Large Language Model Quantization

Post-training quantization (PTQ) is one of the most practical ways to reduce the serving cost of Large Language Models (LLMs), but activation quantization remains difficult because outlier-dominated channels lead to large quantization errors. This paper investigates whether part of this degradation is caused by over-migration in scaling-based equivalent transformations. We introduce a quantile-robust scaling policy for SmoothRot-style transforms by replacing max-based activation statistics with high quantiles, and we complement it with constrained gradient-based optimization of channel scales. On LLaMA-3.2-1B under W4A4 quantization, quantile-only policy search improves selected-layer error by 11.1% over the SmoothRot baseline, joint (alpha, q) search improves it by 12%, and training reaches 18.5%. Replaying the best selected-layer policy on all decoder-block down-projection layers reduces the corresponding full-layer mean error from 97.51 to 78.08 (19.9%). The results show that robust migration control and lightweight scale learning provide consistent gains over max-based fixed policies while preserving the equivalent-transform framework.

Low-bit quantization has been widely adopted to accelerate the inference of large language models (LLMs) by significantly reducing computational cost and memory usage. However, activation outliers pose a major challenge to effective quantization, often leading to notable performance degradation. In this paper, we introduce OffQ, a method designed to mitigate activation outliers in low-bit quantization through a novel offsetting mechanism. Specifically, OffQ first identifies a low-dimensional outlier subspace in the activations using a proposed top-1 PCA, and then concentrates high-magnitude activations into 1 channel via rotation. OffQ then absorbs this concentrated outlier channel by converting its magnitude into a shared offset, thereby reducing the standard deviation of the activations. This offsetting strategy enables effective W4A4KV4 quantization of LLMs using deployment-friendly uniform-grid and uniform-precision quantization. Extensive experiments across diverse LLM architectures and benchmarks demonstrate that OffQ outperforms state-of-the-art baselines, consistently improving model accuracy while preserving low-bit efficiency.

Efficient large language model (LLM) serving is increasingly constrained by deployment cost. Quantization is a key technique for reducing serving cost, yet even state-of-the-art 4-bit quantizers exhibit a noticeable quality gap from FP16, particularly for smaller models where low-bit serving is most beneficial. We identify a fundamental cause of this gap: quantization error is highly input-dependent and varies substantially across tokens, while existing post-quantization compensation methods are static and apply identical corrections to all inputs. As a result, easy tokens are over-corrected while hard tokens remain under-corrected. We present SPEAR, a system for post-quantization error-adaptive recovery that improves low-bit LLM serving. SPEAR introduces lightweight Error Compensators (ECs) modulated by per-token gates and places them only at the most error-sensitive layers identified through a CKA-guided entropy-aware diagnostic. This focuses a small parameter budget where it is most effective. Efficient deployment of ECs presents several systems challenges, including additional computation, tensor-parallel synchronization caused by input-dependent gating, and latency instability across configurations. SPEAR addresses these issues through adaptive kernel-fusion dispatch, combining an epilogue-integrated peer-reduction kernel with P2P dual-write to fuse the post-EC computation into low-bit GEMMs, and an SLO-constrained EC-aware scheduler for predictable serving performance. Across challenging per-channel quantization settings, SPEAR recovers 56-75% of the perplexity gap between W4 and FP16 while adding less than 1% model memory overhead and maintaining latency comparable to a widely used 4-bit serving deployment.

Demand for low-precision inference, including NVFP4-based approaches, has grown as large language models are increasingly deployed in latency and cost constrained production environments. Quantization-aware distillation (QAD) helps recover accuracy lost under low bit quantization by training a quantized student to match the output distribution of a frozen higher precision teacher via a KL-divergence loss. In this work, we first provide a representation level diagnosis of QAD: output matching alone can mask internal degradation, because many intermediate activation geometries can yield similar teacher-aligned logits. Using CKA, we show that KL-only QAD can reduce layerwise representational similarity relative to the BF16 teacher, with especially severe drift in RL-post-trained models. This drift correlates with downstream bottlenecks on reasoning and coding tasks, suggesting that low bit recovery requires preserving internal geometry rather than matching outputs alone. Motivated by this finding, we propose \textbf{CKA-QAD}, a CKA-guided representational alignment method for NVFP4 QAD and low bit LLM accuracy recovery. The method adds a lightweight regularizer that preserves internal representational geometry during distillation by aligning layerwise Gram matrices through CKA. Across Nemotron 3 Nano and Qwen3-4B-Thinking-2507, CKA-QAD substantially improves representational alignment and improves downstream reasoning and coding accuracy with modest training overhead. Our findings position CKA-guided representational alignment as a practical complement to output matching for quantized LLM recovery.

Post-training quantization (PTQ) is critical for the efficient deployment of large language models (LLMs). Recent ultra-low-bit PTQ methods rely on rigid weight-saliency assumptions or position heuristics, introducing substantial hidden scaling overhead. We propose SAGE-PTQ (Saliency-Aware Graph-guided Efficient PTQ), a novel ultra-low-bit quantization framework for LLMs that minimizes hidden scaling cost. SAGE-PTQ separates salient and unsalient weights using distributional statistics, then models subsampled unsalient weights as a sparse graph to estimate the optimal number of groups per layer. SAGE-PTQ applies dual-mode quantization, assigning multi-bit precision to salient weights and binarizing unsalient weights. To reduce scaling overhead, SAGE-PTQ uses one per-channel scale for salient weights and one scalar per unsalient group. Finally, SAGE-PTQ implements adaptive saliency thresholding to select the optimal saliency ratio per matrix. SAGE-PTQ achieves 1.03 weight bits and only 0.004 scaling bits per matrix on average, outperforming state-of-the-art methods such as BiLLM and PB-LLM. On LLaMA-3-8B, SAGE-PTQ achieves 6.74 WikiText2 perplexity, compared to 55.8 for BiLLM, while using less than 50% of BiLLM's GPU memory. On LLaMA-2-70B, SAGE-PTQ provides 1.5x faster decoding on one NVIDIA L40 GPU, demonstrating practical inference efficiency.

Diffusion large language models (DLLMs) have recently emerged as a promising alternative to autoregressive LLMs by generating text through iterative masked denoising with bidirectional context. However, their large model sizes and iterative denoising process introduce substantial memory and computational overhead, motivating post-training quantization for efficient deployment. In this paper, we identify two key challenges for low-bit DLLM quantization: state-dependent activation disparity and temporal error accumulation. Masked and unmasked tokens exhibit different activation distributions within each denoising step, while quantization errors can accumulate across steps during iterative decoding. To address these challenges, we propose STaR-Quant, a state-time consistent PTQ framework for DLLMs. STaR-Quant introduces State-Guided Activation Transformation (SGAT) to assign masked and unmasked tokens to different activation transformation spaces with a unified static weight-side transformation. It further introduces Temporal Attention Compensation (TAC) to correct the quantized attention representation via a lightweight block-diagonal affine mapping. Experiments on representative DLLMs demonstrate that STaR-Quant consistently improves low-bit weight-activation quantization over strong PTQ baselines, while delivering up to 1.69x speedup and 3.14x memory saving over FP16 deployment.

LLMs have become the state-of-the-art algorithms for solving NLP tasks. However, they typically come at huge computational and memory costs, thus making them difficult to deploy on embedded systems. Toward this, state-of-the-art methods typically employ uniform post-training quantization (PTQ) across attention blocks of the network, hence overlooking the potential of applying different quantization levels in the same network. They also employ complex operations to mitigate the negative impact of activation outliers, hence incurring high computational overheads. Moreover, they have not considered evaluation using emerging LLMs with non-conventional attention architectures (e.g., state-space models), which pose different challenges in applying quantization. To address these limitations, we propose QuBLAST, a novel PTQ methodology that employs block-level compression approach with activation scaling strategy for LLMs. Block-level compression approach enables mixed-precision quantization across blocks of the network, while activation scaling strategy efficiently mitigates the negative impact of activation outliers. Specifically, QuBLAST first analyzes the sensitivity of different attention blocks in the pre-trained model through the cross-entropy loss analysis. QuBLAST leverages this sensitivity analysis to determine the weight quantization level for each attention block in the model. Furthermore, QuBLAST employs the activation scaling map for each block to control the range of activation values and mitigate the negative impact of activation outliers, thereby enabling better quantization results. Experimental results show that, QuBLAST reduces model sizes by 40%-45.2% across different model architectures (i.e., Qwen3-8B, Llama3-8B, Mistral v0.1-8B, and Falcon H1R-7B), while maintaining the performance within 5% perplexity increase for the WikiText-2 and WikiText-103 datasets.

