Convolutional Neural Networks

Large-kernel Convolutional Neural Networks (CNNs) deliver remarkable performance in vision tasks by significantly expanding receptive fields, yet their quadratic parameter growth critically impedes storage-efficient edge deployment. While existing efficient architectures adopt parameter-efficient depthwise separable convolution backbones that leverage techniques like low-rank approximation and weight sharing to compress depthwise convolutions, we identify a critical oversight: pointwise convolutions dominate parameter volume (>87% in models like RepLKNet-31B) and constitute the primary deployment bottleneck on resource-constrained edge devices. This results in prohibitive storage costs and severe memory-loading constraints on resource-limited devices (e.g., smartphones with 4-12 GB Random Access Memory (RAM)). To overcome this, we propose Channel Group-Shared (CGS) low-rank approximation, a novel Singular Value Decomposition (SVD)-based parameter-sharing strategy. CGS constructs a structured low-rank paradigm isomorphic to SVD decomposition, comprising shared (high-parameter-cost) down/up-projection matrices across channel groups within a layer and channel-group-specific (low-parameter-cost) scalable diagonal matrices. This group-sharing design achieves significant parameter reduction. Extensive experiments demonstrate that large-kernel CNNs (RepLKNet, ConvNeXt, SLaK) enhanced with CGS strike an empirically favorable balance between competitive performance and substantially reduced storage costs. Crucially, by alleviating storage constraints, reducing memory bandwidth pressure during loading, and minimizing model loading latency, CGS enables the feasible deployment of pre-trained large-kernel CNN models on edge devices, thereby bridging the gap between high-performance vision models and practical edge deployment.

Finger vein verification is a promising biometric modality for secure authentication because vascular patterns are internal, difficult to observe externally, and relatively resistant to presentation attacks. However, reliable verification remains challenging in open-set settings, where test identities are unseen during training and non-enrolled probes must be rejected at inference. This paper presents OpenVeinNet, a finger vein verification framework designed for cross-dataset and open-set evaluation. The proposed model combines Dynamic Snake Convolution with graph-based feature modelling. Dynamic Snake Convolution extracts local curvilinear and tubular vein structures using adaptive sampling, while the graph convolutional backbone models long-range topological relationships between vein regions. To improve the discriminative quality of the embedding space, we introduce a Centroid Angular Hybrid Loss, which jointly encourages intra-class compactness and inter-class angular separation for cosinesimilaritybased verification. Experiments are conducted on five public finger vein datasets: FV-300, MMCBNU, FV-USM, PolyU, and VERA. The method is evaluated using leaveonedatasetout training under both enrolmentbased unknownrejection and fullsubject verification protocols, and is compared with handcrafted and recent deep learning-based baselines. The results show that OpenVeinNet achieves strong cross-dataset generalisation, consistently low equal error rates, and competitive true accept rates at fixed false accept rate operating points. Ablation studies further confirm the individual and combined contributions of adaptive tubular feature extraction, graph-based relational modelling, and the proposed loss function. These findings indicate that explicitly modelling local vein geometry, global vascular relationships, and angularly compact embeddings is effective for openset finger vein verification.

Automated seizure detection from scalp electroencephalography (EEG) is difficult because seizure morphology varies among patients and seizure samples are substantially outnumbered by non-seizure samples. This paper presents an attention-enhanced dual-branch network that jointly learns time--frequency and temporal representations from the same EEG segment. A continuous wavelet transform converts each segment into a scalogram processed by an ImageNet-pretrained ConvNeXt-Tiny backbone and squeeze-and-excitation attention. In parallel, a bidirectional long short-term memory network followed by multi-head self-attention models the raw signal. The two feature vectors are concatenated and classified by a weighted multilayer perceptron. Experiments use 14 subjects from the CHB-MIT scalp EEG database with subject-wise partitioning performed before overlapping segmentation. The model obtains $97.88\%$ accuracy and $97.51\%$ F1-score over ten across-subject splits, and $97.51\%$ accuracy, $96.59\%$ F1-score, and $98.02\%$ area under the ROC curve under 14-fold leave-one-subject-out validation. Removing temporal attention causes the largest ablation loss. The model requires 28.26 million parameters and 4.56 GFLOPs, with a measured network-only inference latency of 4.64 ms per segment.

