 0.84 on undamaged buildings and total structural collapse, respectively. While the rare Total Roof Damage class remains difficult due to its limited examples and an inherently ambiguous label boundary, our results show that single-image post-event imagery can support actionable building damage typing, enabling targeted emergency response and resource allocation without a pre-event reference.

Yiming Xiao, Yu-Hsuan Ho, Sanjay Thasma +2

Texas A&M University · Resilitix Intelligence LLC · Institute for a Disaster Resilient Texas

Remote Sensing Image Understanding Disaster Damage Assessment Building Damage Assessment Disaster Response

Jun 9, 2026cs.CV

Building Change Detection in Earthquake: A Multi-Scale Interaction Network and A Change Detection Dataset

As one of the most destructive natural disasters, earthquakes have struck many countries around the world in recent years, causing serious economic losses. Change detection (CD) can be applied to post-earthquake damage assessment as it can infer destroyed change regions from multi-temporal remote sensing images. Furthermore, the CD with short imaging interval will better satisfy the needs of the emergency rescues after earthquakes. However, the capability of current methods built on deep neural networks is limited because the dataset with short imaging interval is absent. To meet post-disaster immediate relief, we create a CD dataset, Turkey earthquake CD dataset (TUE-CD), for the evaluation of building damage in the short term after an earthquake. Because of the short acquisition interval of the post-event images, the imaging angle is different for different temporal images, which leads to some side-looking problems. To deal with these challenges, we present a multi-scale feature interaction network (MSI-Net) for efficient interaction between bi-temporal features, as well as mitigating the effect of side-looking problems. Specifically, the proposed MSI-Net consists of joint cross-attention (JCA) modules, multi-scale offset calibration (MOC) modules, and feature integration (FeI) modules. The JCA module unifies channel cross-attention and spatial joint attention for sufficient feature interaction. The MOC module further estimates the offsets to align the bi-temporal image with the multi-scale features. Finally, calibrated features and multi-scale features are fused by FeI modules for the prediction of changed areas. Experiments on the WHU-CD, CLCD, and the constructed TUE-CD dataset indicate that the proposed MSI-Net provides better results than considered state-of-the-art CD methods.

Yunlong Liu, Zekai Zhang

School of Control Science and Engineering, Shandong University, Ji’nan 250061, China

Disaster Damage Assessment Building Damage Assessment Remote Sensing Change Detection Multi-Scale Feature Fusion Remote Sensing

May 28, 2026cs.CV

Optimizing Latent Representations for Robust Building Damage Assessment Onboard Earth Observation Satellites

Rapid identification of damaged buildings after natural disasters or on war areas is crucial to support emergency response and prioritize interventions. Earth Observation constellations provide timely, large-scale coverage, but actionable information is often delayed by data downlink constraints, on-ground processing, and human interpretation. Reducing this latency is essential to improve decision-making responsiveness. In this work, we propose an original AI-based system that enables object-level building damage assessment (localization and damage classification) directly onboard satellites from pre-disaster and post-disaster highresolution optical imagery. Available pre-disaster images are encoded on ground into compact latent representations, transmitted to the satellite, and compared on-board with newly acquired post-event observations. Leveraging AI interpretation capabilities and increasing processing capabilities on-board satellites, the proposed design enables processing directly at the data source, reducing the amount of information to be downlinked while preserving task-relevant content and improving overall system responsivity. We explore the design space through a systematic benchmark of onboard-compatible variants, analyzing the impact of siamese processing, cross-attention, latent-space compression, and robustness-oriented data augmentation. Experiments on xBD dataset demonstrate reliable and robust damage assessment under misalignment, with minimal performance degradation under strong compression.

Thomas Goudemant, Benjamin Francesconi

Institut de Recherche Technologique Saint Exup´ery

Disaster Damage Assessment Building Damage Assessment Edge Inference Remote Sensing Change Detection

May 23, 2026cs.CV

Benchmarking Composed Image Retrieval for Applied Earth Observation

Remote sensing composed image retrieval (RSCIR) enables search in large satellite image archives using composed queries that combine a reference image with a textual modifier. Although RSCIR offers a flexible interface for expressing targeted retrieval intent, the transferability of modern composition methods to Earth observation (EO) imagery and their relevance to operational EO workflows remain underexplored. We address this gap through a unified benchmark and an application-oriented study. First, we systematically adapt and evaluate representative composed image retrieval methods with six vision-language backbones on PatternCom under a standardized protocol, analyzing their behavior across backbones, composition strategies, and query types. Second, we introduce xView2-CIR, a change-centric dataset for disaster and damage monitoring, where retrieval is conditioned on scene identity and a target post-event state. Our results show that training-free composition methods provide strong and scalable baselines for EO retrieval, while change-centric retrieval presents different challenges from attribute-based retrieval, particularly due to the need to preserve scene identity. Overall, this study establishes a practical benchmark for RSCIR and positions composed retrieval as a complementary tool for remote sensing image retrieval, archive exploration, and change analysis. The dataset and code are available at https://github.com/billpsomas/rscir.

