LiDAR Place Recognition

LiDAR place recognition is a key front end for loop closure and global relocalization, yet indoor retrieval remains difficult when attitude or sensor mounting height changes between mapping and query sessions. Scan Context stores the maximum height in each polar cell; indoors, broad ceilings can suppress the lower and mid-level geometry that distinguishes adjacent rooms and corridors. We present UpDown-SC, a training-free polar descriptor that first canonicalizes gravity and then represents two complementary surfaces: the upper envelope of lower/middle structures and the lower envelope of overhead structures. Their physical split is estimated once from a cell-balanced map height distribution and reused by every query. A mask-aware, non-uniform two-channel distance retains discriminative lower-level evidence while limiting sensitivity to its cross-session variation, without treating unobserved cells as zero-height measurements. Conventional Scan Context shortlisting and circular yaw alignment are retained, so retrieved hypotheses directly initialize geometric verification. Experiments across repeated indoor sessions, mounting-height changes, mixed outdoor-to-indoor trajectories, and an outdoor transfer sequence show more reliable first-choice retrieval on the indoor and mounting-height-varied sessions. A paired test finds a significant gain over Scan Context on the in-house sessions. UpDown-SC also gives the best or second-best F1max and AUPR under threshold-based acceptance while retaining a lightweight CPU front end. Continuous replay confirms that the retrieved hypotheses support metric prior-map localization. Code and evaluation artifacts: https://github.com/jiejie567/updown-sc.

We present DXPR, a depth-based cross-modal place recognition (CMPR) framework that uses vision foundation models (VFMs) to match monocular camera queries against a LiDAR map without modality-specific encoders. This enables robots and autonomous vehicles to robustly localize using only cameras within pre-built LiDAR maps, even under severe seasonal, weather, and illumination changes. The key idea is to convert both camera images and LiDAR scans into a unified depth image representation so that a single VFM backbone with an aggregation head can learn modality-invariant global descriptors. To make pairwise metric learning faithful to scene geometry, we introduce a geometry-aware overlap miner: after cross-modal scale alignment of camera and LiDAR depth, we forward-warp measurements between views to compute a pixel-level overlap score. This score relabels ambiguous pairs and adaptively modulates the positive margin in a multi-similarity loss to avoid overfitting on weakly overlapping views. Extensive experiments on KITTI odometry and Boreas demonstrate strong performance and robustness across seasons, weather, and day/night. On KITTI, DXPR achieves near-perfect Recall@1 on most sequences and outperforms prior CMPR baselines. On Boreas, DXPR achieves intra-sequence performance on par with a strong single-modal baseline (DINOv2-SALAD), while showing clear improvements in the more challenging inter-sequence setting. Compared with RangeBEV, our method consistently performs better in both intra- and inter-sequence evaluations, demonstrating robustness under diverse seasonal and illumination changes.

Cross-modal place recognition (CMPR) aims to identify the same location across heterogeneous sensing modalities, such as vision and LiDAR. Existing methods commonly bridge the modality gap using complex alignment modules, multi-stage training, or full fine-tuning of pretrained backbones. In this work, we revisit CMPR from the perspective of geometric consistency and propose GeoUniPR, a unified and concise geometry-consistent framework. GeoUniPR reduces cross-modal discrepancy at the representation level by projecting LiDAR point clouds into the camera perspective to construct Geometry-Consistent depth image views (DIV), which establish direct RGB-LiDAR correspondence. We further augment DIV with native LiDAR cues, including intensity and surface-normal information, yielding a multi-channel geometric representation that improves structural consistency. Based on this representation, GeoUniPR learns a unified embedding space using two modality-specific ViT-based encoders with identical architectures, trained through parameter-efficient adaptation without auxiliary alignment modules, multi-stage training, or full backbone fine-tuning. In addition, we introduce Spatially-Consistent InfoNCE (SC-InfoNCE), a CMPR-specific contrastive objective that suppresses distance-induced false negatives under spatial continuity. Extensive experiments on KITTI and KITTI-360 demonstrate that GeoUniPR achieves state-of-the-art (SOTA) performance in both same-modal and cross-modal place recognition, with strong cross-dataset generalization.