Data-driven methods are widely used in landslide susceptibility mapping (LSM) because they can effectively model the complex relationships between landslides and geo-environmental conditions. Existing data-driven approaches generally follow two types of data representations. Pixel-based models focus solely on the geo-environmental characteristics of a specific landslide but neglect the influence of its surrounding environment. Patch-based models incorporate surrounding spatial context but may include pixels with weak or no spatial relevance to the target landslide location. To address this limitation, this study proposes a Local-Geo and Spatial Context Fusion (LGSCF) strategy, which synergises the geo-environmental characteristics of landslide points with their corresponding spatial context through a feature-wise modulation mechanism. We tested the LGSCF strategy by integrating it into several representative convolutional neural network (CNN) architectures, creating nine different LGSCF-based models. The primary study area covers approximately 2644 km2 across Jenai and Sinyi Townships in Nantou County, Taiwan, and the dataset comprises 5332 landslide samples and an equal number of non-landslide samples. The results show that LGSCF-based models consistently outperform their corresponding baselines, achieving F1-scores up to 87.09% and AUC values up to 0.9472. Furthermore, the susceptibility maps produced by LGSCF-based models show that known landslides are more accurately concentrated in "very high" susceptibility zones with fewer misclassifications. These findings demonstrate that our fusion strategy can significantly improve the accuracy of landslide susceptibility mapping.

Accurate brain tumor segmentation from magnetic resonance imaging (MRI) is essential for diagnosis, treatment planning, surgical guidance, and disease monitoring. However, developing automated segmentation models that generalize across diverse tumor characteristics, imaging protocols, acquisition sites, and patient populations remains challenging. Variations in tumor morphology and imaging distributions can substantially degrade performance outside the training domain. Consequently, improving the robustness and generalization of deep learning-based segmentation models has become a key objective in medical image analysis. To improve segmentation robustness, we propose Multi-Stage Dynamic Prompt nnU-Net, a prompt-conditioned extension of nnU-Net. Three independent dynamic prompt modules are inserted into the deepest encoder stages. Each module contains a learnable bank of ten 256-dimensional prompt vectors and uses globally pooled encoder features to generate image-specific prompt representations. These representations are projected into feature-wise scaling $(γ)$ and shifting $(β)$ parameters that modulate encoder feature maps through Feature-wise Linear Modulation (FiLM), enabling adaptive feature conditioning at multiple semantic levels. Evaluation on the BraTS GOAT validation dataset demonstrated that the proposed Multi-Stage Dynamic Prompt nnU-Net outperformed the baseline nnU Net across the majority of evaluated metrics and tumor subregions. The proposed model achieved average lesion-wise Dice scores of 76.16% (ET), 80.04% (TC), and 86.42% (WT), compared with 74.38%, 78.14% and 84.01% for the baseline model. The results demonstrate that multi-stage dynamic prompt conditioning improves segmentation accuracy and boundary delineation for brain tumor segmentation.

Runtime thermal management of high-performance chips depends on fast and accurate full-chip thermal maps. Conventional simulators typically estimate power traces from performance metrics first, which adds overhead. This work proposes TherMapNet, an attention-guided thermal simulator that predicts full-chip thermal maps directly from performance metrics. A Transformer encoder captures temporal evolution by treating the time series of each metric as a token, improving modeling of dynamic workloads. A CNN then extracts fine-grained spatial features. For the CNN, a dual-branch channel-spatial attention convolution module (DACM) and a triplet loss are used to improve spatial learning and reconstruction accuracy. TherMapNet is applied to a multi-core CPU (AMD Ryzen 7 4800U) and a many-core GPU (NVIDIA GeForce RTX 4060). Experiments show that it outperforms prior thermal simulators, with RMSE below 0.26 C and inference under 2.4 ms on an NVIDIA GeForce RTX 3090 GPU. These results indicate that TherMapNet can support high-quality runtime thermal management of modern multi-core chips.

Convolution is a principal computational bottleneck in deep neural networks, and its efficiency depends on tight integration between algorithms and GPU hardware. Existing GPU convolution methods suffer from large memory overhead, poor cache utilization, limited effectiveness across kernel sizes, or numerical instability. This work extends the im2win paradigm -- a universal, memory-efficient convolution method with contiguous memory access for all kernel sizes -- to run efficiently in full precision on CUDA cores and half precision on tensor cores. By introducing new kernel designs and optimizations such as zig-zag memory access and asynchronous data movement, im2win efficiently exploits hardware-accelerated half-precision matrix multiply-accumulate operations. Across twelve CNN benchmarks, im2win achieves up to 2.8x higher TFLOPS than its CUDA core implementation, 1.4x higher than cuDNN, and 6.4x higher than GEMM-based convolution with cuBLAS, while using as little as 53% and 35% of their memory, respectively. These results establish im2win as a unified, high-performance convolution framework for modern GPU architectures.

