Online Continual Learning
Momentum
12 papers in the last four weeks, against 1 the four weeks before. 0.1% of all new papers.
Latest papers 46
Large language models (LLMs) and vision-language models (VLMs) are usually frozen after deployment, so they do not learn from the cases they solve. This is especially concerning in medicine, where new clinical evidence, updated guidelines, and new therapies can change established practice. Fine-tuning can update the model, but it requires access to model weights and additional training. Parameter-free methods avoid training, but they may overfit a fixed validation set, lack reliable domain knowledge, or lose visual details by saving experience only as text. To address these limitations, we present a model-agnostic framework that allows frozen LLMs and VLMs to learn from deployment experience through three forms of external expertise: a Skill that guides reasoning and tool use, a Knowledge Memory that stores reliable facts supported by earlier cases or trusted external evidence, and a Multimodal Knowledge Base that keeps visual examples and guides the model to relate each retrieved case to the current image. Instead of relying on a fixed validation set, a validation strategy keeps an update only if it helps on new cases without degrading performance on earlier ones. Across six benchmarks covering clinical diagnosis, clinical workflows, medical reasoning, and medical and non-medical visual reasoning, and with four open-weight and closed-source base models, our framework improves performance during online deployment by up to 34.2% over the base model on medical tasks, generalizes to unseen cases, transfers to other models without further optimization, and works in non-medical domains.
Benchmarking Label-Revealed Online Updates for EEG BCI Decoding
Electroencephalography (EEG) signals drift over time, which can cause static brain-computer interface (BCI) models to degrade in practice. We present a benchmark for online adaptation and compare two widely used pipeline families, Common Spatial Patterns (CSP) and Riemannian covariance-based methods, under time-ordered prequential (test-then-train) evaluation. We examine (i) which pipelines benefit most from label-revealed updates, (ii) whether controlled forgetting of older data improves robustness, and (iii) how a minimal-calibration cold start compares with starting from a pretrained model. Across four datasets (three motor-imagery datasets and one movement-decoding dataset), label-revealed online updates improve 13 of 14 model/dataset pairs on the two largest streams, with relative accuracy gains of up to about 18% over a frozen model. A Shapley-based data-valuation analysis over temporal blocks assigns the largest mean value to the most recent block in each of the three analyzed datasets, while older blocks retain positive value.
LiLib: Lifelong Air-to-Ground Path-Loss Prediction on UAVs via a Drift-Triggered Model Library
UAVs that act as relays or base stations need accurate air-to-ground path-loss predictions for rate adaptation and placement, but propagation conditions change as a UAV moves between suburban, urban and high-rise areas, and the same areas are often revisited. Online regressors that adapt by forgetting must relearn each environment from scratch, whereas a single model trained on all data averages incompatible regimes. We propose LiLib, a lightweight continual-learning scheme in which a UAV maintains a small library of recursive-least-squares experts. A windowed residual test detects drift; a short probe phase then either reuses the best stored expert or creates a new one. In simulations based on four standard urbanization profiles, LiLib reduces prediction RMSE from 5.89 dB (best sliding-window baseline) to 4.03 dB (p < 0.001), lowers the error shortly after a return to a known environment from 12.3 dB to 5.7 dB, and recovers 99% of the throughput of a regime-aware oracle in rate adaptation. The library stores four experts in under 0.5 KB, and identifies regimes with 92% purity without labels. When a second UAV is initialized with the library of a peer, its error after environment changes halves. LiLib does not reach the oracle, and similar regimes may be merged when shadowing is strong. The results indicate that, for recurring drift, remembering is more effective than re-adapting.
Task Vector Descent: Learning from Non-IID Batches
A central challenge in continual learning is to acquire new knowledge without forgetting what the model has already learned. This challenge appears in language model training when training data comes from various domain-, user-, or task-specific distributions that are encountered unevenly over time. In such settings, successive minibatches are temporally clustered by distribution instead of being sampled i.i.d. from the overall data mixture. Training on temporally clustered data induces a stability-plasticity tradeoff. Adapting the model to the active distribution can improve the model on the active distribution but may lead to a performance degradation on data it previously trained on. We find that this tradeoff intensifies with longer exposure to the same distribution. We therefore ask if the parameter displacement produced by such a sequence (the task vector) should be fully retained or applied partially. We compare applying the full displacement () with partial integration, which scales the task vector by before applying it to the continuing model and scales the optimizer state by the same coefficient. Across continual pretraining, pretraining from random initialization, supervised post-training, and reinforcement post-training, we find that intermediate values of often improve average continuing-model performance relative to full integration, particularly after longer same-distribution sequences. In continual-pretraining experiments with both controlled streams and naturally defined adaptation sequences, task-vector scaling outperforms full integration at the matched learning rate, showing that its benefits are not reproduced by learning-rate scaling alone.