Bill Psomas, Dionysis Christopoulos, Thanasis Petropoulos +6

Visual Recognition Group, Department of Cybernetics, Czech Technical University in Prague, Czechia · Remote Sensing Laboratory, School of Rural, Surveying and Geoinformatics Engineering, National Technical University of Athens, Greece · Institute of Informatics & Telecommunications, National Centre for Scientific Research “Demokritos”, Greece +1

Disaster Damage Assessment Remote Sensing Remote Sensing Benchmarks Image Retrieval Composed Image Retrieval

May 16, 2026cs.LG

OPTNet: Ordering Point Transformer Network for Post-disaster 3D Semantic Segmentation

Post-disaster damage assessment requires rapid and accurate semantic segmentation of 3D point clouds to identify critical infrastructure such as damaged buildings and roads. Early Point Transformers (e.g., PTv1, PTv2) relied on computationally expensive neighbor searching (k-NN) and Farthest Point Sampling (FPS). To improve efficiency, recent architectures like Point Transformer V3 (PTv3) adopted static serialization methods, such as Hilbert curves or Z-order, to organize unstructured points for window-based attention. However, these fixed orderings are not optimal for capturing the complex geometry of disaster scenes. In this paper, we propose OPTNet (Ordering Point Transformer Network), which introduces a learnable Point Sorter module. OPTNet utilizes a self-supervised ordering loss to dynamically predict an optimal permutation that maximizes the locality of the attention mechanism. We evaluate our method on the 3DAeroRelief dataset, significantly outperforming state-of-the-art baselines.

Nhut Le, Ehsan Karimi, Maryam Rahnemoonfar

Computer Science and Engineering, Lehigh University, Bethlehem PA 18015, US · Civil and Environmental Engineering, Lehigh University, Bethlehem PA 18015, US

Disaster Damage Assessment Transformer Point Cloud Learning 3D Semantic Segmentation

May 12, 2026cs.CV

Instruct-ICL: Instruction-Guided In-Context Learning for Post-Disaster Damage Assessment

Rapid and accurate situational awareness is essential for effective response during natural disasters, where delays in analysis can significantly hinder decision-making. Training task-specific models for post-disaster assessment is often time-consuming and computationally expensive, making such approaches impractical in time-critical scenarios. Consequently, pretrained multimodal large language models (MLLMs) have emerged as a promising alternative for post-disaster visual question answering (VQA), a task that aims to answer structured questions about visual scenes by jointly reasoning over images and text. While these models demonstrate strong multimodal reasoning capabilities, their responses can be sensitive to prompt formulation, which can limit their reliability in real-world disaster assessment scenarios. In this paper, we investigate whether structured reasoning strategies can improve the reliability of pretrained MLLMs for post-disaster VQA. Specifically, we explore multiple prompting paradigms in which one MLLM is used to generate task-specific instructions that serve as Chain-of-Thought (CoT) guidance for a second MLLM. These instructions are incorporated during answer generation with varying degrees of in-context learning (ICL), enabling the model to leverage both explicit reasoning guidance and contextual examples. We conduct our evaluation on the FloodNet dataset and compare these approaches against a zero-shot baseline. Our results demonstrate that integrating instruction-driven CoT reasoning consistently improves answer accuracy.

Armin Zarbaft, Ehsan Karimi, Nhut Le +1

Lehigh Uniersity Pennsylvania, USA

Disaster Damage Assessment LLM Prompting Multimodal QA Disaster Response In-Context Learning VLM Reasoning

May 11, 2026cs.CV

DA-SegFormer: Damage-Aware Semantic Segmentation for Fine-Grained Disaster Assessment

Rapid and accurate damage assessment following natural disasters is critical for effective emergency response. However, identifying fine-grained damage levels (e.g., distinguishing minor from major roof damage) in UAV imagery remains challenging due to the degradation of texture cues during resizing and extreme class imbalance. We propose DA-SegFormer, a damage-aware adaptation of the SegFormer architecture optimized for high-resolution disaster imagery. Our method introduces a Class-Aware Sampling strategy to guarantee exposure to rare damage features, and it integrates Online Hard Example Mining (OHEM) with Dice Loss to dynamically focus on underrepresented classes. In addition, we employ a resolution-preserving inference protocol that maintains native texture details. Evaluated on the RescueNet dataset, DA-SegFormer achieves 74.61% mIoU, outperforming the baseline by 2.55%. Notably, our improvements yield double-digit gains in critical damage classes: Minor Damage (+11.7%) and Major Damage (+21.3%).

