Model Predictive Control

Also known as MPC

Overview

Model Predictive Control (MPC) predicts how a system will evolve, optimizes a sequence of actions over a finite horizon, applies the first action, and replans as measurements arrive. Work spans linear and nonlinear optimization, sampling-based methods such as MPPI, and learned dynamics from Gaussian processes, Koopman models, and neural world models; these methods are used in robotics, autonomous vehicles, energy systems, and process control. Robust and stochastic MPC, control barrier functions, reachability, and distributed optimization address uncertainty, safety, and coordination, while GPU and embedded solvers aim to meet real-time limits. A central tension is that longer, richer predictions can improve planning but increase computation and sensitivity to model error, so practical controllers must balance performance, safety guarantees, and reliable execution.

Latest papers

336 papers30 papers in the last four weeks, down 32% on the four weeks before. 0.2% of all new papers.

May 16, 2025

Bracing for Impact: Robust Humanoid Push Recovery and Locomotion with Reduced Order Models

Push recovery during locomotion will facilitate the deployment of humanoid robots in human-centered environments. In this paper, we present a unified framework for walking control and push recovery for humanoid robots, leveraging the arms for push recovery while dynamically walking. The key innovation is to use the environment, such as walls, to facilitate push recovery by combining Single Rigid Body model predictive control (SRB-MPC) with Hybrid Linear Inverted Pendulum (HLIP) dynamics to enable robust locomotion, push detection, and recovery by utilizing the robot's arms to brace against such walls and dynamically adjusting the desired contact forces and stepping patterns. Extensive simulation results on a humanoid robot demonstrate improved perturbation rejection and tracking performance compared to HLIP alone, with the robot able to recover from pushes up to 100N for 0.2s while walking at commanded speeds up to 0.5m/s. Robustness is further validated in scenarios with angled walls and multi-directional pushes.
May 8, 2025

A Tactile-Informed Bi-Level Framework with Complementary Motion-Contact Planning and Tracking for Robust Model-Based In-Hand Manipulation

In dexterous in-hand manipulation, learning-based methods achieve strong task performance with increasing generalization to unseen objects. A complementary advantage of model-based methods, central to this work, is online adaptation to new task specifications without policy retraining, given suitable system models. However, due to the complexity of physical contacts and limited sensing modalities, existing model-based methods still struggle with modeling errors, even when using advanced contact models or optimization schemes, which limit their real-world applications. To advance the effectiveness and robustness of model-based contact-rich in-hand manipulation, this paper proposes a novel bi-level framework with tactile incorporation to mitigate these limitations. Specifically, at the high level, reference finger motions and contacts are jointly generated via contact-implicit model predictive control. The high-level module enables online reactive planning and disturbance recovery. At the low level, these references are concurrently tracked through a hand force-motion model and tactile feedback. The low-level module compensates for modeling errors and enhances manipulation robustness. The complementarity between the two levels is manifested in two dimensions: 1) subsystem decomposition, with a slow optimization-based planning layer and a fast tactile-reactive control layer; and 2) functional decomposition, combining task-level optimality with contact-level stability. Extensive experiments demonstrate that our approach outperforms existing model-based methods in accuracy and robustness, while supporting online replanning during execution. Our method successfully completes a diverse set of challenging tasks in real-world environments, even under appreciable external disturbances and modeling uncertainties.
May 2, 2025

Differentiable Nonlinear Model Predictive Control

The efficient computation of parametric solution sensitivities is a key challenge in the integration of learning-enhanced methods with nonlinear model predictive control, as their availability is crucial for many learning algorithms. This paper discusses the computation of solution sensitivities of general nonlinear programs using the implicit function theorem and smoothed optimality conditions treated in interior-point methods (IPM). We introduce sequential barrier quadratic programming (SBQP), which generalizes SQP with an IPM quadratic programming (QP) solver by allowing the barrier parameter to approach a prescribed nonnegative target value, recovering classical SQP when this target is zero. Previous works are limited to convex or unconstrained formulations, or lack an implementation for efficient sensitivity evaluation. The publication is accompanied by an efficient open-source implementation within the acados framework, providing both forward and adjoint sensitivities for general optimal control problems, achieving speedups exceeding 3x over the state-of-the-art solvers mpc.pytorch and cvxpygen.
Nov 6, 2024

Observability-Aware Control for Quadrotor Formation Flight with Range-only Measurement

Cooperative Localization is a promising approach to achieving safe quadrotor formation flight through precise positioning via low-cost inter-drone sensors. This paper develops an observability-aware control principle tailored to quadrotor formation flight with range-only inter-drone measurements. The control principle is based on a novel approximation of the local observability Gramian (LOG), which we name the Short-Term Local Observability Gramian (STLOG). The validity of STLOG is established by proving its link to directional estimation precision in nonlinear systems. We propose the Observability Predictive Controller (OPC), a receding-horizon controller that generates optimal inputs to enhance information gain in weakly observable state directions by maximizing the minimum eigenvalue of the STLOG. This reduces the risk of estimator divergence due to the unbounded growth of uncertainty in weakly observed state components. Monte Carlo simulations and flight experiments are conducted with quadrotors in a GNSS-denied ferrying mission, showing that the OPC improves positioning confidence and estimator robustness.
Sep 11, 2024

MPPI-Generic: A CUDA Library for Stochastic Trajectory Optimization

This paper introduces a new C++/CUDA library for GPU-accelerated stochastic optimization called MPPI-Generic. It provides implementations of Model Predictive Path Integral control, Tube-Model Predictive Path Integral Control, and Robust Model Predictive Path Integral Control, and allows for these algorithms to be used across many pre-existing dynamics models and cost functions. Furthermore, researchers can create their own dynamics models or cost functions following our API definitions without needing to change the actual Model Predictive Path Integral Control code. Finally, we compare computational performance to other popular implementations of Model Predictive Path Integral Control over a variety of GPUs to show the real-time capabilities our library can allow for. Library code can be found at: https://acdslab.github.io/mppi-generic-website/ .
Apr 2, 2024

A Tutorial on Gaussian Process Learning-based Model Predictive Control

This tutorial provides an accessible and implementation-oriented introduction to Gaussian process learning-based model predictive control (GP-MPC), which combines probabilistic residual modeling with receding-horizon control. Its central tutorial contribution is a detailed, step-by-step derivation of multi-step mean and covariance propagation for GP-augmented prediction models. The derivation shows how commonly used propagation formulas follow from the laws of total expectation and total covariance, and clarifies the roles of the GP posterior mean, GP posterior covariance, uncertain inputs, and query-output cross-covariances. Building on this foundation, the article distinguishes mean-only unconstrained GP predictive control from uncertainty-aware constrained GP-MPC, clarifies regulation and output-tracking formulations, and provides concise implementation and computational-complexity guidance, including practical software-tool references and discussion of the scope of closed-loop guarantees. Mobile-robot path-following examples illustrate mean-only unconstrained implementations, whereas mixed-vehicle platooning illustrates uncertainty-aware constrained GP-MPC with uncertainty-dependent safety-distance tightening. The tutorial is intended to help researchers and practitioners understand, implement, and critically evaluate GP-MPC designs for robotic and autonomous systems operating under modeling uncertainty.