Real-World Manipulation Tasks

We present a Learning from Demonstration (LfD) framework that achieves one-shot generalization in multi-stage, contact-rich manipulation tasks. Central to our approach is the utilization of environmental constraints as the inductive bias. By representing a demonstration as a sequence of behaviors that exploit environmental constraints, the robot separates task-general structure -- the constraint types and their transitions -- from instance-specific details such as exact demonstration trajectories, poses, and local geometries. Our four-stage pipeline builds a complete policy on this representation: the robot first abstracts a single demonstration into environmental-constraint primitives, then disambiguates them through self-guided exploration, next assimilates targeted human corrections that handle out-of-distribution variations, and finally recovers the abstracted-away details online through compliant interaction. Because the resulting policy follows constraints rather than mimics trajectories, it generalizes across object poses, local geometries, and unmodeled contact dynamics. We validate our approach on seven real-world multi-stage contact-rich manipulation tasks and achieve over 90% success. These extensive experimental results establish environmental constraints as fundamental building blocks for efficient generalization in learning from demonstration.

Legged manipulators extend robotic capabilities beyond static manipulation by integrating agile locomotion with versatile arm control. However, achieving precise manipulation while maintaining coordinated locomotion remains a major challenge. This work presents a hierarchical reinforcement learning framework for dynamic pick-and-place tasks using a quadruped equipped with a 6-DOF robotic arm. The framework incorporates an explicit mass estimation module enabling adaptive whole-body control for objects with varying weights. In simulation, the system achieves an 86.05% success rate with payloads up to 2.3 kg. The approach is further validated through real-world experiments across six representative scenarios with controlled variations in object physical properties (size and mass) and task heights. Specifically, within a wide vertical workspace ranging from ground level to 1.1~m-high tabletops, the system demonstrates an average success rate of 73.3% for payloads up to 1.3 kg, with an average execution time of 4.06 s. Unlike prior works that handle lightweight objects and execute pick-and-place motions with slow, piecewise motions, the proposed framework exploits concurrent locomotion and manipulation for dynamic, continuous execution. These results demonstrate the potential of quadrupedal mobile manipulators for adaptive, whole-body pick-and-place with heavier payloads and extended workspaces.

In this paper, we study the problem of manipulation skill acquisition for performing construction activities consisting of repetitive tasks (e.g., building a wall or installing ceiling tiles). Our approach involves setting up a simulated construction activity in a Virtual Reality (VR) environment, where the user can provide demonstrations of the object manipulation skills needed to perform the construction activity. We then exploit the screw geometry of motion to approximate the demonstrated motion as a sequence of constant screw motions. For performing the construction activity, we generate the sequence of manipulation task instances and then compute the joint space motion plan corresponding to each instance using Screw Linear Interpolation (ScLERP) and Resolved Motion Rate Control (RMRC). We evaluate our framework by executing two representative construction tasks: constructing brick walls and installing multiple ceiling tiles. Each task is performed using only a single demonstration, a pick-and-place action for the bricks, and a single ceiling tile installation. Our experiments with a 7-DoF robot in both simulation and hardware demonstrate that the approach generalizes robustly to arbitrarily long construction activities that involve repetitive motions and demand precision, even when provided with just one demonstration. For instance, we can construct walls of arbitrary layout and length by leveraging a single demonstration of placing one brick on top of another.

We introduce Forecast-aware Gaussian Splatting (Forecast-GS), a predictive 3D representation framework for language-conditioned robotic manipulation. While recent manipulation systems have made progress by grounding language instructions into robot affordances, value maps, or relational keypoint constraints, they usually reason over the current scene and do not explicitly model the task-completed state. This limitation is critical when success depends on satisfying spatial and semantic goals under partial observations, where the robot must evaluate whether a candidate action leads to a feasible task-consistent outcome. We validate Forecast-GS on real-world pick-and-place manipulation tasks, including Cutter-to-Box, Apple-to-Bowl, and Sponge-to-Tray. For each task, we conduct 25 real-world trials under varied initial object configurations using the same robot platform and sensing setup. Forecast-GS with automatic candidate selection achieves success rates of 21/25, 23/25, and 16/25 on the three tasks, respectively, outperforming the ReKep baseline, which achieves 15/25, 19/25, and 10/25. A diagnostic human-assisted setting further improves success rates to 23/25, 24/25, and 19/25, suggesting that candidate generation is effective while automatic ranking remains imperfect. These results suggest that explicitly forecasting task-completed 3D states enables more reliable action evaluation, while the gap between automatic and human-assisted selection indicates that robust final-state ranking remains an important challenge for fully autonomous manipulation. Overall, Forecast-GS provides an interpretable bridge between language understanding, 3D perception, and robotic manipulation planning.