LiDAR place recognition supports loop closure, relocalization, and multi-agent map management. As robotic platforms increasingly combine LiDARs with different fields of view, resolutions, and scanning patterns, existing descriptors degrade because they are tightly coupled to sensor-specific characteristics. We present InLiER, a learning-free pipeline based on an intermediate tokenization step. Height-sliced keypoints from structural elements receive mixed-radix token IDs encoding height, radial distance, local shape, and azimuth from local 3D geometry, in a compact sub-2KB representation. The same vocabulary is reorganized across three retrieval stages: height-ceiling histogram intersection for fast rotation-invariant shortlisting, binary bitmask alignment for yaw estimation and reranking, and token-guided geometric verification for 6-DoF pose estimation. InLiER achieves state-of-the-art performance on the HeLiPR dataset and in real-world field experiments, among modern handcrafted methods and outperforms the learning-based baseline on most cross-sensor configurations.

Under field-of-view (FOV) mismatch, pooling LiDAR features over unequal angular support can distort compact retrieval keys and exclude correct matches before geometric verification. We present PROBE-X, a learning-free method for single-scan cross-FOV place recognition. Building on PROBE's probabilistic occupancy representation, which models translation uncertainty, PROBE-X constructs ring-mean retrieval keys using angular masks conditioned on up to four fixed hypotheses for the unknown relative heading. Candidate lists are merged by maximum cosine similarity. Each retained candidate is aligned under the hypotheses that retrieved it and assigned a geometric score over the angular overlap at the refined heading. Across controlled-FOV and heterogeneous-LiDAR experiments, PROBE-X achieves higher Recall@1 and PR-AUC than the evaluated single-scan baselines in most settings with limited-FOV queries and panoramic database scans. On the controlled asymmetric-FOV sweep, single-scan PROBE-X also outperforms the baselines evaluated with up to ten accumulated scans on both metrics. In two ablation settings, removing the angular masks from retrieval-key construction reduces candidate coverage and Recall@1, even when alignment and scoring still account for angular support. Project page: https://sites.google.com/view/probex-pr

Loop closure is essential to reduce drift and build globally consistent maps in large-scale environments. However, reliable loop closure with only geometric information from, e.g., a LiDAR sensor, remains challenging due to the difficulty of constructing discriminative geometric features. We present PinNet, a neural network that produces local geometric descriptors from point clouds for place recognition and scanto-scan registration. PinNet incorporates a neural network that generates keypoints and their corresponding descriptors, together with a plane-based geometric self-attention module that models inter-keypoint spatial relationships to enhance descriptor discriminability for loop-closure detection and point-cloud registration. The approach is comprehensively evaluated on multiple datasets collected with different LiDAR sensors. Experimental results demonstrate strong place-recognition performance, precise relative pose estimation, and successful single-shot localization in different environments.

LiDAR place recognition determines one's position on a prior point cloud map. The most studied ground-level LiDAR place recognition suffers from pre-visit requirements, incomplete coverage, and limited perspectives. Using pre-acquired, full-coverage Airborne Laser Scanning (ALS) data as an aerial prior map overcomes these drawbacks, making cross-view place recognition necessary and advantageous. However, aerial-ground LiDAR place recognition faces significant challenges, including the domain gap between aerial and ground point clouds, and false positives during initial retrieval. To address these challenges, we present a novel retrieval and re-ranking framework for aerial-ground LiDAR place recognition. Based on the priors that neighboring point cloud patches share similar semantics with anchor patch, our retrieval network introduces patch-level self-supervised learning modules at multiple scales and integrates with scene-level learning to improve global feature discriminativeness between aerial and ground point clouds. Furthermore, leveraging the structured spatial distribution of ALS point clouds, we introduce an Expanded Reciprocal (ER) re-ranking algorithm to exploit neighborhood information maximally and refine each feature based on neighbor features, which are then used to update the similarity matrix for final ranking. Extensive experiments demonstrate that our retrieval network outperforms existing state-of-the-art (SOTA) methods, achieving a 9.8% improvement in average Recall@1 and a 3.2% improvement in average Recall@1% on the CS-Urban-Scenes, while also showing the best performance on the CS-Campus3D dataset. Additionally, our ER re-ranking algorithm further boosts the average Recall@1 by 4.9% on CS-Campus3D and 10.2% on CS-Urban-Scenes without additional training.

