Joint Channel Estimation

In sub-terahertz (sub-THz) communications, the coupling of ultra-wide bandwidth and severe phase noise (PN) impairments renders conventional joint channel and PN estimation highly complex and computationally prohibitive. To address this, we propose CRFCAN, a complex-valued residual FFT convolutional attention network designed for joint channel and PN estimation. Unlike existing deep learning schemes that rely on cascaded networks or hybrid frameworks combining neural networks with conventional iterative estimators, CRFCAN performs joint recovery in a truly end-to-end fashion through a physics-inspired cross-domain structure. Specifically, Fast Fourier Transform (FFT) and inverse FFT modules are embedded within residual groups to enable iterative feature interaction across the time and frequency domains, thereby capturing both frequency-selective fading and time-varying phase distortions. In addition, two dedicated residual blocks are introduced for complex feature extraction and multiplicative phase-distortion modeling, respectively. A physics-aware PN output tail with soft normalization is further employed to improve estimation stability while preserving the physical characteristics of the effective PN process. Simulation results demonstrate that CRFCAN significantly outperforms conventional algorithms and state-of-the-art deep learning models in terms of normalized mean square error (NMSE) and bit error rate (BER). Notably, CRFCAN achieves superior performance with single-shot, fixed-complexity inference and generalizes well to unseen PN models without fine-tuning, highlighting its robustness and practicality for sub-THz receivers.

Deep learning models, notably Long Short-Term Memory (LSTM), have demonstrated promising performance in channel estimation for high-mobility vehicular environments. However, their black-box nature and architectural overhead limit trustworthiness and efficiency. Classical explainable AI (XAI) methods rely on costly iterative processes, offering only input-level filtering without addressing architectural fine-tuning. To overcome these limitations, this paper proposes the XAI-assisted Recurrent neural network Attribution for Channel Estimation (X-RACE) framework. X-RACE uses a low-complexity, one-shot dual-optimization strategy to simultaneously evaluate and prune irrelevant input subcarriers and internal hidden units. Furthermore, we propose novel temporal XAI metrics: Saturation Time, Importance Drift, and Relevance Contrast to characterize the LSTM's learning dynamics and memory convergence. Extensive simulations demonstrate that X-RACE reduces inference complexity by at least 44.1% while improving or preserving Bit Error Rate (BER) performance, outperforming classical XAI schemes.

Most single-channel separators estimate a source by applying a real gain to the mixture in each time-frequency bin. The optimum of that format, which the oracle masks used as bounds do not attain, is the orthogonal projection of the source onto the line spanned by the mixture, its residual set by the angle between them. Locating an estimator reduces to the block structure of a real-linear operator on stacked spectra, giving a chain of four nested classes whose three larger terms match three assumptions on the prior: zero means, circularity and absence of inter-frequency coupling. Held fixed the chain is a cascade of four orthogonal projections; refitted per frame it collapses onto its first term, attributing the whole residual to one missing real parameter per bin, the phase. When the phase posterior is symmetric about the mixture direction, the minimum mean-square estimate falls back onto the line, with gain the posterior mean of the oracle gain and excess error its variance. On MUSDB18 a posterior mean under a non-circular Gaussian-mixture prior leaves the class yet stays 11.44 dB under the per-frame ceiling, which four times as many components and 7.5x the data do not close; a closed-form gate attributes some 70% of it, in decibels, to the predicted variance. The widest fixed class stays 6.70 dB under the same ceiling. Leaving the class and minimising squared error are conflicting requests: the barrier lies in the criterion rather than in the prior.

Accurate multipath parameter estimation is critical for modern wireless communication systems, particularly in challenging low-SNR environments. Traditional Maximum Likelihood Estimation algorithms, such as CLEAN, provide high-resolution parameter extraction but suffer from prohibitive computational complexity due to exhaustive grid search. Conversely, purely data-driven deep learning approaches lack physical grounding and struggle to generalize across variable multipath densities and off-grid parameters. To address these limitations, this paper proposes Neural Network-Assisted CLEAN (NN-CLEAN), a hybrid framework that embeds a multi-head residual network directly into the iterative CLEAN extraction loop. By replacing the exhaustive grid search with rapid, parallelizable forward passes while delegating residual subtraction to exact mathematical models, NN-CLEAN isolates physical multipath parameters without accumulating non- physical errors. Extensive Monte Carlo simulations demonstrate that NN-CLEAN achieves estimation accuracy exceeding 96% at 5 dB SNR, matching the traditional Grid-Search CLEAN (GS- CLEAN) baseline, while providing a massive reduction in computational complexity and substantially outperforming subspace methods and standalone one-shot neural networks. Crucially, NN-CLEAN exhibits a near-flat scaling in execution runtime and memory consumption as batch sizes increase. This highly efficient parallelization establishes NN-CLEAN as a robust, real- time solution for channel estimation in MIMO systems.