The same fruit appears in a bunch, unpicked, peeled, bagged in plastic, or sliced on a dish, so automated fruit classification in the wild (AFCW) must absorb wide intra- class and narrow inter-class variability in shape, size, colour and texture. Convolutional networks route information through pooling, which discards the pose and location of the region of interest and therefore generalises poorly across these presentations. We propose FruitCapsNet, a capsule network whose Fruit Capsules replace the standard convolutional front end with dilated convolutions: the receptive field grows exponentially at constant parameter cost, so each capsule encodes multi-scale context before dynamic routing resolves part whole spatial agreement. Hyper-parameters, including the dilation factor, are selected by Bayesian optimisation rather than grid search. On three public datasets (SMP, FruitsGB, Fruits-360) and a new 19-class, 10,639-image in-the-wild dataset (PD-19), FruitCapsNet exceeds ten fine-tuned transfer-learning backbones at one-third the depth, with the largest margin (+2.7% over the nearest competitor) on the hardest set. Grad-CAM saliency propagated from the DigitCaps layer shows that the improvement comes from attributing decisions to whole-fruit regions rather than to object edges, giving post-hoc evidence that the gain is not a dataset artefact.

Conventional convolutional kernels are typically defined on fixed discrete grids, limiting their ability to accommodate heterogeneous local structures. Existing adaptive operators improve flexibility but often couple geometric scale variation with content-dependent filtering, while incurring high computational cost from per-location kernel generation. To decouple geometric scale adaptation from content-dependent filtering while avoiding expensive per-location kernel generation, we propose Continuous Relative-scale KAN (Core-KAN), a relative-scale-conditioned continuous convolution operator. Core-KAN maps input features into a compact latent basis space and uses a lightweight scale controller to predict local scales relative to an exponential moving average reference. A KAN-based generator represents depth-wise kernel bases as continuous coordinate functions, allowing the operator to synthesize spatial filters at arbitrary resolutions rather than being confined to a fixed lattice. Instead of synthesizing independent kernels at every location, it constructs a compact bank of scale-conditioned kernel responses and interpolates them according to the predicted local scale map. An independent mixing controller further combines the interpolated basis responses based on local content, explicitly decoupling geometric scale adaptation from content-dependent filtering. Together with lightweight pointwise projections, this design forms a low-rank dynamic convolution that scales efficiently with kernel size and integrates readily into hierarchical vision backbones. Experiments across three representative vision tasks show Core-KAN consistently outperforms strong convolutional and dynamic-kernel baselines with only marginal parameter and computational overhead, offering an efficient, general framework for continuous, scale-adaptive convolution.

Deep Learning models can include billions of parameters or more, making it difficult to explain their internal transformations and outputs. However, explainability is increasing in importance due to the use of AI in crucial applications. This paper focuses on the interpretability of convolutional neural networks (CNNs). Building on the popular gradient based method LayerCAM for extracting internal features in CNNs, we propose an improved method named HiRA-CAM, and show that it outperforms both LayerCAM and Grad-CAM on creating useful saliency maps for object classification. The main feature of HiRA-CAM is its adaptive use of activation maps from all the layers of the CNN to arrive at a more focused saliency map.

A convolutional sequence labeler's receptive field is routinely treated as the extent of the model's usable context: it sets dilation schedules, bounds streaming horizons, and underwrites locality claims. However, we show that this can be false: when a normalization layer computes statistics from the current input along the sequence at inference, those statistics open a sequence-spanning path that bypasses the convolutional receptive field to provide global context. We derive this from the layer's Jacobian (the criterion needs no experiment), and what the path carries has a closed form. On a synthetic labeling process with computable optima, the global summary that a sequence-spanning normalization encodes already supplies almost all of what a larger receptive field would buy where labels come in long runs: a network reaching 9 positions comes within 0.009 of the whole-sequence optimum, against a near-chance bound for its reach. Closing the path, by taking the same statistics per position, multiplies what enlarging the receptive field is worth by up to an order of magnitude on simulated genomes at every difficulty level tested and on real 1000 Genomes haplotypes. The same path also confounds attribution: ablating a trained network's receptive-field-enlarging blocks severs part of the path, overstating their contribution 8.3-16.1-fold relative to retraining from scratch. The substitution of normalization for receptive field fades as labels switch more often. Where labels run long, neither the receptive-field justification nor the ablation is wrong about its numbers, but both credit the wrong component.