Continual Learning for 6-DoF Grasp Synthesis via Experience and Demonstrations
Most current grasp synthesis systems are trained offline and remain fixed during deployment. While this works well when deployment conditions resemble the training data, performance can degrade when robots encounter conditions they have not seen before, such as unfamiliar objects. In this work, we present a continual-learning framework for single-view 6-DoF grasp synthesis for a parallel-jaw gripper in cluttered scenes. Rather than finetuning a large parametric model, our method adapts through memory in a learned embedding space: grasp outcomes update future grasp scores, while optional user demonstrations are recalled and transferred to new scenes as additional candidate grasps. We evaluate our method in simulation and in extensive real-world experiments comprising over 1500 grasp trials. We show that our method matches the performance of existing 6-DoF grasping baselines even before adaptation, improves online on unseen objects from categories absent or underrepresented during training, and supports long-horizon continual learning with limited forgetting. In real-world experiments, our method reaches over 90% success rates on several challenging object categories after only 50 online grasp attempts. Videos and code at https://giuschio.github.io/cl_grasping/.
A Dynamical Theory of LoRA in Continual Learning
Despite the widespread use of Low-Rank Adaptation (LoRA), little is known about its dynamics in continual learning and the mechanisms by which low-rank updates affect catastrophic forgetting. We provide an asymptotically exact dynamical characterization of LoRA in a solvable two-task teacher-student model. In the high-dimensional online-learning limit, we derive a closed system of ordinary differential equations for a finite set of macroscopic order parameters, yielding exact expressions for the generalization errors throughout both the initial Task 1 learning phase and the subsequent LoRA fine-tuning on Task 2. The theory quantitatively matches finite-dimensional simulations and exposes two characteristic effects of LoRA: low-rank adaptation reduces interference with features learned on the first task, but its initialization slows adaptation to the second task. Building on this mechanistic picture, we analyze a state-dependent masking strategy that freezes hidden units carrying the strongest first-task representations and restricts adaptation to the complementary subspace. This structural partitioning markedly reduces forgetting, while preserving plasticity on the new task. Our framework further clarifies the role of adapter rank: transfer improves only up to the intrinsic dimensionality of the target task and saturates beyond it, while forgetting continues to grow with rank. These results provide a dynamical and geometric account of how low-rank adaptation organizes information across sequential tasks and are qualitatively reproduced on a sequential MNIST benchmark.
HiTS-CL: A Continual Learning Framework for Long-Horizon Temporal Knowledge Graph Extrapolation
Extrapolative temporal knowledge graph reasoning (TKGR) predicts future facts from historical snapshots. Most existing methods train once on an early prefix of the timeline and then use a frozen model for all future timestamps. We argue that this fixed-prefix protocol is misaligned with extrapolation. It learns from a static prefix, whereas the target stream is non-stationary: new entities and facts emerge, temporal dependencies shift across regimes, and recurring historical signals must be refreshed online. As a result, models trained only on early snapshots become outdated and degrade over long horizons. We address this mismatch by formulating extrapolative TKGR as continual learning over streaming snapshots. Under this view, effective extrapolation must jointly handle current dynamics, stable knowledge, and recurring historical evidence. Based on these requirements, we propose History-enhanced Two-Step Continual Learning (HiTS-CL), a backbone-agnostic continual learning framework for extrapolative TKGR. HiTS-CL tracks current dynamics via continual fine-tuning, preserves stable knowledge via multi-teacher adaptive distillation, and retains recurring historical evidence via a selective memory of recent and frequent facts. We integrate HiTS-CL into five representative TKGR backbones and evaluate it on four benchmark datasets. HiTS-CL consistently improves extrapolation accuracy, reduces long-horizon degradation, and outperforms strong continual-learning baselines, including a recent method for temporal knowledge graphs. Source code and data are available at https://github.com/liuyansong98/HiTS-CL.
