Convolutional Neural Networks

Also known as CNN

Follow this topic Ask about this topic

Latest papers 397

39 papers in the last four weeks, up 26% on the four weeks before. 0.2% of all new papers.

Jul 9, 2026

Deep Learning for Joint Narrowband Interference Cancellation and Soft Demodulation in OFDM Systems

Narrowband interference (NBI) severely degrades orthogonal frequency-division multiplexing (OFDM) systems by corrupting subcarriers and rendering classical soft demodulation ineffective. Conventional compressed-sensing (CS) mitigation exhibits high sequential latency and leaves structured, non-Gaussian residuals that cause log-likelihood ratio (LLR) unreliability, decoder saturation, and severe error floors when employing classical Gaussian demappers. We resolve this pipeline mismatch using a unified deep learning framework for joint NBI cancellation and robust soft demodulation. First, NBI-CNet employs a physics-informed convolutional architecture to estimate NBI parameters and remove multi-tone interference in a single forward pass. Without requiring prior knowledge of the active interferer count, NBI-CNet reduces computational complexity by up to 60% (

N{=}2048, Q{=}64

) compared to the state-of-the-art EOMP-IDS algorithm. Second, LLR-CNet acts as a structural whitener by mapping non-Gaussian post-mitigation residuals onto well-calibrated soft metrics. Simulations demonstrate that this joint framework eliminates the error floors inherent to traditional baselines across dense grids. Under severe interference (

\text{SIR}{=}{-}10

dB), the pipeline operates within a

0.2

to

0.5

dB SNR margin of the optimal iterative baseline at a target block error rate (BLER) of

10^{-4}

. Under mild interference (

\text{SIR}{=}10

dB) with heavy spectral overlap (

Q{=}12

), where classical greedy algorithms erroneously subtract valid data components and corrupt the payload, NBI-CNet avoids signal-peak confusion to deliver a coding gain exceeding

3

dB. Finally, the architecture circumvents the

2{\times}10^{-4}

error floor triggered by interferer-estimation errors, while its scale-invariant design enables robust generalization across arbitrary FFT sizes without retraining.

Emmanouil Kavvousanos, Francky Catthoor, Vassilis Paliouras

Department of Electrical and Computer Engineering, University of Patras, Greece · Department of Electrical and Computer Engineering, National Technical University of Athens, Greece

Wireless Communications Convolutional Neural Networks

Jul 9, 2026

Texture Representations in Deep Vision Models: Comparing CNNs, Vision Transformers, and Human Perception

In computational vision science, Convolutional Neural Networks (CNNs) have emerged as a popular model of biological vision because of the alignment they can exhibit with neural and behavioral data in humans and animals. However, it remains unclear to what extent this alignment persists for visual tasks that extend beyond the canonical object recognition paradigm based on well defined semantic content. In this study, we diverge from the common object-centric view by focusing on another aspect of vision: texture perception. We consider textures of different complexity generated with three different algorithms from the same source images. Using a rank-based statistic, we quantify the information encoded in the internal representations of a CNN and three Vision Transformers (ViTs), and we compare the similarity of these representations to those inferred from human psychophysics data. We find that the representation of textures is aligned in different ViTs, but not between the ViTs and the CNN; that ViTs form similar representations for textures of different complexity; that human performance in recognizing textures can be better predicted from ViTs representations rather than CNN representations. Taken together, these results suggest that ViTs may capture more faithfully than CNNs how texture patterns are visually processed by humans, and that the representations of texture stimuli in computational models may be driven by the network architecture.

Ludovica de Paolis, Marco Baroni, Alessandro Laio +1

Department of Neuroscience, International School for Advanced Studies (SISSA), Trieste, Italy · Department of Language and Translation Sciences, Pompeu Fabra University, Barcelona, Spain · ICREA, Barcelona, Spain +1

Visual Representation Learning Vision Transformer Convolutional Neural Networks

Jul 8, 2026

A Theory of Contrastive Learning with Natural Images

Why does contrastive learning with simple images and augmentations yield useful representations for downstream tasks? We address this question by analytically computing the optimal representation in terms of a contrastive loss for a range of basic augmentations and any image dataset with stationary statistics. We show that for certain augmentations the optimum can be attained by a CNN whose first layer filters are sinusoids, followed by a pointwise nonlinearity, global average pooling, and a final linear layer that performs partial whitening. We also show that the optimal weights in such CNNs for more complicated augmentations are still sinusoids. The frequencies of the sinusoids and their weights can be computed using a simple waterfilling algorithm given the dataset's expected power spectrum. Experiments with different image datasets and augmentations show that such CNNs trained with SGD empirically learn sinusoids in their first layer and to perform partial whitening

Antonio Torralba, Yair Weiss

CSAIL, MIT · School of Computer Science and Engineering, Hebrew University of Jerusalem

Contrastive Learning Frequency-Domain Feature Learning Convolutional Neural Networks

Jul 8, 2026

EdgeCompress: Coupling Multidimensional Model Compression and Dynamic Inference for EdgeAI

Convolutional neural networks (CNNs) have demonstrated encouraging results in image classification tasks. However, the prohibitive computational cost of CNNs hinders the deployment of CNNs onto resource-constrained embedded devices. To address this issue, we propose EdgeCompress, a comprehensive compression framework to reduce the computational overhead of CNNs. In EdgeCompress, we first introduce dynamic image cropping (DIC), where we design a lightweight foreground predictor to accurately crop the most informative foreground object of input images for inference, which avoids redundant computation on background regions. Subsequently, we present compound shrinking (CS) to collaboratively compress the three dimensions (depth, width, and resolution) of CNNs according to their contribution to accuracy and model computation. DIC and CS together constitute a multidimensional CNN compression framework, which is able to comprehensively reduce the computational redundancy in both input images and neural network architectures, thereby improving the inference efficiency of CNNs. Further, we present a dynamic inference framework to efficiently process input images with different recognition difficulties, where we cascade multiple models with different complexities from our compression framework and dynamically adopt different models for different input images, which further compresses the computational redundancy and improves the inference efficiency of CNNs, facilitating the deployment of advanced CNNs onto embedded hardware. Experiments on ImageNet-1K demonstrate that EdgeCompress reduces the computation of ResNet-50 by 48.8% while improving the top-1 accuracy by 0.8%. Meanwhile, we improve the accuracy by 4.1% with similar computation compared to HRank, the state-of-the-art compression framework. The source code and models are available at https://github.com/ntuliuteam/edge-compress