Wavelet convolution layers have recently emerged as an efficient mechanism for enlarging receptive fields through multiresolution analysis, but prior work has fixed the wavelet basis to Haar or Daubechies at a chosen decomposition depth, leaving open whether a different basis can shift the underlying efficiency frontier. We identify and characterize a previously unexplored trade-off in this setting: bases with stronger approximation properties (longer filters) can reduce the decomposition depth required for competitive accuracy, yielding a net reduction in parameters and FLOPs despite higher perlevel transform cost. We formalize this as an F-vs.-L tradeoff (filter length vs. decomposition levels) and study it systematically across Haar, Daubechies, Symlets, and Coiflets under controlled architectures and budgets. On image classification (CIFAR-10, ImageNet-1K) and semantic segmentation (Cityscapes), Coiflet-based wavelet convolutions match Haar at deeper levels with approximately 32% fewer additional parameters and 33% fewer additional FLOPs, providing a concrete and actionable design choice for practitioners building wavelet-based architectures.

Hyperspectral reflectance spectroscopy enables non-destructive estimation of plant functional traits, yet current deep learning approaches process spectra as one-dimensional sequences, which limits how they capture long-range inter-band dependencies. We asked whether transforming 1D spectra into 2D image representations improves multi-trait prediction with convolutional neural networks (CNN). We compared nine transformations using EfficientNet-B0 on the GreenHyperSpectra dataset (7,897 labeled spectra, eight traits, 400-2450 nm), benchmarked against published 1D CNN results on the same split. Trained from scratch, the simplest transformation, a direct Reshape of the spectrum into a 2D grid, performed best ($R^2 = 0.684 \pm 0.001$) and improved on the state-of-the-art 1D baseline ($R^2 = 0.587$, $+0.097$). We then pretrained a 2D masked autoencoder (MAE-2D) on 139,000 unlabeled spectral images. Linear probing, which freezes the encoder and trains only a multilayer perceptron head, reached $R^2 = 0.646$ and exceeded every 1D self-supervised counterpart, including the fine-tuned MAE-1D ($R^2 = 0.641$). Under cross-dataset evaluation all models lost most of their accuracy and none beat the 1D baseline significantly. To identify which wavelengths drive each prediction, we applied Integrated Gradients and Grad-CAM and unfolded band importance back to the spectral axis. Protein ($r = 0.45$) and leaf water ($r = 0.33$) agreed with sensitivities simulated by the PROSAIL radiative-transfer model, while carotenoids ($r = 0.06$) and leaf area index ($r = -0.11$) did not, showing that the model reads established leaf chemistry for traits with sharp absorption features. The representational advantage of 2D spectral images, rather than architectural complexity or ImageNet pretraining, drives the gain over 1D approaches.

Remote sensing object detection (RSOD) requires compact backbones capable of preserving weak geometric cues under extreme scale variation and background clutter. Fixed structural operators provide complementary contour and frequency responses without introducing learnable operator coefficients. However, directly injecting these responses can amplify content-irrelevant textures, while applying a uniform operator design across the hierarchy may be poorly matched to stage-specific representation requirements. We propose the Structural Prior Enhanced Attention Network (SPEANet), a parameter-efficient RSOD backbone that integrates fixed operators through stage-specific prior extraction and context-conditioned response modulation. SPEANet assigns smoothed contour and multi-order directional modeling to shallow, high-resolution features, while employing a compact approximation-detail interaction mechanism in deeper stages. Learned spatial gates regulate the resulting prior responses before residual fusion. Experiments on five benchmarks, together with evaluations across seven detection frameworks on DOTA-v1.0, achieve a favorable accuracy-parameter trade-off. With Oriented R-CNN, SPEANet achieves 78.55% mAP on DOTA-v1.0, 72.24% mAP on DOTA-v1.5, and 67.30% mAP on DIOR-R using 23.0M total parameters, including a 5.97M-parameter backbone.

Fake/synthetic images are increasingly prevalent, but it remains unclear whether Convolutional Neural Networks (CNNs) process real and fake images in the same internal manner. This work examines the hypothesis that CNNs represent real and fake images differently, such that fake images induce different hidden-layer activation patterns even when semantic content is preserved. The hypothesis is evaluated in scene recognition settings using trained CNN models. Dense-layer activations are extracted, and neurosymbolic methods assign semantic labels to selected neurons. For each real test image, corresponding fake images are generated with similar semantic content using object-label-guided text-to-image and image-to-image generation based on Stable Diffusion variants. Paired real-fake activation patterns are then compared statistically. Additional experiments with another dataset, CNN architecture, generative model, and JPEG/blur degradation analysis assess robustness. Results suggest that fake images evoke different hidden-neuron activations, and these differences are not explained only by simple image degradation. Overall, the findings indicate that real and fake images differ in CNN hidden-layer activation behavior at least in some settings, which opens the door for follow-up work on making use of this different behavior to improve fake image detection.