Online Versatile Incremental Learning: Towards Class and Domain-Agnostic Adaptation at Any Time
Continual learning enables vision systems to adapt to ever-changing data distributions. Despite significant advances, existing approaches fail to capture continuous and concurrent shifts in classes and domains, a critical capability for real-world deployment. This work introduces Online VIL (Online Versatile Incremental Learning), a novel scenario where class concepts and visual domains evolve simultaneously online without explicit boundaries. To better adapt to the challenges of such dynamic environments that more closely resemble real-world conditions, we propose a novel framework TopFlow, Topology preservation with Flow matching representation that contains two complementary mechanisms: Domain-agnostic Flow Matching (DFM) and Global Topology Preservation (GTP). DFM guides the model to have domain-agnostic representations by integrating the geodesic flow kernel into contrastive learning. In contrast, GTP maintains the global structure of the feature space without explicitly storing past examples. Our extensive experiments demonstrate that TopFlow effectively addresses the limitations of existing methods within the Online VIL scenario, achieving state-of-the-art performance in challenging Online VIL. The proposed methods suggest potential directions for building continual learning systems in realistic dynamic environments. Our implementation code is available at https://github.com/KU-VGI/Online-VIL.
Reliable Replay through Spatial Coherence in Online Continual Learning
Continually adapting models to new tasks requires retaining earlier knowledge under limited memory and computation. Experience replay addresses this challenge, but priorities based on individual loss increases overlook how related memories respond to the same update and can overemphasize isolated responses. We introduce SPatial coHErent risk control for REplay (SPHERE), a general replay-allocation method applicable across a broad range of learning settings. SPHERE uses a representation kernel to aggregate signed prospective loss changes, attenuating unsupported spikes while retaining coherent increases. It then formulates allocation as entropy-regularized transport, redistributing uniform source mass toward supported high-risk regions while penalizing long-distance transfers. We derive replay coefficients from the transport objective's sensitivity to the original loss changes and blend them with uniform replay to maintain baseline rehearsal. Our analysis establishes conditions under which kernel aggregation improves risk estimation and bounds transport-value inflation due to residual noise and smoothing bias. Experiments demonstrate that SPHERE improves accuracy and reduces forgetting across noisy-label vision tasks, continual language-model instruction tuning, and code-generation reinforcement learning with incomplete test rewards.
An Analysis of Streaming Deep Reinforcement Learning for Adaptive Continual Learning in Robotics
Over the course of a lifetime, robots may encounter novel scenarios unaccounted for in its original training that result in performance degradation. One common approach to mitigating this issue is to further grow the offline training dataset in hopes of producing a policy robust to these changes. In contrast, biological learning occurs moment-to-moment via a stream of experience, unlike the predominantly batch-based and offline nature of deep learning. Although recent works show the feasibility of stream-based deep reinforcement learning, where updates use only the latest experience, none have shown it to be a viable continual learning framework for adapting robotic policies to unseen changes. In this paper, we present the first analysis of streaming deep reinforcement learning for adaptive continual learning in robotics. In particular, we show that, following an initial pretraining phase, streaming deep RL can enable a robot to successfully adapt to unforeseen changes to itself, its environment, or goals. Our primary experiments within quadruped locomotion demonstrate that a deep neural network robotic policy with certain optimizers and plasticity loss mitigation techniques can successfully leverage domain task knowledge from its pretraining to quickly adapt online to diverse changes via stream learning, outperforming batch-based on-policy methods and improving task success rates by up to 90% over the pretrained policy. Furthermore, we perform additional evaluations on robotic manipulation tasks to determine if our previous observations extend to different robotic morphologies and scenarios. Our results show that the successes observed in quadruped locomotion can be partially realized in manipulation with stability and performance limitations. We conclude with a discussion on the limitations of our work and its implications for the future of continual robot learning.