Hao Kong, Di Liu, Shuo Huai +5

School of Computer Science and Engineering, Nanyang Technological University (NTU), Singapore · HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University (NTU), Singapore · Department of Computer Science, Norwegian University of Science and Technology (NTNU), Trondheim, Norway +1

Edge Inference Convolutional Neural Networks Neural Network Compression Image Classification

Jul 8, 2026

Smart Scissor: Coupling Spatial Redundancy Reduction and CNN Compression for Embedded Hardware

Scaling down the resolution of input images can greatly reduce the computational overhead of convolutional neural networks (CNNs), which is promising for edge AI. However, as an image usually contains much spatial redundancy, e.g., background pixels, directly shrinking the whole image will lose important features of the foreground object and lead to severe accuracy degradation. In this paper, we propose a dynamic image cropping framework to reduce the spatial redundancy by accurately cropping the foreground object from images. To achieve the instance-aware fine cropping, we introduce a lightweight foreground predictor to efficiently localize and crop the foreground of an image. The finely cropped images can be correctly recognized even at a small resolution. Meanwhile, computational redundancy also exists in CNN architectures. To pursue higher execution efficiency on resource-constrained embedded devices, we also propose a compound shrinking strategy to coordinately compress the three dimensions (depth, width, resolution) of CNNs. Eventually, we seamlessly combine the proposed dynamic image cropping and compound shrinking into a unified compression framework, Smart Scissor, which is expected to significantly reduce the computational overhead of CNNs while still maintaining high accuracy. Experiments on ImageNet-1K demonstrate that our method reduces the computational cost of ResNet50 by 41.5% while improving the top-1 accuracy by 0.3%. Moreover, compared to HRank, the state-of-the-art CNN compression framework, our method achieves 4.1% higher top-1 accuracy at the same computational cost. The codes and data are available at https://github.com/ntuliuteam/smart-scissor

Hao Kong, Di Liu, Shuo Huai +5

School of Computer Science and Engineering, Nanyang Technological University, Singapore · HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University, Singapore · HP Inc., Palo Alto, California, USA

Efficient Neural Network Inference Edge Inference Convolutional Neural Networks Neural Network Compression

Jul 7, 2026

MSA-DCNN: A Data-Efficient Multi-Scale Deformable CNN for Medical Image Classification

Existing deep learning methods perform well in medical image classification but struggle with multi-scale morphology and limited annotations due to fixed sampling and data-hungry training. Existing approaches address these challenges in isolation: DCN-based models provide adaptive sampling but lack explicit multi-scale attention fusion and label-efficient regularisation; multi-scale architectures typically rely on static fusion; and semi-supervised methods target label scarcity without jointly modelling adaptive cross-scale representations. We propose MSA-DCNN, a scale-consistent deformable attention learning framework that introduces adaptive multi-scale sampling, within-scale saliency refinement, learned cross-scale fusion, and auxiliary self-distillation within a unified optimisation scheme, with potential to generalise to structurally heterogeneous anatomy. We evaluate on three public benchmarks and an external hold-out set for leukaemia. MSA-DCNN demonstrates competitive and often better performance against ViT baselines, CNN baselines, and a MICCAI semi-supervised baseline under distribution shift and label scarcity in accuracy, F1, and AUC (binary), while using fewer parameters. Ablations confirm complementary component contributions, supporting MSA-DCNN as a practical foundation for data-efficient medical image classification.

Hamza Hussaini, Shahana Bano, Eyad Elyan +1

Robert Gordon University, School of Computing, Engineering and Technology, Aberdeen, Scotland, UK

Multi-Scale Feature Fusion Medical Image Classification Convolutional Neural Networks Deformable Convolution

Jul 5, 2026

CoFINN: Conservation Flux Informed Neural Networks for Physics Problems Governed by Conservation Laws

We present CoFINN (Conservation Flux Informed Neural Networks), a physics-informed deep learning framework for predicting compressible flow fields governed by conservation laws. Unlike conventional data-driven convolutional neural networks (CNNs), which optimize only pixel-wise similarity metrics, CoFINN embeds finite-volume conservation physics directly into the training process. Unlike classical physics-informed methods which enforce differential-equation residuals at collocation points through automatic differentiation, CoFINN adopts a finite-volume perspective consistent with modern CFD methodology. CoFINN interprets CNN output fields as structured computational grids, where each pixel represents a finite-volume cell, and enforces conservation consistency through sophisticated numerical flux calculations. The framework is evaluated on transonic flow prediction around airfoils at (M=0.7, Re=6 * 10^6), including challenging conditions involving shock waves and high angles of attack. Results show that CoFINN improves aerodynamic force prediction accuracy, reducing drag prediction error by up to 34% at extreme angles of attack and by approximately 15% on average across the test set. Improvements are particularly significant in limited-data regimes, demonstrating that the conservation-based loss acts as an effective physical regularizer. The proposed approach maintains the computational efficiency advantages of CNN surrogates while significantly improving physical consistency and conservation behavior. The framework is architecture-agnostic and extensible to broader classes of conservation-law-governed physical systems.