Extremely large-scale reconfigurable intelligent surface (XL-RIS)-assisted communication is regarded as a key enabling technology for future 6G networks. However, hybrid-field channel estimation for XL-RIS-assisted systems is challenging due to the high-dimensional cascaded channel and the coexistence of far-field and near-field propagation. In this case, traditional full-dimensional sparse recovery methods require a large cascaded dictionary and suffer from severe computational and storage burdens. To address these challenges, we develop a double-timescale channel estimation framework that decouples sparse dictionary representation and recovery. Then, by exploiting the quasi-static property of the channel at the base station (BS) and RIS side, we propose a Dirichlet kernel-based off-grid dictionary compression (DK-ODC) scheme for sparse representation, which reduces the dimension of the corresponding dictionary as well as mitigates BS-side angular off-grid error. Furthermore, for the dynamic channel at the user equipment (UE) and RIS side, we propose a subspace-aware incremental variational Bayesian learning (SI-VBL) algorithm, which enables incremental learning of sparse channels by exploiting the identified low-dimensional subspace and pruning threshold. Analysis and simulation results confirm that the proposed framework avoids full-dimensional Bayesian recovery and achieves a favorable tradeoff among estimation accuracy, computational complexity, and storage overhead.

In multiple-input multiple-output (MIMO) semantic communication, imperfect channel state information (CSI) and equalization mismatch can seriously degrade semantic reconstruction quality. To address this issue, we propose a unified restoration flow matching (RFM)-based framework for channel refinement and equalization correction. Specifically, the channel RFM (CRFM) module is developed to refine the coarse channel, thereby improving channel estimation accuracy. Based on the refined channel, the developed semantic RFM (SRFM) module is employed to correct the residual distortions in the post-equalization latent space. The key idea is to formulate the two cascaded inverse problems of channel estimation and equalization as the unified conditional restoration task, in which the learned conditional velocity field guides the perturbed distribution towards the target distribution. To enhance the robustness of these two modules under various distortion conditions, we develop a dual-anchor perturbation training strategy that jointly learns near-manifold refinement and large-error correction, and implement inference through a few-step deterministic ordinary differential equation (ODE) solver. Extensive experiments on MIMO channels and visual semantic transmission tasks demonstrate that the proposed scheme improves key metrics for channel estimation and semantic reconstruction quality. Moreover, compared with representative diffusion-based generative baselines, the proposed method requires fewer sampling steps.

Narrowband interference (NBI) severely degrades orthogonal frequency-division multiplexing (OFDM) systems by corrupting subcarriers and rendering classical soft demodulation ineffective. Conventional compressed-sensing (CS) mitigation exhibits high sequential latency and leaves structured, non-Gaussian residuals that cause log-likelihood ratio (LLR) unreliability, decoder saturation, and severe error floors when employing classical Gaussian demappers. We resolve this pipeline mismatch using a unified deep learning framework for joint NBI cancellation and robust soft demodulation. First, NBI-CNet employs a physics-informed convolutional architecture to estimate NBI parameters and remove multi-tone interference in a single forward pass. Without requiring prior knowledge of the active interferer count, NBI-CNet reduces computational complexity by up to 60% ($N{=}2048, Q{=}64$) compared to the state-of-the-art EOMP-IDS algorithm. Second, LLR-CNet acts as a structural whitener by mapping non-Gaussian post-mitigation residuals onto well-calibrated soft metrics. Simulations demonstrate that this joint framework eliminates the error floors inherent to traditional baselines across dense grids. Under severe interference ($\text{SIR}{=}{-}10$ dB), the pipeline operates within a $0.2$ to $0.5$ dB SNR margin of the optimal iterative baseline at a target block error rate (BLER) of $10^{-4}$. Under mild interference ($\text{SIR}{=}10$ dB) with heavy spectral overlap ($Q{=}12$), where classical greedy algorithms erroneously subtract valid data components and corrupt the payload, NBI-CNet avoids signal-peak confusion to deliver a coding gain exceeding $3$ dB. Finally, the architecture circumvents the $2{\times}10^{-4}$ error floor triggered by interferer-estimation errors, while its scale-invariant design enables robust generalization across arbitrary FFT sizes without retraining.