TM-APR: Thermal Temporal-Memory Localization via Analytic Online Adaptation
Thermal Visual Place Recognition (Thermal VPR) maps camera observations to metric poses within a mapped environment, serving as a prerequisite for autonomous navigation. However, thermal VPR suffers from severe environmental dependence, heavy online retraining overheads, and an inability to model dynamic non-linear shifts, causing existing frameworks to fail during online deployment. To achieve robust domain-invariant place recognition, we bridge Analytic Class-Incremental Learning (ACIL) with domain-invariant VPR for the first time, revealing that its gradient-free matrix updates construct a surprisingly strong baseline that outperforms conventional fine-tuning. Nevertheless, standard ACIL exhibits a critical vulnerability to extreme non-linear thermal fluctuations due to its structural linear assumptions. To overcome this limitation, we exploit a novel algebraic equivalence between ACIL and modern control theory, proposing a framework which embeds Unscented propagation (U-ACIL), Gaussian Mixture partitioning (GMM-ACIL), and minimax optimization (-ACIL) directly into the update loop. Our formulation guarantees exact closed-form matrix updates within computational complexity, bypassing backpropagation to ensure that the online update latency () remains strictly bounded below the sensor acquisition interval (), thereby eliminating trajectory jumps in real-time SLAM pipelines.
Beyond Class Marginals: Bounding Rehearsal Gaps without Freezing Class Co-occurrence
Class-balanced replay controls class frequency but does not determine the interval between successive replay appearances of a class. We study this interval, the rehearsal gap, separately from the class marginal and class co-occurrence, and introduce randomised-pass replay (RPR), which visits each resident class once per shuffled pass. For a fixed set of C resident classes and replay batch size b less than or equal to C, RPR preserves the balanced time-averaged class marginal and bounds every gap by 2*ceil(C/b)-1; a churn-conditional bound applies while the resident set changes. The scheduler uses no future class information and adds no replay examples or forward passes. In a linear-head ER-ACE diagnostic, joint absence from the incoming and replay batches produces a one-sided classifier-bias gradient. Longer absence episodes are associated with larger negative bias displacement, and removing the incoming-loss mask attenuates the scheduling effect. In the primary ER-ACE experiments, RPR improves final average accuracy by 0.72-1.67 percentage points relative to independent class-balanced retrieval under reservoir storage, with positive effects also observed under balanced storage. Pretrained ViTs show positive effects on the tested LT10 streams with small replay batches, while matched larger-batch controls show no material effect. Fixed-cycle and reused-pass controls change more than one temporal statistic, so the experiments do not isolate rehearsal-gap length from all other forms of temporal dependence. The accuracy effects depend on the learner and operating regime.
Brain-Inspired Hierarchical Modularity for General Continual Learning
Continual learning, the ability to learn from sequential experience while retaining and adapting prior knowledge, is central to intelligent systems operating in changing environments. However, conventional continual learning is typically studied with offline task-wise training and clear task boundaries, leaving a substantial gap from general continual learning under online, uncertain, and evolving data streams. In this regime, intelligent systems must separate conflicting experience to reduce interference while integrating compatible experience to promote generalization. Inspired by the organization of the Drosophila learning and memory system, we identify a hierarchical modular principle that coordinates both functions through expert specialization and ensemble integration. We instantiate this principle as lightweight modular adaptation of pretrained foundation models, combining brain-inspired random expansion for expert routing and diversified modular integration across spatial and temporal scales. Across visual recognition, vision-language understanding, ego-exo video understanding, and embodied vision-language-action learning, our method consistently improves learning under online and uncertain data streams, with gains exceeding 50 percentage points over replay-free alternatives in embodied manipulation. These findings support hierarchical modularity as a biologically grounded path for learning from dynamic experience.
Stable Unsupervised Continual Chunking with Sheaf SyncMap
Unsupervised Continual chunking is a fundamental problem in machine learning and neuroscience, where the goal is to identify groups of states that frequently co-occur in temporal sequences. A key challenge is to form accurate chunks while maintaining their stability over time. In this work, we propose sheaf regularization to reduce local inconsistencies in Decentralized SyncMap, a self-organizing system, and thereby stabilize its chunking dynamics. We introduce a radial sheaf structure that penalizes distance-dependent radial motion between pairs of variables. Experimental results show that the proposed method achieves the highest normalized mutual information (NMI) among the evaluated SyncMap variants on 12 of 18 probabilistic Continual General Chunking Problem (CGCP) graphs with two-state memory and on 17 of 18 graphs with dynamic memory. In the sequential adaptation experiment, Sheaf SyncMap also achieves high NMI after shifts in the input distribution, indicating that it can adapt to new knowledge while avoiding the negative transfer commonly observed in modern machine learning systems such as neural networks.