Adnan Harun Doğan, Mert Deniz, Hande Alemdar +1

Dept. of Computer Engineering Middle East Technical University Ankara, Turkey · Dept. of Mechanical Engineering Middle East Technical University Ankara, Turkey

PDE Surrogate Modeling Physics-Informed ML Convolutional Neural Networks Computational Fluid Dynamics

Jul 3, 2026

Seeing Through WiFi: Lightweight Human Pose Estimation with Dynamic Kernel Attention

WiFi-based human pose estimation (HPE) enables the detection and interpretation of human body positions and movements without the need for wearable devices while preserving individual privacy concerns. Implementing this solution requires enhancing model performance and maintaining efficiency, especially on resource-constrained devices. This paper introduces a novel framework, WiLHPE, for lightweight and efficient human pose estimation using WiFi CSI signals. Empowered by a camera-based model during training, WiLHPE processes raw WiFi signals directly to estimate human poses in the testing phase. It employs a novel neural network architecture to dynamically learn convolutional kernels and apply attention mechanisms across channel and frequency spaces. This innovative method diversifies the kernels to improve the recognition capabilities of WiFi signals without adding complexity, ensuring efficiency. Additionally, the Tree-Structured Parzen Estimator algorithm is employed to optimize the critical hyperparameters of the neural network efficiently, minimizing the time required for optimal hyperparameter search compared to heuristic methods. Results from experiments on both the MM-Fi and WiPose datasets highlight the superiority of WiLHPE over state-of-the-art approaches, achieving 85.96% and 94.27% at PCK50, respectively, with minimal computational overhead. Notably, WiLHPE performs impressively even under challenging conditions, maintaining around 80% at PCK50 under AWGN noise with an error variance of 0.5.

Toan D. Gian, Van-Dinh Nguyen, Vo Phi Son +5

Smart Green Transformation Center (GREEN-X), VinUniversity, Vietnam · Trinity College Dublin, Ireland · University of Oulu, Finland +3

Dynamic Convolution Channel Attention Human Pose Estimation Convolutional Neural Networks Wi-Fi Sensing

Jul 3, 2026

Pooling-Based Context Modeling for Convolution-Free Deep Image Prior

Convolutional Neural Networks (CNNs) achieve strong denoising performance by exploiting spatial context from neighboring pixels. Deep Image Prior (DIP) leverages this property to restore images from a single noisy input without requiring large datasets. However, the over-parameterized architecture of DIP often leads to noise fitting during optimization. In this paper, we propose Pool-DIP, a convolution-free architecture that incorporates pooling-based contrast modeling to capture spatial context efficiently. Pool-DIP improves denoising performance while significantly reducing the number of parameters and computational complexity compared to convolution-based DIP models. Experimental results show that Pool-DIP achieves competitive performance across multiple datasets, including a real-world benchmark. Spectral analysis further reveals that Pool-DIP stabilizes the evolution of high-frequency components during optimization and suppresses erroneous high-frequency signals. The proposed architecture also generalizes well to other image restoration tasks such as super-resolution and inpainting.

Gihyun Kim, Jong-Seok Lee

Yonsei University Republic of Korea

Image Restoration Convolutional Neural Networks Image Denoising

Jul 2, 2026

WBMM: Windowed Batch Matrix Multiplication for Efficient Large Receptive Field Convolution

Large kernel depthwise convolutions achieve strong performance but suffer from significant degradation as kernel size grows due to irregular memory access from gather-based computation; while Large Kernel Acceleration (LKA) helps on small feature maps, it becomes counterproductive on large feature maps, even slower than non-accelerated implementations. We propose Windowed Batch Matrix Multiplication (WBMM), which partitions input into contiguous windows and indexes a compact relative position bias table to construct weight matrices, enabling regular memory access via batched matrix multiplication. This yields a unique property: WBMM's throughput improves with larger windows, opposite to depthwise convolutions that degrade with larger kernels. Operator-level benchmarks show WBMM with 14x14 windows outperforms 5x5 depthwise convolution baselines in speed while providing a 7.8x larger per-layer receptive field. Combined with inter-block cross-window communication and hierarchical window reparameterization, WBMM achieves comparable or higher accuracy on ImageNet-1K, COCO, and ADE20K with 1.31-1.88x training speedup, and demonstrates consistent advantages across GPU, CPU, and edge devices without requiring specialized acceleration kernels. Our code is available at http://github.com/wansong-s/WBMM

Wan Song, Wei Zhou, Rui Wang +4

Hefei University of Technology, Hefei, China · Lingyang Industrial Internet Co., Ltd., Hefei, China · Kochi University of Technology, Kochi, Japan.

GPU Kernel Optimization Convolutional Neural Networks

Jul 2, 2026

Do Newer Lightweight CNNs Perform Better Under Resource Constraints? A Controlled Multigenerational Study of Architecture, Initialization, Training Budget, and Efficiency

Newer lightweight convolutional neural networks are often presented as improving predictive performance and deployment efficiency, but such claims require controlled evaluation. This study compares nine lightweight CNN model packages across CIFAR-10, CIFAR-100, and Tiny ImageNet under a shared downstream protocol. We report top-1 accuracy, macro F1, top-5 accuracy, parameter count, FP32 storage, GMACs, batch-size-1 latency on an NVIDIA L4 and AMD Ryzen 5 5500U CPU, peak PyTorch CUDA allocated tensor memory, and point estimate Pareto frontiers. EfficientNetV2-S achieves the highest observed top-1 accuracy on CIFAR-10 and CIFAR-100 at 97.57% and 86.98%, while RepViT-M1.0 leads Tiny ImageNet at 79.87%. EfficientNet-B0 remains within 0.22, 0.85, and 1.79 percentage points of the best result on the three datasets while using approximately 79% fewer parameters and 86% fewer GMACs than EfficientNetV2-S. It also appears on every evaluated accuracy and resource Pareto frontier, making it the most consistently competitive intermediate-budget option. MobileNetV3-Small has the lowest GMAC count, is the fastest model under both CPU thread settings, and records higher observed accuracy than MobileNetV4-Conv-S on all three datasets. Under random initialization, it leads MobileNetV4-Conv-S by 2.55, 1.76, and 0.99 points, with paired test-set intervals excluding zero for the fixed trained models. EfficientNet-B0 remains 3.29, 10.10, and 17.54 points below its pretrained counterpart after 100 epochs of scratch training, despite requiring about five times the recorded training time. SqueezeNet1.1 has the fewest parameters and lowest peak CUDA allocation, but substantially weaker accuracy. Latency rankings differ sharply between the L4 and CPU environments, showing that GMACs alone do not predict measured inference performance. Overall, newer designs provide selective rather than universal gains

Tasnim Shahriar

Independent Researcher

Efficient Neural Network Inference Convolutional Neural Networks Lightweight CNNs Image Classification

Jul 2, 2026

Neural Audio Codec with Adjustable Token Temporal Resolution Using Sampling-Frequency-Independent Convolutional Layers

Discrete tokens obtained from neural audio codecs (NACs) have been used as compact representations in audio generation and understanding models. In such token-based systems, token temporal resolution (TTR), defined as the time interval between adjacent token frames, is important because it controls the trade-off between representing rapid acoustic events and reducing token-sequence length. However, most NACs are trained at a single TTR and require separate training for each TTR. This paper proposes a mechanism that enables a single NAC to operate at multiple TTRs using sampling-frequency-independent convolutional layers. The mechanism regards TTR as the sampling period of the token sequence and generates TTR-dependent convolutional kernels from a shared parameter set, while adjusting the kernel size and stride for each TTR. We incorporate the mechanism into Descript Audio Codec, leaving the quantizer unchanged. Experiments on environmental sound reconstruction show that the proposed model outperforms a single-model baseline that switches TTR-specific layers for each TTR.

