Sep 15, 2026, cs.CVJ/K move · Enter open · S save
Seung Jae Lieu, Diego Morra, Chiara Cadoni, Wonseop Song+2
Senseable City Lab Massachusetts Institute of Technology Cambridge, MA 02139
An important component of urban accessibility, particularly for wheelchair users and people with reduced mobility, is sidewalk compliance with measurable requirements. We test whether effective width, longitudinal slope, cross slope, and pavement condition can be assessed reliably from pedestrian-level imagery using vision-language models (VLMs). We present the first application of sampling-based conformal prediction (CP) for VLM-based accessibility assessment. We evaluate four VLMs on 514 sidewalk images from Seoul, South Korea, with field-measured ground truth. Conformal calibration attains the nominal 90% coverage for all models and attributes, but the calibrated regions differ in informativeness. Effective width yields the most informative estimates, with a mean interval half-width of about 1.0 m for the best model. Since every model overestimates width, asymmetric calibration shortens the intervals by up to 33% at unchanged coverage. Longitudinal slope is marginally informative, cross-slope intervals are too wide to resolve regulatory thresholds, and pavement-condition sets degenerate to all five grades (A-E) for three of the four models. Uncalibrated intervals from raw sampling dispersion cover only 17-47% of field-measured values at a nominal 90% level. Among the images with the most self-consistent responses, these intervals miss the field-measured value in up to 96% of cases. Response self-consistency is therefore not evidence of accuracy, and sampling dispersion cannot be interpreted as uncertainty until it has been calibrated against field-measured ground truth. No quantitative attribute reaches the precision required for general compliance assessment, but CP identifies from calibration data alone which attributes can support screening of segments far from the thresholds. We release the annotated pedestrian-level images and their corresponding field-measured attribute values.