Backstepping Control

We develop the first feedback design for rapid stabilization of the Kuramoto--Sivashinsky equation with a spatially varying anti-diffusion coefficient. For constant coefficients, the single-input Fredholm design of Coron and Lü (2015) excludes a discrete set of values at which repeated unstable eigenvalues cause a loss of controllability. We overcome this obstruction by introducing a second boundary input and assigning the two inputs distinct roles. The key idea, inspired by Heymann's Lemma, is to use the boundary value $u(0,t)$ entirely for a pre-feedback that renders the modified plant controllable through the curvature input $u_{xx}(0,t)$. The latter input then stabilizes the plant through a Fredholm backstepping transformation. We show that two inputs suffice for controllability and are necessary when the plant has an unstable double eigenvalue. However, the Fredholm kernel still must be approximated for implementation. Hence, to enable kernel and gain approximation, we prove continuity of the coefficient-to-gain design map on compact admissible design classes. Unlike Volterra-based continuity proofs using successive approximations, our proof uses the modal representation to control the spectral data, the inverse coefficient system, and the tails of the kernel and gain series. This yields a single neural operator approximation of the gain to any prescribed $L^2$ accuracy across the class. Finally, we establish rapid local stabilization of the nonlinear closed-loop system under both the exact gains and sufficiently accurate approximations. We conclude with numerical results that illustrate prescribed decay rates and the computational cost of the approximations. In particular, we train a Fourier neural operator that achieves typical relative gain errors of approximately $0.1\%$ and stabilizes all held-out cases tested, including a plant with an unstable double eigenvalue.

This paper addresses the control of multi-input strict-feedback nonlinear systems subject to a joint capacity constraint, in which the admissible input set is a coupled subset of the individual actuator limits. Unlike existing constraint-handling methods that enforce actuator bounds channel by channel and may unnecessarily suppress admissible control directions, we develop an Anisotropic Joint-Admissibility-Preserving Input Realization (AJ-APIR) framework that explicitly exploits the geometry of the joint constraint. The proposed realization constructs a state-dependent gain matrix whose spectral decomposition separates the commanded input into normal and tangential directions relative to the constraint boundary. The normal component is attenuated as the boundary is approached, while the tangential component is preserved, which allows the admissible control effort to be redistributed without loss of tracking authority. Integrated with a backstepping controller, the AJ-APIR framework guarantees forward invariance of the joint admissible set for all time. We establish exponential convergence of the tracking error to zero together with uniform boundedness of all closed-loop signals, and characterize the resulting command-demand behavior under the joint constraint. Simulation results for a representative second-order, two-input nonlinear system subject to a power-budget constraint demonstrate the efficacy of the proposed method to enforce the joint input constraint.

This paper considers robust nonadaptive regulation for general nonlinear systems in an output-feedback setting with arbitrarily high relative degree. We develop a nonadaptive design that combines an input-driven filter and a generic internal model with a recursive backstepping law, thereby recasting the regulation problem as the robust input-to-state stabilization of an augmented error system. Unlike adaptive schemes, the proposed method does not rely on linearly parameterized regressors and does not require the construction of Lyapunov functions having merely nonpositive derivatives. Under standard assumptions on the exosystem, including purely imaginary and simple eigenvalues, together with a minimum-phase input-to-state stability condition on the internal dynamics, we establish global asymptotic regulation and derive explicit, verifiable inequalities for selecting the design gains. The resulting nonadaptive framework guarantees convergence of the estimation and tracking errors even when the controlled-system dynamics are complex or only partially known. The effectiveness of the theoretical results is demonstrated using a benchmark controlled Duffing system.

This paper develops Admissibility-Preserving Control (APC), a realization-centered safety-critical control framework for strict-feedback systems subject to asymmetric actuator limits, time-varying output constraints, and actuator-rate limitations. APC denotes the overall control architecture, whereas an Admissibility-Preserving Input Realization (APIR) denotes its constraint-realization module. Therein, the APIR dynamically generates the physical plant input while rendering its prescribed asymmetric actuator set forward invariant. In contrast to algebraic clipping and post-design saturation compensation, the actuator limits are embedded directly in a continuously differentiable dynamic realization with user-selectable regularity and interpretable tuning parameters. The APIR is integrated with recursive backstepping by treating the realized plant input as an additional state. The resulting design does not require an input-to-state stability assumption on the uncontrolled plant. Instead, the nonlinear drift terms are compensated recursively, subject to an explicit compatibility condition between the desired motion, the available control authority, and the APIR interior gain. The framework is further extended to time-varying output-safe tracking through a smooth asymmetric logarithmic barrier coordinate and its associated Lyapunov function and to simultaneous actuator-magnitude and rate constraints through a cascaded APIR. Rigorous Lyapunov and invariance analyses establish regional asymptotic tracking, forward invariance of the compatible admissible sets, and boundedness of all closed-loop signals. Numerical studies illustrate asymmetric actuator utilization, output-safety preservation, and magnitude-rate constraint enforcement.

