Quantization

LLM quantization has become essential for memory-efficient deployment. Recent work has shown that quantization schemes can pose critical security risks: an adversary may release a model that appears benign in full precision but exhibits malicious behavior once quantized by users. However, existing quantization-conditioned attacks have been limited to relatively simple quantization methods, where the attacker can estimate weight regions that remain invariant under the target quantization. Notably, prior attacks have consistently failed to compromise more popular and sophisticated schemes, limiting their practical impact. In this work, we introduce the first quantization-conditioned attack that consistently induces malicious behavior that can be triggered by a broad range of advanced quantization techniques, including AWQ, GPTQ, and GGUF I-quants. Our attack exploits a simple property shared by many modern quantization methods: large outliers can cause other weights to be rounded to zero. Consequently, by injecting outliers into specific weight blocks, an adversary can induce a targeted, predictable weight collapse in the model. This effect can be used to craft seemingly benign full-precision models that exhibit a wide range of malicious behaviors after quantization. Through extensive evaluation across three attack scenarios and LLMs, we show that our attack achieves high success rates against a broad range of quantization methods on which prior attacks fail. Our results demonstrate, for the first time, that the security risks of quantization are not restricted to simpler schemes but are broadly relevant across complex, widely-used quantization methods.

Standard unlearning evaluations measure behavioral suppression in full precision, immediately after training, despite every deployed language model being quantized first. Recent work has shown that 4-bit post-training quantization can reverse machine unlearning; we show this is not a tuning artefact but a systematic dual failure: gradient-based methods that achieve meaningful forgetting lose it under compression, while methods that survive quantization barely change the model. Both failures trace to the same root cause: across all baselines, per-parameter updates lie 47-828x below the NF4 quantization bin width; updates diffused across billions of parameters cannot clear quantization bin boundaries, a consequence we formalize as a sparsity-permanence tradeoff. We present MANSU (Mechanistic-Aligned Null-Space Unlearning), which resolves both modes by combining causal circuit attribution to isolate the minimal forget-set subgraph, circuit-restricted null-space projection with a diagonal-Fisher retain bound, and a per-parameter magnitude floor guaranteeing quantization survival by construction. We additionally introduce Circuit Attribution Divergence (CAD), a mechanistic verification metric distinguishing structural erasure from behavioral suppression, a distinction existing metrics cannot make. Across multiple model families and hazard benchmarks, MANSU is the first method to jointly satisfy all four properties with margin on each (meaningful forgetting, retain preservation, non-positive PTQ gap, and structural erasure), while gradient-based baselines recover up to +0.05 accuracy under compression.

Vector quantization is a fundamental tool for compressing high-dimensional embeddings, yet existing multi-codebook methods rely on static codebooks that limit expressiveness under heterogeneous data geometry. While recent dynamic quantizers like QINCo adapt codebooks to individual inputs and improve expressiveness, their strict sequential dependencies create decoding bottlenecks. We propose Residual Quantization via Mixture of Experts (RQ-MoE), a framework combining a two-level MoE with dual-stream quantization to enable input-dependent codebook adaptation for efficient vector quantization. RQ-MoE enables dynamic codebook construction and decouples instruction from quantization, facilitating parallel decoding. Theoretically, we show that standard Residual Quantization and QINCo can be recovered as constrained special cases of RQ-MoE, and derive a guideline for setting expert dimensionality in RQ-MoE. Extensive experiments show that RQ-MoE achieves state-of-the-art or on-par performance in reconstruction and retrieval, while providing 6x-14x faster decoding than prior vector quantization methods. The implementation is available at https://github.com/KDEGroup/RQ-MoE.

Vector quantization via random projection followed by scalar quantization is a fundamental primitive in machine learning, with applications ranging from similarity search to federated learning and KV cache compression. While dense random rotations yield clean theoretical guarantees, they require $Θ(d^2)$ time. The randomized Hadamard transform $HD$ reduces this cost to $O(d \log d)$, but its discrete structure complicates analysis and leads to weaker or purely empirical compression guarantees. In this work, we study a variant of this approach: dithered quantization with a single randomized Hadamard transform. Specifically, the quantizer applies $HD$ to the input vector and subtracts a random scalar offset before quantizing, injecting additional randomness at negligible cost. We prove that this approach is unbiased and provides mean squared error bounds that asymptotically match those achievable with truly random rotation matrices. In particular, we prove that a dithered version of TurboQuant achieves mean squared error $\bigl(π\sqrt{3}/2 + o(1)\bigr) \cdot 4^{-b}$ at $b$ bits per coordinate, where the $o(1)$ term vanishes uniformly over all unit vectors and all dimensions as the number of quantization levels grows.

Vector Quantized Variational Autoencoder (VQ-VAE) has become a fundamental framework for learning discrete representations in image modeling. However, VQ-VAE models must tokenize entire images using a finite set of codebook vectors, and this capacity limitation restricts their ability to capture rich and diverse representations. In this paper, we propose ArcCosine Additive Margin VQ-VAE (ArcVQ-VAE), a novel vector quantization framework that introduces a spherical angular-margin prior (SAMP) for the codebook of a conventional VQ-VAE. The proposed SAMP consists of Ball-Bounded Norm Regularization, which constrains all codebook vectors within a time-dependent Euclidean ball, and ArcCosine Additive Margin Loss, which encourages greater angular separability among latent vectors. This formulation promotes more discriminative and uniformly dispersed latent representations within the constrained space, thereby improving effective latent-space coverage and leading to improved codebook utilization. Experimental results on standard image reconstruction and generation tasks show that ArcVQ-VAE achieves competitive performance against baseline models in terms of reconstruction accuracy, representation diversity, and sample quality. The code is available at: https://github.com/goals4292/ArcVQ-VAE

Quantization has emerged as a standard technique for accelerating inference for generative models by enabling faster low-precision computations and reduced memory transfers. Recently, GPU accelerators have added first-class support for microscaling Block Floating Point (BFP) formats. Standard BFP algorithms use a fixed scale based on the maximum magnitude of the block. We observe that this scale choice can be suboptimal with respect to quantization errors. In this work, we propose ScaleSearch, an alternative strategy for selecting these scale factors: using a fine-grained search leveraging the mantissa bits in microscaling formats to minimize the quantization error for the given distribution. ScaleSearch can be integrated with existing quantization methods such as Post Training Quantization and low-precision attention, and is shown to improve their performance. Additionally, we introduce ScaleSearchAttention, an accelerated NVFP4-based attention algorithm, which uses ScaleSearch and adapted prior techniques to ensure near-0 performance loss for causal language modeling. Experiments show that ScaleSearch reduces quantization error by 27% for NVFP4 and improves language model PTQ by up to 15 points for MATH500 (Qwen3-8B), while ScaleSearchAttention improves Wikitext-2 PPL by upto 0.77 points for Llama 3.1 70B. The proposed methods closely match baseline performance while providing quantization accuracy improvements.

A major recent advance in quantization is given by microscaled 4-bit formats such as NVFP4 and MXFP4, quantizing values into small groups sharing a scale, assuming a fixed floating-point grid. In this paper, we study the following natural extension: assume that, for each group of values, we are free to select the "better" among two or more 4-bit grids marked by one or more bits in the scale value. We formalize the power-of-two-grids (PO2) problem, and provide theoretical results showing that practical small-group formats such as MXFP or NVFP can benefit significantly from PO2 grids, while the advantage vanishes for very large groups. On the practical side, we instantiate several grid families, including 1) PO2(NF4), which pairs the standard NF4 normal grid with a learned grid, 2) MPO2, a grid pair that is fully learned over real weights and activations, 3) PO2(Split87), an explicit-zero asymmetric grid and 4) SFP4, a TensorCore-implementable triple which pairs NVFP4 with two shifted variants. Results for post-training quantization of standard open models and pre-training of Llama-like models show that adaptive grids consistently improve accuracy vs single-grid FP4 under both weight-only and weight+activation. Source code is available at https://github.com/IST-DASLab/GridGames.