Aggressive weight quantization to 2-bit precision offers substantial throughput and memory gains for large language model (LLM) inference, but typically incurs severe accuracy degradation. These gains are particularly relevant for edge and on-device deployment, where memory capacity and bandwidth are primary constraints. In this work, we extend Recover-LoRA -- a lightweight, data-free accuracy recovery method originally developed for general model weight corruption -- to the setting of ultra-low-bit quantization. We propose a selective mixed-precision strategy in which only gate and up projection layers of the MLP are quantized to 2-bit (W2), while all other linear layers remain at higher precision, yielding a mixed-precision GateUp configuration. We demonstrate via roofline analysis across three model families (4B--20B) and two hardware platforms that a W4/W2-GateUp deployment (4-bit base with 2-bit gate/up) delivers 7.5--23.3% TPS improvement over uniform W4 depending on model and context length, while confining quantization error to a predictable subset of layers. We then apply Recover-LoRA -- training low-rank adapters on the quantized layers via logit distillation with synthetic data -- to recover accuracy lost from 2-bit quantization of the gate and up layers. In a case study on Qwen3-4B, Recover-LoRA achieves 80--95% accuracy recovery on 9 of 12 benchmarks, using only 10k synthetic training samples and no labeled data. We further demonstrate that synthetic data performs comparably to curated labeled data for distillation-based recovery, and that recovery generalizes to out-of-distribution evaluation tasks. Our results present Recover-LoRA as a practical post-quantization accuracy recovery tool for aggressive weight compression in deployment settings.

Existing quantization methods are fundamentally limited by rigid, integer-based bit-widths (e.g., 2, 3-bit), resulting in a deployment gap" where Large Language Models cannot be optimally fitted to specific memory budgets. To bridge this gap, we introduce LiftQuant, a novel framework that enables continuous bit-width control for true Pareto-optimal deployment. The core innovation is a lift-then-project" mechanism which approximates low-dimensional weight vectors by projecting a simple 1-bit lattice from a higher-dimensional ``lifted" space. Crucially, the effective bit-width is determined simply by the ratio of the lifted dimension to the original dimension, which allows the bit-width to be tuned quasi-continuous as the dimension is a flexible structural parameter. This projection generates a structured yet non-uniform codebook, capturing the expressive power of Vector Quantization (VQ). While beneficial over VQ, LiftQuant's decoding path relies solely on linear transformations and 1-bit uniform quantizers, retaining hardware-friendly nature. This flexibility is transformative: LiftQuant enables a 70B LLM to be compressed to 2.4 bits to precisely fit a 24GB GPU, where its performance significantly surpasses state-of-the-art 2-bit models fitted on the same device. Our code and ckpt is available at https://github.com/Heliulu/LiftQuant.

Massive activation spikes in Large Language Models (LLMs) severely degrade quantization by stretching dynamic ranges. While prior hypotheses characterize these as high-level scalar biases, we argue that they are merely the scalar intermediates of rigid, structural vector biases in the spike-carrying tokens. We show that these tokens converge to constant vectors after normalization that drive the attention sink and value-state drain mechanisms. We geometrically substantiate this by analyzing the coordination of projection weights: $W_K$ contrastively amplifies the vector, $W_Q$ aligns semantic tokens toward it, and $W_V$ projects it into the spectral null-space. Furthermore, we reveal that the model actively preserves these structural biases against Rotary Positional Embedding (RoPE) perturbations by localizing them in "zones of rotational stability" utilizing low-frequency bands and coherent channel pairs. Leveraging this, we propose INSERTQUANT, a post-training quantization (PTQ) framework that clamps spikes and restores their function via pre-computed template vectors. This renders activations strictly spike-free, enabling robust low-bit quantization with high fidelity. INSERTQUANT achieves parity with state-of-the-art per-tensor quantization methods on LLMs and uniquely generalizes beyond text to other modalities such as ViTs.

Large Reasoning Models (LRMs) rely on long reasoning traces, making inference expensive. While low-bit quantization reduces per-token decoding cost, we show that aggressive 2-bit inference can fail to deliver end-to-end speedup because instability in the generation process inflates total token count. Instead of merely lowering answer accuracy, 2-bit quantization often produces much longer traces with repetitive loops, budget exhaustion, delayed commitment, and unclosed reasoning segments. We analyze full reasoning traces of Qwen3 reasoning models across mathematical and commonsense benchmarks and show that accuracy degradation is tightly linked to these process-level failures. To address them, we introduce two lightweight controls: FP16 planning, which gives the 2-bit model a short high-precision outline, and loop rescue, which detects repetitive traces and either commits to an earlier answer or falls back to FP16. On MATH-500, loop rescue improves Qwen3-8B accuracy from 17.2% to 74.2%, while planning plus loop rescue improves Qwen3-32B from 65.0% to 87.2%. Overall, our results show that extreme low-bit reasoning becomes practical when its failures are treated as controllable generation pathologies: with lightweight detection and selective FP16 support, 2-bit inference can recover accuracy while preserving real end-to-end speed. Our code is available at: https://github.com/brain-lab-research/quantized-reasoning.

Post-Training Quantization (PTQ) and Low-Rank Adaptation (LoRA) constitute the standard pipeline for efficient Large Language Model (LLM) deployment. However, applying them sequentially poses a problem: PTQ often leaves behind random noise that is spread out (across the model's weights) in a way LoRA can't easily fix, meaning that LoRA ends up wasting its limited capacity trying to fix uncorrectable noise instead of improving task performance. In this paper, we propose \textbf{ProjQ}, a novel framework for constraining quantization noise to the low-rank manifold via orthogonal subspace projection. We derive an efficient alternating algorithm that shapes the quantization noise into a low-rank structure, effectively offloading dominant error components to the subsequent adapter while minimizing the residual error in the orthogonal "uncorrectable" subspace. Our theoretical analysis demonstrates that ProjQ preserves strictly greater model plasticity for downstream tasks compared to standard PTQ. Extensive experiments on LLaMA-2, Qwen2.5 and Qwen3 confirm that ProjQ consistently outperforms existing methods in both quantization error compensation and downstream task fine-tuning, achieving up to $2\times$ lower evaluation loss for compensation and matching the performance of standard 4-bit baselines on language modeling tasks with only 3 bits. The code is available on https://github.com/yy9301/ProjQ .

We investigate whether open-source LLMs encode a linearly separable truthfulness signal in their hidden states, and at which network depth this signal is strongest. Across three $7$B--$8$B instruction-tuned models (Llama-3.1-8B, Mistral-7B, Qwen2.5-7B) loaded in $4$-bit NF4 quantization, we extract per-layer hidden states on four hallucination benchmarks (TruthfulQA, HaluEval-QA, FEVER, and a controlled synthetic set) and compare four detection approaches: linear and MLP probes, INSIDE EigenScore, self-consistency, and attention entropy. A linear probe on a single mid-network layer achieves $0.904$--$1.000$ AUROC on held-out splits, while sampling-based detectors do not exceed $0.541$ AUROC under the same protocol. The truthfulness signal is approximately linear: MLP probes rarely surpass linear probes by more than $0.01$ AUROC. Peak probing layers fall in a consistent band across model families on natural-language benchmarks -- blocks~$13$--$18$ of~$32$ for Llama and Mistral, and blocks~$19$--$25$ of~$28$ for Qwen. First-block attention entropy provides a complementary signal in knowledge-grounded settings ($0.866$--$0.941$ AUROC on HaluEval-QA) at no additional inference cost. The low discriminability of sampling methods under this protocol reflects a structural mismatch between paired-label evaluation and the information these methods access, rather than an inherent limitation of those methods. Code and data are released for full reproducibility on a single $8$,GB GPU.

Post-training quantization (PTQ) is widely used to deploy large language models efficiently, but its effect on reasoning models is not well understood. Across math, coding, and science QA, we find that aggressive PTQ reduces accuracy while increasing chain-of-thought (CoT) length. Surprisingly, we show that in up to 52% of the quantized models' failures, models reach the right answer in intermediate reasoning steps but do not output it as a final answer. To understand why quantization leads to this increase in overthinking errors, we measure the token-level KL divergence between quantized and full-precision output distributions. Positions with high KL divergence correlate strongly with high next-token entropy, and at these positions quantized models disproportionately sample overthinking markers such as "wait", "but", and "alternatively". We show that simply introducing a training-free logit penalty on a curated set of overthinking markers can reduce CoT length by 12--23% while preserving or improving accuracy across 5 models (1.5B-32B parameters), 3 quantization methods, and 5 benchmarks, yielding a favorable Pareto frontier of accuracy against reasoning cost compared to penalizing other token sets. Overthinking errors produced by quantized models are particularly reduced by up to 58%.

Large Language Models exhibit paradoxical fragility in fundamental arithmetic, implying a disconnect between internal computation and discrete output. By analyzing the residual stream geometry during multi-operand addition, we identify the Iso-Raw-Sum Trajectory (IRST), a geometric structure where representations are anchored by semantic digits and modulated by continuous carry fibers. We propose the Noisy Quantization Model to explain this geometry, framing arithmetic errors as Geometric Slippages caused by internal neural noise pushing a continuous, latent Carry Potential across quantization thresholds. This geometric framework further elucidates Probe Versatility, explaining how lightweight probes can disentangle coexisting latent signals (such as ground truth versus hallucination) from a single activation vector. Finally, we validate these insights through a geometric consistency check method that effectively detects and corrects these quantization failures during inference. Our code is available at https://github.com/RL-MIND/Shape-of-Addition.