Hardware impairments in massive multiple-input multiple-output (MIMO) receivers introduce inter-symbol memory and inter-element coupling, severely degrading channel estimation. This paper employs a residual recurrent gated unit (RGRU) to model the intra-slot memory of the hardware impairments and proposes a message-passing-based two-timescale Bayesian deep learning (MP-TTBDL) framework for joint channel and impairment tracking. Owing to small-scale fading, the wireless channel varies rapidly across slots, whereas hardware impairments drift slowly due to hardware aging and environmental variations. To capture these distinct physical timescales, a fastvarying Markov prior and a slow-varying Gaussian Markov prior are assigned to the sparse channel and the network parameters, respectively. Based on a multi-slot factor graph formulation, a message-passing algorithm is developed. Specifically, the inter-slot messages admit closed-form updates, while the intra-slot factor graph, due to its complex recurrent structure, is partitioned into a channel tracking module and an impairments calibration module. The channel tracking module performs sparse channel estimation via turbo orthogonal approximate message passing (Turbo-OAMP), and the impairments calibration module updates the impairment parameters via a specially designed deep approximate message passing (DAMP) procedure, with the two modules iteratively exchanging extrinsic information through expectation propagation (EP) until convergence. Simulation results show that the proposed framework robustly achieves lower channel estimation error than conventional compensators followed by channel estimation across different online impairment scenarios and signal-to-noise ratio (SNR) conditions.

Designing effective feature extractors is critical for blind signal analysis tasks such as automatic modulation recognition (AMR), signal scheme recognition (SSR), and \color{black} signal structure parsing (SSP). In this work, we propose dual-channel neural network (DualNN) that efficiently exploits complex-valued signals through parameter sharing across IQ channels. Unlike traditional real-valued or complex-valued models, DualNN is a groundbreaking framework which shares the network parameters for processing the real and imaginary parts of the complex-valued signals, and is theoretically shown to reduce generalization error while preserving expressive capacity. Specifically, we propose a novel Transformer-based architecture to implement DualNN, called Dualformer. The Dualformer segments input signals into patch-level tokens and captures multi-granularity features, enabling robust performance across diverse signal analysis tasks. Furthermore, we conduct extensive experiments comparing Dualformer with three Transformer-based baselines and four conventional DL-based approaches. Results demonstrate consistent performance improvements on AMR, SSR, and SSP tasks. Besides, the modular design of DualNN allows it to generalize well to blind signal processing tasks such as blind source separation and low-SNR spectrum sensing. This work paves the way for a broader application of DualNN architectures in unsupervised and weakly supervised complex-valued signal analysis scenarios.

In next-generation wireless networks, the growing density of devices and limited spectrum resources pose severe jamming challenges to fragile legitimate communication links in the wireless electromagnetic environment. Crucially, when jamming overlaps with pilot and data symbols in both time and frequency domains, it inflicts a severe bottleneck on receiver-side joint estimation and detection. Existing schemes often lack an effective framework to combat such jamming contamination, thereby failing to guarantee reliable transmission. To address this issue, we propose a Brownian bridge diffusion-based joint channel estimation and data detection framework (BBD-JCED) for jamming-resilient receivers. Specifically, the proposed framework comprises two core modules: the first extracts jamming features in the short-time Fourier transform (STFT) domain and suppresses jamming samples, thereby improving the signal-to-jamming-plus-noise ratio (SJNR) of the received signal; the second introduces a Brownian bridge diffusion (BBD) process to model the evolution of the suppressed signal and the encoded bits in the presence of channel estimation errors, thereby enabling enhanced joint channel estimation and data detection. To alleviate the computational burden of the BBD process in the second module, we further derive a fast ordinary differential equation (ODE) solver that enables its low-complexity iterative evolution. Finally, we design a multi-module training algorithm to improve the data recovery capability of the proposed framework. Simulation results demonstrate that the proposed framework achieves superior bit recovery performance compared with baseline schemes while maintaining a lower number of model parameters and competitive computational complexity.