Data-driven inverse design enables efficient generation of nanophotonic structures with prescribed optical responses, but spectrum-to-geometry mapping remains challenging due to non-uniqueness and fine geometric features. This work presents a two-stage deformable-convolutional framework for reconstructing metal--insulator--metal resonator geometries from 80-dimensional absorption spectra. The spectrum is projected to a $150\times4\times4$ latent representation and decoded into a $64\times64$ resonator mask. Training combines supervised reconstruction with least-squares adversarial refinement initialized from the best supervised checkpoint. A three-run ablation compares deformable convolution with plain convolution, involution, Dynamic Conv, and ODConv under the same architecture. The proposed model achieves $20.79\pm0.31$dB PSNR and $0.8501\pm0.0082$ SSIM, improving over plain convolution by 2.16dB and 0.0831, respectively. It further achieves Dice $0.9623\pm0.0027$, IoU $0.9342\pm0.0038$, and boundary F-score $0.9550\pm0.0027$. Spectral consistency evaluated using a frozen forward surrogate yields RMSE $0.0805\pm0.0013$ and $R^2=0.7923\pm0.0065$. Learned offsets show stronger adaptive sampling at coarse and intermediate decoder stages. Overall, deformable sampling with supervised initialization and adversarial refinement improves spectrum-conditioned geometry reconstruction.

Alzheimer's disease is a leading cause of death with no cure. Therefore, early detection is critical to slow progression and preserve quality of life. Diagnosis relies on medical history, cognitive tests, physical exams, and MRI brain scans, making deep learning suitable for Alzheimer's classification. This work proposes a benchmark that evaluates ten different convolutional neural network (CNN) architectures (including ResNet, DenseNet, MobileNet, EfficientNet, and VGG family models) under the same held-out test split protocol. A two-stage transfer learning and full fine-tuning pipeline is introduced to perform training using a class-balanced subset (3,900 images) derived from the OASIS medical imaging dataset, comprising 86,437 single-view MRI brain scans labeled into four classifications of Alzheimer's disease: Non-Demented, Very Mild Dementia, Mild Dementia, and Moderate Dementia. The best results were achieved by VGG16, with a 0.9637 validation accuracy and a 0.9533 test accuracy score. A key finding documented in this work is the difficulty of classifying the transition from Non-Demented to Very Mild Demented stages, observed consistently across all ten architectures.

Wavelet convolution (WTConv) has emerged as an increasingly popular drop-in replacement for standard convolutions, expanding a network's receptive field exponentially with the number of decomposition levels while keeping the parameter count linear. However, its reference implementation is severely memory-bound due to excessive data movement through high-bandwidth memory (HBM). We develop an I/O model of WTConv to characterize this bottleneck and use it to guide three algebraic reformulations: (1) recomputing the inexpensive Haar analysis butterfly on chip, (2) collapsing the multi-level synthesis cascade into a single closed-form pass indexed by output-coordinate bits, and (3) folding learned per-channel scales into the convolution weights. Together, these reformulations enable an I/O-aware fused implementation that substantially reduces HBM traffic. We evaluate the WTConvNeXt configuration across decomposition levels and a broad range of tensor shapes. Despite performing comparable arithmetic, the reference WTConv is substantially slower than the depthwise convolution it replaces. Our reformulation reduces modeled HBM traffic by approximately $2.55\times$, yielding up to a $4.35\times$ training speedup over the reference while roughly halving peak memory usage. Thus, our reformulation preserves the benefits of WTConv while substantially reducing its execution time and memory footprint, removing the systems overhead that previously limited its practical efficiency.

This demo presents real-time AI-based uplink channel-estimation inference using data collected from a hardware-in-the-loop 5G platform. The data-collection setup integrates commercial RF signal generation, programmable channel emulation, an O-RAN Radio Unit, DU emulation, and a lightweight phase-aware convolutional neural network (CNN) that estimates the channel response directly from received DMRS signals. Unlike simulation-only evaluations, the hardware-derived dataset exposes the estimator to practical RF and system-level impairments, including calibration mismatches, synchronization imperfections, quantization effects, phase noise, and implementation-specific nonlinearities. During the demo, attendees will observe real-time CNN inference and channel reconstruction using captured hardware-generated DMRS observations and compare the proposed CNN against Least Squares (LS) and frequency-domain LMMSE baselines. The objective is to showcase a practical AI-native physical-layer inference pipeline that combines hardware-derived 5G data with real-time neural channel estimation for future 5G-Advanced and 6G systems.