Post-training quantization (PTQ) is essential for deploying LLMs under memory and bandwidth constraints. However, extreme low-bit quantization remains highly sensitive to activation outliers and anisotropic weight curvature. Existing incoherence-based PTQ methods mitigate this issue with fixed randomized Hadamard transforms (RHTs), which improve quantization robustness but cannot adapt the rotated basis to the layer, calibration distribution, or quantizer. We introduce HARP (Hadamard-preconditioned Adaptive Rotation Processor), a learnable structured two-sided orthogonal processor that replaces fixed Hadamard mixing while preserving exact full-precision equivalence. HARP represents each rotation as a product of sparse butterfly-like block-orthogonal stages, supports non-power-of-two dimensions through Mixed-Radix schedules, and initializes to the RHT processor up to a fixed permutation. Fitted only on calibration data, HARP adapts the quantization basis to each layer and backend. Across 2--4-bit settings on Llama models from 1B to 70B, HARP consistently improves perplexity and yields its clearest zero-shot gains at 2 bits; a 2-bit Qwen3-8B experiment shows the same transfer beyond the Llama family. HARP also preserves deployment efficiency: on Llama 2 7B at 2 bits, it reaches 128 tok/s, retaining 90% of RHT throughput (142 tok/s) and running approximately $2.1\times$ faster than FP16 (61 tok/s).

As large language models continue to scale, low-bit weight-only post-training quantization (PTQ) offers a practical solution to their memory-efficient deployment. Although block-wise PTQ is capable of matching the full-precision (FP) baseline on basic language modeling and understanding, its quality is degraded for generative tasks -- especially at longer responses and extended chains of thought, which is critical in boosting task accuracy. We attribute this shortfall to two factors: (i) the omission of the unembedding layer (the LM head) in block-wise optimization and (ii) the reliance on the mean squared error (MSE) objective. Both factors cause the token probability distribution of the quantized model to misalign with that of the FP model, yielding notable accuracy drops on text generation benchmarks. To rectify the discrepancy, we introduce Logit-aware Final-block Quantization (LFQ), a simple yet effective enhancement to block-wise PTQ that quantizes the final Transformer block by minimizing the cross-entropy between the logits of the FP model and those of its quantized counterpart. By aligning token probabilities at the logit level in the final block, LFQ consistently improves the accuracy of complex generation tasks over state-of-the-art block-wise PTQ across diverse model families, while maintaining parity with FP baselines on language modeling and understanding.

Trajectory prediction is a fundamental task for autonomous systems, requiring complex reasoning about multi-agent interactions and intents. Large language models (LLMs) have recently been adopted for this task, as they provide strong contextual reasoning and interpretable, language-based trajectory representations. However, these LLM-based predictors are extremely memory- and compute-intensive, making them difficult to deploy on resource-constrained edge devices such as on-board computers in autonomous robots. To bridge this gap, we propose BitTP, which converts an LLM-based trajectory predictor into a lightweight bitlinear architecture. We demonstrate that weight-only quantization to 1.58-bit (BitTP-Weight) is optimal. Crucially, activations must remain in full precision, as quantizing them leads to severe degradation and instability in spatio-temporal reasoning. Empirically, BitTP-Weight not only preserves but improves prediction quality over the full-precision (BF16) LLM baseline, reducing ADE by 14.29% and FDE by 20.97% on average, while simultaneously reducing memory usage and inference latency relative to other quantization methods. These results demonstrate that carefully designed quantization acts as an effective regularizer, enabling the practical deployment of sophisticated LLM-based reasoning on edge devices. Code is available at: https://github.com/MintCat98/BitTP.

The wide adoption of LLMs has led to their use in great variety of applications and scenarios, such as chatbot assistants and data annotation, creating the need for the models to satisfy certain budget and hardware constraints. This has led to the trend of LLMs being released in batches consisting of similar models of various sizes for the family of models to adhere to as wide of a range of constraints as possible. In this paper, we validate distillation and quantization as a cost-effective way to expand model families to new sizes and hardware formats. Based on the open-recipe Apertus 8B LLM, we produce Apertus-v1.1 - a distilled family of models with up to 4B parameters trained on 1.7T permissive license tokens. We demonstrate cost-efficiency and strong accuracy performance of our approach for covering large ranges of hardware and systems requirements.

Quantization is an effective approach to reduce the memory footprint and inference cost of large language models (LLMs), yet maintaining performance in the ultra-low-bit regime remains challenging. Existing post-training methods often suffer from severe accuracy degradation, while quantization-aware training requires costly retraining and additional resources. Moreover, most mixed-precision strategies rely on coarse-grained or heuristic sensitivity analysis that overlooks fine-grained variations within weight matrices. We propose WINDQuant, a reinforcement-learning-based allocation controller for ultra-low-bit LLM quantization. Rather than introducing another low-level quantization operator, WINDQuant learns how to assign bit-widths and quantization treatments to fine-grained column chunks under a global storage budget. By operating at the column-chunk level, WINDQuant enables flexible and fine-grained precision assignment within layers under a global target bit-width. The implementation combines PPO with activation-aware calibration, lightweight per-unit quantizer fitting, and explicit effective-bit accounting of the learned mixed-precision plan. Experiments on LLaMA models demonstrate that WINDQuant achieves competitive performance in ultra-low-bit settings while reducing optimization overhead relative to retraining-based approaches, highlighting reinforcement learning as a practical controller for adaptive mixed-precision quantization.

Low-bit activation quantization remains a major bottleneck in efficient large language model (LLM) deployment. The difficulty is not only that activations contain outliers, but that their distributions are often poorly matched to a low-bit uniform quantizer. Existing post-training quantization (PTQ) methods suppress peaks, balance channels, or minimize reconstruction error, yet they rarely specify what activation distribution is actually easy to discretize. As a result, activations may appear numerically smoother while still incurring large quantization error because the quantization range remains wide or most values collapse into a few levels near the mean. We recast activation transformation as quantizer-facing distribution design and analyze quantization error from an information-theoretic perspective. Our analysis shows that quantization-friendly activations should jointly have a smaller numerical range and sufficient dispersion within that range. Guided by this analysis, we propose InfoQuant, a train-free method that employs Peak Suppression Orthogonal Transformation (PSOT) to shape activations into more quantization-friendly distributions. We further introduce adaptive outlier-token selection to improve the robustness of PSOT during optimization. Across multiple LLM families, InfoQuant consistently outperforms prior PTQ and end-to-end training baselines. Under W4A4KV4, it preserves 97% of floating-point accuracy on average and reduces the LLaMA-2 13B performance gap by 42% over the previous state of the art. Code is available at https://github.com/LLIKKE/InfoQuant

We apply the influence-adaptive Walsh geometry of a companion theory paper (arXiv:2605.01637) to extreme low-bit weight-only LLM quantization. The recipe is one math-invariant transformation: WHT-rotate each linear layer's weight matrix and rescale its columns by per-coordinate Walsh-basis activation energy before handing off to a reconstruction-error quantizer (Intel auto-round). This biases per-group integer rounding toward high-spectral-energy channels. On four pretrained decoder-only models from 135M to 1.5B parameters, BBT-spectral reduces wikitext-2 perplexity by 15-58% relative to vanilla auto-round at W2A16; we also report a TinyLlama-1.1B auxiliary data point. Three extensions transfer the recipe to families it failed on: a per-head PCA matrix-Gamma replacement of q_norm/k_norm for Qwen3 attention (PPL 136.76 -> 88.99 on Qwen3-0.6B); an SO(2) per-pair rotation that commutes with RoPE (PPL 36.93 -> 21.84 on Qwen2.5-1.5B); and an MoE-aware input-side absorption fix identified by architectural fuzzing of Laguna-style fused-expert layouts. A W2-vs-W4 ablation gives a deliberate negative control: the redistribution payoff falls within the +/-0.5 PPL noise floor at W4, consistent with the Schur-convexity intuition that the cost of unconcentrated influence vanishes as the noise budget shrinks. All quantized weights export to OpenVINO IR and run on Intel NPU + Arc dGPU + CPU with PPL invariant to device within +/-0.1. We do not claim a formal Boolean-to-real-valued transfer of the theory paper's majorization argument: the WHT activation energy used here is not the Boolean influence of the theory paper, the link is intuitive, and the contribution is engineering value rather than a transferred theorem. Head-to-head benchmarks against SpinQuant, QuaRot, QuIP-sharp, AQLM, OmniQuant, and ButterflyQuant at matched calibration are the main future-work item.