NVFP4 has recently emerged as an efficient 4-bit microscaling format for large language models (LLMs), offering superior numerical fidelity with native hardware support. However, existing methods often yield suboptimal performance due to inflexible scale selection and the coupled treatment of quantization and dequantization scales. To address these issues, we propose Scale Optimization for Accurate Reconstruction (SOAR), a novel post-training quantization framework that improves the accuracy of NVFP4 quantization. At its core, SOAR features Closed-form Joint Scale Optimization (CJSO), which jointly optimizes global and block-wise scales via analytical solutions derived from reconstruction error minimization. Furthermore, it incorporates Decoupled Scale Search (DSS). DSS decouples the high-precision quantization scale from its constrained dequantization counterpart, and performs discrete search to mitigate precision loss from scale quantization. Extensive experiments across multiple LLMs show that our method consistently outperforms existing NVFP4 quantization baselines, achieving superior accuracy under the same memory footprint with no additional hardware overhead. The code and models will be available at https://github.com/steven-bao1/SOAR.

The Muon optimizer has emerged as a compelling alternative to Adam for training large language models, achieving remarkable computational savings through gradient orthogonalization. However, Muon's optimizer state is more sensitive to quantization errors: because the orthogonalization discards the magnitudes of singular values and retains only directional information, even small quantization errors in singular vector directions are amplified in the update. In this work, we propose MuonQ, a low-bit Muon training framework built on the principle of directional fidelity optimization. First, we apply a pre-quantization normalization so that each step introduces quantization errors of the same magnitude, preventing the accumulated error from developing a preferred direction. Second, we introduce a structural decomposition that separately quantizes the dominant singular components via power iteration, ensuring that quantization errors perturb only singular value magnitudes rather than rotating singular vector directions. Third, we adopt $μ$-law companding quantization to allocate higher resolution to densely packed momentum values, shifting the quantization objective from outlier preservation to dense-region distinguishability. Together, these techniques enable stable 4-bit quantization of Muon's optimizer states. Pre-training experiments on GPT-style and LLaMA-style models demonstrate that MuonQ at 4-bit precision closely matches full-precision Muon in both training loss and downstream task accuracy, while reducing optimizer state memory by up to 7.3 $\times$. Our code is available at https://github.com/YupengSu/MuonQ.

Quantization is an effective strategy to reduce the storage and computation footprint of large language models (LLMs). Post-training quantization (PTQ) is a leading approach for compressing LLMs. Popular weight quantization procedures, including GPTQ and RTN, suffer in model utility, especially at aggressive quantization levels (sub-4-bit). We propose ADMM-Q, a novel weight quantization algorithm that considers the layer-wise quantization problem. Our algorithm is based on a combinatorial variant of the Alternating Direction Method of Multipliers (ADMM). Our operator-splitting procedure updates weights continuously to minimize the layer-wise reconstruction error, while gradually enforcing the quantization constraints with convergence guarantees. We propose additional algorithmic enhancements (e.g., penalty scheduling, preconditioning, and a local search post-processing step) to make ADMM-Q efficient at LLM scale. ADMM-Q is modular and can be used as a drop-in replacement for any weight quantizer within existing quantization pipelines: ADMM-Q is fully composable with existing techniques including range clipping, learned or random rotations, and activation scaling. Using ADMM-Q in place of GPTQ on Qwen3-8B, we decrease WikiText-2 perplexity in: (i) the W3A16 weight-only setting (12.85 $\rightarrow$ 10.06); (ii) the W4A8 SmoothQuant procedure (9.29 $\rightarrow$ 8.68); and (iii) the W2A4KV4 SpinQuant procedure (66.11 $\rightarrow$ 19.42).

Trellis-coded quantization sets the current 2-bit post-training frontier for LLMs (QTIP), but pushing below the PTQ ceiling requires quantization-aware training, and QAT on a trellis is obstructed by the non-differentiable Viterbi argmax. We introduce BCJR-QAT, a relaxation that replaces the argmax with the BCJR forward-backward sum-product algorithm at temperature $T$, producing a soft codeword equal to the Boltzmann expectation over trellis paths, exactly differentiable, recovering the hard QTIP code as $T \to 0$, and mathematically identical to the transfer-matrix computation for a 1D Ising-like spin chain. We contribute (i) a fused Triton kernel making BCJR tractable on a single consumer GPU ($6.57\times$ speedup, fp32 parity); (ii) a quantitative drift-budget theory of when BCJR-QAT can escape the QTIP-PTQ Voronoi basin, verified across four experiments; and (iii) a positive empirical result on Llama-3.2-1B at 2 bpw under end-to-end forward-KL distillation: with the right schedule (skip the high-$T$ phase to avoid an overshoot we diagnose), single-layer BCJR-QAT beats QTIP-PTQ by $\mathbf{-0.084}$ PPL on WikiText-2, and multi-layer compounding is super-additive.

Post-training quantization has emerged as a widely adopted technique for compressing and accelerating the inference of Large Language Models (LLMs). The primary challenges in LLMs quantization stem from activation outliers, which significantly degrade model performance especially at lower bit precision. While recent approaches attempt to mitigate outliers through linear transformations across feature dimensions, our analysis reveals that the transformed weights and activations still exhibit persistent outlier patterns with concentrated magnitude distributions. In this paper, we first model the mathematical relationship between quantization error and outliers, and then introduce a new metric Flatness to quantify the distribution of outliers. Based on this, we derive the theoretical optimal solution with respect to Flatness. Building on these insights, we propose Bidirectional Diagonal Quantization (BDQ), a novel post-training quantization framework that effectively disperses outlier patterns through optimized matrix transformations. BDQ strategically distributes outlier magnitudes across matrix dimensions via learned diagonal operations. Extensive experiments demonstrate that BDQ establishes a new quantization benchmark. It achieves less than 1% accuracy drop in W4A4 quantization on the LLaMA-3-8B model. In the more challenging W2A4KV16 experiment, compared to state-of-the-art approaches, BDQ reduces the performance gap by 39.1% on the DeepSeek-R1-Distill-LLaMA-70B model.

Mixture-of-Experts (MoE) models achieve remarkable performance by sparsely activating specialized experts, yet their massive parameters in experts pose significant challenges for deployment. While low-rank quantization offers a promising route to compress MoE models, existing methods still incur nonnegligible memory overhead and inference latency. To address these limitations, we propose \textsc{TileQ}, a fine-tuning-free post-training quantization (PTQ) method that employs 2D-tiling structured low-rank quantization to share low-rank factors across both input and output dimensions of MoE experts. Furthermore, we introduce an efficient inference technique for \textsc{TileQ} that fuses multiple low-rank expert computations into a single-pass operation, significantly improving hardware utilization. Experiments show that \textsc{TileQ} cuts down additional memory usage up to 10$\times$ and reduces inference latency to $\sim$5% while preserving state-of-the-art accuracy.