Continuous cuffless blood pressure (BP) monitoring using photoplethysmography (PPG) offers a promising solution for personalized healthcare. However, existing methods have two major limitations. Handcrafted feature-based approaches rely on precise fiducial point detection and are limited to short-term analysis, while deep learning models, despite their accuracy, often operate as black boxes with limited physiological interpretability. To address these challenges, we propose a physiology-guided hybrid framework for personalized BP estimation that couples a convolutional neural network (CNN) branch capturing global and local waveform dynamics with a morphology-prior branch that explicitly encodes person-specific vascular characteristics. By embedding a morphology-based feature set that explicitly encodes individual vascular characteristics, the proposed framework enhances personalization and reduces dependence on large-scale training datasets. Evaluated on a subset of the MIMIC-III database under a subject-specific (personalized) testing protocol, the proposed personalized physiology-guided hybrid approach achieved mean absolute errors (MAEs) of 3.77 mmHg for systolic BP and 2.36 mmHg for diastolic BP, corresponding to relative improvements of 43.7% and 32.4% over a subject-specific (personalized) CNN-only baseline. SHAP-based analysis confirmed that the introduced morphology-prior features align with individual vascular characteristics, reinforcing per-subject interpretability. These findings highlight the potential of personalized, physiology-guided hybrid learning with novel morphological descriptors for accurate and explainable BP monitoring in real-world settings.

Accurate pre-deployment estimation of CNN inference cost--energy, latency, and peak memory--is increasingly critical as models are deployed on resource-constrained GPU platforms. Existing approaches rely on FLOPs, latency measurements, or single-device profiling as energy proxies, overlooking the non-linear interactions between architectural design and hardware load. We present a workload characterization study of 13 419 CNN configurations on two GPU platforms (RTX 5090 and RTX 3080) under GPU telemetry, revealing that energy, latency, and memory exhibit fundamentally distinct scaling behaviors: energy and latency diverge by 3x under high computational demand, and cross-GPU transferability differs by target--energy and latency require platform-specific models while memory transfers well across the two tested platforms. Building on these characterization findings, we develop CARB, a cascade-blended ensemble that jointly predicts all three targets with R2 ~0.99, and a two-stage deployment screening workflow that eliminates over 90% of candidates in seconds, reducing large design spaces to a Pareto-prioritized shortlist validated against real hardware.

Despite the success of convolutional neural networks in image classification tasks and their general application in multi-modal models, their susceptibility to out-of-distribution and adversarial attack samples raises concerns regarding trustworthiness and safety. Among the approaches to tackle such issues, detection methods that analyze the model's intermediate activations to estimate a confidence score are a promising family that evaluates the decision process, relying on a dimensionality reduction step to enable efficient downstream processing of the high-dimensional activations. However, when considering convolutional layers, the dimensionality reduction methods in the literature either lack a mechanism to control the compression/information-loss trade-off or yield large representations. In this paper, we carefully analyze two state-of-the-art detection methods and their dimensionality reductions for convolutional layers and develop a novel reduction method with a controllable high-compression level. We extend these two state-of-the-art detection methods, enabling the usage of any dimensionality reduction, and evaluate their performance on out-of-distribution and adversarial attack detection. Results show that the detection methods with the proposed dimensionality reduction consistently perform better than, or comparable to, the strongest alternative. Furthermore, the proposed method is shown to reduce computation and memory footprints, given that it has the highest compression among the compared methods.

To address the degradation of bearing fault diagnosis accuracy under strong noise, this paper proposes a time-frequency dual-domain multi-scale convolutional neural network. The time-domain branch employs three parallel convolutional kernels to capture multi-scale impulse features, while the frequency-domain branch applies the Fast Fourier Transform to extract noise-robust spectral structure information. Features from both branches are fused for fault classification, yielding a compact model of 110,122 parameters. Experiments on the CWRU bearing dataset across seven signal-to-noise ratio levels demonstrate that the proposed method achieves 99.75% accuracy under clean conditions and maintains 92.50% at -4 dB SNR, representing a 7.25 percentage-point improvement over the single-domain baseline with monotonically increasing gains under stronger noise. Ablation experiments validate the independent performance contributions of the time-domain multi-scale branch and the frequency-domain branch. Comparative experiments against WDCNN, DRSN-CW, MCNN, and 1D-LeNet confirm the superiority of the proposed method under strong noise conditions.

