Abstract
Wrist-worn IMU has been widely used for daily-life health monitoring. Yet, it does not fully represent whole-body dynamics, for which the body center of mass (COM) is considered the physiological reference standard. Therefore, this work proposes a simplified kinematic model (KM), which is designed to map the wrist IMU to the COM acceleration. It is built upon several reductive assumptions that enable the solvability of the dynamic equations based on wrist IMU measurements alone. This work further proposes three types of hybrid AI modeling methods, namely human kinematic model-based neural network (HKM-NN) models, to leverage the power of both grey-box and black-box modeling. The HKM-NN methods include serial learning (ser-) and two approaches of simultaneous learning (sim1- and sim2-). The proposed models are trained and tested using our dataset, which includes wrist IMU measurements and ground-truth COM measurements from 10 healthy volunteers during six gait activities and sit-to-stand (SS) transitional movement. The results demonstrate the feasibility of estimating COM acceleration from wrist IMU measurements. Our KM model yields satisfactory results, with an error ranging from 6.7% to 12.5% for gait activities and 5.6% for the SS. In comparison with the KM model, our HKM-NN models significantly enhance the performance, achieving 5.3% to 9.3% errors for gait activities, and the best error of 3.9% for the SS. In addition, the HKM-NN models demonstrate distinct robustness characteristics under noisy test conditions, with sim1-/sim2- generally maintaining greater robustness under Gaussian perturbations, while the KM model exhibits comparatively strong robustness under salt-and-pepper noise. These findings highlight the importance of combining biomechanical structure with data-driven learning for wearable sensing applications operating under imperfect and noisy measurement conditions.
Explore similar work
May 21, 2026cs.CV
As wearable and mobile devices become increasingly embedded in daily life, they offer a practical way to continuously sense human motion in the wild. But inertial signals are highly dependent on the sensing setup, including body location, mounting position, sensor orientation, device hardware, and sampling protocol. This setup dependence makes it difficult to learn motion representations that transfer across devices and datasets, and limits the broader use of wearable IMUs beyond closed-set recognition. We introduce AnyMo, a geometry-aware framework for setup-agnostic human motion modeling. AnyMo uses physics-grounded IMU simulation over dense body-surface placements to generate diverse and plausible synthetic signals, pre-trains a graph encoder from paired synthetic placement views and masked partial observations, tokenizes multi-position IMU into full-body motion tokens, and aligns these tokens with an LLM for motion-language understanding. We evaluate AnyMo on three complementary tasks: zero-shot activity recognition across 14 unseen downstream datasets, cross-modal retrieval, and wearable IMU motion captioning, where it improves average Accuracy/F1/R@2 by 11.7%/11.6%/22.6% on HAR, increases zero-shot IMU-to-text and text-to-IMU retrieval MRR by 15.9% and 28.6%, respectively, and improves zero-shot captioning BERT-F1 by 18.8%. These results support AnyMo as a generalist model for wearable motion understanding in the wild. Project page: https://baiyuchen.com/project/AnyMo.
Baiyu Chen, Zechen Li, Wilson Wongso +5
Mar 12, 2026cs.RO
Motion imitation learning (IL) is increasingly used in robotics and human gait modeling, yet its ability to recover biomechanically consistent joint moments without explicit kinetic information remains unclear. In this study, we examined whether motion imitation alone can estimate reasonable biological joint moments. We compare motion-only IL (MOIL) against a kinetics-aware IL (KAIL) framework that incorporates ground reaction forces (GRF) and center of pressure (CoP) in imitation rewards, with an ablation study to examine the contribution of each kinetic term. Experiments were conducted using walking data from a non-disabled participant at three speeds (0.9, 1.2, and 1.5 m/s). While both MOIL and KAIL achieved comparable kinematic tracking accuracy, MOIL exhibited substantially larger errors in GRF, CoP, and joint moment estimates relative to inverse dynamics references. In contrast, KAIL produced kinetics more consistent with biomechanical values. These findings highlight a fundamental limitation of MOIL approaches, which may lead to erroneous interpretations of gait biomechanics and downstream applications by failing to estimate consistent human-like gait kinetics.
Xinyi Liu, Jangwhan Ahn, Edgar Lobaton +2
Jul 7, 2026cs.LG
Wearable motion sensing provides a continuous and scalable window into human behavior and health, making it a natural fit for foundation models, yet its pretraining and scaling principles remain poorly understood. Prior work studies isolated design choices, such as sensor placement or sampling frequency, often under fixed settings and narrow downstream tasks that fail to capture real-world sensing diversity. We introduce Inertia-1, a fully open exploration of wearable motion foundation models. Using massive corpora of accelerometer data from global sources spanning more than 18.2M hours, we build a controlled framework for studying the full lifecycle of wearable motion foundation models, covering data choices such as sensor modality, device placement, sampling rate, window length; model choices such as architectures and model size; and training choices such as pretraining objective and data scale. Extensive evaluations across 15 datasets spanning human activity recognition, freezing-of-gait detection, and disease prediction reveal intriguing findings for building motion foundation models that generalize across tasks and sensing conditions. Collectively, Inertia-1 not only presents state-of-the-art recipes for diverse downstream tasks, but also serves as a comprehensive, practical, and open cookbook for wearable motion representation learning.
Zongzhe Xu, Aakarsh Anand, Sarah Jiang +4