Large reasoning models (LRMs) reach competition-level math and coding accuracy via long autoregressive decoding, making per-token decoding cost a primary deployment concern. Weight quantization is the standard tool for acceleration, but representative recipes -- including state-of-the-art end-to-end (E2E) QAT -- lose accuracy on long-decoding reasoning benchmarks despite preserving perplexity and short-decode accuracy. Through a systematic gradient-direction analysis, we identify two factors driving this gap: (i) KV-cache fidelity preservation under the QAT loss, which E2E supervision attenuates via the softmax Fisher metric; and (ii) Hessian-subspace alignment between calibration data and the deployment distribution. We propose LookAhead Quantization (LAQuant), a layer-wise weight-only QAT method that addresses both factors without online-transform overhead by combining reasoning-domain calibration with a one-layer lookahead loss whose implicit cross-layer co-adaptation preserves the next-layer residual stream. For Qwen3-4B under W3G128 quantization, LAQuant improves AIME25 Pass@1 over ParoQuant by 15.11pp (1.93pp over ParoQuant++ at matched calibration) while achieving a 3.42x decoding speedup over FP16 on RTX A6000, compared with ParoQuant's 3.01x.

Large language models (LLMs) have shown strong performance across diverse tasks, but their inference with long input contexts is bottlenecked by memory size and bandwidth. The Key-Value (KV) cache size grows linearly with sequence length and needs to be re-read from off-chip high-bandwidth memory (HBM) to on-chip memory at every decoding step, resulting in memory-bound inference. Existing methods reduce the cache by either eviction or quantization, but typically treat the two in isolation. In this paper, we cast KV cache compression as a rate-distortion problem, under which eviction and quantization are two end-points of the same bit allocation scheme. This exposes the need to optimize them jointly, motivating our method, RDKV (Rate-Distortion KV cache compression). RDKV derives the weight of each token or channel from the distortion that compression induces on the attention computation. Based on these weights, it assigns each token or channel a bit-width ranging from full precision down to zero bits guided by reverse water-filling, applied once after the prefilling stage. Experiments on LongBench, RULER, and InfiniteBench show that RDKV outperforms the best evaluated baseline by 9.1% on average. On LongBench it recovers 97.81% of full-cache accuracy with only 2.48% cache retention. Compared with full-cache FlashAttention-2 decoding, it achieves 4.5x decode speedup and 1.9x peak memory reduction with 128K context length, while maintaining comparable performance.

Looped language models (LoopLMs) improve parameter efficiency by recursively reusing Transformer blocks, enabling deeper computation under a fixed model size. However, this reuse makes LoopLMs more fragile under post-training quantization (PTQ). We present the first systematic study of quantization in LoopLMs and identify three challenges: distribution shift across roles, state reuse across loop transitions, and recursive error accumulation. To address these challenges, we propose LoopQ, a loop-aware PTQ framework that preserves a shared quantized backbone while introducing lightweight adaptations. LoopQ combines activation scaling, selective transformation, cross-loop state alignment, and trajectory-aware optimization to reduce distributional mismatch within loops and error accumulation across loops. Experiments across seven benchmarks show that, under W4A4 quantization, LoopQ improves average downstream accuracy by 68.8% and reduces average perplexity by 87.7% compared with the strongest static PTQ baseline.

KV-cache quantization is framed as a quality--latency trade-off. We show it is \emph{inverted} on Apple Silicon's unified memory: a single fused Metal kernel (sign-randomized FFT $+$ per-channel $λ$ $+$ per-group abs-max $+$ int4 nibble pack), exposed as a HuggingFace \texttt{Cache} subclass, runs \emph{faster than fp16} across $256$--$4096$-token prefixes on Gemma-3 1B ($-3$ to $-8\%$ ms/tok) and at short context on Qwen2.5-1.5B ($-0.7$ to $-2.6\%$ through $1$K), with $3\times$ persistent memory compression and quality preserved ($\dPPL = 0.000$ Qwen short-prompt; $+3.6$ hook $\dPPL$ Gemma). The kernel's $\sim\!25$,ns/vec overhead is below the bandwidth savings from $3\times$ compression. The fused kernel also closes Qwen's 4-bit per-token catastrophe ($\dPPL = +7975 \to +638.6$, $12.5\times$ reduction) at $182$,GFLOPS / $D{=}128$. Supporting findings: $\SRFT$ and $\SRHT$ are statistically indistinguishable for KV quality (we pick $\SRFT$ for mixed-radix and matrix-multiply alignment); a learned-rotation ablation surfaces a regularization role for the fixed random SRFT base (learning $R+λ$ without SRFT lowers calibration MSE $84.9\%$ vs $50.3\%$ but yields worse PPL); Householder rotations at $k{=}d/2$ reflectors are effectively lossless at $d{=}256$.

Post-training quantization (PTQ) is an effective approach for deploying large language models (LLMs) under memory and latency constraints. Most existing PTQ methods determine quantization parameters by minimizing a layer-wise reconstruction error on a predetermined calibration dataset, typically optimized via either scale search or Gram-based methods. However, from the perspective of generalization risk, existing PTQ calibration objectives based solely on empirical reconstruction error over limited or unrepresentative calibration data may move the quantized weights away from the original floating-point weights, potentially degrading downstream performance. To address this issue, we propose \emph{Regularized Quantization Calibration} (RQC), a unified framework that augments standard PTQ objectives with a regularizer that explicitly controls weight deviation from the original weights. We further generalize this framework to incorporate a saliency-aware regularizer, resulting in \emph{Saliency-Aware Regularized Quantization Calibration} (SARQC). The proposed regularization encourages quantized weights to remain close to the original weights during calibration, leading to improved generalization at inference time. SARQC integrates seamlessly into existing PTQ pipelines and enhances both scale-search-based and Gram-based methods under a unified formulation. Extensive experiments on dense and Mixture-of-Experts LLMs demonstrate consistent improvements in perplexity and zero-shot accuracy, without introducing additional inference overhead.

3D Gaussian splatting (3DGS) is a state-of-the-art representation for real-time photorealistic novel-view synthesis, yet a single high-fidelity scene typically occupies hundreds of megabytes to several gigabytes, exceeding the budgets of mobile, immersive, and volumetric video platforms. Existing 3DGS compression methods (e.g., HAC++, FlexGaussian, LP-3DGS) treat pruning, quantization, and entropy coding as separate stages and rely on hand-tuned heuristics (opacity thresholds, fixed bit-widths, SH truncation), limiting cross-scene generalization and preventing users from specifying a target rate or quality budget. We propose GETA-3DGS, to our knowledge the first end-to-end automatic joint structured pruning and quantization framework for 3DGS. Building on GETA for joint pruning-quantization of deep networks, we contribute: (i) a 3DGS-aware quantization-aware dependency graph (QADG) treating each Gaussian primitive as a group with five attribute sub-nodes and degree-aware SH sub-nodes; (ii) a render-aware saliency fusing transmittance-weighted contribution, screen-space gradient, and pixel coverage into a Gaussian-level importance score; and (iii) a heterogeneous per-attribute mixed-precision scheme co-optimized with structural sparsity under a projected partial saliency-guided (PPSG) descent guarantee. On Mip-NeRF 360, Tanks and Temples, and Deep Blending, GETA-3DGS operates directly on raw Gaussian primitives rather than a post-hoc anchor representation, delivering ~5x storage reduction over Vanilla 3DGS with no per-scene thresholds. Bit-width policy is the dominant rate-distortion lever: a uniform 6-bit cap costs up to -6.74 dB on view-dependent scenes versus our heterogeneous allocation, matching an information-theoretic reverse-water-filling analysis we develop. GETA-3DGS is complementary to existing codecs: entropy coding (HAC++, CompGS) is downstream, so the two can be composed.