Mixture-of-Experts (MoE) large language models reduce per-token computation through sparse expert activation, but their deployment remains memory-intensive because all expert weights must be kept resident in memory. Existing MoE compression methods struggle in the ultra-low-bit regime: pruning irreversibly removes model capacity, while coarse-grained quantization fails to allocate bits according to heterogeneous expert and weight-direction importance. We propose BitsMoE, a spectral-energy-guided bit-allocation framework for MoE LLM quantization. BitsMoE decomposes each MoE layer by SVD into a shared basis and expert-specific spectral factors, retaining the shared basis without quantization to preserve common cross-expert structure and using the expert-specific factors as fine-grained quantization units. To determine the bit-width of each unit, BitsMoE formulates spectrum-wise mixed-precision quantization as an activation-aware reconstruction surrogate and solves an integer linear program that minimizes estimated reconstruction loss under a fixed bit budget. Experiments across multiple MoE LLMs show that BitsMoE substantially reduces downstream task accuracy degradation in ultra-low-bit regimes. Under 2-bit quantization on Qwen3-30B-A3B-Base, BitsMoE accelerates quantization by 12.3$\times$, improves average accuracy by 27.83 percentage points, and increases decoding speed by 1.76$\times$ over GPTQ. Our model and code are publicly available at https://github.com/zjiayu064/BitsMoE.

On-device adaptation of large language models commonly keeps a quantized base model frozen while training and deploying a small, task-specific LoRA adapter. In the unmerged adapter-mode setting, however, the adapter is more than a compact storage module; it introduces an additional dense floating-point branch, maintains a trainable state for local updates, and acts as a unit of communication and hot-swapping.We introduce LoRDBA, a LoRA-compatible adapter that replaces both low-rank factors with binary sign carriers while representing magnitudes through lightweight, channel-wise scales, converting the dense adapter branch into two sign-accumulation matrix multiplications interleaved with channel-wise scaling. A finite-sample analysis shows that reconstruction quality is governed by the residual-to-magnitude ratio of the original LoRA factors. In adapter-mode experiments, LoRDBA outperforms low-bit baselines at matched model sizes while matching fp16 LoRA quality in selected regimes. The unmerged adapter incurs at most 8% prefill latency overhead at matched rank r=16 despite an over 10x reduction in adapter footprint, with moderate training memory overhead of approximately 1.6x that of fp16 LoRA.

Discrete autoregressive (AR) text-to-image (T2I) models pair a VQ tokenizer with an AR policy, and current post-training pipelines optimize only the policy while keeping the VQ decoder frozen. Recent diffusion T2I work, exemplified by REPA-E, has shown that the VAE itself constitutes a key alignment bottleneck, yet no analogous investigation exists for discrete AR models. We show that policy-only optimization induces Latent Covariate Shift: as the policy evolves, the resulting token distribution diverges from the ground-truth distribution on which the decoder was trained, such that reward scores improve while decoded image quality degrades. To address this mismatch, we propose RankE, the first end-to-end post-training framework for discrete T2I generation. Rather than optimizing the policy against a fixed decoder, RankE co-evolves both components through alternating optimization: each module maximizes a ranking-based alignment objective while being regularized by a stability-preserving anchor suited to its parameter space. This co-evolution breaks the fidelity--alignment trade-off that plagues frozen-decoder approaches: on LlamaGen-XL (775M), standard RL improves CLIP but degrades FID, whereas RankE improves both simultaneously (FID 15.21, CLIP 33.76 on MS-COCO 30K). Consistent gains on Janus-Pro (1B) confirm that decoder co-evolution reliably converts reward optimization into pixel-space quality improvements.

Vision-Language Models (VLMs) achieve outstanding performance, yet their huge model size severely hinders deployment on edge devices with limited resources. As an efficient model compression technique, vector quantization (VQ) excels in ultra-low-bit representation, which maps model weights to discrete codewords in a compact codebook to cut memory consumption and transmission overhead while preserving model capability. Direct VQ application to VLMs still has two core limitations. First, cross-modality weight distribution differences brought by visual and textual inputs cannot be well fitted by a single unified codebook. Second, current second-order error compensation ignores first-order gradient information, causing weight deviation from pre-trained optimal states, gradient drift and biased compensation results. This work proposes MGVQ, a novel vector quantization framework integrating multi-dimensional sensitivity perception and gradient-Hessian fusion. It consists of two core modules: sensitivity-guided structured mixed-precision quantization dynamically assigns different bit-widths according to channel sensitivity via combined global and local sensitivity analysis for refined resource allocation; gradient-aware second-order error compensation embeds first-order gradients into error correction, and adopts Kronecker and Block-LDL decomposition to ensure low computational cost. Extensive experiments on mainstream VLMs including LLaVA-onevision, InternVL2 and Qwen2-VL verify the effectiveness of MGVQ. In 2-bit quantization settings, MGVQ surpasses existing advanced post-training quantization methods significantly, achieving a maximum accuracy improvement of 4.9 points (71.4% vs 67.0% on InternVL2-26B). The proposed method realizes stable and efficient ultra-low-bit VLM quantization, greatly promoting the practical deployment of multimodal large models in resource-limited environments.

Zeroth-order (ZO) optimization enables large-language-model fine-tuning without storing backpropagation activations, while LoRA supplies compact trainable adapters. Combining them creates a rank paradox: increasing LoRA rank improves adapter capacity, but standard two-point ZO either perturbs a rank-dependent number of coordinates or, under atomwise updates, can make the finite-difference signal unobservable. This paper shows that the bottleneck is a measurement-topology problem rather than a need for an external subspace. LoRA already decomposes into matched rank-$1$ atoms, each a complete factor-coordinate block of dimension $d_\text{out}+d_\text{in}$. Querying one atom per step keeps the stored adapter rank $r$ while removing $r$ from the single-query perturbation dimension. The naive atomwise query is still miscalibrated: if it inherits canonical LoRA scaling $α/r$, the active finite-difference signal shrinks as $1/r$ and the active finite-difference signal-to-noise ratio (FD-SNR) as $1/r^2$, producing directional collapse under a fixed residual evaluation-noise floor. AR1-ZO pairs alternating rank-$1$ atom queries with topology-aware scaling $γ=αr$, restoring rank-invariant active signal without auxiliary bases, activation hooks, curvature estimates, or extra forward queries. Theory proves atom minimality, rank-independent active query dimension, directional collapse and restoration, and the remaining rank dependence as an amortized coverage cost. Experiments on OPT and Qwen3 models validate the signal mechanism and show that AR1-ZO makes high-rank LoRA effective among matched-budget ZO methods under the standard two-forward-pass query budget.

Recent advancements in large language models (LLMs) have shown their remarkable capacities in many NLP tasks. However, their substantial size often presents challenges for deployment. This necessitates efficient techniques for model compression, with quantization emerging as a prominent solution. Despite its benefits, the exact impact of quantization (from 2- to 6-bit) on the performance and accuracy of LLMs remains an active area of research. This paper investigates the performance of eight LLMs at various quantization levels, focusing on tasks such as MMLU-Pro for knowledge processing and reasoning, CRUXEval for code comprehension, and MuSR for reading comprehension. Our results show a consistent trend where higher precision (e.g., 8-bit Q8_0) yields improved performance, albeit with diminishing returns. Aggressive quantization (e.g., 2-bit Q2_K) usually retains acceptable accuracy, though some models show a substantial loss in performance. Our findings indicate that while lower bit precision generally reduces performance, the impact varies across models and tasks. Larger models show greater resilience to aggressive quantization, but can still undergo significant drops at lower precision levels. Mid-sized models in the 7-9 billion parameter range strike an optimal balance between efficiency and resource usage. Such results provide insights into the trade-offs between model size, quantization, and performance.

The dynamic range of activations is a first-order constraint for low-bit quantization, activation scaling, and stable LLM inference. Prior work characterized outlier features and massive activations on pre-2024 LLaMA-style models, and the downstream activation-quantization stack inherits that picture without revisiting it for the post-LLaMA open-model boom. We ask the deployment-oriented question: how large can activations get in modern open LLMs, and how does this magnitude vary across families, generations, and training stages? Under a unified pipeline (5,000-sample multi-domain corpus, family-specific tokenization, identical hooks across embeddings, hidden states, attention, MLP/MoE, SwiGLU gates, and final norm), we measure global and layerwise maxima on 27 checkpoints from 8 open families spanning dense, MoE, vision-language, intermediate-training, and instruction-tuned variants. We find that (i) global maxima span over nearly four orders of magnitude at comparable parameter counts, with Qwen3.5 and MoE checkpoints in the 10^2 to 10^3 range and Gemma3-27B-it reaching ~7 x 10^5; (ii) cross-family and cross-generation comparisons break simple monotonic scaling; and (iii) MoE checkpoints exhibit 14.0-23.4x lower peaks than matched-scale dense counterparts, while the residual stream carries the global maximum in 22/24 checkpoints. A lightweight INT-8 sanity check shows that measured maxima co-vary with low-bit reconstruction error via activation-scale selection. We conclude that maximum activation magnitude is a model property tied to family, architecture, and training stage - not a simple byproduct of size - and should be measured and reported alongside any open-weight release before low-bit deployment. The code is publicly available at https://github.com/clx1415926/Max_act_llm.