Driven by their remarkable success in computer vision and inverse problem solving, score-based models are increasingly applied to wireless communications, where they show promise across a range of physical-layer tasks. However, despite this growing interest, the current literature often lacks a rigorous analysis of when score-matching offers a tangible advantage over traditional discriminative learning. This paper aims to address this gap through the use-case of channel estimation, a fundamental inverse problem in wireless systems. We present a theoretically grounded interpretation of score-based channel estimation through the lens of the perception-distortion tradeoff, identifying the conditions where score matching excels as well as its key limitations. In particular, by modeling downstream wireless tasks (e.g., capacity maximization) as functionals of the channel estimation process, we quantify the excess risk incurred by standard distortion-minimization approaches. Extensive numerical results show that under high predictive uncertainty, the large excess risk gap can be offset by score-based estimation, enabling near Bayesian-optimal precoding via the learned posterior, whereas in the low predictive uncertainty regime, discriminative distortion-minimization approaches are preferable due to lower complexity and more efficient use of model capacity.

Multi-channel mixed-SNR training improves out-of-distribution (OOD) generalisation of deep learning channel estimators for IEEE 802.11p vehicular communications, yet the internal mechanism responsible for this remains unexplained. This work presents REACH (Relevance-based Explanation and Architectural Compression for cHannel estimators), a gradient-based interpretability framework that operates at two levels. Input-level attribution identifies a subset of time-frequency features consistently relevant across all evaluated channel conditions, enabling input dimensionality reduction with minimal performance loss. Filter-level attribution reveals a near-universal internal representation, providing a representational account of the observed OOD generalisation. Guided by the resulting filter taxonomy, relevance-guided architecture compression substantially reduces both the number of parameters and the number of floating-point operations (FLOPs) with sub-1 dB normalised mean square error (NMSE) degradation, and OOD generalisation degrades more slowly than within-distribution accuracy under increasing compression.

Non-terrestrial networks (NTNs) are expected to play a pivotal role in sixth-generation (6G) systems by enabling ubiquitous connectivity and massive communication. In this context, channel prediction emerges as a key technique to improve the spectrum utilization efficiency by limiting the pilot overhead. However, many proposed predictors based on artificial intelligence (AI) are characterized by high inference complexity, posing challenges to onboard implementation. In this paper, we address the challenge of designing accurate yet computationally efficient channel prediction techniques tailored to low Earth orbit (LEO) NTNs, where strict power constraints limit model complexity, to enable spectral efficiency gains. We propose an iterative joint channel estimation and prediction framework in the context of 6G NTNs that significantly reduces pilot overhead by transmitting pilots only in the initial slot and relying on data-driven processing for subsequent slots. We introduce Data-driven Refinement and Iterative Forecast for wireless channel Tracking (DRIFT), a lightweight architecture that refines data-aided channel estimates and predicts future channel frequency responses with low computational cost and reduced error propagation. Two predictor variants based on convolutional and long short-term memory layers are investigated. Simulation results in an end-to-end simulation of an uplink LEO NTN scenario show that the proposed approach achieves up to 12% spectral efficiency gain compared to conventional pilot-based systems, with robustness to training-test mismatches and consistent performance across different channel models. Moreover, DRIFT requires fewer than 200k multiply-accumulate operations, making it suitable for on-board satellite implementation under stringent power constraints.

Wideband channel estimation (CE) in high-mobility scenarios remains challenging because channel responses vary rapidly, while practical systems can allocate only sparse pilots to accommodate dense users. Fortunately, many high-mobility environments, such as high-speed railways, exhibit scheduled trajectories, predictable velocities, and a limited number of dominant propagation paths. These properties induce a delay--beam power spectrum that is more stable than the instantaneous complex channel frequency response (CFR), less sensitive to the random phase coherence, and rich in geometric information. To exploit such environmental properties, we propose GeoGS-CE, a two-stage channel estimation framework for sparse-pilot high-mobility scenarios. In the offline stage, GeoGS-CE jointly models: 1) a scene-level 3D Gaussian representation that captures the non-line-of-sight (NLoS) geometric scattering support, and 2) a leakage-aware differentiable wireless rendering process that maps the NLoS Gaussians, together with an explicit virtual line-of-sight (LoS) component, to the measured delay--beam power spectrum, while accounting for practical OFDM delay and array leakage effects. In the online stage, the delay--beam power spectrum is predicted for each user location and used as a strong covariance prior, enabling accurate full-band and full-array CFR reconstruction and tracking through a linear MMSE estimator. Simulations based on channels generated from a segment of the Guangshen high-speed railway show that the proposed geometric prior substantially improves CFR reconstruction over pilot-only and non-geometric baselines.