At parking speeds, the kinematic bicycle is the prevailing model for car-like vehicles. Yet, despite its wide use, stabilizing feedback laws for this system are scarce in the literature, and existing designs often do not reproduce realistic parking maneuvers. This limitation is inherent to the Cartesian coordinates, where Brockett's condition rules out smooth static feedback stabilization. We bypass this obstruction by transforming the system into polar coordinates together with additional range-normalized coordinates that encode the geometry of human-like parking maneuvers. In the transformed coordinates, the dynamics take a strict-feedback form, enabling a nonconventional backstepping design. We exploit the particular structure to develop smooth feedback laws that achieve global exponential stabilization in the transformed coordinates which in turn generates parking trajectories resembling the one performed by human drivers through feedback alone.

This paper presents QuadRocket, a quadrotor-based rocket prototype that provides a low-cost, low-risk platform for validating advanced thrust-vector control strategies for launch vehicle-type systems. The prototype consists of a cylindrical main body mounted on top of a quadrotor through a universal joint, forming a flying inverted pendulum with non-negligible inertia. For control design, the coupled system is modeled as a single axisymmetric rigid body actuated by a vectored force applied along its longitudinal axis. A reduced-attitude representation on the two sphere is adopted to explicitly exploit the vehicle's axial symmetry and to decouple yaw from the thrust-vector direction. On this model, we derive an adaptive backstepping controller that achieves almost global trajectory tracking in the presence of unknown constant disturbances, while a control-point transformation mitigates non minimum-phase behavior. The quadrotor is then treated as a thrust vector actuator, and a dynamic-surface-based attitude controller is designed to track the desired thrust-vector, accounting for actuation dynamics and avoiding explicit differentiation of virtual control signals. The complete architecture is evaluated in simulation and validated experimentally in an indoor motion-capture arena. Results demonstrate accurate trajectory tracking, effective disturbance compensation, and confirm the suitability of the QuadRocket as a versatile testbed for thrust-vector-controlled robotic vehicles.

Flexible robotic manipulators (FRMs) offer advantages in lightweight design and large workspace, but their structural flexibility induces vibrations, accelerates fatigue, degrades tracking performance, and limits operational speed. These challenges are further amplified in multi-link serial manipulators, where increased overall length leads to greater structural flexibility. This article presents a backstepping output-feedback framework for fast vibration suppression and tip tracking of an n-degree-of-freedom serial flexible manipulator robot (nDSFMR), with a DeepONet-based approximation for practical deployment. Each link-joint is modeled as a Timoshenko beam coupled with an ODE and transformed into a canonical hyperbolic PDE with boundary dynamics. A backstepping-based boundary controller at the joint is developed to equivalently inject distributed damping along the beam, enabling rapid vibration suppression and trajectory tracking, only using available boundary measurements. To enable real-time implementation and scalability, a DeepONet neural operator is introduced to approximate the backstepping kernels, significantly reducing computational cost and facilitating fast controller updates under varying operating conditions. Experiments on a two-link flexible manipulator demonstrate faster vibration suppression and convergence of the end-effector to the desired trajectory, compared with a linear quadratic regulator (LQR) with feedforward control.

This paper presents a Robust Adaptive Backstepping Impedance Control (RABIC) strategy for robots operating in contact-rich and uncertain environments. The proposed control strategy considers the complete coupled dynamics of the system and explicitly accounts for key sources of uncertainty, including external disturbances and unmodeled dynamics, while not requiring the robot's dynamic parameters in implementation. We propose a backstepping-based adaptive impedance control scheme for the inner loop to track the reference impedance model. To handle uncertainties, we employ a Taylor series-based estimator for system dynamics and an adaptive estimator for determining the upper bound of external forces. Stability analysis demonstrates the semi-global practical finite-time stability of the overall system. To demonstrate the effectiveness of the proposed method, a simulated mobile manipulator scenario and experimental evaluations on a real Franka Emika Panda robot were conducted. The proposed approach exhibits safer performance compared to PD control while ensuring trajectory tracking and force monitoring. Overall, the RABIC framework provides a solid basis for future research on adaptive and learning-based impedance control for coupled mobile and fixed serially linked manipulators.