Abstract
Real-time collision avoidance for robotic manipulators requires fast reactions to unexpected obstacle motion and lookahead to avoid becoming trapped by near-future constraints. Full model predictive control can provide this foresight, but its online cost may grow quickly with horizon length, model fidelity, and the number of active geometric constraints. Conversely, horizon-free reactive methods are computationally efficient but can be short-sighted in dynamic clutter. We present a task-space receding-horizon controller that uses a short contact-consistent rollout to generate a terminal kinematic reference satisfying internal non-penetration constraints, then computes only the first input of a smooth minimum-acceleration transition toward that reference. Starting from a closed-loop inverse-kinematics regulation law, the rollout is performed with an iterative dynamics solver operating on inflated convex robot and obstacle geometries, so that robot-obstacle contacts, dynamic obstacle motion, and self-collisions can shape the terminal reference without requiring full constrained trajectory optimization. We analyze the contact-inactive closed loop and show local exponential task-space regulation under standard regularity assumptions. For contacts activated inside the rollout, we characterize the corresponding discrete updates and bound the effect of moving obstacles on regular operating sets. Simulations on a 40-DOF multi-chain system show that intermediate horizons balance anticipation, responsiveness, and computational cost. Hardware experiments on a 6-DOF platform demonstrate consistent sim-to-real behavior without accurate inertial parameter estimation, and comparisons against dynamic optimization fabrics and model predictive control (MPC) baselines show improved success rates in dynamic clutter while preserving solve times compatible with real-time execution in the tested regimes.
Explore similar work
Aug 13, 2026cs.RO
Recent advances in teleoperation have enabled robotic manipulators to perform dexterous, human-arm-like motions. However, human operators may fail to avoid suddenly appearing obstacles promptly and effectively, particularly under network latency or limited attention, thereby creating safety risks. To address this issue, we propose a lightweight and modular framework for proactive collision avoidance, operating directly at the end-effector velocity-command level. After preprocessing the point cloud, the framework first predicts potential collisions based on time-to-collision (TTC) with integrated overshoot protection, and subsequently rotates the relative-velocity vector using Rodrigues' rotation formula. The deflection changes only the direction of the relative velocity while preserving its magnitude, thereby mitigating the deadlock problem commonly encountered by conventional artificial potential field (APF) methods. The prediction module compensates for point-cloud processing latency introduced by complex teleoperation pipelines, while the lightweight design enables the high-frequency control required for teleoperation. Simulations across diverse scenarios show that the proposed method achieves a higher end-effector collision avoidance rate than the baseline methods. Experiments on a physical robotic system further validate its collision-avoidance effectiveness.
Changhao Hu, Zeyi Liu, Songqiao Hu +3
May 14, 2026cs.RO
This paper addresses the motion control problem for mobile robots in obstacle-cluttered environments. The mobile robot has partial environment information only, and aims to move from an initial position to a target position without collisions. For this purpose, a reactive planning based control strategy (RPCS) is proposed. First, the initial and target positions are connected as a reference trajectory. Then, a reactive planning strategy (RPS) is developed to ensure the collision avoidance by modifying the reference trajectory locally based on the partial environment information. Next, an adaptive tracking control strategy (ATCS) is proposed to track the reference trajectory with potentially local modifications via the discretization techniques. Finally, the RPS and ATCS are combined to establish the RPCS, whose efficacy and advantages are illustrated by numerical examples.
Li Tan, Junlin Xiong, Yan Wang +1
Dec 10, 2025cs.RO
Reactive control can gracefully coordinate the motion of the base and the arm of a mobile manipulator. However, incorporating an accurate representation of the environment to avoid obstacles without involving costly planning remains a challenge. In this work, we present ReMoSPLAT, a reactive controller based on a quadratic program formulation for mobile manipulation that leverages a Gaussian Splat representation for collision avoidance. By integrating additional constraints and costs into the optimisation formulation, a mobile manipulator platform can reach its intended end effector pose while avoiding obstacles, even in cluttered scenes. We investigate the trade-offs of two methods for efficiently calculating robot-obstacle distances, comparing a purely geometric approach with a rasterisation-based approach. Our simulation experiments on both synthetic and real-world scans demonstrate the feasibility of the proposed method, achieving performance comparable to controllers that rely on perfect ground-truth information. We further validate the approach on a real robot platform more details: https://remosplat.github.io
Nicolas Marticorena, Tobias Fischer, Niko Suenderhauf