Sequential Recommendation

First-stage recommenders in multi-stage systems produce a ranked candidate list from which a limited prefix is forwarded to downstream rankers. Because each forwarded item must be processed by more expensive ranking stages, this shortlist cannot be arbitrarily large. The first-stage objective is therefore high coverage of relevant items within the forwarded prefix, commonly measured by Recall@$k$. A relevant item may be available deeper in the retrieved list but absent from the shorter prefix that is actually consumed. This paper studies post-hoc verification for promoting such candidates into the consumed shortlist without retraining or replacing the retriever. We introduce a lightweight generative verifier for retrieval models. Given a retriever state and a candidate item, the verifier scores the item through the likelihood of its identifier tokens. It is trained post hoc with next-token cross entropy, requires no sampled negatives or candidate pool during training, and scores only the retriever's top-$K$ candidates at inference. The interface is minimal: the retriever supplies a query state and candidate items, and the item representation can use any fixed tokenization. Across Amazon product recommendation and YaMBDa music recommendation, the same verifier training recipe improves Recall@10 for SASRec, GRU4Rec, NextItNet, and MiniOneRec. Ablations show that the improvements are not explained solely by injecting item-content features into the retriever, supporting verification as a post-hoc output-side adaptation mechanism.

Modeling long-term user behavior is central to sequential recommendation and billion-scale industrial recommender systems, yet production ranking models operate under strict latency, memory, communication, and training-throughput constraints. At the 100K scale, the challenge extends beyond attention complexity: raw sequence features must be stored, transferred, and repeatedly processed during training and online serving. Existing approaches based on history truncation, multi-stage behavior retrieval, compressed lifelong histories, or train-short/infer-long extrapolation either weaken end-to-end optimization or retain substantial length-dependent cost. We present SequenceO1, an end-to-end framework for ultra-long user behavior sequence modeling, deployed at full traffic on Douyin with histories of up to 100K interactions. SequenceO1 follows a compress-then-reason design. Its Sketch Attention (SA) uses learnable prototypes and prototype-wise normalization to compress the raw history into a fixed-size, target-agnostic user representation. Target-conditioned Stacked Target-to-History Cross Attention (STCA) then models complementary time scales: a recent 10K suffix for short-term interests and the compact sketch for long-term preferences. To make training and inference practical, SequenceO1 combines low-rank user representation caching, multi-request user-level batching, pipeline lift, and a fused FlashSA kernel to amortize feature storage, communication, and computation across targets, training instances, and consecutive requests. Production experiments show consistent offline and online gains, while the compact cached sketch retains most of the benefit of directly scaling end-to-end sequence ranking to 100K. These results provide a practical model-system approach to efficient attention, sequence compression, and scalable long-sequence and long-context recommendation systems.

Recent semantic and generative-retrieval recommenders report substantial improvements over ID-only sequential baselines, but it remains unclear whether these gains arise from language-model reasoning, semantic-ID generation, end-to-end semantic architectures, stronger offline item representations, or complementary semantic and collaborative signals. We investigate this attribution ambiguity through LIME-Rec, a lightweight and auditable recovery test. LIME-Rec combines three independent experts: a SASRec sequential expert, an ItemCF co-occurrence expert, and a semantic expert based on frozen BAAI/bge-base-en-v1.5 item embeddings. Their full-catalog scores are normalized per user and combined through auditable score-level fusion followed by bounded history calibration. The fusion gate and calibration head are fitted on validation data only, require no serving-time language-model inference, and keep each expert contribution separately inspectable. On Amazon Beauty, Toys, and Sports, LIME-Rec achieves R@10 scores of 0.0996, 0.1105, and 0.0593, outperforming the strongest comparison baseline by 7.0%-12.0%. Three-expert fusion without history calibration consistently outperforms calibrated SASRec, showing that calibration alone does not explain the recovery. Randomly permuting item-text embeddings across item IDs reduces R@10 by 13.6%-17.5%, indicating that the gains depend on genuine item-text correspondence rather than additional representation capacity. These results suggest that lightweight recovery from offline item representations and transparent fusion should be ruled out before improvements are attributed to serving-time language modeling, semantic-ID generation, or heavier semantic machinery.

Modern recommendation models gain prediction quality by scaling feature-interaction and sequence modules, but production cost constraints cap how far systems can scale. In this work, we propose Request-Oriented Compute Sharing (ROCS), a modeling and inference paradigm that exploits a unique property of recommendation inference: each user request is evaluated against many candidates, while request-side features are shared across candidates. ROCS defers request-candidate interactions as late as possible, isolates candidate-dependent representations, and evaluates substantial portions of the model once per request rather than once per candidate, significantly improving inference efficiency while maintaining or improving prediction quality. To realize this paradigm, we develop Generalized Layer Masking (GLM) to enforce candidate isolation in feature-interaction architectures, and Deep Cross Attention (DCA) to extend request-oriented sharing to sequence architectures. To support efficient GPU deployment, we co-design In-Kernel Broadcast Optimization (IKBO) that significantly accelerates ROCS model execution. Experiments on public benchmarks show that ROCS consistently improves the quality-efficiency tradeoff across recommendation backbones. On production-scale workloads, ROCS achieves up to a 3x QPS improvement on retrieval models without quality degradation and a 0.5% relative LogLoss improvement with a 50% QPS gain on a short-form video ranking model. ROCS has been deployed across large-scale recommendation systems spanning ads and organic surfaces, retrieval and ranking stages, and more than two orders of magnitude in inference complexity, delivering significant online gains at reduced infrastructure cost.

