Land Cover Classification

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

Old-growth forests develop over centuries under minimal anthropogenic disturbance, producing structurally complex and biodiverse stands. In Europe, protecting them requires mapping that is accurate for individual forest parcels yet deployable continent-wide. Geospatial foundation model (GFM) embeddings enable label-scarce land classification, but their value for old-growth detection remains unknown. Here, we map old-growth forests across 211,893 ha of Romania's Southern Carpathians, a beech-spruce landscape typical of the Alpine Biogeographic Region. We construct high-confidence, expert-informed reference labels for old-growth and non-old-growth parcels. We add AlphaEarth, TESSERA v2 and Sentinel-1/2 features to a common baseline of topographic and human-access predictors, then compare them under spatially blocked validation with and without 10 km train-test buffers to limit residual autocorrelation. With buffering, GFM and Sentinel-1/2 predictors increase precision-recall AUC by 0.21-0.25 [95% CIs: 0.15-0.34] relative to baseline, indicating spectral data contain a spatially robust old-growth signal. With a PR-AUC of 0.84 [0.79-0.88], TESSERA outperforms Sentinel-1/2 (+0.08 [+0.05 to +0.11]) and AlphaEarth (+0.08 [+0.04 to +0.12]) under unbuffered spatial validation. At a 10 km buffer, however, this advantage narrows to +0.04 [-0.01 to +0.11] and +0.03 [-0.04 to +0.10], intervals consistent with no difference. At 10 m resolution, convolutional neural networks add no benefit over pixel-based XGBoost. Comparisons with four national- and continental-scale products show the importance of non-old-growth labels, and reveal 81% agreement between our predictions and a field-calibrated map. We conclude that buffered spatial validation is vital when transferring old-growth detection models to unseen landscapes, and provide our labels and predictions for future work.

High-resolution land use and land cover (LULC) products derived from Sentinel-2 imagery are widely used for environmental monitoring and land management, yet their performance can vary across regions with complex ecological gradients and heterogeneous surface conditions. In Quebec, these limitations motivated the development of a provincial 10-m land-cover product, the COTQ, designed to support annual monitoring of land occupation and soil artificialisation. This study presents a systematic evaluation of the COTQ product relative to three global 10-m LULC datasets: ESA WorldCover, ESRI LandCover, and Google DynamicWorld. This paper does not introduce a new mapping methodology but focuses on analysing the behaviour and consistency of the COTQ using complementary evaluation approaches. All products are harmonized under a common legend and compared using structural indicators (object-size distributions, shape complexity, Adjusted Rand Index, and Intersection over Union), spectral separability metrics derived from Sentinel-2 reflectance data, and a targeted photo-interpretation of disagreement areas. The analysis is conducted over eight Sentinel-2 tiles selected to represent the main bioclimatic domains of Québec, from temperate and boreal forests to northern tundra environments. The results show that the COTQ exhibits structural and spectral characteristics most similar to ESA WorldCover among the reference global products, while revealing systematic differences linked to class definitions and thematic priorities, particularly for urban areas, wetlands, and rocky or cryptogamic surfaces. This multi-criteria evaluation provides an objective characterization of the COTQ product and clarifies its relative positioning with respect to existing global land-cover datasets for operational land monitoring in Québec.

Geospatial foundation models provide reusable representations of satellite imagery that support downstream mapping with limited task-specific modelling. We evaluate whether annual AlphaEarth embeddings support binary cultivated-versus-non-cultivated mapping in Maine, USA, using 192 spatially separated patches and labels derived from the USDA Cropland Data Layer (CDL). Without fine-tuning the foundation model, a lightweight classifier reaches 93.7% overall accuracy and 90.8% balanced accuracy on held-out patches. Logistic regression is within 0.3 percentage points of a gradient-boosted ensemble, while a nearest-class-centroid rule, which uses class centroids but fits no parameters, reaches 90.2%. A balanced sample of 60,000 labelled pixels is within 1.3 percentage points of the full pool of 8.6 million pixels; because pixels are spatially autocorrelated, this result concerns pixel-sample efficiency rather than 60,000 independent annotation sites. In a same-region transfer experiment, classifiers trained in one year remain accurate across 2018 to 2023. Against a blind, two-interpreter consensus at 385 randomly sampled points in one contiguous 2023 block, the AlphaEarth-plus-random-forest map agrees at 95.3% ($κ=0.82$), compared with 91.7% for the CDL ($κ=0.72$; exact two-sided McNemar $p=0.0161$). This local result is consistent with partial smoothing of CDL label noise, but it does not establish statewide correction of the reference product. On the same points, the difference from a fine-tuned TerraMind segmentation model is not statistically significant (95.3% versus 93.5%; $p=0.14$), and the experiment is not a controlled comparison of computational cost. These results support frozen geospatial embeddings as a low-compute candidate for regional cropland mapping, subject to the limits of a single-state study, a 30 m-derived training reference, and a one-block human validation.