Intelligent Reflecting Surfaces (IRSs) are a promising technology for enhancing the spectral and energy efficiency of millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems. In these systems, accurate channel estimation remains challenging due to the passive nature of IRS elements and the high pilot overhead in large-scale deployments. This paper presents a deep learning-based Multi-Block Attention (MBA) framework for efficient cascaded channel estimation in IRS-assisted mmWave MIMO systems that utilize orthogonal frequency division multiplexing (OFDM). First, we show the optimality of the discrete Fourier transform (DFT) and Hadamard matrices as phase configurations for least squares (LS) estimation. To reduce training overhead, we selectively deactivate IRS elements and compensate for induced feature loss using a two-stage architecture: (i) a Convolutional Attention Network (CAN) for spatial correlation recovery and (ii) a Complex Multi-Convolutional Network (CMN) for noise suppression. The MBA architecture mitigates error propagation through attention-guided feature refinement and denoising. Simulation results indicate that the MBA method reduces pilot overhead by up to 87% compared to the LS estimator. Additionally, at signal-to-noise ratios of 10 dB, our proposed method achieves approximately 51% lower normalized mean squared error (NMSE) than leading methods. It also maintains low computational complexity and adapts effectively to various propagation environments.

The integration of terahertz communications and ultra-massive multiple-input multiple-output (UM-MIMO) systems in 6G networks is motivated by their ability to enable unprecedented data rates, mitigate spectrum congestion, and enhance overall network performance. However, the enlarged antenna apertures and higher carrier frequencies in these systems increase the Rayleigh distance, causing users to span both the near-field and conventional far-field regions. Accurate spatial precoding thus requires exact channel estimation at the base station - a task made more challenging by the hybrid coexistence of near- and far-field effects and the limited number of digital chains available in hybrid beamforming architectures. In this paper, we propose a block recurrent transformer model to address this challenge. We demonstrate that a single transformer block equipped with state memory can be trained once and then iteratively applied for hybrid-field channel estimation. Furthermore, we train the model such that it generalizes to wireless channels with varying scatterer distances, different numbers of propagation paths, and wideband operation. Simulation results show that the proposed method achieves performance gains of approximately 5 dB and 7.5 dB in normalized mean squared error (NMSE) over state-of-the-art solutions in narrowband and wideband scenarios, respectively.

Channel-gain maps provide the channel gain between any two locations in a geographical region. They find numerous applications, from resource allocation and interference control to path planning for autonomous vehicles. Channel-gain map estimation (CGME) is considerably more challenging than conventional radio map estimation (RME) because channel-gain maps are functions over a 6-dimensional input space. This calls for specialized methods, which currently rely on the (inaccurate) radio tomographic model or require a prohibitively large number of measurements since they do not exploit any spatial structure. This paper overcomes this issue by leveraging spatial patterns that channel-gain maps exhibit across environments, as dictated by the laws of physics and typical environmental characteristics (e.g. building materials and layouts). Adopting a metalearning perspective, a transformer-based estimator is proposed to implicitly learn this common structure from measurements collected in multiple environments. This enables CGME in new environments from significantly fewer measurements (five times less in our experiments). To maximize learning efficiency, the transformer is composed with a feature map that enforces the invariances of CGME, such as those following from reciprocity. Numerical experiments corroborate the merits of the proposed estimator relative to existing methods.

Channel estimation is crucial in 5G communication networks for optimizing transmission parameters and ensuring reliable, high-speed communication. However, the use of multiple-input and multiple-output (MIMO) and millimeter-wave (mmWave) in 5G networks presents challenges in achieving accurate estimation under strict latency requirements on resource-limited hardware platforms. To address these challenges, we propose SwiftChannel, an algorithm-hardware co-design framework that integrates a hardware-friendly deep learning-based channel estimator with a dedicated accelerator. Our approach employs a convolutional neural network enhanced with a parameter-free attention mechanism, which effectively reconstructs full-resolution spatial-frequency domain channel matrices from low-resolution least squares (LS) estimates. We further develop a multi-stage model compression pipeline combining knowledge distillation, convolution re-parameterization, and quantization-aware training, resulting in substantial model size reduction with negligible accuracy loss. The hardware accelerator, implementing the compressed model and the LS estimator on FPGA platforms using High-level Synthesis (HLS), features a fine-grained pipeline architecture and optimized dataflow strategies. Tested on a Zynq UltraScale+ RFSoC, the accelerator achieves sub-millisecond latency, providing up to 24x speed-up and over 33x improvement in energy efficiency compared to GPU-based solutions. Extensive evaluations demonstrate that the proposed design generalizes not only across various noise levels and user mobilities, but also to a variety of unseen channel profiles, outperforming state-of-the-art baselines. By unifying algorithmic innovation with hardware-aware design, our work presents a future-proof channel estimation solution for 5G MIMO systems.