LLM quantization has become essential for memory-efficient deployment. Recent work has shown that quantization schemes can pose critical security risks: an adversary may release a model that appears benign in full precision but exhibits malicious behavior once quantized by users. However, existing quantization-conditioned attacks have been limited to relatively simple quantization methods, where the attacker can estimate weight regions that remain invariant under the target quantization. Notably, prior attacks have consistently failed to compromise more popular and sophisticated schemes, limiting their practical impact. In this work, we introduce the first quantization-conditioned attack that consistently induces malicious behavior that can be triggered by a broad range of advanced quantization techniques, including AWQ, GPTQ, and GGUF I-quants. Our attack exploits a simple property shared by many modern quantization methods: large outliers can cause other weights to be rounded to zero. Consequently, by injecting outliers into specific weight blocks, an adversary can induce a targeted, predictable weight collapse in the model. This effect can be used to craft seemingly benign full-precision models that exhibit a wide range of malicious behaviors after quantization. Through extensive evaluation across three attack scenarios and LLMs, we show that our attack achieves high success rates against a broad range of quantization methods on which prior attacks fail. Our results demonstrate, for the first time, that the security risks of quantization are not restricted to simpler schemes but are broadly relevant across complex, widely-used quantization methods.

Parameter-efficient fine-tuning (PEFT) techniques offer task-specific fine-tuning at a fraction of the cost of full fine-tuning, but require separate fine-tuning for every new task (combination). In this paper, we explore three ways of generalising beyond single-task training/inference: (i) training on combinations of multiple, related datasets; (ii) at inference, composing the weight matrices of separately trained PEFT modules; and (iii) at inference, composing the outputs of separately trained PEFT modules. We test these approaches on three different LLMs, QLoRA as the PEFT technique, and three sets of controlled text generation datasets for sentiment control, topic control, and multi-attribute control. We find that summing PEFT module outputs is a particularly strong composition method, which consistently either outperforms or matches the performance of alternative approaches. This is the case even when comparing against single-task specialised modules on the single-task test set, where three-module output composition achieves an average 2% point performance increase across all models for sentiment control.

A major recent advance in quantization is given by microscaled 4-bit formats such as NVFP4 and MXFP4, quantizing values into small groups sharing a scale, assuming a fixed floating-point grid. In this paper, we study the following natural extension: assume that, for each group of values, we are free to select the "better" among two or more 4-bit grids marked by one or more bits in the scale value. We formalize the power-of-two-grids (PO2) problem, and provide theoretical results showing that practical small-group formats such as MXFP or NVFP can benefit significantly from PO2 grids, while the advantage vanishes for very large groups. On the practical side, we instantiate several grid families, including 1) PO2(NF4), which pairs the standard NF4 normal grid with a learned grid, 2) MPO2, a grid pair that is fully learned over real weights and activations, 3) PO2(Split87), an explicit-zero asymmetric grid and 4) SFP4, a TensorCore-implementable triple which pairs NVFP4 with two shifted variants. Results for post-training quantization of standard open models and pre-training of Llama-like models show that adaptive grids consistently improve accuracy vs single-grid FP4 under both weight-only and weight+activation. Source code is available at https://github.com/IST-DASLab/GridGames.

Large language models (LLMs) are costly to deploy due to their large memory footprint and high inference cost. Weight-activation quantization can reduce these costs, but low-bit activation quantization remains difficult because activation outliers induce large quantization error. Recent rotation-based methods address this by applying orthogonal transformations that redistribute activation magnitude across dimensions, but existing approaches either require expensive end-to-end rotation training or rely on stored activation corpora, introducing significant compute or storage overhead. We propose a lightweight post-training rotation calibration method for LLM activation quantization. Our method learns orthogonal rotations that align normalized activations with the corners of an inscribed hypercube, encouraging activation energy to be distributed more evenly across dimensions. This objective admits an efficient closed-form update via the orthogonal Procrustes problem, avoiding gradient-based optimization over the orthogonal group. We further introduce an online calibration procedure that updates rotations as calibration samples are processed, eliminating the need to store activations on disk and allowing rotations to adapt to quantized activation distributions during calibration. Experiments on Llama-2 and Llama-3 models from 3B to 70B parameters show that our method achieves competitive or improved performance across perplexity benchmarks and common sense reasoning tasks while avoiding both costly end-to-end training and large offline activation storage.

Post-training quantization has emerged as a widely adopted technique for compressing and accelerating the inference of Large Language Models (LLMs). The primary challenges in LLMs quantization stem from activation outliers, which significantly degrade model performance especially at lower bit precision. While recent approaches attempt to mitigate outliers through linear transformations across feature dimensions, our analysis reveals that the transformed weights and activations still exhibit persistent outlier patterns with concentrated magnitude distributions. In this paper, we first model the mathematical relationship between quantization error and outliers, and then introduce a new metric Flatness to quantify the distribution of outliers. Based on this, we derive the theoretical optimal solution with respect to Flatness. Building on these insights, we propose Bidirectional Diagonal Quantization (BDQ), a novel post-training quantization framework that effectively disperses outlier patterns through optimized matrix transformations. BDQ strategically distributes outlier magnitudes across matrix dimensions via learned diagonal operations. Extensive experiments demonstrate that BDQ establishes a new quantization benchmark. It achieves less than 1% accuracy drop in W4A4 quantization on the LLaMA-3-8B model. In the more challenging W2A4KV16 experiment, compared to state-of-the-art approaches, BDQ reduces the performance gap by 39.1% on the DeepSeek-R1-Distill-LLaMA-70B model.

Large language models (LLMs) achieve strong performance but incur high deployment costs, motivating extremely low-bit but lossy quantization. Existing quantization algorithms mainly focus on improving the numerical accuracy of forward computation to eliminate performance degradation. In this paper, we show that extremely quantized LLMs suffer from systematic smoothness degradation beyond numerical precision loss. Through a smoothness proxy, we observe that such degradation becomes increasingly severe as the quantization bit-width decreases. Furthermore, based on sequence neighborhood modeling, we find that quantized models exhibit a rapid reduction of effective token candidates within the prediction neighborhood, which directly leads to a sparser decoding tree and degraded generation quality. To validate it, we introduce a simple smoothness-preserving principle in both post-training quantization and quantization-aware training, and demonstrate that preserving smoothness brings additional gains beyond numerical accuracy. The core goal of this paper is to highlight smoothness preservation as an important design consideration for future extreme quantization methods. Code is available at https://github.com/xuyuzhuang11/FINE.

Large reasoning models (LRMs) reach competition-level math and coding accuracy via long autoregressive decoding, making per-token decoding cost a primary deployment concern. Weight quantization is the standard tool for acceleration, but representative recipes -- including state-of-the-art end-to-end (E2E) QAT -- lose accuracy on long-decoding reasoning benchmarks despite preserving perplexity and short-decode accuracy. Through a systematic gradient-direction analysis, we identify two factors driving this gap: (i) KV-cache fidelity preservation under the QAT loss, which E2E supervision attenuates via the softmax Fisher metric; and (ii) Hessian-subspace alignment between calibration data and the deployment distribution. We propose LookAhead Quantization (LAQuant), a layer-wise weight-only QAT method that addresses both factors without online-transform overhead by combining reasoning-domain calibration with a one-layer lookahead loss whose implicit cross-layer co-adaptation preserves the next-layer residual stream. For Qwen3-4B under W3G128 quantization, LAQuant improves AIME25 Pass@1 over ParoQuant by 15.11pp (1.93pp over ParoQuant++ at matched calibration) while achieving a 3.42x decoding speedup over FP16 on RTX A6000, compared with ParoQuant's 3.01x.

Post-training weight-only quantization to 4 bits is widely used to reduce the memory and compute costs of large language model inference. Existing PTQ methods, such as AWQ and GPTQ, improve how weights are mapped onto a fixed 4-bit grid through scaling, clipping, or error compensation. To further improve accuracy, methods such as OmniQuant and QuIP# uses gradient-assisted algorithms at the cost of hours of quantization time. In this work, we propose AAAC (Activation-Aware Adaptive Codebooks), a lightweight method for 4-bit LLM weight quantization. AAAC replaces the fixed scalar codebook used in standard quantization with two small learned scalar codebooks (64 bytes) per layer. Each group of weights selects the codebook that minimizes activation-weighted reconstruction error, encoding the choice in the unused sign bit of the group's positive scale and adding zero storage overhead. AAAC completes in 3--30 minutes on a single GPU, and adds no memory beyond the model itself. We evaluate against AWQ, GPTQ, IF4, GPTVQ, OmniQuant, SqueezeLLM, and QuIP# across model families. AAAC outperforms baselines at orders-of-magnitude less quantization time.