Rotary Position Embedding (RoPE) has been widely adopted in transformer-based large language models. However, its log-linear frequency schedule, originally designed to produce long-term attention decay, limits its adoption in domains with more complex distance-correlation patterns, such as temporal periodicity in sequential recommendation. We investigate the expressiveness of general query/key rotations and find that any normalized continuous positive-definite attention modulation function can be approximated by random rotations induced by its own Fourier transform, which we term Random Fourier Rotations. Building on this theory, we propose ClockRoPE for routine modeling in sequential recommendation, where rotation frequencies are derived from periodic attention modulation functions. In online A/B tests, ClockRoPE demonstrates consistent improvements in valued engagement metrics, and has been successfully deployed in production-scale generative retrieval system at a major video-sharing platform.

Graph Neural Networks (GNNs) and Large Language Models (LLMs) have each advanced recommendation systems by modeling structural and semantic signals, respectively. However, integrating their complementary strengths remains challenging, particularly in sparse settings where maintaining semantic precision is critical. We propose TRWH (Text-driven Random Walk Heterogeneous Graph Neural Network), a novel framework that fuses LLM-generated textual profiles with heterogeneous graph structures through strategic random walk augmentation. TRWH consists of three core components: (1) Embedding Creation, which produces user and item representations using both Word2Vec and LLM-based profiling; (2) a Heterogeneous Graph Neural Network (HeteroGNN) that propagates information across multi-relational edges; and (3) Random Walk-based Path Construction, which enriches sparse graphs with second-order user-user and item-item links. Experiments on the Amazon-2023 Fashion (2M users, 825K items) and Beauty (631K users, 112K items) datasets demonstrate that TRWH achieves substantial performance gains over state-of-the-art methods, including 80.0% RMSE and 52.6% MAE reductions on Fashion, and 25.7% and 10.8% improvements on Beauty. Notably, while random walks improve performance with traditional embeddings, they can dilute the nuanced representations learned by LLMs, underscoring the importance of adaptive integration strategies.

Large-scale recommendation systems face "Memory Wall" bottlenecks due to massive, dense embedding tables. While generative retrieval uses discrete tokens for IDs, high-dimensional context still relies on inefficient dense formats. Inspired by computer vision data compression, we propose Dual-purpose Semantic IDs to achieve LLM-level I/O efficiency. Our methodology uses hierarchical quantization to condense continuous embeddings into discrete Semantic IDs performing two concurrent roles: (1) Collaborative Identity: modeling user-item interactions via learnable embedding table; and (2) Content Reconstruction: using a lightweight Semantic Decoder for on-the-fly embedding approximation. This approach replaces massive vector storage with on-demand reconstruction, reducing system overhead and data footprints. We demonstrate the efficacy of our framework through offline evaluations and successful online deployment in production-scale ranking and retrieval systems at a major video sharing platform, showing that discrete tokens are indeed all you need for highly efficient, content-rich recommendation.

Conventional recommenders capture users' preferences by optimizing observed user-item relations, whereas continuous generative recommendation additionally learns the trajectory of synthesizing a target item. Flow matching drives this process by gradually shaping initial noise into a definitive next-item representation through intermediate states in a continuous embedding space. However, item catalogs are discrete and sparsely supported, meaning even a straight Euclidean path can cross continuous regions that contain little evidence of valid item semantics. Formalizing this failure as the Euclidean void, we propose MIRAGE, a Manifold-Informed Rectification framework for Accelerated Generation of Embeddings in sequential recommendation, which rectifies the learned embedding geometry around an unchanged straight probability path. By leveraging an item co-occurrence graph as a proxy for the underlying semantic manifold, MIRAGE aligns interpolated path states with local anchors, reorganizing the embedding space to ground the trajectory in valid item support. MIRAGE retains the original probability path and uses the graph only during training, thereby enabling accurate and efficient one-step inference. Extensive experiments on four real-world datasets reveal that MIRAGE consistently outperforms state-of-the-art baselines, effectively boosting performance on sparsely observed targets while achieving robust overall accuracy. Our code will be made publicly available upon publication.

Large language models (LLMs) have been applied to sequential recommendation by formulating it as a natural language task. Previous work has improved personalization by incorporating collaborative and sequential signals through input conditioning or LLM fine-tuning. However, existing approaches often rely on one or more of the following: LLM fine-tuning, additional architectural modules, representation distillation, or item-level conditioning over long interaction histories, increasing training complexity and deployment cost. We propose REPREC, a lightweight framework that reformulates LLM-based sequential recommendation through lightweight user representation alignment. REPREC maps a fixed-size user embedding from a frozen sequential encoder into a small set of learned soft tokens through a lightweight MLP injector that conditions a frozen LLM, leaving both pretrained backbones unchanged while training only the injector. We conducted exhaustive experiments on multiple benchmark datasets and demonstrate that REPREC consistently outperforms LoRA while remaining compatible with different pretrained sequential encoders and LLM backbones, enabling a modular and production-friendly recommendation pipeline without modifying either pretrained component. The gains are particularly pronounced for casual and core users across all datasets, highlighting REPREC's effectiveness in low-data regimes. Finally, when trained on short prompt histories and evaluated with longer contexts, REPREC maintains 85-100% of LoRA's performance while reducing per-epoch training time by an average of 1.51X, demonstrating an effective balance between recommendation quality and computational efficiency for production deployment. The code is available at https://github.com/phdbotcode/REPREC