Self-Evolving Memory for Generative Recommendation
Generative recommendation has emerged as a promising end-to-end paradigm for personalized recommendation. However, user preferences continuously evolve over time, making self-evolving an essential capability for generative recommender systems. Existing evolving strategies, such as continual retraining and distillation-based adaptation, directly update the shared model parameters using streaming interactions. Nevertheless, we find that directly applying such strategies to generative recommendation introduces a critical issue, termed evolution conflict. Specifically, heterogeneous preference shifts from different users are optimized within a fully shared autoregressive parameter space, causing dominant behavioral patterns to progressively dominate the model evolution process while underrepresented patterns become increasingly overlooked. To address this issue, we propose a self-evolving memory paradigm for generative recommendation, aiming to enable effective evolution across heterogeneous behavioral patterns. We further identify three key principles for effective self-evolving recommendation systems, including isolated memorization, reinforced evolution, and scalable application. Guided by these principles, we develop LION, a simple yet effective framework centered on a sparse Key-Value memory layer. Specifically, LION introduces sparse memory activation to isolate the evolution of different behavioral patterns, while a consolidation loss is designed to reinforce the learning of underrepresented preference dynamics during continual adaptation. Extensive experiments on diverse real-world datasets demonstrate the effectiveness of LION under various continual evolution settings (e.g., per-period evaluation, user/item group evaluation, and evolution convergence analysis). The codes are released at https://github.com/JazyJiang/Self-Evolving-Memory-for-Generative-Recommendation.
Incremental Evaluation and Training in Relational Deep Learning
Relational Deep Learning (RDL) models multi-tabular databases as temporal heterogeneous graphs to enable end-to-end representation learning. However, prevailing RDL evaluation practices rely on static, single-episode dataset snapshots, overlooking the continuous, time-evolving nature of real-world databases. Consequently, current RDL benchmarks fail to capture how model performance changes as new data accumulates over time. To address this limitation, we introduce an incremental, multi-episode evaluation and training paradigm to assess and improve the temporal robustness and adaptability of state-of-the-art RDL models. Using established large-scale datasets, we examine data evolution and model training dynamics, demonstrating that temporal concept drifts occur in the majority of predictive tasks. We present multiple incremental training regimes for fine-tuning the models and demonstrate that transfer learning is both feasible and highly effective in the RDL setting. Alongside a new temporal evaluation metric that prioritizes near-future accuracy, we show that our incrementally fine-tuned models consistently outperform the standard, expensive, from-scratch trained baselines.
MAUPITI: On-Device Prototype-Based Learning on a Smart Infrared Sensor
Low-resolution infrared (IR) array sensors represent an interesting solution for privacy-preserving human sensing in embedded systems. In this letter, we describe a smart multi-pixel IR sensor integrating a 1616 thermal MOSFET (TMOS) array and a RISC-V microcontroller extended with low-precision SIMD instructions, capable of on-device learning and continual adaptation for pose and gesture recognition tasks under tight memory and power constraints (32kB on-chip memory, 1.5mW). To avoid the memory overheads of backpropagation and replay buffers, we adopt a prototype-based Nearest Class Mean (NCM) classifier in which a simple Convolutional Neural Network (CNN) encoder is trained and quantized offline, while class prototypes are stored and updated on the device in streaming mode. With experiments on two datasets, we show that this approach yields accuracy on par with a conventional classifier, with negligible latency overheads in both the classification and the prototype update (0.29% considering both phases), effectively enabling online adaptation of the perception framework.
An active-learning framework for real-time depth perception from monocular vision streams
Biological visual systems can perceive depth from monocular vision flow, continuously integrating temporal visual cues while maintaining a balance between stability and plasticity in dynamic environments. In contrast, artificial perception models deployed on resource-constrained edge devices are typically trained in a static offline manner and remain frozen after deployment, often suffering severe performance degradation under domain shifts. While large-scale models may encode broad knowledge through massive parameter redundancy, lightweight networks face a static optimization dilemma: forcing compact models to learn universal geometric representations is computationally inefficient and often leads to performance saturation. To resolve this issue, an Online Active Learning (OAL) mechanism is introduced to endow compact neural networks with the capability to adapt continuously during operation. A closed-loop Predict-Evaluate-Correct learning paradigm is established to actively select high-confidence, information-rich signals from streaming visual input. Crucially, Elastic Weight Consolidation (EWC) is employed not merely to prevent catastrophic forgetting, but to enforce Selective Plasticity, preserving parameters that encode globally relevant structural knowledge while allowing local alignment to newly observed environments. Built upon a MobileNetV3-Small backbone, the proposed system achieves approximately a 75% reduction in computational cost while maintaining competitive depth estimation accuracy. Experimental results demonstrate that adaptability is not solely determined by model size, but rather by how effectively parameter plasticity is regulated in dynamic environments.