Desktop organization remains challenging for service robots because of heterogeneous objects and diverse manipulation objectives, such as collection and stacking. In this article, a task-oriented framework is presented for organizing planar rigid and deformable objects on desks. A perception pipeline was developed that augments existing datasets with uncommon desktop items and makes geometry-based pose and keypoint estimation possible, along with the detection of environmental constraints, such as table edges. To handle diverse manipulation requirements, environment-assisted primitives are used, including contact-based grasping for small objects, edge-based push-grasping for planar rigid objects, and levering-based grasping for planar deformable objects. These primitives leverage environmental and interobject constraints to improve robustness. A task planner was designed to integrate these primitives into multiobject organization. Sufficient real-world experiments demonstrate the effectiveness and robustness of the proposed framework. This research provides practical manipulation primitives for planar rigid and deformable objects, highlighting the role of environmental and interobject constraints in complex multiobject manipulation tasks. Code and video are available online.

Real-world fine manipulation, particularly in bimanual manipulation, typically requires low-latency control and stable visual localization, while collecting large-scale data is costly and limited demonstrations may lead to localization drift. Existing approaches make different trade-offs: action-chunking policies such as ACT enable low-latency execution and data efficiency but rely on dense visual features without explicit spatial consistency, generative methods such as Diffusion Policy improve expressiveness but can incur iterative sampling latency, vision-language-action and voxel-based methods enhance generalization and geometric grounding but require higher computational cost and system complexity. We introduce a multistage spatial attention module that extracts stable 2D attention points and jointly predicts future attention sequences with a temporal alignment loss. Built upon ACT with a pretrained ResNet visual prior, a multistage attention module extracts task-relevant 2D attention points as a local spatial modality for action prediction. To maintain consistent object tracking, we introduce a self-supervised objective that aligns predicted attention sequences with visual features from future frames, suppressing drift without keypoint annotations and improving stability of the vision-to-action mapping under limited data. Experiments on simulated and real-world fine manipulation tasks, conducted on the ALOHA bimanual platform, evaluate task success, attention drift, inference latency, and robustness to visual disturbances. Results indicate improvements in localization stability and task performance while maintaining low-latency inference under the tested conditions.

Robots operating in open, unstructured real-world environments must rely on onboard visual perception while autonomously moving across different locations. Continuous changes in onboard camera viewpoints cause significant visual scale variations in target objects, affecting vision-based motion generation. In this work, we present a stereo multistage spatial attention-based deep predictive learning method for real-time mobile manipulation. The proposed methods extracts task-relevant spatial attention points from stereo images and integrates them with robot states through a hierarchical recurrent architecture for closed-loop action prediction. We evaluate the system on four real-world mobile manipulation tasks using a mobile manipulator, including rigid placement, articulated object manipulation, and deformable object interaction. Experiments under randomized initial positions and visual disturbance conditions demonstrate improved robustness and task success rates compared to representative imitation learning and vision-language-action baselines under identical control settings. The results indicate that structured stereo spatial attention combined with predictive temporal modeling provides an effective solution within the evaluated mobile manipulation scenarios.

Robotic systems that interact with the physical world must reason about kinematic and dynamic constraints imposed by their own embodiment, their environment, and the task at hand. We introduce KinDER, a benchmark for Kinematic and Dynamic Embodied Reasoning that targets physical reasoning challenges arising in robot learning and planning. KinDER comprises 25 procedurally generated environments, a Gymnasium-compatible Python library with parameterized skills and demonstrations, and a standardized evaluation suite with 13 implemented baselines spanning task and motion planning, imitation learning, reinforcement learning, and foundation-model-based approaches. The environments are designed to isolate five core physical reasoning challenges: basic spatial relations, nonprehensile multi-object manipulation, tool use, combinatorial geometric constraints, and dynamic constraints, disentangled from perception, language understanding, and application-specific complexity. Empirical evaluation shows that existing methods struggle to solve many of the environments, indicating substantial gaps in current approaches to physical reasoning. We additionally include real-to-sim-to-real experiments on a mobile manipulator to assess the correspondence between simulation and real-world physical interaction. KinDER is fully open-sourced and intended to enable systematic comparison across diverse paradigms for advancing physical reasoning in robotics. Website and code: https://prpl-group.com/kinder-site/