Sequential recommendation (SR) models capture continuously observed behavior, but a returning user may have no interactions for months or years. We define this setting as Zero-Observation Reactivation: the user has a pre-gap history, while the platform observes no behavioral signals during a macro-gap Delta t. Under a chronologically aligned Gap-Synthesize Protocol on three Amazon datasets (Video Games, CDs & Vinyl, and Movies & TV), Hit@10 decreases monotonically across the evaluated gap buckets and reaches its lowest level beyond one year. The pattern appears across recurrent, unidirectional, and bidirectional SR backbones. We propose DeltaGate, a lightweight output-layer plugin that keeps the backbone frozen and routes each representation dimension between the personalized history and a learned, zero-initialized global prior. The gate is conditioned jointly on Delta t and the personalized representation. In a controlled diagnostic, we hold the personalized representation fixed and vary Delta t to isolate the trained gate's response to the gap input. In the >365d Video Games bucket, DG-SASRec reaches 0.047 Hit@10 versus 0.031 for SASRec, while DG-BERT4Rec reaches 0.046 versus 0.025 for BERT4Rec, with 66K trainable parameters (2--4% overhead). End-to-end retraining attains higher absolute accuracy but changes the backbone embeddings; the frozen plugin preserves zero backbone drift, uses about 40x fewer trainable parameters, and retains observable dimension-wise routing. The source code is available at https://github.com/jdding/DeltaGate.

Cross-domain sequential recommendation (CDSR) aims to model users' dynamic interest transitions and sequential patterns across multiple domains. Recently, generative recommendation (GR) has emerged. It first learns semantic identifiers (SIDs) from item semantics and formulates recommendation as autoregressive generation. However, existing methods face two critical issues: (1) they ignore collaborative correlations across domains during tokenization, and (2) they adopt inefficient decoding strategies, such as beam search, during generation, which hinders real-time deployment. To address these limitations, we propose GenCDSR, an effective and efficient generative framework for CDSR. Specifically, we design a cross-domain hybrid tokenization mechanism with a multi-tower architecture to jointly capture cross-domain commonalities and domain-specific distinctions through hierarchical shared-specific and fine-grained codebooks. Furthermore, we develop a cross-domain serial-parallel decoding strategy that leverages the hierarchical SID structure to partially parallelize generation, significantly reducing inference latency while preserving generation consistency. Experiments on three public datasets show that GenCDSR achieves an average accuracy improvement of 1.5 percent and an average inference latency reduction of 85.1 percent compared with state-of-the-art baselines. The implementation code and datasets are available online: https://github.com/Applied-Machine-Learning-Lab/RecSys2026_GenCDSR.

Recommender systems operate as Black-Boxes, leaving users and regulators unable to steer their outputs toward specific intentions or audit their behavior. This lack of controllability, defined as the system's ability to respond to explicit guidance, remains an unaddressed dimension in existing evaluation paradigms. To fill this gap, we propose CtrlBench-Rec, a collaborative multi-agent framework for systematic assessment of controllability. We formalize three fundamental tasks: target content discovery, interest profile shaping, and popularity bias mitigation, which together measure steerability from explicit commands to implicit representation steering and finally to overcoming algorithmic biases.Extensive experiments on real-world datasets and multiple recommendation models demonstrate that our framework effectively quantifies controllability and exposes critical system bottlenecks, most notably persistent resistance to guiding long tail content. CtrlBench-Rec provides the first standardized toolkit for controllable recommendation research, algorithmic auditing, and user empowerment. Our code is released on https://github.com/caskcsg/CtrlBenchRec.

Sequential recommender systems typically infer user preferences through single-pass encoding of interaction histories without iterative refinement, relying on increasingly deep architectures to capture complex patterns. In this work, we revisit sequential recommendation from a recursive inference perspective: can user preferences be modeled as a persistent latent state that is recursively refined? We propose RecRec (Recursive Recommendation), a lightweight model that maintains a compact latent state and updates it through a shared recursive module conditioned on interaction evidence. Unlike prior recursive models, RecRec introduces an evidence-anchored correction mechanism that stabilizes refinement by grounding each update in the original interaction context, preventing semantic drift during deep recursive reasoning. Experiments on three benchmark datasets under standard evaluation protocols show that RecRec matches or outperforms state-of-the-art sequential, graph-based, and reasoning-enhanced recommenders while using only 3.9M to 14M parameters. Ablation studies demonstrate that both recursive refinement and the evidence-anchored correction gate contribute significantly to performance, highlighting the effectiveness of recursive latent inference as a scalable alternative to deeper or language-based architectures. Code is available at https://anonymous.4open.science/r/RecRec-6B67/README.md.