Continual-Learning Physics-Informed Neural Networks for Parameterized Partial Differential Equations
Physics-informed neural networks (PINNs) incorporate governing equations into neural-network training and can approximate PDE solutions without requiring large observational datasets. Parameterized PINNs (ParamPINNs) further take physical parameters as inputs, allowing a single model to represent a family of PDE solutions over a parameter domain. Existing ParamPINNs, however, still face inefficient training, uneven accuracy across parameters, and overfitting to a limited set of sampled parameter tasks, which can impair generalization to unsampled parameters. To address these issues, we propose a continual-learning physics-informed neural network (CL-PINN), which treats PDE instances at different parameter values as related tasks and learns them sequentially. CL-PINN combines Bayesian-optimization-based active parameter selection, task-wise dynamic loss weighting, sparse physics-constrained replay, and an optional parameter subnetwork to improve task allocation and knowledge retention under bounded active-task capacity. It requires no observational data and is designed to solve parameterized PDEs over relatively broad parameter domains under limited computational resources. Multi-seed evaluations on five benchmarks, including one continuous function and four parameterized PDEs, show that Bayesian selection substantially reduces objective-loss queries relative to grid-greedy search, while sparse replay mitigates forgetting of earlier tasks. Under the prescribed within-case resource protocols, CL-PINN generally provides higher and more balanced solution accuracy than fixed-sampling and grid-greedy baselines. CL-PINN offers a practical route toward learning PDE solutions that generalize across physical parameters and has the potential to support reusable physics-informed surrogates for large-scale engineering parameter studies.
KC-Agent: A Dual-Process Cognitive Architecture for Efficient ML Model Improvement
Data drift poses significant challenges for machine learning systems in production, requiring continuous model updates to maintain performance. We present KC-Agent, a dual-process cognitive architecture for automated ML model improvement that combines fast pattern recognition (System 1) with deliberate incremental updates (System 2). Our approach implements structured memory systems enabling System 1 to leverage successful solutions previously discovered by System 2, achieving efficient pattern-based responses without costly re-computation. KC-Agent incorporates atomic change principles and rollback capabilities to ensure reliable, verifiable updates in production environments. We evaluate our method on five datasets including real-world NASA turbofan data with authentic temporal degradation and synthetic datasets with controlled drift scenarios. KC-Agent achieves state-of-the-art performance (76.8% accuracy) while maintaining optimal efficiency (13.2s execution time), outperforming established cognitive architectures: CodeAct (+2.4%), Tree of Thoughts (+3.6%), ReAct (+8.0%), and Reflexion (+8.9%). Consensus evaluation by a panel of state-of-the-art LLMs confirms superior strategic efficacy (8.33/10 Smartness score), significantly outperforming baseline agents. The knowledge consolidation mechanism delivers 91% speedup over the slow variant while maintaining higher accuracy. Our approach demonstrates both theoretical foundations and practical viability for cognitive-inspired automated ML improvement systems capable of handling complex real-world data drift scenarios.
Plasticity of Growing and Elastic Neural Networks in Online Continual Learning
Neural networks that can grow or both grow and shrink during learning, referred to as growing neural networks and elastic neural networks, respectively, have recently been explored in offline continual learning with a particular focus on catastrophic forgetting. Driven by the observations that 1) online continual learning closely resembles how animals learn; 2) loss of plasticity---the progressive decline in a learning network's ability to learn---is another crucial challenge facing continual learning; and 3) incremental introduction of randomly initialized hidden units was recently shown to help preserve plasticity, in this paper, we study the plasticity of several foundational growing and elastic networks in online continual learning. Our experiments in supervised learning settings show that adaptive growing networks, which incrementally incorporate new, randomly initialized units to the network while keeping all existing connections adaptive, can maintain high prediction accuracy without losing plasticity despite the continuous increase in the dead hidden unit proportion. Furthermore, we demonstrate that adaptive elastic networks, which in addition to progressively adding new hidden units also prune estimated dead hidden units at the beginning of each new task, can achieve excellent accuracy without loss of plasticity while simultaneously maintaining a near-constant, compact size. Our results suggest that growing and elastic networks, which exhibit the ability to adapt its structure to the relevant learning objectives, can be a promising class of algorithms also for preserving high plasticity in online continual learning.