Tomohiko Nakamura, Wataru Nakata, Kanami Imamura +1

The National Institute of Advanced Industrial Science and Technology (AIST), 2-4-7 Aomi, Koto-ku, Tokyo, 135-0064 Japan · The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8654 Japan

Neural Audio Codecs Audio Tokenization Convolutional Neural Networks

Jul 1, 2026

CNN Models for Microphone Array Covariance Matrix Upsampling and Acoustic Imaging

Acoustic imaging visualization is a core methodology in acoustics, enabling spatial analysis of sound sources and acoustic scenes. However, limited sensor availability in practical systems motivate approaches that enhance spatial resolution without increasing the hardware complexity. In this paper, we focus on upsampling virtually a tetrahedral 4-microphone array to a spherical 32-microphone array by estimating the covariance matrices of the channels employing deep learning techniques. Five neural network architectures are investigated for covariance upsampling for acoustic imaging using the real-world STARSS23 dataset. These models are developed to estimate a 32-microphone, time-frequency covariance matrix from a 4-microphone input covariance representation. The proposed architectures are based on 2D convolutional layers to capture the underlying spatial-spectral structure of covariance matrices, and are further enhanced with frequency dynamic convolution to model their frequency-dependent properties. The proposed architectures are evaluated in terms of root mean square error (RMSE) and using delay-and-sum beamforming acoustic imaging. Quantitative results show that all models outperform a random-guess baseline, which yields an RMSE of 0.548, with the best-performing architecture achieving an RMSE of 0.432. We analyze qualitatively the performance of the proposed models through beamforming heatmap visualizations derived from the 4-channel input covariance, the 32-channel ground truth, and the predicted 32-channel covariance matrices. These results demonstrate that covariance upsampling significantly enhances the effective performance of the 4-channel microphone array, producing sound maps that closely resemble those obtained with the 32-channel array.

Marianthi Adamopoulou, Parthasaarathy Sudarsanam, David Diaz-Guerra +5

Dept. of Comp. and Elec. Engineering Mid Sweden University Sundsvall, Sweden · Audio Research Group, Tampere University Tampere, Finland

Dynamic Convolution Convolutional Neural Networks

Jun 30, 2026

Computer vision-based neural networks for radioisotope identification in urban environments

Algorithm development for radioisotope identification in mobile urban search scenarios face significant challenges from non-uniform backgrounds, momentary source encounters, and severe class imbalance between rare threat signatures and background measurements. We present a machine learning-based approach to this problem that converts list-mode gamma-ray data into two-dimensional waterfall spectrograms and applies computer vision architectures to the resulting images. Rather than treating waterfalls as conventional images, we employ a representation where consecutive time spectra can form input channels, similar to RGB channels in color images. This representation encodes both spectral and temporal information, enabling neural networks to more effectively learn patterns that distinguish source signatures from background fluctuations. We evaluate three architectures, a multilayer perceptron (MLP), convolutional neural network (CNN), and vision transformer (ViT), on the Radiological Anomaly Detection and Identification (RADAI) benchmark dataset. At a false positive rate of less than one false alarm per hour, our CNN outperforms the previous-best non-negative matrix factorization (NMF) method across all global metrics, achieving true detection, classification, and identification rates of 0.4334, 0.3965, and 0.2950 respectively, compared to 0.4151, 0.3611, and 0.2625 for NMF. At lower false positive rate constraints, the neural network approaches show comparable but ultimately lower performance than NMF, indicating opportunities for further research.

Masen Bachleda, Peter Lalor

Pacific Northwest National Laboratory, Richland, WA 99354 USA

Convolutional Neural Networks

Jun 29, 2026

Separation Capacity of Scattering Networks

In this paper, we attempt to enhance the theoretical understanding of convolutional neural networks (CNNs) as feature extractors in classification tasks by analyzing them through the lens of Cover's function-counting theory. Specifically, our focus lies on the notion of separation capacity, a combinatorial quantity derived from counting the number of realizable dichotomies (i.e., binary label assignments). Our contributions are threefold. First, we extend Cover's framework by establishing a conceptually insightful and practically useful formulation for the separation capacity. Second, leveraging this formulation, we identify the factors governing the separation capacity of feature extractors that employ a specific CNN architecture, so-called scattering networks, in terms of their network building blocks. Third, we provide practical insights for scattering network design.

Konstantin Häberle, Helmut Bölcskei

ETH Zurich

Convolutional Neural Networks Neural Network Expressivity

Jun 29, 2026

HASTE: A Framework for Training-Free, Dynamic, and Steerable Compression of Pre-Trained Convolutional Neural Networks

Deploying large convolutional neural networks (CNNs) on resource-constrained devices is challenging due to their high computational cost. While dynamic execution methods are promising, existing approaches for CNNs typically require specialized training or fine-tuning, limiting their effectiveness when applied to pre-trained models and requiring data access. To address this gap, we propose HASTE (Hashing for Tractable Efficiency), a plug-and-play convolution module that enables training-free, dynamic compression of large pre-trained CNNs. At inference time, HASTE uses locality-sensitive hashing to identify and merge redundant channels of latent feature maps on a patch-wise basis. This process simultaneously compresses the depth of both input features and their corresponding filters, resulting in computationally cheaper convolutions. We conduct extensive experiments on CIFAR-10 and ImageNet across a range of architectures, demonstrating a 46.2% FLOPs reduction in a ResNet34 on CIFAR-10 with only a 1.25% drop in accuracy, without any retraining. We support our claims by comprehensive ablation studies to validate our core design choices, an analysis of the method's properties and limitations, and a discussion that connects our channel merging scheme to the conceptually related task of token merging in Vision Transformers. Our results demonstrate that HASTE provides an effective solution for steerable compression of pre-trained CNNs at runtime, opening new possibilities for the deployment of efficient deep learning methods.