The unfairness of recommender systems has become a topic of concern due to its significant social and ethical implications. Although existing works have shown the effectiveness of attacks on the performance of recommender systems (e.g., promotion and demotion attack), the study of fairness attacks on recommender systems remains largely under-explored. To this end, we propose a novel structure-aware reinforcement learning-based fairness attack method designed to exacerbate the unfairness of target recommender systems. Specifically, we first employ a graph-based structure encoder to model the structural dependencies among the generated fake user-item interactions and the original user-item interactions. Then, we model the sequential dependency of the injected fake items using a recurrent neural network. Based on the learned structure-aware and sequence-aware representations of the fake user and item, the item selection policy attentively decides the next injected fake item. Since the target recommender system may employ fairness-aware training and leverage the user's sensitive attribute information, such as gender, we further designed a gender selection policy to decide the gender of the entire fake user profile. Both the item selection and gender selection policy are learned jointly in our proposed method. Finally, experimental results on four types of target recommendation models and two real-world datasets demonstrate the effectiveness of the proposed attack method in exacerbating the unfairness of recommender systems.

Sequence learning has emerged as the promising paradigm in recommendation systems, surpassing traditional Deep Learning Recommendation Models (DLRM) by capturing the temporal nuances of user behavior. However, current state-of-the-art architectures operate under a limiting analogy: they treat user history as a monolithic chronological sequence like a sentence in a Large Language Model (LLM). We observe a fundamental divergence between natural language and recommendation data: unlike the linear, logical flow of text, user history is inherently multi-faceted. A user's journey is a fragmented reflection of diverse interests, resulting in much weaker coherence between items than is found in LLM training data. This lack of structural unity leads to context pollution. In single-sequence modeling, unrelated behaviors compete for the same attention budget. This "noisy" signal dilutes the model's focus, effectively capping its ability to discern high-intent patterns from background activity. To address this, we propose Constructive Multi-Sequence Learning (CMSL), a paradigm shift from passive sequence ingestion to active "context engineering" that constructs multiple coherent sequences in latent space. CMSL leverages a learnable Sequence Construction Module to disentangle user history into "pure" thematic strands, followed by a linear attention mechanism to efficiently model these strands at scale. CMSL has been deployed across ranking and retrieval tasks and across four major surfaces at Meta.

Digital platforms commonly optimize for satisfaction using signals such as ratings, likes, and sentiment, implicitly treating satisfaction as a proxy for user well-being. Psychological theory, however, characterizes well-being as a multidimensional construct that extends beyond satisfaction or short-term positivity. In this paper, we examine whether commonly used satisfaction signals capture expressions of well-being, and what types of content are associated with different well-being outcomes. Our study focuses on book consumption, a convenient domain wherein users engage substantially with fixed pieces of content and sometimes provide nuanced long-form feedback. Our results show that (a) rating scales and sentiment only loosely correlate with most facets of psychological well-being and (b) ratings and sentiment are more closely aligned with immediate and hedonic as opposed to enduring and eudaimonic expressions of well-being. Further, by linking reviews to book content, we find that themes related to values, and institutions like religion (Pearson r = 0.35) or human drives (r=.26) are associated with higher meaning and accomplishment respectively, while incivility (avg r = -.15) and past-focused language (avg r = -.12) are associated with lower well-being. These findings motivate richer outcome targets for content recommendation systems beyond satisfaction alone.

Search-augmented LLMs increasingly mediate everyday consumer recommendations by retrieving live web content. This creates a new risk: generative recommenders may consume polluted web content, such as fake reviews and promotional pages crafted to mislead recommendations. We ask: to what extent do search-augmented LLMs become unwitting promoters of fake products when consuming polluted retrieval results? To answer this, we introduce FORGE (Fake Online Recommendations in Generative Environments), a benchmark for measuring fake-product promotion under controlled web-content pollution. Given an upstream search result, FORGE locally rewrites real products in retrieved web pages into fake ones to simulate web-content pollution, and measures how often the LLM recommends the fake product. FORGE covers 225 real-world products across 15 categories and 5 consumer scenarios. Across 12 commercial and open-weights LLMs, all models are vulnerable: a single polluted page yields fooled rates of up to 27%, while the full top-3 replacement raises this to 73.8%. Vulnerability varies substantially across categories, increasing when models lack stable prior knowledge of the relevant products. Reasoning does not mitigate this vulnerability; instead, it often generates spurious social proof to justify false recommendations. We evaluate three defenses: skepticism prompting and consensus filtering (over model priors or cross-document evidence). Skepticism can exacerbate vulnerability, much like reasoning, while filtering risks suppressing legitimate products. We release FORGE at https://github.com/leoluolol/forge-benchmark.

Sequential recommendation aims to predict users' next interaction with items by analyzing their historical behavior. However, the limited quality of item representations remains a critical bottleneck. While pre-trained large language models (LLMs) can provide rich semantic representations, existing approaches only rely on static encoding of fixed attributes, overlooking the crucial role of target audiences in defining item identity. Moreover, the semantic space struggles to reflect actual user behavior, resulting in a significant gap between semantic representations and behavioral patterns. To address these limitations, we propose GenAIR, a general framework that empowers sequential recommendation with Generative Archetype-grounded Item Representations. Specifically, we first leverage an LLM to analyze item metadata and infer textual description of the Archetype, which represents the conceptual profile of the item's ideal target audience. We then extract the corresponding embeddings in a single forward pass. Further, to ground these generative archetypes in real-world behavior, we introduce a behavioral calibration objective, which explicitly incorporates behavioral signals from actual interactions. This objective adjusts the structure of the embedding space to reflect empirical patterns. GenAIR enables seamless integration with most existing models while maintaining high efficiency. Comprehensive experiments conducted on three real-world datasets demonstrate that GenAIR significantly improves the performance of various sequential recommendation models and consistently outperforms state-of-the-art baseline approaches. Implementation codes are available at https://github.com/AI-Santiago/GenAIR.