Large language models (LLMs) have transformed artificial intelligence, yet classical architectures impose a fundamental constraint: every trainable parameter demands classical memory that scales unfavourably with model size. Quantum computing offers a qualitatively different pathway, but practical demonstrations on real hardware have remained elusive for models of practical relevance. Here we show that Cayley-parameterised unitary adapters -- quantum circuit blocks inserted into the frozen projection layers of pre-trained LLMs and executed on a 156-qubit IBM Quantum System Two superconducting processor -- improve the perplexity of Llama 3.1 8B, an 8-billion-parameter model in widespread use, by 1.4% with only 6,000 additional parameters and end-to-end inference validated on real Quantum Processing Unit (QPU). A systematic study on SmolLM2 (135M parameters), chosen for its tractability, reveals monotonically improving perplexity with unitary block dimension, 83% recovery of compression-induced degradation, and correct answers to questions that both classical baselines fail -- with a sharp noise-expressivity phase transition identifying the concrete path to quantum utility at larger qubit scales.

This paper presents a comparative study of parameter-efficient fine-tuning (PEFT) methods, including LoRA and QLoRA, applied to the task of adapting large language models to the Bashkir language, a low-resource agglutinative language of the Turkic family. Experimental evaluation is conducted on a Bashkir text corpus of 71k documents (46.9M tokens) using models of various architectures: DistilGPT2, GPT-2 (base, medium), Phi-2, Qwen2.5-7B, DeepSeek-7B, and Mistral-7B. To improve the reliability of results, each configuration was trained with three different random seeds. The lowest perplexity on the test set was obtained for GPT-2 medium with full fine-tuning (3.34). Meanwhile, QLoRA applied to Mistral-7B (3.79) and Phi-2 (3.81) achieved comparable quality with over 40 times fewer trainable parameters. However, we also observed cases of significant quality degradation when using PEFT for certain architectures (e.g., DeepSeek-7B with rank 8, perplexity = 129.55), indicating that the outcome depends critically on the choice of the base model and its tokenizer. Additionally, a qualitative analysis of generated texts based on Bashkir prompts revealed that models with the best perplexity do not necessarily produce the most coherent outputs: QLoRA-tuned models generated monolingual Bashkir continuations, whereas the fully fine-tuned model with the lowest perplexity frequently switched to English. The results suggest that QLoRA on 7B-scale models offers an effective compromise between quality and computational cost for Bashkir. To ensure reproducibility, open data, code, and trained adapters will be released upon acceptance.

Large Language Models (LLMs) have demonstrated remarkable capabilities. However, their massive parameter scale leads to significant resource consumption and latency during inference. Post-training weight-only quantization offers a promising solution by reducing model size and accelerating token generation through alleviating the memory-bound issue. Nevertheless, the presence of inherent systematic outliers in weights continues to be a major obstacle. While existing methods, such as scaling and rotation, attempt to address this issue, the performance remains unsatisfactory. In this paper, we propose Outlier Self-Absorption Quantization (OSAQ), which performs additive weight suppression guided by the second-order low-rank property for low-bit weight-only quantization of LLMs. Specifically, we observe that the Hessian exhibits low-rank consistency across different inputs, with certain directions consistently showing vanishing curvature. Leveraging this property, we identify a stable null space of the Hessian and then construct an additive weight transformation by linearly combining the vectors within this null space, thereby suppressing weight outliers without affecting the task loss. This additive transformation can be absorbed into the weights offline, requiring no inter-layer transformations and introducing no inference overhead. Moreover, the construction is efficiently achieved by a closed-form solution, without resource-intensive training or iterative procedures. Extensive experiments demonstrate that OSAQ effectively suppresses outliers and enhances low-bit quantization performance. For instance, in 2-bit quantization, OSAQ, when integrated with GPTQ, achieves over 40% lower perplexity compared to vanilla GPTQ.

Model quantization has become essential for efficient large language model deployment, yet existing approaches involve clear trade-offs: methods such as GPTQ and AWQ achieve practical compression but are lossy, while lossless techniques preserve fidelity but typically do not accelerate inference. This paper explores the middle ground of statistically-lossless compression through three complementary notions of losslessness for quantized LLMs. First, task-lossless compression preserves zero-shot benchmark accuracy within natural sampling variance and remains achievable at aggressive bitwidths. Second, we formalize the stricter notion of distribution-lossless compression, requiring the quantized model's next-token distribution to be practically indistinguishable from the original, and propose the Expected Acceptance Rate (EAR), the maximum token-agreement probability under optimal coupling, as a directly interpretable fidelity metric (for example, EAR >= 0.99 indicates 99% agreement). Third, we prove a gamma-squared variance law showing that symmetric quantization inflates noise variance by gamma squared relative to asymmetric quantization, making asymmetry necessary for distribution-lossless fidelity but not for task-level preservation. Using SLQ, a layer-wise non-uniform method with asymmetric quantization and wide bitwidth search, we achieve task-lossless compression at well below 4 bits per parameter (as low as 3.3 bits depending on the model), distribution-lossless compression at 5 to 6 bits per parameter on average, and inference speedups of 1.7 to 3.6x relative to FP16 with optimized kernels. Source code is available at https://github.com/IST-DASLab/SLQ.

Large Language Models are routinely compressed via post-training quantization to reduce inference costs and memory footprint for cloud and edge deployment, yet the impact of this compression on model quality remains poorly understood. Existing studies typically compare only two conditions (full-precision vs. a single quantized variant), rely on aggregate bias metrics, and evaluate a single model family, making it impossible to distinguish gradual degradation from threshold-dependent safety failures. We conduct a controlled empirical study of three instruction-tuned models (Qwen2.5-7B, Mistral-7B, Phi-3.5-mini) at five precision levels (BF16 through 3-bit) on 12,148 BBQ bias benchmark items across 5 random seeds, totaling 911,100 inference records. Our results reveal that 3-bit quantization causes 6-21% of previously unbiased items to develop new stereotypical behaviors, following a clear dose-response pattern confirmed via logistic regression, while models' willingness to select "unknown" answers declines by 17.4%. Crucially, these item-level changes are invisible to standard quality metrics: perplexity increases by less than 0.5% at 8-bit and under 3% at 4-bit across all three models, yet 2.5-5.6% of items already develop new biases at 4-bit. These findings demonstrate that aggregate evaluation metrics systematically miss fairness-critical degradation, underscoring the need for quality-aware compression protocols that explicitly test for bias emergence before deployment.

Quantization is a key method for reducing the GPU memory requirement of training large language models (LLMs). Yet, current approaches are ineffective for 4-bit activations and 8-bit gradients, which would easily cause slow convergence or accuracy loss. To address this, we introduce AGoQ, incorporating two new techniques: 1) a layer-aware activation quantization algorithm that allocates appropriate bit-widths for activations of various layers based on their types and pipeline stages to achieve near 4-bit activation storage, and 2) a gradient quantization algorithm that reduces memory usage and shortens communication time by employing 8-bit gradient storage and precision-preserving 8-bit All-Reduce communication. We conduct extensive experiments using different sizes of LLMs on two GPU clusters (up to 64 GPUs), and the experimental results show that our AGoQ reduces the memory by up to 52% and achieves up to 1.34$\times$ improvement of training speed compared to state-of-the-art training systems Megatron-LM (w/ or w/o ZeRO), COAT and DeepSpeed with 8B to 32B LLaMA models, while achieving convergence loss on pretraining and comparable accuracy on downstream tasks with LLaMA architectures.

Large language models (LLMs) have driven major progress in NLP, yet their substantial memory and compute demands still hinder practical deployment. Binarization can compress weights to 1 bit, fundamentally lowering compute and bandwidth cost. However, existing methods cannot address activation heavy tails and thus must keep activations in high precision, preventing true end-to-end acceleration. To overcome this limitation, we propose BWLA (Binarized Weights and Low-bit Activations), the first post-training quantization framework that preserves high accuracy while achieving 1-bit weight quantization together with low-bit activations (e.g., 6 bits). The Orthogonal-Kronecker Transformation (OKT) learns an orthogonal mapping via EM minimization, converting unimodal weights into symmetric bimodal forms while suppressing activation tails and incoherence. The Proximal SVD Projection (PSP) then performs lightweight low-rank refinement through proximal SVD projection, further enhancing quantizability with minimal overhead. On Qwen3-32B, BWLA reaches a Wikitext2 perplexity of 11.92 under 6-bit activations (vs. 38 from SOTA), improves five zero-shot tasks by more than 70%, and delivers 3.26 times inference speedup, demonstrating strong potential for real-world LLM compression and acceleration.