Learning robot manipulation from human videos is appealing due to the scale and diversity of human demonstrations, but transferring such demonstrations to executable robot behavior remains challenging. Prior work either relies on robot data for downstream adaptation or learns affordance representations that remain at the perception level and do not directly support real-world execution. We present BridgeACT, an affordance-driven framework that learns robotic manipulation directly from human videos without requiring any robot demonstration data. Our key idea is to model affordance as an embodiment-agnostic intermediate representation that bridges human demonstrations and robot actions. BridgeACT decomposes manipulation into two complementary problems: where to grasp and how to move. To this end, BridgeACT first grounds task-relevant affordance regions in the current scene, and then predicts task-conditioned 3D motion affordances from human demonstrations. The resulting affordances are mapped to robot actions through a grasping module and a lightweight closed-loop motion controller, enabling direct deployment on real robots. In addition, we represent complex manipulation tasks as compositions of affordance operations, which allows a unified treatment of diverse tasks and object-to-object interactions. Experiments on real-world manipulation tasks show that BridgeACT outperforms prior baselines and generalizes to unseen objects, scenes, and viewpoints.

Unknown payloads can strongly affect compliant robotic manipulation, especially when the payload center of mass is not aligned with the tool center point. In this case, the payload generates an offset wrench at the robot wrist. During motion, this wrench is not only related to payload weight, but also to payload inertia. If it is not modeled, the compliant controller can interpret it as an external interaction wrench, which causes unintended compliant motion, larger tracking error, and reduced transport accuracy. This paper presents a wrench-aware admittance control framework for unknown-payload pick-and-place using a UR5e robot. The method uses force-torque measurements in two different roles. First, a three-axis translational excitation term is used to reduce payload-induced force effects during transport without making the robot excessively stiff. Second, after grasping, the controller first estimates payload mass for transport compensation and then estimates the payload CoM offset relative to the TCP using wrist force-torque measurements collected during the subsequent translational motion. This helps improve object placement and stacking behavior. Experimental results show improved transport and placement performance compared with uncorrected placement while preserving compliant motion.

Deploying a humanoid robot to manipulate a new object has traditionally required one to two days of effort: data collection, manual annotation, 3D model acquisition, and model training. This paper presents an end-to-end rapid deployment pipeline that integrates three foundation-model components to shorten the onboarding cycle for a new object to approximately 30 minutes: (i) Roboflow-based automatic annotation to assist in training a YOLOv8 object detector; (ii) 3D reconstruction based on Meta SAM 3D, which eliminates the need for a dedicated laser scanner; and (iii) zero-shot 6-DoF pose tracking based on FoundationPose, using the SAM3D-generated mesh directly as the template. The estimated pose drives a Unity-based inverse kinematics planner, whose joint commands are streamed via UDP to a UnitreeG1 humanoid and executed through the Unitree SDK. We demonstrate detection accuracy of mAP@0.5 = 0.995, pose tracking precision of $σ< 1.05$ mm, and successful grasping on a real robot at five positions within the workspace. We further verify the generality of the pipeline on an automobile-window glue-application task. The results show that combining foundation models for perception with everyday imaging devices (e.g., smartphones) can substantially lower the deployment barrier for humanoid manipulation tasks.

Collecting embodied interaction data at scale remains costly and difficult due to the limited accessibility of conventional interfaces. We present a gamified data collection framework based on Unity that combines procedural scene generation, VR-based humanoid robot control, automatic task evaluation, and trajectory logging. A trash pick-and-place task prototype is developed to validate the full workflow.Experimental results indicate that the collected demonstrations exhibit broad coverage of the state-action space, and that increasing task difficulty leads to higher motion intensity as well as more extensive exploration of the arm's workspace. The proposed framework demonstrates that game-oriented virtual environments can serve as an effective and extensible solution for embodied data collection.