The ranking of recommendation algorithms is a challenging problem since model performance is sensitive to dataset characteristics such as sparsity, sequential structure, and scale. This drives a demand for a proper methodology for fair comparison between algorithms. Naive aggregation of performance metrics (e.g., averaging NDCG over benchmarks) can yield misleading rankings, undermining practical selection. To address this problem, we introduce a novel, data-driven ranking methodology based on Bradley-Terry (BT) model. We demonstrate that the obtained ranking depends on key dataset statistics. Additionally, we propose a novel metric for evaluating ranking consistency and demonstrate robustness of our ranking to incomplete data. Finally, we introduce a dataset-specific methodology for ranking algorithms on unseen datasets without running the models, relying on extensions of the Bradley-Terry framework, including BT trees and BT models with covariates.

Recently, Generative Recommenders (GRs) have emerged as a transformative recommendation paradigm by replacing traditional item IDs with semantic indices (SIDs). Owing to the exceptional generative capabilities of diffusion models, a few pioneering works explore developing GRs with diffusion architectures as the backbone. However, a fatal limitation of existing diffusion-based GRs is that the diffusion process applies uniformly to all items within the historical interactions. In contrast, the user preference is shaped by multifaceted time-evolving factors and thus exhibits a non-stationary distribution in the temporal aspect. To bridge this gap, this study proposes a novel GR framework, named TDPM, by designing the time-aware diffusion on SID tokens. Specifically, TDPM explicitly integrates the impact of time-evolving user preferences into the diffusion process. In detail, the user preference is disentangled into (i) the period preference, which remains consistent over a long time-span, and (ii) the point preference, which is triggered by recent focal events. Extensive experiments on three public real-world datasets demonstrate the significant superiority of TDPM over the state-of-the-art baselines. TDPM achieves average improvements of up to 29.21% and 25.45% in terms of HR@20 and NDCG@20, respectively. The ablation study further underscores the necessity of time-aware token diffusion in diffusion-based GRs.

Recommendation systems power engagement and monetization across feeds, ads, and short-video platforms, but translating the latest advances in Large Language Models into Recommendation Systems (RecSys) gains remains rare, particularly in advertising and production-scale real-world industry setups. Prior real-world LLM successes typically fall into three buckets: (a) generative retrieval that directly predicts the next items for candidate generation, (b) late-stage re-ranking that uses LLMs, and (c) auxiliary signal enrichment with LLMs. We introduce a complementary paradigm for ads: a fine-tuned open-source LLM used not as a ranker, but as an ads-specific ancillary predictor, forecasting likely advertisers from user profiles and histories. This LLM-driven advertiser prediction augments conventional candidate generation and provides informative priors to downstream ranking. Developed in a large-scale production advertising system, our approach produces substantial offline improvements and measurable online business impact, demonstrating that LLM world knowledge and predictive capacity can be efficiently harnessed. Beyond validating LLMs for ads applications, our results show that targeted ancillary predictions can unlock end-to-end gains across both retrieval and late-stage ranking, offering a practical path to LLM-enhanced recommendation at scale.

Reaction condition recommendation sits immediately after retrosynthetic disconnection selection, and in practice, chemists require both accurate predictions and the precedents that justify them. We present HiRes (Hierarchical Reaction Representations), a retrieval-augmented condition recommendation system whose learned reaction space serves as both a classifier feature and an inspectable precedent memory. The model combines a graph encoder, transformation-aware cross-attention, multi-stream reaction fusion, and a k-NN retrieval layer. HiRes achieves state-of-the-art performance among primary-slot USPTO-Condition models, reaching Catalyst, Solvent, and Reagent top-1 accuracies (Acc@1) of 0.929, 0.534, and 0.530 respectively. It ties the best reported baseline on Catalyst while outperforming models such as REACON on Solvent and Reagent. Furthermore, paired bootstrap analysis demonstrates that integrating retrieval with learned condition heads provides statistically significant gains for solvent and reagent selection over purely parametric approaches. Ultimately, HiRes bridges the gap between predictive accuracy and chemical interpretability, offering a single representation that supplies both competitive recommendations and the concrete chemical precedents necessary for practical synthesis planning.

Recently, Generative Recommenders (GRs), characterized by a unified end-to-end framework, have exhibited astonishing potential in transforming the recommendation paradigm. Despite their effectiveness, we recognize that GRs are still susceptible to the long-standing issue of popularity bias that has pervaded the recommendation community. Although a few studies have attempted to extend traditional debiasing methods to GRs, their effectiveness is marginal, and the fundamental reason why GRs suffer from popularity bias remains under-explored. To bridge this gap, this study focuses on two core aspects in GRs: the optimization of generative framework and the item tokenization based on semantic index. Based on theoretical analyses, we identify that the severe popularity bias emerges from the confluence of a token-level optimization flaw and the undifferentiated property of item tokenization. Accordingly, this study develops a novel generative recommender system, called Ghost, by designing the asymmetric unlikelihood optimization and the skeleton-founded tokenization. Extensive empirical evaluations across three datasets, alongside multiple SOTA baselines, reveal that Ghost substantially alleviates popularity bias and promotes fairer recommendations, while incurring slight degradation to the overall recommendation utility.