General-purpose vision-language models (VLMs) now support strong visual recognition, instruction following, and generation. However, most pretrained visual encoders are built around three-channel natural images and do not directly accommodate observations such as native multispectral measurements or synthetic aperture radar (SAR). Adapting VLMs to these sensors typically requires dedicated encoders and domain pretraining, slowing the reuse of stronger general-purpose checkpoints. We show that the multi-image interface of general-purpose VLMs offers a lightweight alternative. Our protocol renders each observation as five optical views and one SAR view, names them in the prompt, and adapts the language network and selected visual transformer blocks with LoRA. This exposes band composites, spectral indices, and radar backscatter through an existing visual interface. For land-cover recognition, structured supervision couples predicted classes with sensor evidence. We further construct preference pairs in which a true label is omitted while its supporting evidence is retained, encouraging complete predictions that remain consistent with the observations. On a balanced six-class land-cover benchmark derived from BigEarthNet-v2, the adapted Qwen3-VL reaches 0.8275 micro F1. The same input and adaptation protocol improves all four tested VLM architectures and transfers to Sen1Floods11 flood verification and BigEarthNet.txt captioning. Image removal and mismatch controls show that the adapted models use the supplied sensor observations. Together, these results demonstrate that VLMs can be repurposed for multispectral and SAR tasks through rendered inputs and compact LoRA adaptation, without training a new foundation model.

Timely urban-canopy information is essential for linking remote sensing with heat, mobility, and neighborhood planning. We developed an optical GeoAI workflow for Davis, California, using 2022 National Agriculture Imagery Program imagery (0.6 m RGB+NIR). DeepForest generated crown candidates; an NDVI threshold, non-maximum suppression, and box-prompted Segment Anything Model (ViT-B) produced a crown-anchored canopy surface. Analyses used the 25.92 km2 Census TIGER municipal boundary and a 100 m grid. The workflow retained 11,741 candidate crowns and mapped 7.71 km2 of canopy (29.8% of the city). On the identical extent, pixel precision was 0.804, pixel recall was 0.873, and 97.4% of candidate centers agreed with the 2022 USDA/CAL FIRE LiDAR-assisted canopy product (IoU 0.719; Dice 0.837; area recovery 108.5%). Approximately 49% of candidates occurred within 15 m of a road. Canopy was inversely associated with Landsat land-surface temperature (Spearman rho = -0.477; partial rho = -0.551 controlling for built probability), and spatial-lag modeling confirmed clear neighborhood structure. Two transparent attention surfaces combined canopy need with thermal and contextual indicators. The framework provides a reproducible, updateable screening layer that complements structural canopy products and municipal inventories while retaining assumptions, data provenance, and spatial diagnostics for planning interpretation.