Learning a generalist control policy for robotic manipulation typically relies on large-scale datasets. Given the high cost of real-world data collection, a practical alternative is to generate synthetic data through simulation. However, the resulting synthetic data often exhibits a significant gap from real-world distributions. While many prior studies have proposed algorithms to bridge the Sim-to-Real discrepancy, there remains a lack of principled research that grounds these methods in real-world manipulation tasks, particularly their performance on generalist policies such as Vision-Language-Action (VLA) models. In this study, we empirically examine the primary determinants of Sim-to-Real generalization across four dimensions: multi-level domain randomization, photorealistic rendering, physics-realistic modeling, and reinforcement learning updates. To support this study, we design a comprehensive evaluation protocol to quantify the real-world performance of manipulation tasks. The protocol accounts for key variations in background, lighting, distractors, object types, and spatial features. Through experiments involving over 10k real-world trials, we derive critical insights into Sim-to-Real transfer. To inform and advance future studies, we release both the robotic platforms and the evaluation protocol for public access to facilitate independent verification, thereby establishing a realistic and standardized benchmark for robotic manipulation policies.

Intelligent agents must reason over both continuous dynamics and discrete representations to generate effective plans in complex environments. Previous studies have shown that symbolic abstractions can emerge from neural effect predictors trained with a robot's unsupervised exploration. However, these methods rely on deterministic symbolic domains, lack mechanisms to verify the generated symbolic plans, and operate only at the abstract level, often failing to capture the continuous dynamics of the environment. To overcome these limitations, we propose a bilevel neuro-symbolic framework in which learned probabilistic symbolic rules generate candidate plans rapidly at the high level, and learned continuous effect models verify these plans and perform forward search when necessary at the low level. Our experiments on multi-object manipulation tasks demonstrate that the proposed bilevel method outperforms symbolic-only approaches, reliably identifying failing plans through verification, and achieves planning performance statistically comparable to continuous forward search while resolving most problems via efficient symbolic reasoning.

Precise object placement remains underexplored in aerial manipulation, where most systems rely on predefined target coordinates and focus primarily on grasping and control. Specifying exact placement poses, however, is cumbersome in real-world settings, where users naturally communicate goals through language. In this work, we present AeroPlace-Flow, a training-free framework for language-grounded aerial object placement that unifies visual foresight with explicit 3D geometric reasoning and object flow. Given RGB-D observations of the object and the placement scene, along with a natural language instruction, AeroPlace-Flow first synthesizes a task-complete goal image using image editing models. The imagined configuration is then grounded into metric 3D space through depth alignment and object-centric reasoning, enabling the inference of a collision-aware object flow that transports the grasped object to a language and contact-consistent placement configuration. The resulting motion is executed via standard trajectory tracking for an aerial manipulator. AeroPlace-Flow produces executable placement targets without requiring predefined poses or task-specific training. We validate our approach through extensive simulation and real-world experiments, demonstrating reliable language-conditioned placement across diverse aerial scenarios with an average success rate of 75% on hardware.

Mobile manipulation is a fundamental capability for general-purpose robotic agents, requiring both coordinated control of the mobile base and manipulator and robust perception under dynamically changing viewpoints. However, existing approaches face two key challenges: strong coupling between base and arm actions complicates control optimization, and perceptual attention is often poorly allocated as viewpoints shift during mobile manipulation. We propose InCoM, an intent-driven perception and structured coordination framework for mobile manipulation. InCoM infers latent motion intent to dynamically reweight multi-scale perceptual features, enabling stage-adaptive allocation of perceptual attention. To support robust cross-modal perception, InCoM further incorporates a geometric-semantic structured alignment mechanism that enhances multimodal correspondence. On the control side, we design a decoupled coordinated flow matching action decoder that explicitly models coordinated base-arm action generation, alleviating optimization difficulties caused by control coupling. Experimental results demonstrate that InCoM significantly outperforms state-of-the-art methods, achieving success rate gains of 28.2%, 26.1%, and 23.6% across three ManiSkill-HAB scenarios without privileged information. Furthermore, its effectiveness is consistently validated in real-world mobile manipulation tasks, where InCoM maintains a superior success rate over existing baselines.