Off-policy evaluation (OPE) estimates the value of a target treatment policy (e.g., a recommender system) using data collected by a different logging policy. It enables high-stakes experimentation without live deployment, yet in practice accuracy depends heavily on the logging policy used to collect data for computing the estimate. We study how to design logging policies that minimize OPE error for given target policies. We characterize a fundamental reward-coverage tradeoff: concentrating probability mass on high-reward actions reduces variance but risks missing signal on actions the target policy may take. We propose a unifying framework for logging policy design and derive optimal policies in canonical informational regimes where the target policy and reward distribution are (i) known, (ii) unknown, and (iii) partially known through priors or noisy estimates at logging time. Our results provide actionable guidance for firms choosing among multiple candidate recommendation systems. We demonstrate the importance of treatment selection when gathering data for OPE, and describe theoretically optimal approaches when this is a firm's primary objective. We also distill practical design principles for selecting logging policies when operational constraints prevent implementing the theoretical optimum.

Follow-the-leader (FTL) motion exploits the unique morphology of continuum robots (CRs) to navigate confined spaces by having the body retrace the path of the tip. While extensively studied, existing FTL methods typically assume a fixed base or a single degree-of-freedom insertion mechanism, limiting their applicability to practical systems in which CRs are mounted on robotic manipulators with fully actuated SE(3) base pose. This paper presents a sampling-based motion planner for FTL motion of manipulator-mounted CRs that jointly considers robot configuration and base pose. The key idea is to decouple global shape search from base pose determination by computing the base pose through a closed-form geometric construction, thereby avoiding iterative optimization during online planning. The approach supports general forward models and enables efficient planning by shifting the majority of computation offline. We establish theoretical guarantees including resolution complete shape search and converging tip tracking throughout waypoint traversal and interpolation. Experiments on 120 simulated paths over 3 test classes demonstrate 0% tip error and 1.9% mean shape deviation (w.r.t. robot length) at 100% success rate. We validate the practicality of our approach on a 6-DOF tendon-driven CR mounted on a serial manipulator. Code and visualization available at https://continuumroboticslab.github.io/sb-ftl-cr-planner/.

Sequential recommendation has increasingly shifted toward generative recommenders that combine sequential patterns with semantic item information. Yet these methods are often evaluated on a small set of widely used benchmarks, raising a key question: do these benchmarks actually require the advanced modeling capabilities that modern generative recommenders claim to provide? We conduct a benchmark audit with an intentionally simple graph heuristic. Starting from only the last one or two interacted items, it retrieves candidates from a few-hop item-transition graph and ranks them by item-feature similarity. Despite using no sequence encoder, generative objective, or training, this heuristic matches or outperforms many modern baselines, with relative NDCG@10 improvements of 38.10% and 44.18% over the best competing baseline on Amazon Review Sports and CDs. We show that this behavior reflects shortcut solvability rather than an artifact of one heuristic. We identify three shortcut structures that can make next-item prediction easier than expected: low-branching local transitions, feature-smooth transitions, and limited dependence on long user histories. These shortcuts need not appear together; even one or two strong signals can make simple local retrieval highly competitive, while weakening them makes the benefits of more sophisticated models clearer. Across 14 datasets, model rankings vary substantially with dataset properties, yet the heuristic remains competitive on 10 of them. Our findings suggest that strong performance on standard benchmarks does not always demonstrate advanced sequential, semantic, or generative modeling ability. We call for more careful dataset selection and dataset-level diagnostic analysis when using benchmarks to support claims about new recommendation models.

Generative Recommender (GR) inference places embedding hot caches (EMB) and KV caches in direct competition for limited GPU HBM: allocating more memory to one improves its efficiency but degrades the other. Existing systems optimize them in isolation, overlooking that the optimal EMB-KV allocation ratio can shift by up to 0.35 across workload regimes, leaving 20-30% latency improvement unrealized. While online reallocation is required to close this gap, naive approaches introduce H2D refill traffic on the critical path, causing P99 SLO violations. To address this, we present HELM, which jointly manages HBM allocation and request routing at runtime through two key components: (1) Adaptive Memory Allocation, a three-layer PPO-based controller (frozen base policy, online residual adapter, and burst-aware recovery controller) that achieves $32\,\mathrm{μs}$ decision latency while staying within 0.024-0.029 of the offline-optimal ratio; and (2) EMB-KV-Aware Scheduling, which routes requests by jointly considering KV residency, embedding locality, and node load to avoid routing inefficiencies under heterogeneous allocations. Evaluations on three production-scale datasets over a 32-node A100 cluster show that HELM reduces P99 latency by 24-38% over the best static policy and achieves 93.5-99.6% SLO satisfaction across Steady, Trend, and Burst workloads, significantly outperforming state-of-the-art baselines without sacrificing throughput.