The large-scale oceanic and atmospheric forecasts provided by global climate models typically lack sufficient resolution to accurately capture the response of the coastal ocean to atmospheric forcing and coastal circulation that drive fine-scale SST variability. Dynamical downscaling is computationally prohibitive, when applied to extensive coastlines, predictive ensembles, or long time periods. Therefore, this work presents a statistical downscaling of sea surface temperature (SST) from the seasonal coupled ocean-atmosphere forecast system (ACCESS-S2) using machine learning techniques. This study proposes a novel deep learning framework that uses a U-Net to generate an initial high-resolution SST estimate, which is subsequently refined using a residual corrective approach. The target SST fields are derived from the Regional Ocean Modeling System (ROMS). This two step approach called Residual Corrective Neural Network (RCNN) progressively refines initial U-Net predictions by incorporating dynamically scaled residuals at each step, enabling accurate capture of broad patterns and fine-grained features such as eddies and fronts. We also introduce a custom loss-assisted RCNN variant to improve performance during extreme events, which may be absent from training data due to climate-driven shifts in SST extremes. The framework efficiently downscales SST along the west coast of Australia. A 2011 marine heatwave case study shows that the RCNN improves ACCESS-S2 SST predictions by increasing horizontal resolution from 25 km to 2 km, enabling identification of fine-scale anomalies unresolved in the ACCESS-S2 dataset. This balance between computational efficiency and accuracy supports applications in coastal impact assessment and marine ecosystem studies.

Accurate and robust time series forecasting is essential in many applications involving physical processes, such as manufacturing monitoring and astrophysical event detection. In these settings, predictive models must remain reliable under noise, variability, and measurement uncertainty while capturing temporally localized structures corresponding to physically meaningful events. Convolutional neural networks (CNNs) are widely used for such tasks due to their computational efficiency and strong representational capacity. However, their learned temporal representations often exhibit unstable or physically inconsistent attention patterns, reducing robustness, generalization, and interpretability. This paper introduces PhysAttNet, a physics-informed attention framework for time series forecasting. PhysAttNet augments a lightweight CNN forecaster with an attention head guided by domain-informed regularization reflecting the structural properties of physical signals. Specifically, three complementary constraints are imposed during training: an alignment regularization that encourages attention to follow smooth, peak-centered temporal structures derived from the input signal, a smoothness regularization that enforces continuous temporal evolution, and a sparsity regularization that promotes selective focus on informative intervals. These differentiable regularization terms introduce physics-guided inductive bias without requiring annotated explanations or manual supervision. Experiments on two distinct applications, namely predicting cutting forces during milling and forecasting flares in blazar time series, demonstrate that PhysAttNet improves forecasting accuracy, generalization, and prediction performance on structurally important events.

Replay-free parallelized Q-learning removes the large experience replay buffers and target networks used by conventional deep Q-learning, but the role of network architecture in this training regime remains comparatively underexplored. We investigate this question through a progressive three-phase study within the Parallelized Q-Network (PQN) framework. First, we compare eight convolutional encoder topologies on Atari-57 under a common training protocol while jointly considering performance and computational complexity. Second, we integrate Hadamax-style multiplicative feature interactions and explicit pooling into the selected encoder hierarchy. Third, with the visual representation fixed, we compare complete categorical-dueling, ensemble-dueling, and categorical ensemble-dueling value-estimation configurations. The resulting architecture, Aftab, achieves an interquartile mean human-normalized score of $6.592$ on Atari-57, compared with $2.715$ for our independently rerun PQN reference, with a game-level Probability of Improvement of $0.86$. After completing all architecture selection on Atari-57, we evaluate Aftab on Procgen Hard. Aftab achieves a terminal IQM normalized score of $0.418$ compared with $0.382$ for PQN and increases the normalized area under the learning curve from $0.216$ to $0.541$, although terminal performance remains heterogeneous across environments. These results show that visual topology, multiplicative representation, and downstream value-estimation design can substantially affect replay-free Q-learning, and that their benefits should be evaluated jointly with computational complexity. The complete Aftab framework, including model definitions, training configurations, reproducibility settings, and raw experimental logs, is open-sourced at https://github.com/tahashieenavaz/aftab