Lukas Meiner, Jens Mehnert, Alexandru Paul Condurache

Robert Bosch GmbH, Leonberg, Germany. · Universität zu Lübeck, Lübeck, Germany.

Efficient Neural Network Inference Convolutional Neural Networks Neural Network Compression

Jun 29, 2026

Real-Time Underwater Image Enhancement via Frequency-Guided Dual-Path Attention

Real-time underwater image enhancement (UIE) is crucial for mobile underwater photography and autonomous robotic systems, where practical deployment typically requires low latency and compact models under constrained computational resources. Recent ultra-lightweight CNNs based on structural re-parameterization meet these constraints but operate purely in the spatial domain, ignoring the frequency-sensitive nature of underwater degradation. To address this, we propose a lightweight UIE framework that integrates two key components: a Multi-Branch Reparameterizable Convolution with Fixed DCT Priors (MBRConv-DCT) that injects structured directional frequency priors during training, and a Frequency-Guided Dual-Path Attention (FGDPA) module that fuses spatial and spectral cues via a dual-path design for adaptive feature modulation. Both components are fully compatible with structural re-parameterization: the convolution branch introduces zero additional inference cost after re-parameterization, while the attention module incurs only a minimal computational overhead. Experiments show our model achieves state-of-the-art performance with only 4.23K parameters and 600+ FPS, outperforming much larger methods in both quantitative metrics and visual quality. Code is available at https://github.com/LethyZhang/FGDPA.

Leshen Zhang, Ao Li, Ce Zhu

Glasgow College, UESTC, Chengdu, China · University of Glasgow, Glasgow, UK · School of Information and Communication Engineering, UESTC, Chengdu, China

Image Enhancement Underwater Image Enhancement Frequency-Domain Image Processing Convolutional Neural Networks Lightweight CNNs

Jun 29, 2026

Evolutionary Hyperparameter Optimization to Find Lightweight CNN Models for Autonomous Steering

This research investigates the optimization of Convolutional and Dense Neural Networks (CNNs and DNNs) for autonomous steering using the (N+M) Evolution Strategy (ES) with the 1/5th success rule. The primary objective is to develop a lightweight CNN based model capable of real-time steering angle prediction, mimicking human driving behavior on predefined paths. The ES algorithm automates hyperparameter tuning, dynamically adjusting parameters such as filter sizes and layer configurations. Data collection encompasses driving scenarios recorded via the LTU ACTor autonomous driving platform, including variations in path direction and driving style. The very small dataset consists of timestamped images labeled with steering angles and pre-processed to focus on relevant visual information. Initial experiments involve training a baseline CNN model, which is then refined using ES to significantly reduce the size of the model while maintaining competitive predictive accuracy. The results highlight the viability of lightweight neural network architectures for real-time autonomous systems, striking a balance between computational efficiency and performance. This study not only advances research initiatives on the use of evolutionary algorithms for autonomous driving applications but also lays the foundation for the deployment of cost-effective and scalable solutions in self-driving technology.

Devson Butani, Ryan Kaddis, Chan-Jin Chung

Dept. of Math and Computer Science Lawrence Technological University Southfield, MI, USA

Efficient Neural Network Inference Autonomous Driving Convolutional Neural Networks Neural Architecture Search Hyperparameter Optimization

Jun 27, 2026

A Deep Multiscale Neural Network for Accurate Neurological Disorder Detection from MRI Scans and Real-Time Web Deployment

Neurological disorders involve diverse pathologies of the brain and nervous system, making early and accurate detection essential. While many deep CNNs have been developed for MRI-based classification of neurological disorders, most are optimized for binary tasks and often fail to capture the multi-class features needed to distinguish subtle anatomical differences across conditions. This study proposes the Enhanced Neurological Disorder Detection Network (End-Net) for multi-class MRI classification of neurological disorders. End-Net includes 24 convolutional layers, beginning with convolutional blocks followed by 21 optimized inception modules. These modules extract multiscale features via parallel 1 x 1, 3 x 3, and factorized 5 x 5 convolutional branches, along with max pooling, enabling the model to capture complementary texture, edge, shape, and contextual information. A global average pooling head, compact fully connected classifier, and dropout reduce parameters, limit overfitting, and improve robustness. End-Net was evaluated on the Multi-Class Neurological Disorder dataset, comprising MRI scans from patients with Alzheimer's disease, brain tumors, multiple sclerosis, and healthy controls. Severe class imbalance was addressed by augmenting minority classes with WGAN-GP and randomly undersampling the majority class. The results show that End-Net outperforms existing architectures in both accuracy and generalization. The model is also integrated into an online system for real-time web-based inference and accessibility.

Ali Fatahi, Hoda Zamani, Mohammad H. Nadimi-Shahraki

Department of Computer Engineering, Na.C., Islamic Azad University, Najafabad, 8514143131, Iran · Big Data Research Center, Na. C., Islamic Azad University, Najafabad, 8514143131, Iran · International Graduate School of Artificial Intelligence, National Yunlin University of Science and Technology, Douliou, Yunlin 640301, Taiwan

Medical Diagnosis Medical Image Classification Magnetic Resonance Imaging Multiclass Classification Convolutional Neural Networks

Jun 25, 2026

State-specific respiratory signatures for affective and stress recognition: Interpretable respiratory markers, autocorrelation lags, and compact CNN models