Kevin Zhu, William Tang, Raphael Hay Tene +3

Bina Labs, Lehigh University

Class-Imbalanced Learning Image Segmentation Remote Sensing Image Segmentation Disaster Damage Assessment Building Damage Assessment Disaster Response+1

Apr 24, 2026cs.CV

ChangeQuery: Advancing Remote Sensing Change Analysis for Natural and Human-Induced Disasters from Visual Detection to Semantic Understanding

Rapid situational awareness is critical in post-disaster response. While remote sensing damage assessment is evolving from pixel-level change detection to high-level semantic analysis, existing vision-language methodologies still struggle to provide actionable intelligence for complex strategic queries. They remain severely constrained by unimodal optical dependence, a prevailing bias towards natural disasters, and a fundamental lack of grounded interactivity. To address these limitations, we present ChangeQuery, a unified multimodal framework designed for comprehensive, all-weather disaster situation awareness. To overcome modality constraints and scenario biases, we construct the Disaster-Induced Change Query (DICQ) dataset, a large-scale benchmark coupling pre-event optical semantics with post-event SAR structural features across a balanced distribution of natural catastrophes and armed conflicts. Furthermore, to provide the high-quality supervision required for interactive reasoning, we propose a novel Automated Semantic Annotation Pipeline. Adhering to a ``statistics-first, generation-later'' paradigm, this engine automatically transforms raw segmentation masks into grounded, hierarchical instruction sets, effectively equipping the model with fine-grained spatial and quantitative awareness. Trained on this structured data, the ChangeQuery architecture operates as an interactive disaster analyst. It supports multi-task reasoning driven by diverse user queries, delivering precise damage quantification, region-specific descriptions, and holistic post-disaster summaries. Extensive experiments demonstrate that ChangeQuery establishes a new state-of-the-art, providing a robust and interpretable solution for complex disaster monitoring. The code is available at https://sundongwei.github.io/changequery/.

Dongwei Sun, Jing Yao, Kan Wei +6

School of Computer Science and Technology and the Ministry of Education Key Lab for Intelligent Networks and Network Security, Xi’an Jiaotong University, Xi’an 710049, China · State Key Laboratory of Remote Sensing and Digital Earth, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, 100094, China · State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, China +4

Remote Sensing Image Understanding Disaster Damage Assessment Remote Sensing Change Detection Multimodal QA Disaster Response Semantic Change Detection

Mar 16, 2026cs.CV

DamageArbiter: A Multimodal Arbitration Framework for Disaster Damage Assessment from Street-View Imagery

Analyzing street-view imagery with computer vision models offers a promising approach for rapid, hyperlocal disaster damage assessment, but existing approaches typically rely on black-box pre-trained vision models, which lack interpretability and reliability. This study proposes DamageArbiter, a multimodal disagreement-driven arbitration framework designed to improve the accuracy and reliability of street-view-based damage assessment. DamageArbiter leverages the complementary strengths of unimodal and multimodal models and employs a lightweight logistic regression meta-classifier to arbitrate cases in which model predictions disagree. Using 2,556 post-disaster street-view images, paired with manually generated or large language model (LLM)-generated text descriptions, we systematically compared DamageArbiter with fine-tuned unimodal (image-only and text-only) models and CLIP-based multimodal models in terms of classification performance and overconfidence errors. Results show that DamageArbiter improved accuracy to 75.85% and the Matthews correlation coefficient (MCC) to 0.6188, compared with the best-performing text-only baseline (63.07% accuracy, 0.4126 MCC), image-only baseline (74.33% accuracy, 0.5947 MCC), and CLIP baseline (74.22% accuracy, 0.5915 MCC). The overconfidence analysis further reveals that DamageArbiter substantially reduced the overconfidence error from 70.58% for the best-performing baseline, the image-only ViT model, to 16.45%. Overall, this study demonstrates that accuracy alone is insufficient for evaluating disaster damage classification models and highlights the importance of measuring overconfidence errors as part of model reliability assessment. DamageArbiter thus offers a more reliable framework for rapid, hyperlocal disaster damage assessment from street-view imagery.

Yifan Yang, Lei Zou, Wenjing Gong +6

Department of Geography, Texas A&M University, College Station, USA · Department of Landscape Architecture & Urban Planning, Texas A&M University, College Station, USA · Department of Industrial and Systems Engineering, University of Florida, Gainesville, USA +2

Disaster Damage Assessment Multimodal Classification Multimodal Model Evaluation

Jan 26, 2026cs.CV

DisasterInsight: A Building-Centric Benchmark for Evaluating Vision--Language Models in Disaster Response

Vision--language models (VLMs) show promise for disaster-response remote sensing, but existing benchmarks mainly emphasize scene-level or damage-centric assessment. To study this building-centric gap, we introduce \method{}, a diagnostic benchmark built on xBD, a pre/post-disaster satellite dataset with building-level damage labels. \method{} enriches building instances with OpenStreetMap-derived functional labels and contains 134{,}108 task-specific instruction records across 15 task types, spanning instance-level assessment, scene-level counting, multi-instance reasoning, and structured report generation. The benchmark supports RGB pre/post-disaster imagery, single- and multi-view instance formulations, and scene-level RGB/SAR diagnostic inputs. Experiments with general-domain and remote-sensing VLMs show that models perform better on visible damage cues than on building-function understanding, multi-instance reasoning, counting, and grounded reporting. Instruction tuning improves performance on several tasks but does not close this building-centric gap.

Sara Tehrani, Yonghao Xu, Leif Haglund +3

Computer Vision and Learning System, Linköping University, Sweden · Vantor, Linköping, Sweden

VLM Evaluation Remote Sensing Image Understanding Disaster Damage Assessment Building Damage Assessment Disaster Response Remote Sensing Benchmarks