We present Activation Residual Hessian Quantization (ARHQ), a post-training weight splitting method designed to mitigate error propagation in low-bit activation-weight quantization. By constructing an input-side residual Hessian from activation quantization residuals (G_x), ARHQ analytically identifies and isolates error-sensitive weight directions into a high-precision low-rank branch. This is achieved via a closed-form truncated SVD on the scaled weight matrix W G^{1/2}_x . Experimental results on Qwen3-4B-Thinking-2507 demonstrate that ARHQ significantly improves layer-wise SNR and preserves downstream reasoning performance on ZebraLogic even under aggressive quantization. The code is available at https://github.com/BeautMoonQ/ARHQ.

Post-training quantization (PTQ) has become an important technique for reducing the inference cost of Large Language Models (LLMs). While recent mixed-precision methods improve ultra-low bit quantization by preserving critical subspaces in high precision, they typically construct these subspaces relying solely on activation statistics. This ignores the fundamental nature of linear operations, where the output perturbation is jointly driven by both activation and weight quantization noise. In this paper, we propose CoQuant, a joint weight-activation subspace projection method. By theoretically modeling the expected output error, CoQuant formulates a closed-form weighted PCA solution that balances activation and weight covariances to select the optimal high-precision subspace. Extensive experiments on Llama-3.2 and Qwen2.5 models show that CoQuant consistently outperforms strong PTQ baselines in both WikiText perplexity and zero-shot common-sense reasoning accuracy. These results demonstrate that joint weight-activation subspace modeling provides a principled and effective direction for low-bit LLM quantization. The source code is available at https://github.com/Zachary5895/CoQuant.

Federated fine-tuning provides a practical route to adapt large language models (LLMs) on edge devices without centralizing private data. However, in mobile deployments, the training wall-clock is often dominated by straggler-limited uplink communication under heterogeneous bandwidth, intermittent participation, and non-IID client data. Although parameter-efficient fine-tuning (PEFT) methods such as LoRA and QLoRA reduce local memory and trainable parameters, repeated transmission of adapter updates remains a major bottleneck. We propose Fed-FSTQ, a semantic-sensitivity-aware communication-control primitive for communication-efficient federated LLM fine-tuning. Fed-FSTQ uses a lightweight token-level Fisher proxy to estimate semantic sensitivity, couples token-guided sparsification with mixed-precision adapter-update quantization, and allocates higher communication fidelity to semantically load-bearing evidence while suppressing redundant transmission. The method is drop-in compatible with standard federated PEFT pipelines and requires no change to the server aggregation rule. Experiments on multilingual QA and medical QA under non-IID partitions show that Fed-FSTQ reduces cumulative uplink traffic required to reach a fixed quality threshold by 46-fold relative to a Fed-LoRA baseline and improves straggler-limited wall-clock time-to-accuracy by 52%. Under the corrected Controlled LTE-20Mbps accounting, Fed-FSTQ reduces per-round time from 414.60s to 67.29s and reduces per-round energy from 839.20J to 146.28J, yielding a 6.16-fold speedup. On NVIDIA Jetson-class edge devices, Fisher-guided token reduction also yields up to a 1.55-fold inference speedup, demonstrating deployability under tight resource constraints.

The deployment of intelligent reinforcement learning (RL) agents on resource-constrained edge devices remains a fundamental challenge due to the substantial memory, computational, and energy requirements of modern deep learning systems. While large language models (LLMs) have emerged as powerful architectures for decision-making agents, their multi-billion parameter scale confines them to cloud-based deployment, raising concerns about latency, privacy, and connectivity dependence. We introduce BitRL, a framework for building RL agents using 1-bit quantized language models that enables practical on-device learning and inference under severe resource constraints. Leveraging the BitNet b1.58 architecture with ternary weights (-1, 0, +1) and an optimized inference stack, BitRL achieves 10-16x memory reduction and 3-5x energy efficiency improvements over full-precision baselines while maintaining 85-98 percent of task performance across benchmarks. We provide theoretical analysis of quantization as structured parameter perturbation, derive convergence bounds for quantized policy gradients under frozen-backbone architectures, and identify the exploration-stability trade-off in extreme quantization. Our framework systematically integrates 1-bit quantized language models with reinforcement learning for edge deployment and demonstrates effectiveness on commodity hardware.

Quantum computing devices are recognized as powerful tools for solving NP-complete problems. However, the intricacy of their modeling presents notable barriers for non-specialists, while the tedious iteration of constraint weights and modeling methodologies also consumes substantial effort on the part of experts. To address these challenges, this study integrates a femtosecond laser-pumped Coherent Ising Machine (CIM) with an LLM-driven agentic system by leveraging the LangGraph and LangChain frameworks. Comprehensive investigations demonstrate that large language models (LLMs) can effectively perform such tasks in modeling as QUBO/Ising model calibration, constraint weight decision iteration and rapid validation of literature-reported schemes. Notably, all these tasks can be fully implemented based on domestic large models, combined with domestically developed CIM hardware, we truly achieve the practical empowerment of quantum CIM that fully relies on all-domestic agentic large models and hardware. This work successfully realizes robust technological integration, laying a solid foundation for subsequent research. Nevertheless, it also identifies the persisting challenges in the two cutting-edge fields of large models and quantum computing at the current stage. Encouragingly, we unexpectedly discover a promising new paradigm where accumulated knowledge from agent-assisted quantum computing iterations reciprocally enhances the agent's own problem-solving capability, thereby addressing these challenges.

Many applications of LLM-based text regression require predicting a full conditional distribution rather than a single point value. We study distributional regression under empirical-quantile supervision, where each input is paired with multiple observed quantile outcomes, and the target distribution is represented by a dense grid of quantiles. We address two key limitations of current approaches: the lack of local grounding for distribution estimates, and the reliance on shared representations that create an indirect bottleneck between inputs and quantile outputs. In this paper, we introduce Quantile Token Regression, which, to our knowledge, is the first work to insert dedicated quantile tokens into the input sequence, enabling direct input-output pathways for each quantile through self-attention. We further augment these quantile tokens with retrieval, incorporating semantically similar neighbor instances and their empirical distributions to ground predictions with local evidence from similar instances. We also provide the first theoretical analysis of loss functions for quantile regression, clarifying which distributional objectives each optimizes. Experiments on the Inside Airbnb and StackSample benchmark datasets with LLMs ranging from 1.7B to 14B parameters show that quantile tokens with neighbors consistently outperform baselines (~4 points lower MAPE and 2x narrower prediction intervals), with especially large gains on smaller and more challenging datasets where quantile tokens produce substantially sharper and more accurate distributions.

Auto-regressive Large Language Models (LLMs) achieve strong performance on coding tasks, but incur high memory and inference costs. Diffusion-based language models (d-LLMs) offer bounded inference cost via iterative denoising, but their behavior under post-training quantization (PTQ) has been sparsely explored. We investigate the application and robustness of PTQ techniques, specifically GPTQ and a modified Hessian-Aware Quantization (HAWQ) algorithm, on a diffusion-based coding LLM (CoDA) and observe that these methods applied to CoDA exhibit greater robustness at low bitwidths compared to Qwen3-1.7B, its auto-regressive counterpart, under a standardized evaluation pipeline. We find that in our setup, CoDA exhibits greater robustness at low bitwidths (2-4 bits), with smaller accuracy degradation across HumanEval and MBPP benchmarks. Additionally, mixed-precision configurations derived from HAWQ provide smooth trade-offs across accuracy, latency, and memory. The results suggest that diffusion LLMs may offer advantages for efficient deployment due to more quantization-resilience.

Post-Training Quantization (PTQ) is critical for the efficient deployment of Large Language Models (LLMs). While 4-bit quantization is widely regarded as an optimal trade-off, reducing the precision to 2-bit usually triggers a catastrophic ``performance cliff.'' It remains unclear whether the underlying mechanisms differ fundamentally. Consequently, we conduct a systematic mechanistic analysis, revealing two qualitatively distinct failure modes: Signal Degradation, where the computational patterns remain intact but information precision is impaired by cumulative error; and Computation Collapse, where key components fail to function, preventing correct information processing and destroying the signal in the early layers. Guided by this diagnosis, we conduct mechanism-aware interventions, demonstrating that targeted, training-free repair can mitigate Signal Degradation, but remains ineffective for Computation Collapse. Our findings provide a systematic diagnostic framework for PTQ failures and suggest that addressing Computation Collapse requires structural reconstruction rather than mere compensation.

Deploying large language models (LLMs) in resource-constrained environments is hindered by heavy computational and memory requirements. We present LBLLM, a lightweight binarization framework that achieves effective W(1+1)A4 quantization through a novel three-stage quantization strategy. The framework proceeds as follows: (1) initialize a high-quality quantized model via PTQ; (2) quantize binarized weights, group-wise bitmaps, and quantization parameters through layer-wise distillation while keeping activations in full precision; and (3) training learnable activation quantization factors to dynamically quantize activations to 4 bits. This decoupled design mitigates interference between weight and activation quantization, yielding greater training stability and better inference accuracy. LBLLM, trained only using 0.016B tokens with a single GPU, surpasses existing state-of-the-art binarization methods on W2A4 quantization settings across tasks of language modeling, commonsense QA, and language understanding. These results demonstrate that extreme low-bit quantization of LLMs can be both practical and highly effective without introducing any extra high-precision channels or rotational matrices commonly used in recent PTQ-based works, offering a promising path toward efficient LLM deployment in resource-limited situations.