Respiratory activity is a direct and interpretable physiological channel for wearable stress and affective-state recognition, yet many studies emphasize classification accuracy without identifying which respiratory properties separate different states. Using the chest respiratory channel of the WESAD dataset, we analyze 60 s windows under leave-one-subject-out validation and combine two complementary branches: compact raw-signal one-dimensional convolutional neural networks (1D-CNNs) and physically grouped handcrafted respiratory signatures. The primary task is stress versus non-stress detection, while baseline, stress, amusement, and meditation are additionally analyzed in a one-vs-rest setting to reveal state-specific respiratory markers. The feature space is organized into respiratory timing, breath-to-breath variability, waveform statistics, spectral/time-frequency descriptors, and autocorrelation/nonlinear predictability descriptors, with the raw 60 s signal treated as a sixth representation for the CNN branch. We introduce autocorrelation transition lags (Zpm/Zmp) as interpretable markers of respiratory correlation scale and separately evaluate exploratory forecast-error-growth/Lyapunov-like descriptors. In the final CNN refit setting, the raw-signal model achieved the strongest stress-vs-rest performance (accuracy 96.72%, macro-F1 95.30%, MCC 90.61%). In contrast, compact feature models were stronger for baseline (MCC 65.34%), amusement (MCC 35.69%), and especially meditation (MCC 88.65%). Strict nested reanalysis of the auxiliary Top-20 stress search yielded mean MCC=82.29% versus 85.45% originally, indicating modest selection optimism. These results show that CNNs are most useful for the practical stress detector, whereas interpretable respiratory signatures provide stronger and more physiologically transparent state-specific markers for several non-stress conditions.

Andrei Velichko, Mehmet Tahir Huyut

Institute of Physics and Technology, Petrozavodsk State University, Petrozavodsk, Russia · Department of Biostatistics and Medical Informatics, Faculty of Medicine, Erzincan Binali Yildirim University, Erzincan, Turkey

Wearable Sensing Convolutional Neural Networks Affective Computing

Jun 25, 2026

Automated brain tumor detection in MRI images using CNN and ResNet architectures

Deep learning has shown significant potential in medical image analysis, particularly for disease detection using MRI scans. Accurate and early diagnosis of brain tumors remains challenging due to the complexity of brain structures and reliance on manual interpretation. This work presents an automated deep learning-based approach for brain tumor detection from MRI images using Convolutional Neural Networks and Residual Networks. Transfer learning is applied with two pretrained architectures, ResNet18 and ResNet50, to classify MRI scans into tumor and non-tumor categories. Experiments are conducted on a dataset of 3,929 brain MRI images, evaluating the impact of model depth and fine-tuning strategies. The results show that ResNet18 achieves a higher accuracy of 97% compared to 96% for ResNet50, demonstrating better generalization on limited medical data. The proposed framework enables fast, accurate, and cost-effective brain tumor detection, supporting early diagnosis and clinical decision-making.

Annapurna V K, Asha N, K Paramesha +2

Department of Computer Science and Engineering, The National Institute of Engineering, Mysuru, Karnataka, India. · Department of MCA, The National Institute of Engineering, Mysuru, Karnataka, India. · Department of Computer Science and Engineering, Vidyavardhaka College of Engineering, Mysuru, Karnataka, India. +1

Convolutional Neural Networks Brain Tumor Classification Brain MRI

Jun 24, 2026

Pre-Warm: Initializing Convolutional Filters from First-Batch Patch Dictionaries

Random initialization of convolutional filters does not use the training images. Previous work has shown that image patches can be copied into the first layer, and that k-means or principal components of patches can serve as filters. This paper compares four initializations of the first layer of a small convolutional network, with every other factor held fixed: He initialization, random mean-centered patches, principal components of those patches, and k-means centroids. Pre-Warm, our proposed methodology, is the rule-based use of both dictionaries: the patch count follows the filter count and a foreground density, both dictionaries are built from a single minibatch, and whichever of principal components or k-means better reconstructs those patches is written into the first half of the filter bank, rather than chosen by a validation search. The remaining filters stay random. On five datasets, principal components improve CIFAR-10 and CIFAR-100 relative to He initialization, and k-means improves SVHN and MNIST, and is the stronger of the two on Fashion-MNIST; copying raw patches does not reproduce those color-set gains. Use principal components on photographic patches and k-means on stroke-like patches; the first-batch reconstruction check recovers that split.

Rowan Martnishn

University of Pennsylvania

Neural Network Initialization Convolutional Neural Networks

Jun 23, 2026

Homomorphic Encryptions for Privacy Preserving Vision

Legal requirements might prevent organizations from sharing sensitive data like medical or financial details of consumers which prevents them from leveraging cloud based ML-as-a-service solutions provided by third party providers, which are quickly gaining popularity these days. In this project, we aim to perform inference tasks in Computer Vision in a privacy-preserving manner, i.e, by only looking at encrypted data. Recent advances in fully homomorphic encryption make this possible. A fully homomorphic encryption allows an arbitrary sequence of additive and multiplicative operations to be performed on encrypted data directly. Applying homomorphic encryptions to CNNs requires modifying the conventional CNN layers, so that they adhere to the encryption scheme. Our aim was to explore the best methods to create CNNs which can classify encrypted images directly. We used Microsoft SEAL for performing homomorphic encryption. The performance of these "encryption based CNNs" should be comparable with baseline accuracies of the same CNNs trained on unencrypted data, and the aim was to achieve as low of a hit on inference-time performance as possible. We successfully obtained minimal drop in classification accuracy for various datasets. We used MNIST as our baseline, which is popularly used in related research work and then explored more complex datasets like Kuzushiji MNIST, Fashion-MNIST and CIFAR-10 as a part of our contribution. Additionally, we also added support for more complex operations on top of TenSEAL, like processing colored images (multi-channel input), applying multiple convolutional layers and performing average pooling.