Operational crop mapping requires models that generalise across years, resolve fine-grained crop taxonomies, and distinguish cropland from surrounding landscapes. However, existing crop mapping datasets enable evaluation of these requirements only in isolation. We therefore introduce SwissCrop25, a national-scale crop mapping benchmark dataset spanning seven growing seasons (2019-2025). SwissCrop25 combines Sentinel-2 time series, daily temperature observations, a fine-grained 73 crop taxonomy including grassland management types, and 5 explicit non-crop land cover classes. To evaluate realistic deployment conditions, we define a leave-one-year-out protocol with joint cropland delineation and crop classification for benchmarking representative crop mapping architectures. Evaluating U-TAE (convolutional temporal-attention model), TSViT (transformer-based spatio-temporal model), and Galileo (EO foundation model) reveals differences between architectures hidden by conventional benchmarks. In this setting, domain-specific models outperform Galileo, with TSViT achieving the best overall performance and a 12 pp macro-mIoU advantage over U-TAE. SwissCrop25 also exposes substantial interannual distribution shifts and shows that incorporating temperature-derived phenological information improves robustness. Finally, in-season evaluation reveals a trade-off between models, with U-TAE performing better early in the season and TSViT gaining an advantage later through improved rare-class discrimination. SwissCrop25 provides a challenging testbed for evaluating crop mapping systems under realistic operational conditions and is publicly released at https://huggingface.co/datasets/EOA-team/SwissCrop25 .

Machine learning, and deep networks in particular, are increasingly used to derive higher-level Earth observation (EO) products such as annual land-cover and crop-type maps. Many are generated operationally: each year a new acquisition is processed, typically with the same model, extending a multi-year archive. In the process these systems accumulate two kinds of useful signal that are almost never fed back into the model: the system's own archive of past predictions, and ancillary layers produced by other partners in a processing consortium. Both are normally used outside the network, as rule-based post-processing or a fixed input mask. Using the Copernicus Land Monitoring Service High Resolution Layer (HRL) Croplands crop-type product as a testbed, we show that bringing both signals inside the model turns a single-year, single-task pixel classifier into one that reasons across years. We introduce a Crop Type (CTY) embedding encoder that represents each past prediction as a confidence-scaled, time-ordered categorical token and attends over the year axis, and we study how the externally provided Base Vegetation Layer (BVL) mask should be represented in the model's inputs and outputs. To compare designs fairly when they relabel non-crop pixels, we evaluate on the 18 crop classes only and report precision and recall separately. On a pan-European dataset of about 5.4M labelled pixels, adding the prediction history raises crop-only F1 by 1.6 percentage points (pp) and, more importantly, corrects a recall-skewed error profile, with the largest gains on perennial and tree crops (olives +4.6, fruits +3.7, nuts +3.2 pp). Representing the BVL mask consistently in both the history and the target year adds about 2.5 pp on the crop classes. The approach is a low-cost recipe for any recurring geospatial or foundation model that emits class maps.

Earth observation is moving from foundation models that users must run themselves toward embedding products that package model feature outputs as reusable data without needing to download and process the imagery used to generate them. Earth embeddings are vectors that summarize locations, image patches, or pixels, letting users analyze compact features instead of repeatedly training or running large models on raw satellite imagery. This chapter explains the main types of Earth embeddings, from implicit location encoders to explicit patch and pixel products, and compares their coverage, resolution, dimensionality, storage cost, licenses, and reproducibility. We review their use in land cover and crop mapping, ecological and hazard modeling, socioeconomic prediction, and semantic search, with evidence on when embeddings improve on conventional features and when pooling, fusion, or spatial transfer limit performance. Two case studies show practical workflows for similarity search and land cover mapping. We close with guidance for choosing, evaluating, storing, compressing, and publishing embeddings, and with open problems in oceanic and atmospheric coverage, uncertainty, and benchmarking.

Indonesia's relocation of its political and administrative capital from Jakarta to Ibu Kota Nusantara (IKN) has been framed around a Forest City vision, yet rapid construction within the Core Government Area (KIPP) raises concerns over land conversion, vegetation loss, and carbon stock decline. This study applies remote sensing techniques to systematically assess land use and vegetation cover change in KIPP from 2021 to 2026 using PlanetScope SuperDove satellite imagery. Cloud-free mosaics were prepared and analysed through spectral indices, including the Normalised Difference Vegetation Index (NDVI), Normalised Difference Red Edge (NDRE), and Normalised Difference Water Index (NDWI), alongside supervised land use and land cover (LULC) classification using a Support Vector Machine algorithm. Results show substantial environmental transformation, with mean NDVI declined by 17.1%, total carbon stock decreased by 0.28%, developed land expanded by 672%, and total vegetation declined by 18.1%. Vegetation loss was most extensive between 2023 and 2024, although a temporary recovery in NDVI and carbon stock occurred from 2024 to 2025 as active clearing slowed and development shifted towards already-cleared land. Overall, the findings demonstrate that remote sensing provides an effective approach for monitoring the environmental impacts of large-scale urban development, while highlighting the need for higher-resolution, hyperspectral, and SAR-based methods to improve detection of construction stages and plantation-related land cover changes.

