Robotic Control

This paper presents a three-stage offline command generation framework for reproducing human lower-limb motion on a suspended bipedal robot while matching torque trajectories computed from the robot dynamic model. First, State-Dependent Riccati Equation (SDRE) control derives the reference torque trajectory for the measured motion. Second, parameterized optimization converts this trajectory into trapezoidal joint velocity commands under motor speed and acceleration limits. Third, a proportional-integral-derivative linear quadratic regulator (PID-LQR) compensation scheme refines these commands using experimental tracking data. The platform executes the resulting profiles to reproduce human walking and squatting motions recorded by a Vicon system, allowing evaluation of tracking accuracy and repeatability. Results show that the average root mean square error (RMSE) and standard deviation (STD) of joint angles across repeated trials remain below 7° and 0.33°, respectively. Joint angle and torque trajectory comparisons show lower maximum RMSE and STD values than those for MPC and IPSO-PID in every reported case. The framework enables accurate and repeatable motion reproduction within actuator limits, providing controlled and measurable conditions that can reduce reliance on human participation and associated risks during preliminary evaluation of devices for assistive walking, gait training, and rehabilitation.

Kinematic motion planners are among the most widely used control approaches in robotic applications. By modeling the robot as a first-order system, they generate a feedback-based desired velocity field that guides the robot toward a target while avoiding obstacles. However, extending such feedback planners to systems with higher-order dynamics, while preserving safety and stability properties, is not a straightforward task. In the present work, we propose an approach that adapts existing feedback-based kinematic motion planners to second-order autonomous systems while retaining their safety and almost global asymptotic stability guarantees. We consider two general classes of kinematic motion planners: those derived from navigation functions and those defined directly through desired velocity fields without relying on an underlying navigation function. To validate the proposed methodology, two feedback-based kinematic motion planners are adapted to second-order systems and evaluated both in simulations and experimentally.

Computed tomography (CT)-guided needle biopsies are critical for diagnosing a range of conditions, including lung cancer, but present challenges such as limited in-bore space, prolonged procedure times, and radiation exposure. Robotic assistance offers a promising solution by improving needle trajectory accuracy, reducing radiation exposure, and enabling real-time adjustments. In our previous work, we introduced a robotic platform designed for accurate needle insertion within the confined CT bore. However, its performance in clinical settings is restricted by limited dexterity and a constrained workspace. In this study, we present an 11-degree-of-freedom (DOF) robotic system that integrates a 6-DOF robotic base with an improved 5-DOF cable-driven end-effector, yielding a significantly expanded workspace and enhanced dexterity. To leverage the hyper-redundant degrees of freedom, we introduce a weighted inverse kinematics controller, along with a null-space control strategy to optimize maneuverability and dexterity. By using a task-oriented weight matrix as a hyperparameter, the system provides a two-stage priority scheme fit for both large-scale movement and fine in-bore adjustments. In clinically relevant simulated scenarios, the system demonstrates a consistent 97% reachability rate across various human models. In addition, the task-oriented weight-matrix policy is extensively explored in five representative subtasks seen during needle biopsy through both simulation and real-world experiments, demonstrating superior tracking accuracy and enhanced manipulability for CT-guided procedures.

Robot manipulators may start a new task with a tracking error larger than the prescribed tolerance. Conventional barrier controllers generally require the initial error to lie within this tolerance, which prevents their direct use under such conditions. This paper develops a progressive barrier controller that gradually contracts an initial error bound to the required value within a prescribed time. The robot can therefore start outside the final bound, while the direct joint-position error satisfies it after the transition. The closed-form control law combines progressive barrier feedback with an online adaptive torque term based on an actor--critic structure. A Lyapunov analysis establishes bounded closed-loop signals and gives sufficient conditions for satisfaction of the final tracking bound. Two-link simulations consider large initial errors, actuator saturation, dynamic variations, disturbances, and measurement errors. The adaptive term reduces the median root-mean-square tracking error by 45.1% compared with the zero-weight progressive barrier controller. The simulations also map the initial errors that can be handled at different transition times under fixed torque limits. Finally, an experiment on a Niryo Ned3 Pro illustrates tracking performance using measured position and motor-current data.

Reinforcement learning (RL) has achieved remarkable success in various robotic tasks; however, its deployment in real-world scenarios, particularly in contact-rich environments, often overlooks critical safety and stability aspects. Policies without passivity guarantees can result in system instability, posing risks to robots, their environments, and human operators. In this work, we investigate the limitations of traditional RL policies when deployed in contact-rich tasks and explore the combination of energy-based passive control with safe RL in both training and deployment to answer these challenges. Firstly, we reveal the discovery that standard RL policy does not satisfy stability in contact-rich scenarios. Secondly, we introduce a \textit{passivity-aware} RL policy training with energy-based constraints in our safe RL formulation. Lastly, a passivity filter is exerted on the policy output for \textit{passivity-ensured} control during deployment. We conduct comparative studies on a contact-rich robotic maze exploration task, evaluating the effects of learning passivity-aware policies and the importance of passivity-ensured control. The experiments demonstrate that a passivity-agnostic RL policy easily violates energy constraints in deployment, even though it achieves high task completion in training. The results show that our proposed approach guarantees control stability through passivity filtering and improves the energy efficiency through passivity-aware training. A video of real-world experiments is available as supplementary material. We also release the checkpoint model and offline data for pre-training at Hugging Face.

This paper introduces a novel modular architecture for ROS2 that decouples the logic required to acquire, validate, and interpolate references from the control laws that track them. The design includes a dedicated component, named Reference Generator, that receives references, in the form of either single points or trajectories, from external nodes (e.g., planners), and writes single-point references at the controller's sampling period via the existing ros2_control chaining mechanism to downstream controllers. This separation removes duplicated reference-handling code from controllers and improves reusability across robot platforms. We implement two reference generators: one for handling joint-space references and one for Cartesian references, along with a set of new controllers (PD with gravity compensation, Cartesian pose, and admittance controllers) and validate the approach on simulated and real Universal Robots and Franka Emika manipulators. Results show that (i) references are tracked reliably in all tested scenarios, (ii) reference generators reduce duplicated reference-handling code across chained controllers to favor the construction and reuse of complex controller pipelines, and (iii) controller implementations remain focused only on control laws.

Pneumatically-actuated anthropomorphic robots with high degrees of freedom (DOF) offer significant potential for physical human-robot interaction. However, precise control of pneumatic actuators is challenging due to their inherent nonlinearities. This paper presents the development of a compact 13-DOF upper-body humanoid robot. To assess the feasibility of an effective controller, we first investigate its key dynamic properties, such as actuation time delays, and confirm that its behavior is reproducible across repeated trials. Leveraging this reproducibility, we implement a preliminary data-driven controller for a 4-DOF arm subsystem based on a multilayer perceptron with explicit time delay compensation. The network was trained on random movement data to generate pressure commands for tracking arbitrary trajectories. In comparative evaluations on this subsystem, the data-driven controller achieved lower tracking errors than a traditional PID controller. This result suggests that data-driven approaches are a promising option for controlling complex, high-DOF pneumatic robots.