An evolution of Wireless Communications towards 5G and beyond provides improved user experience in terms of quality of services. Understanding and estimating Channel information plays crucial role in providing better user experience. Traditional methods of channel estimation involves periodically sending pilots (known signals), estimating channel and send back estimated channel information to the BS which increases computational complexity and communication complexity. Hence, we focus on data driven approach for channel estimation. In this work, we explore a channel estimation mechanism at 7GHz frequency band for a given user location. This work involves data generation using Ray tracing mechanism and Machine learning model training that contains feature variables such as transmitter location, user location and target variable as channel coefficient . We explored Support Vector Regression, K-nearest neighbor (KNN), Random Forest, XGBoost and MLP. We found via simulations that XG Boost and proposed MLP performs better than Support Vector Regression, KNN and Random forest regression.

Ultra-reliable and low-latency communication (URLLC) will play a key role in fifth-generation (5G) and beyond networks, enabling mission-critical applications. Meeting the stringent URLLC requirements, characterized by extremely low packet error rates and minimal latency, calls for advanced statistical modeling to accurately capture rare events in wireless channels. Traditional methods, such as those that rely on large datasets and computationally intensive estimation techniques, often fail in real-time scenarios. In this paper, a novel framework is proposed to meet URLLC requirements through a synergistic integration of extreme value theory (EVT) with generative artificial intelligence (AI). EVT is used to model channel tail distributions, providing an accurate characterization of rare events. Concurrently, generative AI enables data augmentation and channel parameter estimation from limited samples. The integration of EVT with generative AI can thus help overcome the limitations of generative models in capturing extreme events during channel characterization. Using an experimental dataset collected from an automotive environment, it is demonstrated that this integration enhances data augmentation for extreme quantiles, while requiring fewer samples than traditional analytical EVT methods and generative baselines in online estimation of channel distribution.

Accurate yet low-latency channel state information (CSI) acquisition is essential for multiple-input multiple-output (MIMO) communication systems. While advanced deep generative models, such as score-based and diffusion models, enable high-fidelity CSI reconstruction from limited pilot observations, they often suffer from high inference latency. To achieve accurate CSI estimation under stringent latency constraints, this paper proposes a null-space flow matching (FM) framework that decomposes pilot-limited MIMO channel estimation into a range-space reconstruction problem and a null-space generation problem. Specifically, the range-space component of the channel is directly recovered from noisy pilot observations, while only the ambiguous null-space component is iteratively refined using an FM-based generative prior. To further improve the robustness of the proposed framework, we introduce a power-law time schedule to better allocate the limited number of refinement steps, along with a noise-aware adaptive correction strategy to suppress channel noise on the refinement trajectory. Experimental results demonstrate that our method achieves a competitive normalized mean square error (NMSE) even under a strict latency budget of around 3 ms, while delivering superior estimation accuracy and faster inference than both model-based and generative baselines.

In general, reliable communication via multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) requires accurate channel estimation at the receiver. The existing literature largely focuses on denoising methods for channel estimation that depend on either (i) channel analysis in the time-domain with prior channel knowledge or (ii) supervised learning techniques which require large pre-labeled datasets for training. To address these limitations, we present a frequency-domain denoising method based on a reinforcement learning framework that does not need a priori channel knowledge and pre-labeled data. Our methodology includes a new successive channel denoising process based on channel curvature computation, for which we obtain a channel curvature magnitude threshold to identify unreliable channel estimates. Based on this process, we formulate the denoising mechanism as a Markov decision process, where we define the actions through a geometry-based channel estimation update, and the reward function based on a policy that reduces mean squared error (MSE). We then resort to Q-learning to update the channel estimates. Numerical results verify that our denoising algorithm can successfully mitigate noise in channel estimates. In particular, our algorithm provides a significant improvement over the practical least squares (LS) estimation method and provides performance that approaches that of the ideal linear minimum mean square error (LMMSE) estimation with perfect knowledge of channel statistics.