High-resolution satellite imagery is the backbone of good land-cover classification, and without that, environmental monitoring, urban planning, and sustainable resource management all fall short. Deep learning architectures perform well in semantic segmentation, but the efficiency-accuracy trade-off across classical convolutional encoders is not well quantified under controlled, reproducible conditions. This study compares five architectures VGG16, MobileNetV2, InceptionV3, AlexNet, and CNN on the DeepGlobe Land Cover Classification dataset using three progressively optimized iterations to isolate regularisation, transfer learning, and architectural depth. To ensure performance differentials reflect architectural properties, all experiments used identical preprocessing, hyperparameter, and training protocols without data augmentation or class-imbalance correction. At 24.98 MB, MobileNetV2_v1 had the highest overall accuracy (0.7906) and mean Intersection over Union (0.4625), outperforming deeper alternatives like InceptionV3_v2 (125.17 MB, accuracy 0.7610) and VGG16_v2 (71.13 MB, accuracy 0.7653). Class-wise analysis showed strength in urban, agricultural, and water categories, but rangeland-barren confusion showed that architectural optimization alone cannot optimize spectrally similar minority classes. Strong spatial generalization and crisp boundary delineation were confirmed on held-out test imagery, validating operational applicability. These results show that lightweight, transfer-learned models can match or outperform deeper models in resource-constrained remote-sensing environments, enabling scalable land-cover mapping.

We present HyperImageNet, a large-scale benchmark for fine-grained hyperspectral land-cover understanding. The dataset contains 26,084 airborne hyperspectral image patches with 224 spectral bands and 138 fine-grained land-cover categories. Unlike existing datasets, HyperImageNet provides raw imagery, pixel-level semantic labels, and object-level instance masks, supporting both semantic and instance segmentation. Furthermore, we establish an open-environment benchmark with strict spatial separation to evaluate representative methods and the HyperFree foundation model. Experimental results demonstrate the effectiveness of HyperImageNet for fine-grained hyperspectral understanding and open-environment remote sensing research.

Accurate mapping of informal settlements remains a major challenge in Sub-Saharan African (SSA) cities because optical imagery often fails to distinguish Informal Settlements (defined here as LCZ 7) from spectrally similar formal Compact Low-Rise areas (LCZ 3). This study presents a context-aware, reproducible Optical-SAR framework that improves informal settlement delineation using Sentinel-2 spectral features and Sentinel-1 structural information within an adapted Local Climate Zone (LCZ) taxonomy. We implement a three-tier SAR integration strategy: calibrated backscatter, GLCM textures, and a physics-guided feature engineered to capture the high structural disorder and weak radar return characteristic of SSA informal settlements. Using reference data across Nairobi and Eldoret (Kenya), we evaluate performance via a stratified hold-out protocol and a season-aware ablation study. Results show that SAR textures provide the dominant performance gain for LCZ 7 detection. The Optical-SAR model achieves overall accuracy of 0.816 (dry) and 0.807 (wet), significantly outperforming the WUDAPT baseline (OA 0.704) and reducing the critical LCZ 3 - LCZ 7 confusion to 7%. Seasonal analysis indicates that while optical-only separability varies with phenology, SAR-derived textures stabilize informal settlement mapping across seasons. These findings demonstrate that the incorporation of SAR-derived features yields consistent improvements for urban morphology mapping in data-scarce environments across seasons and across the evaluated source cities, while cross-city transfer remains limited without local adaptation strategies.