DSETA: A Dual-Stage Continual Learning Framework for Travel Time Prediction in Dynamic Traffic Environments
Estimated Time of Arrival (ETA) prediction is a core component of intelligent transportation systems. As traffic congestion patterns become increasingly dynamic in large cities, maintaining high prediction accuracy poses a major challenge for ride-hailing platforms. Existing methods either fail to adapt to irregular traffic patterns and sudden congestion, or suffer from new distributions without disentangling long-term trends from short-term fluctuations, thereby degrading model performance in real-world scenarios. To address this challenge, we propose DSETA, an incrementally updated Dual-Stage ETA prediction framework. Specifically, the continual learning process is divided into \textit{inter-day} and \textit{intra-day} stages. We first design the \textit{intra-day} learning stage, which relies entirely on real-time data to enable dynamic adaptation to short-term traffic patterns caused by events like holidays or accidents. Next, we develop the \textit{inter-day} learning stage, which leverages aggregated historical data from a short time window to capture knowledge of long-term distribution shifts, such as seasonal trends and traffic network evolution. Subsequently, to prevent catastrophic forgetting and preserve knowledge of regular patterns, we explore a \textit{Historical Traffic Knowledge Consolidation} module. Finally, we validate DSETA's effectiveness and robustness through extensive offline and online experiments conducted on real-world datasets from DiDi's platform. Online A/B tests across three major cities including Beijing, Wuhan, and Xi'an consistently demonstrated performance gains, achieving MAE reductions of 6.62%, 0.73%, and 2.40% respectively. This framework has been successfully deployed in DiDi's production environment, processing hundreds of millions of daily requests and validating its strong performance in industrial applications.
Versatile On-device Adaptation at the Edge by Unifying Few-shot, Zero-shot, Continual, and In-context Learning
With the ever-increasing pervasiveness of smart edge devices, the demand is growing for applications that can be tailored to users (e.g., custom keyword spotting) or patients (e.g., adaptive health monitoring). Yet, most edge devices rely on fixed inference algorithms and thus cannot learn on-device to personalize predictions. When they can, devices typically support only a specific learning scenario, such as few-shot learning (FSL): going beyond this requires resorting either to another specialized device or to cloud-based retraining, which implies significant energy and latency overheads, a lack of real-time capabilities, and privacy concerns. In this work, we introduce embedder-centric learning (ECL), a framework that unifies four different online learning scenarios: FSL for on-the-fly customization, continual learning (CL) for knowledge accumulation, zero-shot learning (ZSL) for leveraging semantic data, and in-context learning (ICL) for adapting beyond classification. We demonstrate in silicon that ECL can be deployed on resource-constrained devices across four real-world use cases representative of the aforementioned learning scenarios. Our approach establishes a new state-of-the-art performance for FSL character recognition (Omniglot: 96.8% for 5-way 1-shot, 83.3% for 32-way 1-shot), and the first hardware baseline for CL in keyword spotting (NeuroBench keyword FSCIL: 71.8% for 200-way 5-shot). Moreover, we present the first hardware demonstrations of ZSL with semantic data (60.6% for 5-way spoken sentence classification) and ICL (46.2% at the 500th token of RegBench) operating at micro-to-milliwatt power budgets. Therefore, by unifying multiple learning scenarios, we pave the way for smart and versatile devices that can adapt right at the edge, without reliance on the cloud.
UniMem: Complementary Episodic-to-Parametric Memory for Boundary-Agnostic Task Streams
Memory is essential for LLM agents to accumulate task experience and reuse task-specific execution strategies. However, real-world deployment over boundary-agnostic and evolving task streams exposes a fundamental stability-plasticity dilemma. External retrieval-based memory can rapidly absorb new evidence, but it often fails to internalize recurring execution patterns and incurs inference-time retrieval overhead. Parametric memory enables stable and efficient execution once learned, but typically relies on explicit task boundaries and fixed parameter budgets. Inspired by the human brain, which balances plasticity and stability through complementary episodic storage and gradual consolidation, we propose UniMem, a self-routing framework for autonomous memory management. UniMem uses learnable routing tokens as memory controllers, enabling adaptive coordination between complementary memory pathways: novel or sparse tasks are retained in an episodic buffer for retrieval-augmented execution, while recurring and reliable patterns are consolidated into expandable parametric memory. By decoupling task identification from task execution with routing tokens and parametric memory blocks, UniMem expands memory on demand without task labels during deployment or uncontrolled parameter growth. Experiments on long-horizon streaming task sequences show that UniMem consistently outperforms baselines while maintaining execution fidelity, achieving an average gain of 4.0 EM points across three backbone models.