Quantization has become a standard tool for efficient LLM deployment, especially for local inference, where models are now routinely served at 2-3 bits per parameter. The state of the art is currently split into simple scalar quantization techniques, such as GPTQ or AWQ, which are widely deployed but plateau in accuracy at 3-4 bits per parameter (bpp), and "second-generation" vector- or trellis-quantized methods, such as QTIP, GPTVQ and AQLM, which push the accuracy frontier but are notoriously hard to implement and to scale. In this paper, we ask whether this gap is fundamental, or whether a carefully optimized $\textit{scalar}$ quantizer can recover most of it. We answer in the affirmative, by introducing GSQ (Gumbel-Softmax Quantization), a post-training scalar quantization method which jointly learns the per-coordinate grid assignments and the per-group scales using a Gumbel-Softmax relaxation of the discrete grid. GSQ matches the cardinality of the relaxation to the small number of levels available in the target bit-width regime (e.g., 3-8 levels for ternary and 3 bpp, respectively), making optimization tractable. Practically, on the standard Llama-3.1-8B/70B-Instruct models, GSQ closes most of the gap between scalar quantization and the QTIP frontier at 2 and 3 bits, while using a symmetric scalar grid with group-wise quantization, and thus remains compatible with existing scalar inference kernels. We further show that the same discrete-assignment optimization can be applied to practical GGUF K-Quant checkpoints: starting from publicly released GGUF models, GSQ improves accuracy while projecting the result back into the same deployment format. Finally, GSQ scales to trillion-scale Mixture-of-Experts models such as Kimi-K2.5, where vector-quantized methods are difficult to apply. The source code is publicly available at https://github.com/IST-DASLab/GSQ.

Deploying Vision-Language Models (VLMs) under aggressive low-bit inference remains challenging because inference cost is dominated by the long visual-token prefix during prefill and the growing KV cache during autoregressive decoding. Token pruning and low-bit quantization are complementary for reducing these costs, yet naive stage-wise combinations are often brittle due to a mismatch between quantization calibration and pruning execution. We present a collaborative quantization-and-pruning framework that unifies low-bit inference and deterministic visual-token pruning in a single deployable pipeline. The framework introduces the \textbf{Q}uantization \textbf{U}nified \textbf{O}ffline \textbf{T}oken \textbf{A}llocator (\textbf{QUOTA}), which converts low-bit calibration signals into a layer-wise token allocation schedule and materializes it as a pruning recipe. Token importance is evaluated under deployed W4A4 operators with a quantized KV cache by combining activation magnitude, attention cues, and an explicit low-bit risk signal, enabling consistent budgeted top-$k$ selection. Experiments on standard VLM benchmarks show improved robustness over stage-wise baselines under the same low-bit regime, achieving 95.65% average retention while retaining only 30% of visual tokens, compared with about 94.3% retention for representative stage-wise combinations. The code will be released.

Scalar quantization of large language models (LLMs) is fundamentally limited by information-theoretic bounds. While vector quantization (VQ) overcomes these limits by encoding blocks of parameters jointly, practical implementations must avoid the need for expensive lookup mechanisms or other explicit codebook storage. Lattice approaches address this through highly structured and dense packing. This paper explores the Leech lattice, which, with its optimal sphere packing and kissing configurations at 24 dimensions, is the highest dimensional lattice known with such optimal properties. To make the Leech lattice usable for LLM quantization, we extend an existing search algorithm based on the extended Golay code construction, to i) support indexing, enabling conversion to and from bitstrings without materializing the codebook, ii) allow angular search over union of Leech lattice shells, iii) propose fully-parallelisable dequantization kernel. Lastly, we provide a geometric reinterpretation of combining shape--gain quantization with GPTQ-style Hessian corrections: the standard scale-correction step of shape--gain acts as a retraction onto a product of spheres, yielding a Spherical GPTQ primarily acting on directions. We find that low-angular-distortion LLVQ reduces sensitivity to Hadamard/rotation preprocessing, and enables a strong Hadamard-free PTQ in practice. LLVQ delivers state-of-the-art LLM quantization performance, outperforming recent methods such as Quip#, QTIP, and PVQ. The results highlight the effectiveness of high-dimensional lattices for scalable, theoretically grounded model compression.

Maximum likelihood prediction (MLP) is a core task at the heart of modern large language models. Here, we study a quantum version of this task for a simplified data model consisting of independent and identically distributed samples, as a first step. The quantum maximum likelihood predictor (QMLP) is obtained by embedding of empirical probability distributions into quantum states and performing a minimization of quantum relative entropy over a given class of states. We derive non-asymptotic performance guarantees for QMLP in terms of convergence rates and concentration inequalities, both in trace norm and quantum relative entropy. Our approach provides a unified framework to handle MLP within both classical and quantum LLMs. We also consider the related problem of quantum information projection and generalize the quantum Pythagorean theorem to mixture families specified by possibly non-self-adjoint linear constraints. We further show that the Pythagorean inequality continues to hold in the infinite-dimensional setting whenever the convex information-projection problem attains a finite minimum.

Large language models (LLMs) demand substantial computational and memory resources, posing challenges for efficient deployment. Two complementary approaches have emerged to address these issues: token-adaptive layer execution, which reduces floating-point operations (FLOPs) by selectively bypassing layers, and quantization, which lowers memory footprint by reducing weight precision. However, naively integrating these techniques leads to additional accuracy degradation due to reduced redundancy in token-adaptive models. We propose QTALE (Quantization-Robust Token-Adaptive Layer Execution for LLMs), a novel framework that enables seamless integration of token-adaptive execution with quantization while preserving accuracy. Conventional token-adaptive methods reduce redundancy in two ways: (1) by limiting the diversity of training paths explored during fine-tuning, and (2) by lowering the number of parameters actively involved in inference. To overcome these limitations, QTALE introduces two key components: (1) a training strategy that ensures diverse execution paths are actively explored during fine-tuning, and (2) a post-training mechanism that allows flexible adjustment of the execution ratio at inference to reintroduce redundancy when needed. Experimental results show that QTALE enables seamless integration of token-adaptive layer execution with quantization, while keeping the accuracy gap to quantization-only models below 0.5% on CommonsenseQA benchmarks. By combining tokenadaptive execution for FLOPs reduction and quantization for memory savings, QTALE provides an effective solution for efficient LLM deployment.

Post-training quantization reduces the memory needed to run large language models but alters their social biases in ways that aggregate metrics fail to capture. We present the first large-scale study of 50 quantized models evaluated on PostTrainingBiasBench, a unified benchmark of 13 closed- and open-ended bias datasets. We identify a phenomenon we term quantization-induced bias flipping, in which quantization causes models to change responses from biased to unbiased and vice versa, up to 21% of the time, despite no change in aggregate bias scores. These flips are strongly associated with model uncertainty, where the responses with high uncertainty are 3-11x more likely to change than the confident ones. Quantization strength amplifies this effect, with 4-bit quantized models exhibiting 4-6x more behavioral changes than 8-bit quantized models. Critically, these changes create asymmetric impacts across demographic groups, where bias can worsen by up to 18.6% for some groups while improving by 14.1% for others, yielding misleadingly neutral aggregate outcomes. Larger models show no consistent robustness advantage, and group-specific shifts vary unpredictably across model families. Our findings demonstrate that compression fundamentally alters bias patterns, requiring crucial post-quantization evaluation and interventions to ensure reliability in practice.

Vision-Language Models (VLMs) achieve strong multimodal performance but are costly to deploy, and post-training quantization often causes significant accuracy loss. Despite its potential, quantization-aware training for VLMs remains underexplored. We propose GRACE, a framework unifying knowledge distillation and QAT under the Information Bottleneck principle: quantization constrains information capacity while distillation guides what to preserve within this budget. Treating the teacher as a proxy for task-relevant information, we introduce confidence-gated decoupled distillation to filter unreliable supervision, relational centered kernel alignment to transfer visual token structures, and an adaptive controller via Lagrangian relaxation to balance fidelity against capacity constraints. Across extensive benchmarks on LLaVA and Qwen families, our INT4 models consistently outperform FP16 baselines (e.g., LLaVA-1.5-7B: 70.1 vs. 66.8 on SQA; Qwen2-VL-2B: 76.9 vs. 72.6 on MMBench), nearly matching teacher performance. Using real INT4 kernel, we achieve 3$\times$ throughput with 54% memory reduction. This principled framework significantly outperforms existing quantization methods, making GRACE a compelling solution for resource-constrained deployment. Code and data are available at: https://github.com/ForeverBlue816/GRACE.