Reasoning-based Large Language Models (LLMs) like PO4ISR have set new benchmarks in session-based recommendation. However, the reproducibility of their reasoning capabilities across diverse semantic domains remains unexplored. In this work, we conduct a rigorous reproducibility study of PO4ISR to assess its generalization limits. Our analysis reveals a critical failure mode: standard reasoning prompts suffer from severe contextual drift in long sessions, leading to performance degradation on semantically complex datasets like Games and Bundle. To quantify and resolve this stability gap, we introduce PO4ISR++, a robustness-enhanced implementation that integrates reflexive prompting and consistent rank detection. Unlike the original static prompting strategy, our approach dynamically adapts to cross-domain cues. We benchmark both the original implementation and our robust variant on ML-1M, Games, and Bundle. Our results confirm that while the original model struggles in new domains, our reproducible extension restores performance, yielding a stabilized gain of up to 54% on Games and 96% on Bundle. We release open-source artifacts, including the reproduced baseline and our enhanced framework, to facilitate reliable future research in LLM-based recommendation.

Modern Deep Learning Recommendation Models (DLRMs) follow scaling laws with sequence length, driving the frontier toward ultra-long User Interaction History (UIH). However, the industry-standard "Fat Row" paradigm, which pre-materializes these sequences into every training example, creates a storage and I/O wall where data infrastructure usage exceeds GPU training capacity due to data redundancy that is amplified in multi-tenant environments where models with vastly different sequence length requirements share a union dataset. We present a \emph{versioned late materialization} paradigm that eliminates this redundancy by storing UIH once in a normalized, immutable tier and reconstructing sequences just-in-time during training via lightweight versioned pointers. The system ensures Online-to-Offline (O2O) consistency through a bifurcated protocol that prevents future leakage across both streaming and batch training, while a read-optimized immutable storage layer provides multi-dimensional projection pushdown for heterogeneous model tenants. Disaggregated data preprocessing with pipelined I/O prefetching and data-affinity optimizations masks the latency of training-time sequence reconstruction, keeping training throughput compute-bound by GPUs. Deployed on production DLRMs, the system reduces training data infrastructure resource usage while enabling aggressive sequence length scaling that delivers significant model quality gains, serving as the foundational data infrastructure for modern recommendation model architectures, including HSTU and ULTRA-HSTU.

Sequential Recommendation (SR) aims to predict the next interaction of a user based on their behavior sequence, where complementary relations often provide essential signals for predicting the next item. However, mainstream models relying on sparse co-purchase statistics often mistake spurious correlations (e.g., due to popularity bias) for true complementary relations. Identifying true complementary relations requires capturing the fine-grained item semantics (e.g., specifications) that simple cooccurrence statistics would be unable to model. While recent semantics-based methods utilize discrete semantic codes to represent items, they typically aggregate semantic codes into coarse item representations. This aggregation process blurs specific semantic details required to identify complementarity. To address these critical limitations and effectively leverage semantics for capturing reliable complementary relations, we propose a Complementary-Aware Semantic Transition (CAST) framework that introduces a new modeling paradigm built upon semantic-level transitions. Specifically, a semantic-level transition module is designed to model dynamic transitions directly in the discrete semantic code space, effectively capturing fine-grained semantic dependencies often lost in aggregated item representations. Then, a complementary prior injection module is designed to incorporate LLM-verified complementary priors into the attention mechanism, thereby prioritizing complementary patterns over co-occurrence statistics. Experiments on multiple e-commerce datasets demonstrate that CAST consistently outperforms the state-of-the-art approaches, achieving up to 17.6% Recall and 16.0% NDCG gains with 65x training acceleration. This validates its effectiveness and efficiency in uncovering latent item complementarity beyond statistics. The code will be released upon acceptance.

Personal Knowledge Graphs (PKGs) offer a privacy-preserving framework for modeling user preferences, yet constructing them from unstructured, decentralized conversational data remains a challenge. This paper bridges the gap between conversational "strings" and semantic "things" by presenting a reproducible pipeline for extracting structured user-preference triples using lightweight Large Language Models. We evaluate Qwen- and Gemma-based models on their ability to extract RDF-compliant triples linked to Wikidata identifiers from conversational data for PKG construction. Our evaluation assesses both the semantic extraction fidelity and the utility of the resulting graphs in a downstream recommendation task. We found that certain models performed well and had proportionally high downstream performance relative to their triple extraction performance.

The growing ubiquity of Extended Reality (XR) is driving Conversational Recommendation Systems (CRS) toward visually immersive experiences. We formalize this paradigm as Immersive CRS (ICRS), where recommended items are highlighted directly in the user's scene-based visual environment and augmented with in-situ labels. While item recommendation has been widely studied, the problem of how to select and evaluate which information to present as immersive labels remains an open problem. To this end, we introduce a principled categorization of information needs into explicit intent satisfaction and proactive information needs and use these to define novel evaluation metrics for item label selection. We benchmark IR-, LLM-, and VLM-based methods across three datasets and ICRS scenarios: fashion, movie recommendation, and retail shopping. Our evaluation reveals three important limitations of existing methods: (1) they fail to leverage scenario-specific information modalities (e.g., visual cues for fashion, meta-data for retail), (2) they present redundant information that is visually inferable, and (3) they poorly anticipate users' proactive information needs from explicit dialogue alone. In summary, this work provides both a novel evaluation paradigm for in-situ item labeling in ICRS and highlights key challenges for future work.