Large Language Models are routinely compressed via post-training quantization to reduce inference costs and memory footprint for cloud and edge deployment, yet the impact of this compression on model quality remains poorly understood. Existing studies typically compare only two conditions (full-precision vs. a single quantized variant), rely on aggregate bias metrics, and evaluate a single model family, making it impossible to distinguish gradual degradation from threshold-dependent safety failures. We conduct a controlled empirical study of three instruction-tuned models (Qwen2.5-7B, Mistral-7B, Phi-3.5-mini) at five precision levels (BF16 through 3-bit) on 12,148 BBQ bias benchmark items across 5 random seeds, totaling 911,100 inference records. Our results reveal that 3-bit quantization causes 6-21% of previously unbiased items to develop new stereotypical behaviors, following a clear dose-response pattern confirmed via logistic regression, while models' willingness to select "unknown" answers declines by 17.4%. Crucially, these item-level changes are invisible to standard quality metrics: perplexity increases by less than 0.5% at 8-bit and under 3% at 4-bit across all three models, yet 2.5-5.6% of items already develop new biases at 4-bit. These findings demonstrate that aggregate evaluation metrics systematically miss fairness-critical degradation, underscoring the need for quality-aware compression protocols that explicitly test for bias emergence before deployment.

FlashAttention improves efficiency through tiling, but its online softmax still relies on floating-point arithmetic for numerical stability, making full quantization difficult. We identify three main obstacles to integer-only FlashAttention: (1) scale explosion during tile-wise accumulation, (2) inefficient shift-based exponential operations on GPUs, and (3) quantization granularity constraints requiring uniform scales for integer comparison. To address these challenges, we propose \textit{QFlash}, an end-to-end integer FlashAttention design that performs softmax entirely in the integer domain and runs as a single Triton kernel. On seven attention workloads from ViT, DeiT, and Swin models, QFlash achieves up to 6.73$\times$ speedup over I-ViT and up to 8.69$\times$ speedup on Swin, while reducing energy consumption by 18.8% compared to FP16 FlashAttention, without sacrificing Top-1 accuracy on ViT/DeiT and remaining competitive on Swin under per-tensor quantization. Our code is publicly available at https://github.com/EfficientCompLab/qflash.

Post-Training Quantization (PTQ) compresses large language models to low bit-widths using a small calibration set, and its quality depends strongly on which samples are chosen. We identify a failure mode in which calibration samples fail to activate outlier channels, hidden dimensions with unusually large activations, causing the quantizer to underestimate their dynamic range and producing per-channel reconstruction errors that dominate layer-wise loss. Motivated by this observation, we argue that PTQ calibration quality is governed more by weighted outlier-channel coverage than by generic sample representativeness, and formulate calibration selection as a weighted set cover problem over outlier channels. The objective is monotone submodular, and the greedy algorithm, COVERCAL, operates on pre-computed activation statistics and requires no GPU time at selection. We further show that the weight choice is internally consistent: under a stylized clipping model, missed weighted coverage upper-bounds surrogate loss, justifying the weighted coverage objective as principled rather than purely empirical. Across LLaMA-2, LLaMA-3, and Mistral, under AWQ and GPTQ backends and five downstream evaluations, COVERCAL improves over random, max-perplexity, max-activation-variance, and stratified baselines, with the largest gains at small calibration budgets. At INT4 with 128 samples, COVERCAL improves MMLU by 1.2 to 1.5 points over random calibration and reduces perplexity degradation by 15 to 30%; with 64 samples, it matches or exceeds random calibration at 256. The contribution is not a new PTQ backend but a formulation of calibration selection as weighted outlier coverage, with a simple, efficient algorithm and a surrogate-based justification.

High-capacity associative memories based on Kernel Logistic Regression (KLR) achieve strong retrieval performance but typically require substantial computational resources. This paper investigates the compressibility of KLR Hopfield networks to clarify the geometric principles underlying their robust representations. We present a geometric interpretation based on spontaneous symmetry breaking and Walsh analysis, and examine it through compression experiments involving quantization and pruning. The experiments reveal a clear asymmetry: the network remains robust under low-precision quantization while exhibiting strong sensitivity to pruning. We interpret this behavior through a "sparse function, dense representation" principle, in which a sparse input mapping is implemented through a dense bimodal parameterization. These findings suggest a practical route toward hardware-efficient kernel associative memories and provide insight into the geometric principles underlying robust representation in neural systems.

Efficient single-image super-resolution (SISR) requires balancing reconstruction fidelity, model compactness, and robustness under low-bit deployment, which is especially challenging for x3 SR. We present a deployment-oriented quantized SISR framework based on an extract-refine-upsample design. The student performs most computation in the low-resolution space and uses a lightweight re-parameterizable backbone with PixelShuffle reconstruction, yielding a compact inference graph. To improve quality without significantly increasing complexity, we adopt a three-stage training pipeline: Stage 1 learns a basic reconstruction mapping with spatial supervision; Stage 2 refines fidelity using Charbonnier loss, DCT-domain supervision, and confidence-weighted output-level distillation from a Mamba-based teacher; and Stage 3 applies quantization-aware training directly on the fused deploy graph. We further use weight clipping and BatchNorm recalibration to improve quantization stability. On the MAI 2026 Quantized 4K Image Super-Resolution Challenge test set, our final AIO MAI submission achieves 29.79 dB PSNR and 0.8634 SSIM, obtaining a final score of 1.8 under the target mobile INT8 deployment setting. Ablation on Stage 3 optimization shows that teacher-guided supervision improves the dynamic INT8 TFLite reconstruction from 29.91 dB/0.853 to 30.0003 dB/0.856, while the fixed-shape deployable INT8 TFLite artifact attains 30.006 dB/0.857.

Large language models cache all previously computed key-value (KV) pairs during generation, and this KV cache grows linearly with sequence length, making it a primary memory bottleneck for serving. Quantizing the KV cache to fewer bits reduces this cost, yet all current quantizers assign the same bit-width to every attention head, ignoring the large variation in head importance. A natural idea is to allocate more bits to important heads and fewer to the rest. We show, however, that such mixed-precision allocation has a hidden pitfall: each quantizer follows a different distortion curve D(b)=alpha*beta^{-b}, and the decay rate beta varies from 3.6 to 5.3 across quantizer designs. Applying one quantizer's distortion model to another inverts the allocation order and makes performance worse than uniform quantization. We call this failure mode distortion model mismatch and propose RateQuant to resolve it. RateQuant fits a per-quantizer distortion model from a small calibration set, then solves the resulting bit-allocation problem in closed form via reverse waterfilling from rate-distortion theory. On Qwen3-8B at 2.5 average bits, calibrated RateQuant reduces KIVI's perplexity from 49.3 to 14.9 (70% reduction) and improves QuaRot by 6.6 PPL. The entire calibration takes 1.6 s on a single GPU and adds zero overhead at inference time.

Auto-regressive Large Language Models (LLMs) achieve strong performance on coding tasks, but incur high memory and inference costs. Diffusion-based language models (d-LLMs) offer bounded inference cost via iterative denoising, but their behavior under post-training quantization (PTQ) has been sparsely explored. We investigate the application and robustness of PTQ techniques, specifically GPTQ and a modified Hessian-Aware Quantization (HAWQ) algorithm, on a diffusion-based coding LLM (CoDA) and observe that these methods applied to CoDA exhibit greater robustness at low bitwidths compared to Qwen3-1.7B, its auto-regressive counterpart, under a standardized evaluation pipeline. We find that in our setup, CoDA exhibits greater robustness at low bitwidths (2-4 bits), with smaller accuracy degradation across HumanEval and MBPP benchmarks. Additionally, mixed-precision configurations derived from HAWQ provide smooth trade-offs across accuracy, latency, and memory. The results suggest that diffusion LLMs may offer advantages for efficient deployment due to more quantization-resilience.