Training non-prehensile manipulation policies in contact-rich settings is a core challenge in robotics. While Reinforcement Learning (RL) has demonstrated its strength in such settings, it may struggle to sufficiently explore and discover complex manipulation strategies. To address this, we combine two basic ideas: First, designing appropriate reset strategies (the start state distribution of episodes) has shown promise in improving RL exploration and effectiveness. Second, while model-based approaches to finding trajectories through manipulation are hard, recent work showed that model-based approaches to sampling states on constrained manifolds can be highly efficient. Based on these observations, we propose a novel state sampler that boosts the performance of goal-conditioned RL in complex contact-rich manipulation tasks. Our sampler explicitly takes into account the structure of contact in order to provide a rich covering of diverse contact modes. By combining constrained sampling resets with projected interpolation and curriculum learning, our novel approach outperforms RL without constrained sampling and alternative reset methods, and effectively trains universal, non-prehensile, and dynamic manipulation policies in contact-rich settings. See https://www.user.tu-berlin.de/mtoussai/26-CSRL/ for supplementary material.

The generalization capabilities of robotic manipulation policies are heavily influenced by the choice of visual representations. Existing approaches typically rely on representations extracted from pre-trained encoders, using two dominant types of features: global features, which summarize an entire image via a single pooled vector, and dense features, which preserve a patch-wise embedding from the final encoder layer. While widely used, both feature types mix task-relevant and irrelevant information, leading to poor generalization under distribution shifts, such as changes in lighting, textures, or the presence of distractors. In this work, we explore an intermediate structured alternative: Slot-Based Object-Centric Representations (SBOCR), which group dense features into a finite set of object-like entities. This representation permits to naturally reduce the noise provided to the robotic manipulation policy while keeping enough information to efficiently perform the task. We benchmark a range of global and dense representations against intermediate slot-based representations, across a suite of simulated and real-world manipulation tasks ranging from simple to complex. We evaluate their generalization under diverse visual conditions, including changes in lighting, texture, and the presence of distractors. Our findings reveal that SBOCR-based policies outperform dense and global representation-based policies in generalization settings, even without task-specific pretraining. These insights suggest that SBOCR is a promising direction for designing visual systems that generalize effectively in dynamic, real-world robotic environments.

Relational object rearrangement (ROR) tasks (e.g., insert flower to vase) require a robot to manipulate objects with precise semantic and geometric reasoning. Existing approaches either rely on pre-collected demonstrations that struggle to capture complex geometric constraints or generate goal-state observations to capture semantic and geometric knowledge, but fail to explicitly couple object transformation with action prediction, resulting in errors due to generative noise. To address these limitations, we propose Imagine2Act, a 3D imitation-learning framework that incorporates semantic and geometric constraints of objects into policy learning to tackle high-precision manipulation tasks. We first generate imagined goal images conditioned on language instructions and reconstruct corresponding 3D point clouds to provide robust semantic and geometric priors. These imagined goal point clouds serve as additional inputs to the policy model, while an object-action consistency strategy with soft pose supervision explicitly aligns predicted end-effector motion with generated object transformation. This design enables Imagine2Act to reason about semantic and geometric relationships between objects and predict accurate actions across diverse tasks. Experiments in both simulation and the real world demonstrate that Imagine2Act outperforms previous state-of-the-art policies. More visualizations can be found at https://sites.google.com/view/imagine2act.

Imitation learning for generalizable performance often requires a large volume of demonstration data, making the process significantly costly. One promising strategy to address this challenge is to leverage the cognitive skills of human demonstrators with strong generalization capability, particularly by revealing the underlying task demands reflected in their gaze behavior. However, imitation learning typically involves humans collecting data using demonstration devices that emulate a robot's embodiment and visual condition. This raises the question of how such devices influence gaze behavior. We propose an experimental framework that systematically analyzes human demonstrators' gaze behavior across a spectrum of robot-emulating demonstration devices. Our experimental results show that certain device properties shift gaze from task-goal cues (e.g., objects) toward control-monitoring cues (e.g., the end-effector). Furthermore, these shifts directly affect the performance of typical gaze-based imitation learning models, sometimes degrading it below non-gaze baselines.