Earth observation imagery plays a critical role in environmental monitoring, urban planning, disaster assessment, and climate analysis. While multi-spectral sensors are increasingly available, true-color (RGB) imagery remains widely used due to the power, cost, and deployment constraints of many satellite and aerial platforms. However, existing land-cover segmentation datasets are often limited in geographic coverage, scale, or public accessibility. To bridge this gap, we introduce BELDE (Building a Large-scale Earth-observation Land-cover Dataset for Europe), a publicly available dataset tailored for RGB-based remote sensing semantic segmentation. Constructed from Sentinel-2 true-color images and ESA WorldCover data annotations, BELDE contains 1,088,385 curated image-segmentation map pairs spanning Europe with 7 land-cover classes at 10 m spatial resolution, making it one of the largest publicly available RGB land-cover segmentation datasets for Earth observation. To facilitate cross-region generalization studies, we additionally introduce BELDE-K (16,607 pairs) covering the Republic of Korea and BELDE-CA-NV (88,155 pairs) covering California and Nevada in the United States. We establish baseline results using multiple semantic segmentation architectures and evaluate both in-domain and cross-domain performance. Models trained on BELDE achieve an F1 score of 83.0% on the European test set, while performance decreases to 66.4% on BELDE-CA-NV and 58.3% on BELDE-K, highlighting the challenges posed by out-of-distribution geographic domain shift. By providing a continental-scale RGB segmentation and evaluation benchmark, BELDE supports the development of robust and transferable Earth observation models. The dataset and benchmark resources will be publicly released.

Accurate identification of Pinus sylvestris var. mongolica plantations is important for monitoring afforestation quality and ecological restoration in northern Shaanxi. This paper proposes ROSA-TFormer, a radar-optical sensor-aware temporal Transformer for P. sylvestris classification using Sentinel-1/2 time-series data generated on Google Earth Engine. The model integrates separate SAR and optical embedding branches, a sensor-aware gate, and temporal attention pooling to capture multi-source seasonal features. Experiments on monthly and half-month point-level datasets show that ROSA-TFormer achieves strong classification performance, with 99.67% overall accuracy, 99.56% macro F1, and 98.91% P. sylvestris F1 on the HalfMonth-dataBig dataset. Spatial block validation and ablation results further indicate the effectiveness of radar-optical temporal fusion and sensor-aware modeling. The results demonstrate the potential of ROSA-TFormer for point-level P. sylvestris plantation classification, while broader wall-to-wall validation remains necessary.

Optical remote sensing imagery is frequently degraded by cloud and cloud-shadow contamination, which limits its reliability for near-real-time land use and land cover (LULC) mapping. Although synthetic aperture radar (SAR) can provide cloud-penetrating structural information, existing SAR-optical fusion methods often assume reliable optical observations and insufficiently address the semantic uncertainty introduced by cloud contamination. To address this issue, we propose CloudLULC-Net, an end-to-end heterogeneous SAR-optical fusion framework that directly predicts LULC maps from cloud-contaminated Sentinel-2 imagery and temporally adjacent Sentinel-1 SAR observations. The proposed network incorporates optical reliability modulation to suppress unreliable optical responses, heterogeneous information adaptive aggregation to model high-order spatial-channel interactions between optical and SAR representations, and a unified semantic mapping transformer to organize fused features in a LULC-oriented latent space. A semantic anchor-guided optimization strategy is further introduced to improve the consistency of intermediate semantic representations. To support this task, we construct CloudLULC-Set, a large-scale benchmark dataset containing 40,223 curated SAR-optical-label triplets with pixel-level LULC annotations across diverse geographic regions and cloud conditions. Experimental results show that CloudLULC-Net achieves an OA of 86.60%, an F1-score of 83.29%, and an mIoU of 73.51%, outperforming representative heterogeneous reconstruction-first and end-to-end SAR-optical mapping methods. Comparisons with existing global LULC products and analyses under different cloud-cover levels further demonstrate the robustness and practical value of CloudLULC-Net for target-date LULC mapping in cloud-prone regions.The project is publicly available at: https://github.com/RSIIPAC/CloudLULC