Post-Training Quantization (PTQ) is critical for the efficient deployment of Large Language Models (LLMs). While 4-bit quantization is widely regarded as an optimal trade-off, reducing the precision to 2-bit usually triggers a catastrophic ``performance cliff.'' It remains unclear whether the underlying mechanisms differ fundamentally. Consequently, we conduct a systematic mechanistic analysis, revealing two qualitatively distinct failure modes: Signal Degradation, where the computational patterns remain intact but information precision is impaired by cumulative error; and Computation Collapse, where key components fail to function, preventing correct information processing and destroying the signal in the early layers. Guided by this diagnosis, we conduct mechanism-aware interventions, demonstrating that targeted, training-free repair can mitigate Signal Degradation, but remains ineffective for Computation Collapse. Our findings provide a systematic diagnostic framework for PTQ failures and suggest that addressing Computation Collapse requires structural reconstruction rather than mere compensation.

KV-cache memory is a major bottleneck in real-world LLM serving, where systems must simultaneously support latency-sensitive small-batch requests and high-throughput concurrent workloads. Although many KV-cache compression methods improve offline accuracy or compression ratio, they often violate practical serving constraints such as paged memory layouts, regular memory access, and fused attention execution, limiting their effectiveness in deployment. In this work, we identify the minimal set of 4-bit KV-cache quantization methods that remain viable under these constraints. Our central finding is that a simple design--token-wise INT4 quantization with block-diagonal Hadamard rotation--consistently achieves the best accuracy-efficiency trade-off. Across multiple models and benchmarks, this approach recovers nearly all of the accuracy lost by naive INT4, while more complex methods such as vector quantization and Hessian-aware quantization provide only marginal additional gains once serving compatibility is taken into account. To make this practical, we implement a fused rotation-quantization kernel that integrates directly into paged KV-cache layouts and introduces zero measurable end-to-end overhead, matching plain INT4 throughput across concurrency levels. Our results show that effective KV-cache compression is fundamentally a systems co-design problem: under real serving constraints, lightweight block-diagonal Hadamard rotation is a viable method that delivers near-lossless accuracy without sacrificing serving efficiency.

Large-scale dataset distillation requires storing auxiliary soft labels that can be 30-40x larger on ImageNet-1K and 200x larger on ImageNet-21K than the condensed images, undermining the goal of dataset compression. We identify two fundamental issues necessitating such extensive labels: (1) insufficient image diversity, where high within-class similarity in synthetic images requires extensive augmentation, and (2) insufficient supervision diversity, where limited variety in supervisory signals during training leads to performance degradation at high compression rates. To address these challenges, we propose Label Pruning and Quantization for Large-scale Distillation (LPQLD). We enhance image diversity via class-wise batching and batch-normalization supervision during synthesis. For supervision diversity, we introduce Label Pruning with Dynamic Knowledge Reuse to improve label-per-augmentation diversity, and Label Quantization with Calibrated Student-Teacher Alignment to improve augmentation-per-image diversity. Our approach reduces soft label storage by 78x on ImageNet-1K and 500x on ImageNet-21K while improving accuracy by up to 7.2% and 2.8%, respectively. Extensive experiments validate the superiority of LPQLD across different network architectures and dataset distillation methods. Code is available at https://github.com/he-y/soft-label-pruning-quantization-for-dataset-distillation.

Post-training quantization (PTQ) is essential for deploying large diffusion transformers on resource-constrained hardware, but aggressive 4-bit quantization significantly degrades generative performance. Low-rank approximation methods have emerged as a promising solution by appending auxiliary linear branches to restore performance. However, current state-of-the-art approaches assume these branches must retain high precision (W16A16) and rely on heavy, data-dependent calibration for initialization. We challenge both limitations with LoRaQ (Low-Rank Approximated Quantization), a simple, data-free calibration approach that optimizes quantization error compensation. By overcoming the need for high-precision branches, LoRaQ enables the first fully sub-16 bit pipeline, allowing the low-rank branch itself to be quantized. We demonstrate that, at equal memory overhead, LoRaQ outperforms the state-of-the-art methods in their native implementations on Pixart-$Σ$ and SANA. We also analyze mixed-precision configurations, showing that setups such as W8A8, W6A6, and W4A8 for the low-rank branch, alongside a W4 main layer, yield superior results while maintaining a fully quantized architecture compatible with modern mixed-precision hardware.

The MXFP4 microscaling format, which partitions tensors into blocks of 32 elements sharing an E8M0 scaling factor, has emerged as a promising substrate for efficient LLM inference, backed by native hardware support on NVIDIA Blackwell Tensor Cores. However, activation outliers pose a unique challenge under this format: a single outlier inflates the shared block scale, compressing the effective dynamic range of the remaining elements and causing significant quantization error. Existing rotation-based remedies, including randomized Hadamard and learnable rotations, are data-agnostic and therefore unable to specifically target the channels where outliers concentrate. We propose DuQuant++, which adapts the outlier-aware fine-grained rotation of DuQuant to the MXFP4 format by aligning the rotation block size with the microscaling group size (B{=}32). Because each MXFP4 group possesses an independent scaling factor, the cross-block variance issue that necessitates dual rotations and a zigzag permutation in the original DuQuant becomes irrelevant, enabling DuQuant++ to replace the entire pipeline with a single outlier-aware rotation, which halves the online rotation cost while simultaneously smoothing the weight distribution. Extensive experiments on the LLaMA-3 family under MXFP4 W4A4 quantization show that DuQuant++ consistently achieves state-of-the-art performance. Our code is available at https://github.com/Hsu1023/DuQuant-v2.

Deep learning models are the most efficient models in many machine learning tasks. The main disadvantage when using them in IoT, mobile devices, independent autonomous or real-time systems is their complexity and memory size. Therefore, much research has concentrated on compression techniques of deep learning architectures. One of the most popular technique is quantization. In most of the works, the quantization is done based on the nearest neighbour quantization technique. This work focuses on improving the quantization efficiency in pretrained and quantized models. This approach has the potential to improve the final accuracy of quantized models. The main postulate of the work is that final quantization states of the network based on nearest neighbour rounding does not guarantee optimal accuracy. In the presented work, the evolution strategy is used as an optimization approach. The evolution in each iteration changes the values of the small percentage of weights. It shifts theirs values to different quantization states. The work shows that proposed evolution with an appropriate set of operators and parameters can fast improve the accuracy of the quantized models. The results are presented for popular architectures such as VGG and Resnet for image classification and detection. Additionally, simulations were carried out for the autoencoder architecture.

Deploying Vision-Language Models (VLMs) under aggressive low-bit inference remains challenging because inference cost is dominated by the long visual-token prefix during prefill and the growing KV cache during autoregressive decoding. Token pruning and low-bit quantization are complementary for reducing these costs, yet naive stage-wise combinations are often brittle due to a mismatch between quantization calibration and pruning execution. We present a collaborative quantization-and-pruning framework that unifies low-bit inference and deterministic visual-token pruning in a single deployable pipeline. The framework introduces the \textbf{Q}uantization \textbf{U}nified \textbf{O}ffline \textbf{T}oken \textbf{A}llocator (\textbf{QUOTA}), which converts low-bit calibration signals into a layer-wise token allocation schedule and materializes it as a pruning recipe. Token importance is evaluated under deployed W4A4 operators with a quantized KV cache by combining activation magnitude, attention cues, and an explicit low-bit risk signal, enabling consistent budgeted top-$k$ selection. Experiments on standard VLM benchmarks show improved robustness over stage-wise baselines under the same low-bit regime, achieving 95.65% average retention while retaining only 30% of visual tokens, compared with about 94.3% retention for representative stage-wise combinations. The code will be released.

