cs.RONov 9, 2026

Sliding into Balance: Benefits of a Sliding Payload for Load Distribution and Disturbance Rejection in Dual-UAV Transportation

Authors: Jorge Vicente-Martinez, Francisco José Mañas-Álvarez, Edgar Ramirez-Laboreo

Organizations: Universidad de Zaragoza · Universidad Nacional de Educación a Distancia

Abstract

This paper analyzes the cooperative transportation of a payload suspended from two drones in which, instead of being attached to two independent ropes, the payload is allowed to slide along a single rope connecting both UAVs. First, a planar nondimensional dynamical model of the sliding motion with viscous friction is presented. Then, considering stationary drones, this configuration is compared with a fixed payload with the same total rope length, both at equilibrium and under disturbances. The analytical results show that the sliding payload equalizes the tension in both rope segments for any relative position of the drones, so that no rope loses tension at equilibrium; it doubles the region reachable by the payload and, except for low friction combined with a large drone separation, it enlarges the set of admissible disturbances. Finally, a dynamic simulation also shows that under realistic gusty wind profiles, the average tension imbalance between the drones is reduced with respect to the fixed-payload solution.

Figures & tables

Explore similar work

Oct 9, 2026

Cooperative Aerial Transportation of a Payload with a Sliding Cable Attachment

This paper presents a dual-quadrotor hook- suspended transport system for cooperative aerial manipulation of a payload that is not rigidly attached to a fixed point along the cable. Two quadrotors are connected by a single inextensible cable that passes through a frictionless hook mounted on the payload, allowing the cable to slide between its two segments. This introduces a cable-distribution variable that couples the quadrotor motion, cable geometry, and payload dynamics. A feasible reference-generation framework is formulated using the desired payload pose, cable distribution, and system shape while satisfying the cable-length constraint and elliptical workspace. The quadrotors track the geometrically generated trajectories while maintaining positive cable tension and respecting actuator limits. The payload pose is estimated from the system geometry, and its measured position is used only to validate the desired trajectory. The approach is evaluated through experimental demonstrations.
Sep 25, 2026

Compact Force Sensor for Dual-UAV Cable-Suspended Payload Transport with Tension-Aware Outer-Loop Control

Cooperative payload transportation using multiple Unmanned Aerial Vehicles (UAVs) poses challenges in stability, coordination, and robustness, especially under external disturbances and unmodeled dynamics. This work proposes a dual-UAV payload transportation framework supported by a compact, custom-designed force sensor measuring the interaction force at the UAV cable anchor point. The sensor design and mathematical model are presented, and its performance is characterized through static and dynamic tests evaluating linearity, hysteresis, repeatability, and crossload. The control architecture follows a cascade structure: fast inner loops handle vehicle stabilization, while outer loops are designed to compensate for the measured forces. The approach is validated through simulations and indoor experiments under position uncertainty. Payload-drop and constrained-space tests assess the proposed sensing and control architecture against literature-based distributed references, showing improved stabilization, coordination, and disturbance rejection. A video of the experiments is available at: https://youtu.be/rIw9-fvV8Qw.
Oct 1, 2026

AFD-CAMLs: Agile Force-Distribution-Aware Planning and Control for Cable-Suspended Aerial Multi-Lifting Systems

Multiple UAVs can cooperatively transport heavy payloads while controlling their position and orientation. Trajectory-based methods offer high agility while satisfying system constraints, but can produce uneven force distributions when the tension-to-wrench allocation is redundant or ill-conditioned, particularly under geometric mismatch and low-level tracking errors. We propose a hybrid planning-and-control framework to address this problem. A global planner generates payload trajectories and cable-force references by exploring the allocation null space under a prescribed internal-force setting. These references augment the cost of a centralized local planner, promoting feasible force distributions while generating trajectories for all UAVs. An admittance filter then compares the planned forces with onboard cable-tension estimates and adjusts the kinematic references to improve force tracking in degenerate or near-degenerate configurations. Simulations and experiments involving four to ten UAVs demonstrate more balanced tension distributions during both hovering and demanding agile maneuvers, without compromising agility or payload-tracking performance.