Cross-modal place recognition (CMPR) enables camera-only robots to localize against pre-built LiDAR maps in autonomous navigation scenarios. This image-to-point-cloud setting is challenged by two coupled ambiguities: the modality gap between perspective RGB appearance and sparse metric geometry, and perceptual aliasing among urban places with similar roads, facades, intersections, and object arrangements. Instead of treating CMPR as a single global descriptor matching problem, we argue that reliable retrieval requires both geometry-aware representation alignment and fine-grained candidate verification. In this paper, we propose G2IA, a geometry-guided instance-aware framework for image-to-point-cloud place recognition. In the retrieval stage, visual geometry priors from VGGT and instance features are integrated to construct place descriptors that are more compatible with LiDAR-derived map representations. In the refinement stage, the retrieved candidates are re-ranked by explicitly verifying whether local instance shapes and their relative spatial layouts are consistent across modalities. Experiments on public benchmarks demonstrate that G2IA consistently improves image-to-point-cloud place recognition under different localization thresholds, and exhibits strong cross-dataset generalization.

Robust localization in unstructured environments, such as agricultural fields, is a critical challenge for autonomous systems. LiDAR sensors provide detailed 3D information about the environment and are invariant to lighting conditions. For this reason, LiDAR-based place recognition methods have gained significant attention. In this paper, we propose MinkUNeXt-VINE++, a novel approach that combines early fusion of heterogeneous LiDAR data from two sensors (Livox Mid-360 and Velodyne VLP-16) and a learned re-ranking strategy in inference time. This fusion leverages the strengths of each sensor to provide a more comprehensive representation of the environment. Additionally, the re-ranking approach is particularly important in repetitive environments, such as vineyards, as finding true positives is a major challenge. We evaluated our approach using the TEMPO-VINE dataset, which provides heterogeneous LiDAR data in vineyard environments across different phenological stages. Our results demonstrate that MinkUNeXt-VINE++ significantly improves place recognition performance compared to single-sensor approaches and state-of-the-art methods. MinkUNeXt-VINE++ achieves a 20% improvement in the Recall@1 metric compared to single-sensor approaches, and +30% including re-ranking. The code of our method is publicly available for reproduction.

Place recognition is essential for long-term autonomous navigation, enabling loop closure and consistent mapping. Although deep learning has improved performance, deploying such models on resource-constrained platforms remains challenging. This work explores efficient LiDAR-based place recognition for EdgeAI by leveraging Bird's Eye View representations to enable lightweight image-based networks. We benchmark representative architectures without aggregation heads using a unified descriptor scheme based on global pooling and linear projection, and evaluate performance under FP32, FP16, and INT8 quantization. Experiments reveal trade-offs between accuracy, robustness, and efficiency: FP16 matches FP32 with lower cost, while INT8 introduces architecture-dependent degradation. Overall, the presented results are a strong basis for future research on 'use-case'-aware quantisation of Neural Networks for Edge deployment.

We present PROBE (PRobabilistic Occupancy BEV Encoding), a learning-free LiDAR place recognition descriptor that models each BEV cell's occupancy as a Bernoulli random variable. Rather than relying on discrete point-cloud perturbations, PROBE analytically marginalizes over continuous Cartesian translations via the polar Jacobian, yielding a distance-adaptive angular uncertainty $σ_θ= σ_t / r$ in $\mathcal{O}(R{\cdot}S)$ time. The primary parameter $σ_t$ represents the expected translational uncertainty in meters, a sensor-independent physical quantity that enhances cross-sensor generalization while reducing the need for extensive per-dataset tuning. Pairwise similarity combines a Bernoulli-KL Jaccard with exponential uncertainty gating and FFT-based height cosine similarity for rotation alignment. Evaluated on four datasets spanning four diverse LiDAR types, PROBE achieves the highest accuracy among handcrafted descriptors in multi-session evaluation and competitive single-session performance relative to both handcrafted and supervised baselines. The source code and supplementary materials are available at https://sites.google.com/view/probe-pr.