Supervised Fine-Tuning (SFT) accelerates taskspecific large language models (LLMs) development, but the resulting proliferation of finetuned models incurs substantial memory overhead. Delta compression addresses this by retaining a single pre-trained LLM with multiple compressed delta weights. However, existing methods fail on models fine-tuned with largescale datasets. We find that larger SFT data scale amplifies delta parameter magnitude, singular values, and entropy, exacerbating compression errors. To tackle this, we propose DQRELO (Delta Compression via Quantization and Residual Low-Rank), a novel training- and data-free delta compression method. It combines coarse-grained one-bit quantization to capture the dominant structure of the delta, followed by compensated residual low-rank approximation to recover fine-grained details from the smaller residual error. Experiments on various LLMs spanning dense and MoE architectures across multiple domains under this challenging setting demonstrate that DQRELO outperforms existing methods. Moreover, we establish key design principles for delta compression through extensive empirical analysis, demonstrating how task difficulty, architecture, and layer positioning create predictable patterns that can guide optimal compression strategies in production systems.

Post-training quantization (PTQ) assumes that a well-converged model is a quantization-ready model. We show this assumption fails in a structured, measurable, and previously uncharacterized way. Using a calibration-free per-group INT4 probe applied to all 154 publicly available Pythia-160m training checkpoints, we identify a three-phase divergence structure: a rapid-learning phase where both FP32 perplexity and quantization robustness improve together, a meta-stable plateau lasting roughly 70,000 steps where FP32 perplexity stagnates but INT4 gap remains bounded, and an explosive divergence phase where the INT4 gap compounds from 11% to 517% while FP32 perplexity barely moves. Critically, this divergence begins not when the learning rate starts decaying, but precisely when FP32 perplexity converges a finer-grained onset predictor that implies post-convergence weight updates, rather than decay magnitude alone, are the proximate cause. We further show that INT8 quantization is entirely immune throughout all three phases, constraining the mechanism to the coarseness of the 16-level INT4 grid specifically, and rule out weight outlier accumulation as the mechanism via direct kurtosis measurement. Finally, we conduct a controlled fork experiment from the pre-divergence checkpoint comparing three learning rate schedules (cosine continuation, SGDR warm restarts, and our proposed Oscillatory Lock-In) across nine independent runs. SGDR uniformly accelerates divergence (0/9 pairwise wins against cosine), while OLI's settled cool phases reduce the INT4 gap by 2.2 percentage points on average (t = -5.46, p < 0.0001), demonstrating that schedule amplitude calibration, not oscillation alone, determines whether perturbation helps or hurts. Our code, probe implementation, and all 154-checkpoint audit results are released publicly.

Large Language Models (LLMs) are widely used across many domains, but their scale makes deployment challenging. Post-Training Quantization (PTQ) reduces memory footprint without retraining by leveraging a small calibration set. Recent Hessian-based PTQ methods compensate quantization error via cross-channel dependencies, but such approaches degrade at low bit-widths due to noisy curvature estimates from limited calibration data. We propose DASH-Q, a robust PTQ framework using diagonal Hessian approximation and iterative weighted least squares. By discarding noise-prone dependencies, DASH-Q filters sampling noise while prioritizing the preservation of salient feature power. We outperform other PTQ baselines in ultra low-bit regime, improving zero-shot accuracy by 7.01% on average and up to 14.01% over the strongest baselines across five baseline LLM models, while showing robust and stable performance with very small calibration data.

Catastrophic forgetting poses a fundamental challenge in continual learning, particularly when models are quantized for deployment efficiency. We systematically investigate the interplay between quantization precision (FP16, INT8, INT4) and replay buffer strategies in large language models, revealing unexpected dynamics. While FP16 achieves superior initial task performance (74.44% on NLU), we observe a striking inversion on subsequent tasks: quantized models outperform FP16 by 8-15% on final task forward accuracy, with INT4 achieving nearly double FP16's performance on Code generation (40% vs 20%). Critically, even minimal replay buffers (0.1%) dramatically improve retention - increasing NLU retention after Math training from 45% to 65% across all precision levels - with INT8 consistently achieving the optimal balance between learning plasticity and knowledge retention. We hypothesize that quantization-induced noise acts as implicit regularization, preventing the overfitting to new task gradients that plagues high-precision models. These findings challenge the conventional wisdom that higher precision is always preferable, suggesting instead that INT8 quantization offers both computational efficiency and superior continual learning dynamics. Our results provide practical guidelines for deploying compressed models in continual learning scenarios: small replay buffers (1-2%) suffice for NLU tasks, while Math and Code benefit from moderate buffers (5-10%), with quantized models requiring less replay than FP16 to achieve comparable retention. Code is available at https://github.com/Festyve/LessIsMore.

Kolmogorov--Arnold Networks (KANs) replace linear weights with spline-based functions, offering strong expressivity but posing challenges for low-precision deployment due to heterogeneous parameter distributions. We introduce QuantKAN, the first unified framework for quantization-aware training (QAT) and post-training quantization (PTQ) of KANs. The framework employs branch-aware quantizers for base and spline parameters and extends modern QAT and PTQ methods to spline-based layers across EfficientKAN, FastKAN, PyKAN, and KAGN. Experiments on MNIST, CIFAR-10/100, TinyImageNet, and ImageNet provide the first unified QAT/PTQ KAN benchmarks and show that DSQ is the most robust QAT method at aggressive low-bit settings, while GPTQ is the strongest PTQ method at moderate precision. Sensitivity analyses reveal architecture-specific failure modes: spline/basis parameters dominate in FastKAN, while base or scaling parameters dominate in EfficientKAN, GRAM, and PyKAN. Vivado HLS estimates on a Xilinx UltraScale+ device further suggest up to 3.32$\times$ throughput and 7.7$\times$ lower estimated dynamic energy per inference under W4A4, exposing a residual \emph{basis-evaluation tax} that motivates basis-aware microarchitecture. QuantKAN is available at https://github.com/OSU-STARLAB/QuantKAN/.

Many LLM applications require only narrow capabilities, yet standard post-training quantization (PTQ) methods allocate precision without considering the target task. This can waste bits on layers that are less relevant to the task signal while over-compressing layers that are critical for downstream behavior. We propose Task-Aware Quantization (TAQ), a training-free, weight-only mixed-precision PTQ framework that uses a small set of unlabeled task calibration prompts to allocate higher precision to task-relevant transformer layers under a fixed bit budget. TAQ estimates layer importance from hidden representations and output sensitivity, and we instantiate it with three scoring rules: TAQ-IS, based on activation information and stability; TAQ-KL, based on output-distribution sensitivity under a quantization-noise proxy; and TAQ-O, a label-informed oracle diagnostic for analyzing layer sensitivity. Across several benchmarks, TAQ outperforms task-agnostic baselines such in most settings, with especially strong gains in the accuracy--memory ratio. We further validate that these gains translate to real deployment behavior through hardware throughput and latency measurements, and analyze calibration robustness and residual-stream error propagation. Overall, TAQ turns mixed-precision PTQ from a model-centric compression step into a task-conditioned precision-allocation problem. A reference implementation is available at \href{https://anonymous.4open.science/r/TAQ-9217/README.md}{\includegraphics[height=1em]{imgs/github-mark.png}}.