Preey Shah, Rohan Virani, Sanjari Srivastava

Homomorphic Encryption Privacy-Preserving ML Convolutional Neural Networks Image Classification

Jun 23, 2026

Structural Kolmogorov-Arnold Convolutions: Learnable Function on the Values or the Filter Shape as Parameter-Efficient Alternative to Per-Edge Convolutional KANs

Convolutional Kolmogorov--Arnold Networks (KANs) replace the fixed weights of a convolutional kernel with learnable univariate functions. The dominant formulation attaches one such function to every kernel entry and lets it act on pixel values, expressive but parameter-heavy and prone to overfitting. We argue that the learnable functions are better placed in the structure of the convolution than on each edge, and we organise the design space along a single axis: whether the function acts on the pixel values or on the filter shape. We study three realisations. SV-KAN applies one shared univariate function to the values and leaves the spatial filter free and static, aa classical convolution with a single learnable shared activation. AG-KAN keeps the shared value function but supplies the spatial structure through a content-adaptive Gaussian gate. RF-KAN instead moves the learnable functions onto the filter shape, building each filter from oriented ridge profiles expanded in a localised oscillatory (Morlet) wavelet basis with content-adaptive amplitudes. Under a matched four-layer protocol with in-run references and three seeds, RF-KAN and SV-KAN reach

88.47\pm0.10\%

and

88.20\pm0.31\%

on CIFAR-10 and

64.40\pm0.19\%

and

64.57\pm0.30\%

on CIFAR-100, at about

0.4

M parameters. At this matched scale the shape model and the simplest value model meet at the top, both above a plain convolution and every per-edge KAN we tested, including the official Gram variant, at roughly a fifth of the parameters. A controlled study attributes the RF-KAN gain to an intrinsically localised oscillatory basis and to content adaptivity, and an ablation that removes the learned shape entirely, leaving only the shared value function, collapses accuracy by over forty points, identifying the learned shape as the load-bearing ingredient at this scale.

Stefano Mereu, Oleksandr Kuznetsov, Gabriele Marchello +4

Istituto Italiano di Tecnologia, Via Morego 30, 16163 Genoa, Italy · Department of Intelligent Software Systems and Technologies, School of Computer Science and Artificial Intelligence, V. N. Karazin Kharkiv National University, 4 Svobody Sq., 61022 Kharkiv, Ukraine · Department of Information Engineering, Marche Polytechnic University, 60131 Ancona, Italy

Kolmogorov-Arnold Networks Convolutional Neural Networks Image Classification

Jun 22, 2026

Deep learning-based detection of cessation of breathing in pre-term infants

Apnoea of prematurity is characterised by recurrent episodes of cessation of breathing and remains difficult to detect reliably using routinely monitored physiological signals in the Neonatal Intensive Care Unit (NICU). Existing bedside monitors rely primarily on respiratory rate and oxygen saturation thresholds, often generating high false-positive alarm rates and missing short or irregular events. Improving automated detection using routinely acquired clinical signals could enhance identification of clinically meaningful events without additional sensing hardware. We evaluated deep learning-based detection of apnoea-related Cessation Of BrEathing (COBE) events using impedance pneumography (IP), electrocardiography (ECG), and photoplethysmography (PPG) signals from approximately 430 hours of NICU recordings collected from 24 pre-term infants. Three independent reviewers annotated COBE events, producing a dataset of 346 COBE and 608 non-COBE events. We compared a shallow convolutional neural network (CNN), residual networks (ResNets), and a ConvNeXt architecture using an independent held-out test set. Across all architectures, detection performance was influenced more strongly by signal modality than by architectural complexity. Unimodal IP-based models achieved balanced accuracies of 86.8-88.0%, outperforming ECG-derived (62.6-69.7%) and PPG-derived (65.1-66.4%) respiratory surrogates. Multimodal fusion yielded modest improvements over IP alone. The best-performing model, a ConvNeXt architecture combining IP and PPG inputs, achieved 88.7% balanced accuracy and an F1 score of 0.75 on the independent test set. These findings demonstrate that deep learning models applied to routinely monitored NICU signals can reliably detect COBE events and highlight the importance of signal modality in data-constrained neonatal monitoring settings.

Dineo Serame, Lionel Tarassenko, Mauricio Villarroel

Institute of Biomedical Engineering, Department of Engineering Science, University of Oxford, UK

Convolutional Neural Networks

Jun 21, 2026

Performance and Interpretability of Convolutional, Transformer, and Hybrid Deep Learning Models in Colorectal Histology Classification

Deep learning has become an important tool in computational pathology, enabling automated analysis of histopathological images. While convolutional neural networks (CNNs) have traditionally dominated this field, transformer-based and hybrid architectures have recently demonstrated promising performance. However, comprehensive comparisons of these approaches for colorectal histopathology remain limited. This study evaluated twelve ImageNet-pretrained CNN, transformer, and hybrid architectures using the Kather colorectal histopathology dataset containing 5,000 image tiles from eight tissue classes. All models were trained using a standardized transfer-learning and fine-tuning protocol and assessed using multiple performance metrics, including accuracy, precision, sensitivity, specificity, F1-score, ROC-AUC, Cohen's kappa, and Matthews correlation coefficient. All evaluated models achieved high classification performance, with accuracies ranging from 93.2% to 97.1%. EVA-02 achieved the highest overall performance (97.1% accuracy, 97.0% F1-score), closely followed by ViT-B/16. Among CNNs, ResNet34 and ConvNeXt-Tiny demonstrated highly competitive performance, achieving accuracies of 96.4% and 96.3%, respectively. Transformer architectures generally produced the strongest results across evaluation metrics, although the performance gap between the best transformer and CNN models was relatively small. Per-class analysis showed consistently strong classification performance across all tissue categories, with Complex Stroma representing the most challenging class. Overall, transformer-based architectures achieved the highest predictive performance, whereas modern CNNs provided a favorable balance between accuracy and model complexity. These findings provide a comprehensive benchmark of major deep learning paradigms for colorectal histopathology classification.

Reza Bozorgpour

College of Engineering & Applied Science, Department of Biomedical Engineering, University of Wisconsin-Milwaukee, Milwaukee, WI, USA

Hybrid CNN-Transformer Architectures Vision Transformer Convolutional Neural Networks Histopathology Image Classification Medical Image Benchmarks

Jun 21, 2026

Multi-cancer detection using a computationally efficient CNN with transfer learning

This study introduces a computationally efficient convolutional neural network (CNN) architecture enhanced with transfer learning for multi-cancer detection using biomedical images. The proposed lightweight CNN model is designed to reduce computational complexity while maintaining high classification performance, making it suitable for deployment in resource-constrained environments. We evaluate this approach on three distinct tumor datasets comprising brain magnetic resonance imaging (MRI) and lung and kidney computed tomography (CT) scans. The model achieves test accuracy of 90.85 +- 2.22%, 98.64 +- 2.43% and 99.92 +- 0.08% for brain, lung, and kidney cancer classification, respectively, using 5-fold stratified cross-validation (CV). Transfer learning is employed by pretraining the model on one cancer type and fine-tuning it on the others, requiring only 20 additional epochs to achieve performance comparable to models trained from scratch. The fine-tuning process involves updating the classification part of the CNN and requires approximately 0.014 seconds per image per epoch using an NVIDIA GeForce GTX 960. Comparative evaluations show that the proposed model outperforms several state-of-the-art pretrained architectures, such as Xception, VGG16, VGG19, MobileNetV2 and DenseNet121. Overall, the model's effectiveness is evaluated across three types of cancer with distinct morphological characteristics, assessing its performance on both MRI and CT imaging modalities and demonstrating robust performance across diverse tasks and data types. These findings underscore the potential of streamlined deep learning (DL) frameworks in accelerating cancer diagnosis without sacrificing accuracy, especially in settings with limited computational resources.