Semantic segmentation of remote sensing imagery requires models that capture both global context and local detail under tight computational budgets. Prior work typically optimizes for one of these axes: attention for global context, convolution for local detail, or compactness for efficiency. While hybrid approaches aim to capture both, they require architectural changes and encoder backbones with computational overhead, limiting efficiency and performance. We present LALE (Lightweight-transformer Architecture for Land-cover Estimation), an end-to-end remote sensing image segmentation architecture, that bifurcates its encoder by resolution: lightweight ConvMixer stages handle high-resolution local features, while transformer stages handle low-resolution global context, confining the quadratic cost of self-attention to deep, downsampled feature maps. An all-MLP multi-scale decoder, together with RMSNorm and StarReLU throughout, further reduces compute and parameter count. On the large-scale ARAS400k remote-sensing segmentation benchmark, LALE establishes a strong efficiency-performance trade-off against CNN, transformer, and hybrid baselines. Our smallest variant, (just 1.6M parameters), reaches within 2.6 F1 points of the best baseline (UPerNet) while using 4.5x fewer parameters, 7x less storage, 17x fewer GMACs, and delivering 1.8x higher throughput. The codebase for LALE is publicly available at https://github.com/caglarmert/LALE.

Land Use Land Cover (LULC) classification is essential for national 3D mapping, geospatial analysis, and sustainable planning. Multispectral (MS) LiDAR provides synchronized spatial-spectral information, and deep learning (DL) enables 3D point cloud semantic segmentation; however, adoption is limited by the lack of publicly available urban and suburban MS LiDAR datasets aligned with National Mapping and Cadastral Agencies (NMCAs) classification schemes. This study addresses these gaps by introducing L1 and L2 NMCA-aligned LULC classification schemes and a new benchmark MS LiDAR dataset. We evaluate seven state-of-the-art DL models and perform spectral ablation studies at both levels of detail. Results show that Point Transformer V3 achieves the best performance, with mIoU of 79.4% (L1, 8 classes) and 58.9% (L2, 20 classes) using a dual-wavelength LiDAR system (532 nm and 1064 nm). Ablation results show that multispectral information improves performance over geometry-only inputs, with gains of 1.1 percentage points at L1 and 7.8 points at L2. These results highlight the value of LiDAR reflectance for fine-grained material discrimination and support the evolution of NMCA LULC schemes toward higher semantic detail. The Loosdorf-MSL dataset contributes a new benchmark for consistent national and international LULC mapping.

Developing robust techniques for super-resolution of satellite imagery involves navigating commonly observed trade-offs between spectral fidelity and perceptual quality. In this work, we introduce a flow matching model for 4x super-resolution of 10-m Sentinel-2 visible and near-infrared bands over the conterminous United States (CONUS) using a dataset of 120,851 10-m Sentinel-2 and 2.5-m resampled NAIP imagery pairs acquired on the same day. Our results showed that the flow matching model outperformed diffusion and Real-ESRGAN models in pixel-wise accuracy in a single sampling step using the Euler method. When evaluated with a second-order Midpoint solver, our model generated perceptually realistic super-resolved imagery in only 20 sampling steps, effectively navigating the perception-distortion trade-off at inference time without retraining. We used this model to produce a super-resolved 2.5-m 4-band CONUS imagery product derived from 2025 10-m Sentinel-2 annual composites, consisting of over 1.58 trillion pixels. We further evaluated the use of super-resolved data on a land cover classification task using semantic segmentation models. Finally, we generated a yearly 2.5-m land cover product for the Chesapeake Bay watershed for 2020-2025. An accuracy assessment against 25,000 ground truth points revealed an overall accuracy of 89.11% for the annual land cover product. We conclude that flow matching is an effective generative modeling approach for super-resolution of Sentinel-2 imagery compared to diffusion and Generative Adversarial Network-based methods, and has strong implications for expanding access to high-resolution imagery for geospatial applications that demand fine spatial detail.

We investigate variational quantum classifiers (VQCs) for land-cover classification from multispectral satellite imagery, adopting a feature-map perspective in which the quantum circuit defines a nonlinear data embedding while the readout determines how this representation is exploited. Using the EuroSAT-MS dataset, we perform a systematic one-vs-one evaluation across all class pairs under a controlled experimental protocol, comparing classical baselines (logistic regression, SVMs, neural networks) with VQCs employing both linear readout and quantum-kernel SVM strategies. Our results show that, while VQCs with linear readout do not outperform strong classical baselines such as RBF-SVM, the same trained quantum feature map can significantly improve performance when reused within a kernel-based decision framework. A qubit-count sweep further reveals saturation effects consistent with the mismatch between exponential Hilbert space dimension and linear parameter scaling. Overall, our findings highlight that the effectiveness of quantum models depends critically on the interplay between representation and readout, and that meaningful gains may arise from combining learned quantum feature maps with classical decision mechanisms rather than seeking direct replacement of classical models.