Recent studies increasingly explore Large Language Models (LLMs) as a new paradigm for recommendation systems due to their scalability and world knowledge. However, existing work has three key limitations: (1) most efforts focus on retrieval and ranking, while the reranking phase, critical for refining final recommendations, is largely overlooked; (2) LLMs are typically used in zero-shot or supervised fine-tuning settings, leaving their reasoning abilities, especially those enhanced through reinforcement learning (RL) and high-quality reasoning data, underexploited; (3) items are commonly represented by non-semantic IDs, creating major scalability challenges in industrial systems with billions of identifiers. To address these gaps, we propose the Generative Reasoning Reranker (GR2), an end-to-end framework with a three-stage training pipeline tailored for reranking. First, a pretrained LLM is mid-trained on semantic IDs encoded from non-semantic IDs via a tokenizer achieving $\ge$99% uniqueness. Next, a stronger larger-scale LLM generates high-quality reasoning traces through carefully designed prompting and rejection sampling, which are used for supervised fine-tuning to impart foundational reasoning skills. Finally, we apply Decoupled Clip and Dynamic sAmpling Policy Optimization (DAPO), enabling scalable RL supervision with verifiable rewards designed specifically for reranking. Experiments on two real-world datasets demonstrate GR2's effectiveness: it surpasses the state-of-the-art OneRec-Think by 2.4% in Recall@5 and 1.3% in NDCG@5. Ablations confirm that advanced reasoning traces yield substantial gains across metrics. We further find that RL reward design is crucial in reranking: LLMs tend to exploit reward hacking by preserving item order, motivating conditional verifiable rewards to mitigate this behavior and optimize reranking performance.

Conventional Sequential Recommender Systems (SRS) typically assign unique hash IDs (HID) to construct item embeddings, which mainly capture collaborative signals from historical user-item interactions. However, such embeddings are vulnerable in long-tail scenarios where most items are rarely consumed. Recent methods that incorporate auxiliary information often face noisy collaborative sharing from co-occurrence signals or semantic homogeneity caused by flat dense embeddings. In contrast, Semantic IDs (SID), with their support for code sharing and multi-granular semantic modeling, offer a promising alternative. Nevertheless, SID-based methods are hindered by a collaborative overwhelming phenomenon: commonly adopted quantization mechanisms compromise the identifier uniqueness needed to model head items, resulting in a performance trade-off between head and tail items. To address this challenge, we propose H2Rec, a novel framework that harmonizes SID and HID. We design a dual-branch modeling architecture that simultaneously captures the multi-granular semantics of SID while preserving the unique collaborative identity provided by HID. Moreover, we introduce a dual-level alignment strategy to bridge the two representations, enabling effective knowledge transfer and robust preference modeling. Extensive offline experiments on three public benchmarks and online experiments on a large-scale commercial platform demonstrate that H2Rec achieves a better balance between head and tail recommendation quality and consistently outperforms existing baselines.

Owing to the unprecedented capability in semantic understanding and logical reasoning, large language models (LLMs) have shown fantastic potential in developing next-generation sequential recommender systems (RSs). However, existing LLM-based sequential RSs mostly separate index generation from sequential recommendation, leading to insufficient integration between semantic information and collaborative information. On the other hand, the neglect of user-related information hinders LLM-based sequential RSs from exploiting high-order user-item interaction patterns. In this paper, we propose the End-to-End Dual Dynamic (ED$^2$) recommender, the first LLM-based sequential RS which adopts dual dynamic index mechanism, targeting resolving the above limitations simultaneously. The dual dynamic index mechanism can not only assembly index generation and sequential recommendation into a unified LLM-backbone pipeline, but also make it practical for LLM-based sequential recommender to take advantage of user-related information. Specifically, to facilitate the LLM comprehension ability to dual dynamic index, we propose a multigrained token regulator which constructs alignment supervision based on LLMs semantic knowledge across multiple representation granularities. Moreover, the associated user collection data and a series of novel instruction tuning tasks are specially customized to capture the high-order user-item interaction patterns. Extensive experiments on three public datasets demonstrate the superiority of ED$^2$, achieving an average improvement of 19.62% in Hit-Rate and 21.11% in NDCG.

Selecting an appropriate classification algorithm for a given data set remains a challenging problem in data mining and machine learning. Existing algorithm recommendation models are typically trained with individual learners and rely on only one type of meta-feature, which may limit their ability to capture the diverse characteristics of classification problems. This paper proposes a multi-view ensemble meta-learning framework for classification algorithm recommendation. The framework constructs base recommendation models from different combinations of heterogeneous meta-feature groups and combines them through an accuracy- and diversity-aware ensemble strategy. The main focus of this work is empirical: we evaluate the proposed method on 1,090 benchmark classification problems derived from 84 public data sets, using 13 widely used candidate classification algorithms and five types of meta-features. The experimental results show that the proposed ensemble recommendation method consistently improves ranking loss, average precision, and top-ranked recommendation precision over individual recommendation models. These results suggest that combining complementary meta-feature views is an effective strategy for robust classification algorithm recommendation.