Large pretrained vision encoders are central to multimodal intelligence, powering applications from on-device vision processing to vision-language models. Since these applications often demand real-time processing of massive visual data, reducing the inference cost of vision encoders is critical. Quantization offers a practical path, but it remains challenging even at 8-bit precision due to so-called outliers. In this work, we propose $\textit{RegCache}$, a training-free algorithm that mitigates outliers in large-scale pretrained vision encoders and serves as a plug-in module that can be applied on top of other quantization methods. RegCache introduces outlier-prone yet semantically meaningless prefix tokens to the vision encoder, which prevent other tokens from having outliers. Notably, we observe that outliers in vision encoders behave differently from those in language models, motivating two technical innovations: middle-layer prefixing and token deletion. Experimental results show that our method consistently improves quantized model performance across various vision encoders, particularly in extremely low-bit regimes (e.g., 4-bit).

As increasingly large pre-trained models are released, deploying them on edge devices for privacy-preserving applications requires effective compression. Recent works combine quantization with the fine-tuning of high-precision LoRA adapters, which can substantially reduce model size while mitigating the accuracy loss from quantization. However, edge devices have inherently heterogeneous capabilities, while performing configuration-wise fine-tuning for every quantization setting is computationally prohibitive. In this paper, we propose CoA-LoRA, a method that dynamically adjusts the LoRA adapter to arbitrary quantization configurations (i.e., the per-layer bit-width choices of a pre-trained model) without requiring repeated fine-tuning. This is accomplished via a configuration-aware model that maps each configuration to its low-rank adjustments. The effectiveness of this model critically depends on the training configuration set, a collection of configurations chosen to cover different total bit-width budgets. However, constructing a high-quality configuration set is non-trivial. We therefore design a Pareto-based configuration search that iteratively optimizes the training configuration set, yielding more precise low-rank adjustments. Our experiments demonstrate that, unlike the state-of-the-art methods that require fine-tuning a separate LoRA adapter for each configuration, CoA-LoRA incurs no additional time cost while achieving comparable or even superior performance to those methods.

The high memory demands of generative language models have drawn attention to quantization, which reduces memory usage by mapping model weights to lower-precision integers. However, recent empirical studies show that, while efficient, quantization can increase the likelihood of generating biased outputs and degrade performance on fairness benchmarks. In this work, we draw new links between quantization and model fairness by adding explicit group-fairness constraints to the quantization objective and introduce Fair-GPTQ, the first quantization method explicitly designed to reduce unfairness in large language models. The added constraints guide the learning of the rounding operation toward less-biased text generation for protected groups. Specifically, we focus on stereotype generation involving occupational bias and discriminatory language spanning gender, race, and religion. Fair-GPTQ has minimal impact on performance, preserving at least 90% of baseline accuracy on zero-shot benchmarks, reduces unfairness relative to a half-precision model, and retains the memory and speed benefits of 4-bit quantization.

Deploying large language models (LLMs) is challenging due to their massive parameters and high computational costs. Ultra low-bit quantization can significantly reduce storage and accelerate inference, but extreme compression (i.e., mean bit-width <= 2) often leads to severe performance degradation. To address this, we propose Squeeze10-LLM, effectively "squeezing" 16-bit LLMs' weights by 10 times. Specifically, Squeeze10-LLM is a staged mixed-precision post-training quantization (PTQ) framework and achieves an average of 1.6 bits per weight by quantizing 80% of the weights to 1 bit and 20% to 4 bits. We introduce Squeeze10LLM with two key innovations: Post-Binarization Activation Robustness (PBAR) and Full Information Activation Supervision (FIAS). PBAR is a refined weight significance metric that accounts for the impact of quantization on activations, improving accuracy in low-bit settings. FIAS is a strategy that preserves full activation information during quantization to mitigate cumulative error propagation across layers. Experiments on LLaMA and LLaMA2 show that Squeeze10-LLM achieves state-of-the-art performance for sub-2bit weight-only quantization, improving average accuracy from 43% to 56% on six zero-shot classification tasks--a significant boost over existing PTQ methods.

Large language models (LLMs) require substantial compute, and thus energy, at inference time. While quantizing weights and activations is effective at improving efficiency, naive quantization of LLMs can significantly degrade performance due to large magnitude outliers. This paper describes FPTQuant, which introduces three novel, lightweight, and expressive function-preserving transforms (FPTs) to facilitate quantization of transformers: (1) a mergeable pre-RoPE transform for queries and keys, (2) a mergeable transform for values, and (3) a cheap, dynamic per-token scaling transform. By leveraging the equivariances and independencies inherent to canonical transformer operation, we designed these FPTs to maintain the model's function while shaping the intermediate activation distributions to be more quantization friendly. FPTQuant requires no custom kernels and adds virtually no overhead during inference. The FPTs are trained both locally to reduce outliers, and end-to-end such that the outputs of the quantized and full-precision models match. FPTQuant enables static INT4 quantization with minimal overhead and shows SOTA speed-up of up to 3.9X over FP. Empirically, FPTQuant has an excellent accuracy-speed trade-off -- it is performing on par or exceeding most prior work and only shows slightly lower accuracy compared to a method that is up to 29% slower.

Natural Language Inference (NLI) is a central task in natural language understanding with applications in fact-checking, question answering, and information retrieval. Despite its importance, current NLI systems heavily rely on supervised learning with datasets that often contain annotation artifacts and biases, limiting generalization and real-world applicability. In this work, we apply a reinforcement learning-based approach using Group Relative Policy Optimization (GRPO) for Chain-of-Thought (CoT) learning in NLI, eliminating the need for human-labeled rationales and enabling this type of training on challenging datasets such as ANLI. We fine-tune 7B, 14B, and 32B language models using parameter-efficient techniques (LoRA and QLoRA), demonstrating strong performance across standard and adversarial NLI benchmarks. At the 32B scale, GRPO-trained models generalize better than other supervised baselines in adversarial sets. With AWQ quantization, the 32B model fits within 22GB of CUDA memory. This work provides a scalable and practical framework for building robust NLI systems without sacrificing inference quality.

A recurring weakness in quantum machine learning (QML) is that reported ``quantum advantages'' are seldom tested against a \emph{capacity-matched} classical control, leaving it unclear whether a gain comes from the quantum substrate or from the architectural change that accompanies it. Our primary contribution is methodological: a protocol for attributing such gains honestly -- a capacity-matched classical bottleneck of identical parameter budget, transparent reporting of where quantum does \emph{not} help, and validation on real quantum hardware -- which we develop and apply through a concrete case study. That case study is Quantum Adaptive Self-Attention (QASA), a hybrid Transformer that replaces the value projection of a \emph{single} encoder layer with a 36-parameter parameterized quantum circuit (PQC), keeping all other layers classical. Across nine synthetic benchmarks and the real-world ETTh1 dataset, QASA improves on a full-capacity classical Transformer for chaotic and trend-dominated signals. To ask whether this is a genuinely \emph{quantum} effect, we introduce a control rarely applied in quantum machine learning -- a capacity-matched classical bottleneck with the same parameter budget -- and find that it matches the PQC on the error metrics. The gain is therefore attributable to the low-rank value-projection \emph{bottleneck} (an \emph{architectural parsimony} principle), not to quantumness; adding further quantum layers only degrades performance and trainability. We accordingly position the quantum layer not as a source of accuracy advantage but as a \emph{competitive} instantiation of this principle: its low-rank compression onto the signal's intrinsic dimensionality is matched by a classical bottleneck, so the gain is architectural rather than quantum.