Vasileios E. Papageorgiou, Georgios Petmezas, Dimitrios-Panagiotis Papageorgiou +2

School of Medicine, Aristotle University of Thessaloniki, Thessaloniki, Greece · Department of Mathematics, National and Kapodistrian University of Athens, Athens, Greece · Department of Mathematics, Aristotle University of Thessaloniki, Thessaloniki, Greece +1

Efficient Neural Network Inference Medical Image Classification Convolutional Neural Networks Brain Tumor Classification

Jun 18, 2026

Physics-Guided Fully Convolutional Spatiotemporal Learning Toward Digital-Twin-Enabled Microstructure Evolution Prediction

Understanding and predicting microstructure evolution is central to materials design, yet purely data-driven spatiotemporal learning models often suffer from limited physical consistency and degraded long-term prediction accuracy. In this work, we introduce a physics-guided fully convolutional spatiotemporal learning framework for microstructure evolution prediction. Unlike prior self-supervised approaches, the proposed method explicitly incorporates governing physical equations into the training objective, thereby encouraging the learned dynamics to remain consistent with known thermodynamic and kinetic laws. This physics-guided formulation improves predictive accuracy, long-horizon stability, and robustness across spatial resolutions and temporal prediction settings. Extensive experiments for spinodal decomposition demonstrate that incorporating physics-guided residual regularization leads to more faithful reproduction of microstructural morphology, statistics, and evolution trends compared with purely data-driven baselines. The proposed framework preserves the scalability and computational efficiency of fully convolutional architectures while bridging the gap between high-fidelity physics-based simulations and data-driven surrogate modeling, offering a reliable and efficient surrogate-modeling step toward digital-twin-enabled microstructure evolution prediction.

Michael Trimboli, Wenxi Liu, Xianqi Li

Department of Mathematics and Systems Engineering, Florida Institute of Technology, Melbourne, FL, 32901, USA

Neural Surrogate Modeling Materials Science Physics-Informed ML Convolutional Neural Networks

Jun 18, 2026

Entropy Estimation in Multi-Qutrit Systems via Variational and Classical Neural Networks

We present a systematic study of von Neumann entropy estimation in multi-qutrit quantum systems using two complementary approaches: variational quantum algorithms (VQAs) and classical convolutional neural networks (CNNs), evaluated using an ideal (noise-free) quantum simulator. For systems up to three qutrits, we construct and evaluate 11 hardware-efficient SU(3)-inspired ansatzes. A parameter sweep shows that estimation accuracy is primarily determined by the number of trainable parameters, provided sufficient entanglement is present. Based on this study, we fix the parameter count to approximately 120 for subsequent experiments, observing that increasing entangling-gate counts beyond a threshold yields only marginal improvements. For larger systems (two to five qutrits), we use a CNN trained on measurement outcomes from tensor-product mutually unbiased bases. The model achieves accurate and stable predictions and exhibits a systematic improvement in performance with system size, with the highest errors for two-qutrit systems and the lowest for five-qutrit systems. Notably, using only 12.5% of the measurements required for full state tomography is sufficient to reach 90th-percentile absolute errors of approximately 0.13-0.16 nats for both four- and five-qutrit systems. The CNN model is also robust to shot noise and generalizes well to out-of-distribution states. Overall, within the simulated settings studied here, our results indicate a transition in practical methods: VQAs are effective for small systems, while CNN-based estimators offer improved scalability and robustness for larger qutrit systems.

Sai Sakunthala Guddanti, Anil Prabhakar, Ria Rushin Joseph

Centre for Q. Info, Comm. and Computing, IIT Madras, Chennai 600036, India · Department of Electrical Engineering, IIT Madras, Chennai 600036, India · School of Information Technology, Deakin University, Burwood, Victoria 3125, Australia

Convolutional Neural Networks Variational Quantum Algorithms

Jun 18, 2026

eCNNTO: A Highly Generalizable ConvNet for Accelerating Topology Optimization

This work proposes an element-based Convolutional Neural Network (CNN) to accelerate density-based Topology Optimization (TO), termed eCNNTO. TO generally undergoes a large number of iterations, where finite element analysis is performed in every iteration, leading to the efficiency bottleneck especially when dense meshes are used to achieve high-resolution designs. To address this limitation, eCNNTO is proposed to build upon Kallioras et al. (2020), where a Deep Belief Network (DBN) was trained for every element to predict its near-optimal density from its early history, thereby skipping the great majority of iterations and significantly accelerating the TO procedure. However, the method lacks spatial correlations among neighboring elements and may lead to disconnected features in the final structure. The proposed method employs CNN with residual connections to address this issue. On top of it, a novel training strategy is introduced to further enhance the optimization efficiency, where the training dataset consists of the final stage density histories rather than early ones. This change can also help reduce the required training data size. eCNNTO requires only a small dataset to train and yet it can be generalized to problems with largely different boundary conditions, loading cases, design domain geometries, mesh resolutions, as well as non-design domains. In the end, the generalization capabilities and efficiency of eCNNTO are demonstrated through a variety of examples in two and three dimensions, achieving up to 90% and 97% reduction of iterations, respectively.

Shengbiao Lu, Xiaodong Wei

Global college, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240, Shanghai, China

Topology Optimization Deep Learning Optimization Convolutional Neural Networks