High-resolution (HR) land-cover mapping is often constrained by the high cost of dense HR annotations. We revisit this problem from the perspective of map super-resolution, which enhances coarse low-resolution (LR) land-cover products into HR maps at the resolution of the input imagery. Existing weakly supervised methods can leverage LR labels, but they typically use them to retrain dense predictors with substantial computational cost. We propose MapSR, a prompt-driven framework that decouples supervision from model training. MapSR uses LR labels once to extract class prompts from frozen vision foundation model features through a lightweight linear probe, after which HR mapping proceeds via training-free metric inference and graph-based prediction refinement. Specifically, class prompts are estimated by aggregating high-confidence HR features identified by the linear probe, and HR predictions are obtained by cosine-similarity matching followed by graph-based propagation for spatial refinement. Experiments on the Chesapeake Bay dataset show that MapSR achieves 59.64% mIoU without any HR labels, remaining competitive with the strongest weakly supervised baseline and surpassing a fully supervised baseline. Notably, MapSR reduces trainable parameters by four orders of magnitude and shortens training time from hours to minutes, enabling scalable HR mapping under limited annotation and compute budgets. The code is available at https://github.com/rikirikirikiriki/MapSR.

This work proposes MeCSAFNet, a multi-branch encoder-decoder architecture for land cover segmentation in multispectral imagery. The model separately processes visible and non-visible channels through dual ConvNeXt encoders, followed by individual decoders that reconstruct spatial information. A dedicated fusion decoder integrates intermediate features at multiple scales, combining fine spatial cues with high-level spectral representations. The feature fusion is further enhanced with CBAM attention, and the ASAU activation function contributes to stable and efficient optimization. The model is designed to process different spectral configurations, including a 4-channel (4c) input combining RGB and NIR bands, as well as a 6-channel (6c) input incorporating NDVI and NDWI indices. Experiments on the Five-Billion-Pixels (FBP) and Potsdam datasets demonstrate significant performance gains. On FBP, MeCSAFNet-base (6c) surpasses U-Net (4c) by +19.21%, U-Net (6c) by +14.72%, SegFormer (4c) by +19.62%, and SegFormer (6c) by +14.74% in mIoU. On Potsdam, MeCSAFNet-large (4c) improves over DeepLabV3+ (4c) by +6.48%, DeepLabV3+ (6c) by +5.85%, SegFormer (4c) by +9.11%, and SegFormer (6c) by +4.80% in mIoU. The model also achieves consistent gains over several recent state-of-the-art approaches. Moreover, compact variants of MeCSAFNet deliver notable performance with lower training time and reduced inference cost, supporting their deployment in resource-constrained environments. Model code is available at: https://github.com/Leo-Thomas/mecsafnet

Trees Outside Forests (TOF) play an important role in agricultural landscapes by supporting biodiversity, sequestering carbon, and regulating microclimates. Yet, most studies have treated TOF as a single class or relied on rigid rule-based thresholds, limiting ecological interpretation and adaptability across regions. To address this, we evaluate deep learning for TOF classification using a newly generated dataset and high-resolution aerial imagery from four agricultural landscapes in Germany. Specifically, we compare convolutional neural networks (CNNs), vision transformers, and hybrid CNN-transformer models across six semantic segmentation architectures (ABCNet, LSKNet, FT-UNetFormer, DC-Swin, BANet, and U-Net) to map four categories of woody vegetation: Forest, Patch, Linear, and Tree, derived from previous studies and governmental products. Overall, the models achieved good classification accuracy across the four landscapes, with the FT-UNetFormer performing best (mean Intersection-over-Union 0.74; mean F1 score 0.84), underscoring the importance of spatial context understanding in TOF mapping and classification. Our results show good results for Forest and Linear class and reveal challenges particularly in classifying complex structures with high edge density, notably the Patch and Tree class. Our generalization experiments highlight the need for regionally diverse training data to ensure reliable large-scale mapping. The dataset and code are openly available at https://github.com/Moerizzy/TOFMapper