Recently, numerous end-to-end optimized image compression neural networks have been developed and proved themselves as leaders in rate-distortion performance. The main strength of these learnt compression methods is in powerful nonlinear analysis and synthesis transforms that can be facilitated by deep neural networks. However, out of operational expediency, most of these end-to-end methods adopt uniform scalar quantizers rather than vector quantizers, which are information-theoretically optimal. In this paper, we present a novel Lattice Vector Quantization scheme coupled with a spatially Adaptive Companding (LVQAC) mapping. LVQ can better exploit the inter-feature dependencies than scalar uniform quantization while being computationally almost as simple as the latter. Moreover, to improve the adaptability of LVQ to source statistics, we couple a spatially adaptive companding (AC) mapping with LVQ. The resulting LVQAC design can be easily embedded into any end-to-end optimized image compression system. Extensive experiments demonstrate that for any end-to-end CNN image compression models, replacing uniform quantizer by LVQAC achieves better rate-distortion performance without significantly increasing the model complexity. Code is available at: https://github.com/xzhang9308/LVQAC.

Post-training quantization (PTQ) is essential for deploying large language models (LLMs) under strict resource constraints. State-of-the-art PTQ methods quantize each layer with a single closed-form second-order solver: to remain analytically tractable, they heavily approximate the global loss (dropping cross-channel coupling, pooling output rows into groups), and they then freeze the resulting Hessian across the entire layer, with no way to refresh it as the loss landscape shifts column by column--a phenomenon we call information misalignment. We propose REAL-Q (Real-time E2E-loss Aligned LLM Quantization), a novel PTQ paradigm that breaks this compromise: instead of diluting the objective for the sake of analytic tractability, REAL-Q targets an end-to-end-aligned surrogate of the global loss and refines it via fine-grained, dynamic Block-wise Gradient Descent applied after every column block (128 columns). By coupling this fine-grained correction with a sliding window mechanism for smooth cross-layer transitions, REAL-Q effectively mitigates error propagation across the network. On LLaMA-3.1 (8B and 70B) and Qwen3 (0.6B-32B) at W4A16, REAL-Q reduces end-to-end KL divergence by up to ~49% relative to state-of-the-art globally-guided methods.

Post-training quantization (PTQ) of large language models degrades sharply below 4-bit precision. We identify the root cause as residual stream distributional drift: quantization noise injected at each transformer layer accumulates in the shared residual representation, causing KL divergence from the FP16 baseline to grow super-linearly with depth (Pearson r=0.999 with log-perplexity, p<0.001, confirmed across all tested methods and bit-widths). We discover that 84% of LLaMA-3-8B layers exhibit non-Gaussian residual distributions (KS test, p<=0.05), and that per-layer residual stream variance grows 6,548x across depth. We propose RDQ (Residual Distribution Quantization), a PTQ framework whose central contribution is Cascaded Error Compensation (CEC): a sequential calibration procedure that captures the actual drifted activations each layer receives (computed by running calibration data through already-quantized upstream layers) and fits per-channel AWQ-style scales against those drifted inputs, with scales folded into preceding RMSNorm weights for exact mathematical equivalence at zero inference overhead. RDQ achieves state-of-the-art results on all three tested architectures: LLaMA-3-8B: 7.55 / 5.62 PPL (W3/W4); Qwen-2.5-7B: 7.46 / 6.38 PPL; Mistral-7B: 6.88 / 5.73 PPL. RDQ beats the best published baseline (LeanQuant/SpinQuant) at every model and bit-width combination, with gains up to -46.4% vs. RTN at W3A16 on LLaMA-3-8B. All output is standard group-128 asymmetric quantization, deployable on Qualcomm AIMET, GGUF, and any standard inference stack at zero runtime overhead.

Post-training quantization (PTQ) is a practical way to reduce the memory footprint of large language models, but low-bit quantization is sensitive to mismatches between the quantization codebook and the empirical weight/activation distributions. We revisit Benford-like leading-digit statistics as a lightweight diagnostic of scale-broad behavior in transformer tensors. Across several model families, we observe a consistent functional dichotomy: transformational nn.Linear weights tend to be Benford-like, whereas LayerNorm parameters systematically deviate. Motivated by this observation, we propose BenQ, a data-free PTQ codebook that uses a simple log-spaced grid as a proxy for scale-broad distributions and applies it selectively to transformational layers while keeping stability-critical parameters in higher precision. In 4-bit group-wise PTQ, BenQ consistently improves over uniform RTN and trades wins with NF4 across architectures and tasks, while remaining substantially simpler than optimization-based methods. We additionally report dynamic activation quantization as an exploratory stress test: the results show that log-spaced grids can reduce RTN failures in some families, but also reveal that outlier handling remains essential for reliable low-bit activation PTQ. Code is available at https://github.com/ufopcsilab/benford-quant.

Mixture-of-Experts (MoE) has become a practical architecture for scaling LLM capacity while keeping per-token compute modest, but deploying MoE models on a single, memory-limited GPU remains difficult because expert weights dominate the HBM footprint. Existing expert offloading and prefetching systems reduce the resident set, yet they often pay expert-loading costs on the critical path when activation becomes dense. Post-training quantization (PTQ) lowers the footprint without transfers, but prevailing pipelines fix expert bit-widths offline and assume routing remains stable, even though MoE expert utilization is heavy-tailed and the hot set can shift across workloads. We present DynaExq, a runtime-aware mixed-precision serving system that treats single-GPU MoE inference under a hard HBM envelope as an online, budget-constrained precision allocation problem. The key insight is to keep the experts that dominate runtime traffic resident at higher precision, while maintaining a low-precision fallback for the remaining experts, so the system can reduce transfer volume and avoid the waiting latency that limits offloading and prefetching under dense activation. DynaExq estimates long-horizon expert hotness from router traces, selects a per-layer high-precision resident set via a budget-feasible top-$n$ rule, and applies promotions and demotions asynchronously through stable expert handles so the forward pass always executes on a fully materialized expert version. Across Qwen3-MoE-30B/80B and six benchmarks, DynaExq improves accuracy over static PTQ on Qwen3-80B (73.09% to 77.57%) under comparable device-memory budgets and achieves up to 2.73x higher throughput than offloading/prefetch baselines at batch size 32.

Quantization-aware training (QAT) is essential for extremely low-bit large language models (LLMs). Current QAT methods are mainly based on scalar quantization (SQ), which enables efficient optimization but suffers from severe performance degradation at 2-bit precision. On the other hand, vector quantization (VQ) provides substantially higher representational capacity, but its discrete codebook lookup prevents end-to-end training. We propose LC-QAT, a 2-bit weight-only VQ-QAT framework that represents quantized weights via a learned affine mapping over discrete vectors, which yields a high-quality PTQ initialization and enables fully differentiable end-to-end optimization without explicit codebook lookup in the training forward pass. This strong post-training initialization makes LC-QAT highly data-efficient. Experiments across diverse LLMs demonstrate that LC-QAT consistently outperforms state-of-the-art QAT methods while using only 0.1%--10% of the training data. Our results establish LC-QAT as a practical and scalable solution for extreme low-bit model deployment. Codes are publicly available at https://github.com/AI9Stars/UniSVQ.