Deaf and hard-of-hearing people in Bangladesh communicate mainly through Bangla Sign Language (BdSL). Automatic BdSL recognition on personal devices could widen access to education and services. Existing systems use controlled-setting datasets without expert verification and heavyweight pretrained backbones unsuited to on-device use. We introduce RSBdSL38, 10,874 expert-validated images spanning all 38 BdSL hand signs, representing the 51 letters of the Bangla alphabet, recorded from real signers at three special-needs schools across Bangladesh. We propose a lightweight attention based convolutional network of 298,470 parameters, built from grouped bottleneck residual blocks, channel and spatial attention, a multi-scale depthwise hand-feature block, dual pooling, and Swish activations. Trained from scratch, it attains 96.37% accuracy (95.72% +- 0.54% over five seeds), within 1.08 percentage points of the best of nine ImageNet-pretrained efficient architectures under an identical protocol, using 8.5 to 68x fewer parameters and 1.3 to 21.7x fewer MACs. Retrained, it reaches 92.95 to 98.33% on six public BdSL benchmarks, 97.04% on a merged corpus, and 76.25% zero-shot on BdSL-38. Removing any architectural stage costs 7.61 to 89.30 points, against at most 3.17 for the training recipe. Grad-CAM with deletion-insertion and weight-randomization checks confirms that predictions follow the signing hand. A signer-independent split holding out 6 of 36 signers yields 85.18%. Quantized to 0.48 MB, it runs at 3.98 ms per image within a 15.5 MB footprint on a commodity smartphone. Together, RSBdSL38 and our from-scratch model turn benchmark accuracy into deployable accessibility at a fraction of pretrained-backbone cost; dataset, code, and models are released.

We introduce the neural echo as a tool for understanding the behavior of neural networks. It generalizes the model-based concepts of impulse responses, diffusion echoes, and filter echoes to learning-based methods. It provides local, space-adaptive impulse responses and filter kernels for a neural network, its so-called echoes. These echoes depend on the input image and can be visualized to understand the learned dynamics of the network via an affine mapping. Neural echoes build a bridge from classical signal processing to modern explainable AI. They are very general and can be applied to both image-to-image and classification networks, with convolutional or fully connected structure, of feedforward or recurrent type, including modern transformer networks. Network differentiability is not required. In the differentiable case, neural echoes comprise concepts based on the network Jacobian, such as saliency maps and the analysis of adversarial perturbations, as special instances. As a simple blueprint to explain our framework, we derive neural echoes for the denoising convolutional neural network (DnCNN). Our experiments suggest that this network weights pixels based on their spatial and gray value distances. This not only clarifies its behavior, but also shows that it can reproduce key concepts of classical model-based denoisers such as bilateral filtering.

Brain tissue microstructure estimation with machine learning provides higher computational efficiency than conventional fitting. However, machine learning still presents important limitations that hamper its clinical utility. Specifically, current models typically lack generalisation across diffusion MRI acquisition protocols and require retraining whenever b-vectors or b-values change. Moreover, the recent machine learning methods that were developed to address protocol generalisation lack rotational equivariance. Particularly suitable for dMRI parameter estimation is a geometric deep learning model known as spherical convolutional neural network (SCNN), which guarantees rotational equivariance and b-vector generalisation. However, this architecture currently does not account for b-values. Therefore, obtaining a model that combines protocol generalisation and rotational equivariance remains an open challenge. In this paper, we directly address this issue by incorporating explicit b-value dependence into an SCNN architecture via a hypernetwork. This new approach is illustrated using NODDI as an example forward model for estimating brain tissue microstructure. To evaluate b-value generalisation, the original and newly proposed SCNN architectures are trained on synthetic data and tested on both synthetic and real data across different b-value pairs. Results demonstrate that the proposed method achieves reduced RMSE and bias on synthetic data, as well as higher agreement with conventional NODDI fitting on real data, indicating improved robustness to unseen b-values and a reduced need for retraining. By combining generalisation across b-values with generalisation across b-vectors and rotational equivariance, the proposed framework enhances the applicability of deep learning to clinical diffusion MRI parameter estimation. Code available at https://github.com/aerdnairo/arXiv\_generalisedSCNN.

Convolutional neural networks (CNNs) are widely used for time-series classification, but their deployment in critical domains requires understanding the temporal and spectral patterns that drive their predictions. Concept extraction (CE) methods identify such patterns by analyzing representations within the models' latent space. However, existing time-series CE methods have three limitations: they operate only in the time domain and overlook frequency features, predefine the number of concepts, and produce localizations misaligned with the regions the model uses. We address these limitations by proposing CENDRe, a concept extraction method for CNNs. It first discovers concepts by clustering per-timestep latent representations in two stages, where silhouette-guided aggregation selects the number of concepts automatically. Then, it localizes each concept through gradients of a presence score that contrasts the latent representations with their prototypes, producing masks that concentrate on the regions driving the concept. These gradients, propagated through a differentiable invertible mapping of the input such as a Fourier transform, yield localizations for the same concepts in the frequency domain. Finally, each concept receives a relevance score that quantifies its contribution to each class. On synthetic benchmarks, CENDRe achieves representation correctness comparable to state-of-the-art CE methods and significantly higher importance correctness. On real bearing-fault data, CENDRe extracts the frequency bands driving the model's predictions, located in regions commonly inspected for fault diagnosis, producing evidence to assess the model that time-domain CE methods cannot.