GeoMFD: Continual Drone-View Geo-Localization with Geometry-Aware Adapter and Margin-Field Distillation
Existing drone-view geo-localization (DVGL) methods are mainly developed under a static training paradigm, where models are optimized for fixed environments with all training data available in advance. However, this paradigm is difficult to extend to real-world deployment, where drones may encounter diverse environments and require multiple environment-specific models, resulting in additional storage and model-selection costs. Directly adapting a single model to new environments also risks distorting previously learned cross-view embedding geometry and causing forgetting. To address these challenges, we formalize the continual drone-view geo-localization (C-DVGL) setting and propose GeoMFD, a geometry-aware continual adaptation method for DVGL. GeoMFD combines a cold-start bootstrapping strategy (CBS), a geometry-aware adapter (Geo-Adapter), and margin-field distillation (MFD) to balance adaptation and cross-view geometry preservation. CBS initializes a stable embedding space, Geo-Adapter enables environment adaptation through controlled residual corrections, and MFD preserves similarity margins between positive pairs and hard negatives to alleviate cross-view geometry forgetting. Extensive experiments demonstrate that GeoMFD effectively mitigates forgetting and achieves competitive performance with environment-specific DVGL methods using a single continuously updated model.
A Continual Validation, Updating, and Decision-Making Framework for Self-Adaptive Digital Twins via Robust Model Predictive Control: A Case Study in Additive Manufacturing
Digital Twins rely on surrogate models to mirror physical systems in real time, yet these models can degrade as operating conditions evolve, a phenomenon known as concept drift. Maintaining surrogate fidelity under drift, particularly when models must also capture aleatoric uncertainty, remains an open challenge. Existing adaptive frameworks lack principled mechanisms for detecting when updates are needed, for efficiently adapting models from limited streaming data, and for certifying that updates genuinely improve predictive performance. Here we present an adaptive Digital Twin framework that integrates a Fisher score--based multivariate drift detector, Low-Rank Adaptation (LoRA) for parameter-efficient continual learning, and a Mann--Whitney test for online statistical validation. The framework monitors surrogate-model confidence via Fisher score vectors, triggers targeted fine-tuning of fewer than 1% of model parameters upon drift detection, and statistically certifies predictive improvement before deploying the updated surrogate. Applied to a stochastic linear system and a directed energy deposition additive manufacturing process as case studies, the framework successfully detects distributional shifts with short delays and restores both predictive accuracy and uncertainty quantification under abrupt and incremental drift. These results establish a statistically rigorous and computationally tractable pathway for sustaining the trustworthiness of neural-network--based Digital Twins throughout their operational life cycle.
Learning to Fine-tune Foundation Models under Resource Limitations
We study the problem of optimal continual fine-tuning for a pre-trained Foundation Model deployed at a resource-limited device. At each time slot, a new batch of training data arrives, and the controller is faced with two options: either use the data to fine-tune the model and incur a compute cost, or do not fine-tune the model and discard the data. After the decision, the performance of the current model is measured in terms of an application-specific performance metric such as classification accuracy. Our objective is to learn an optimal policy that determines \emph{when to fine-tune the model} on a single task (e.g., sentiment analysis), under a finite compute budget. We formulate this online decision-making problem as a constrained Markov Decision Process, where the system state captures three essential aspects: (\textit{i}) model's performance, (\textit{ii}) computational budget, and (\textit{iii}) data distribution relevance to historic data encountered up to that point. The transition to the next state is stochastic and therefore, we propose a reinforcement learning-based method to solve this problem, namely the \emph{actor-critic} algorithm. We also consider the special case where the performance of fine-tuning for a given model can be predicted or estimated prior to decision; in this case the problem becomes a Dynamic Programming one. Experiments with a large pre-trained model on a widely-used text classification dataset demonstrate that our method consistently outperforms fine-tuning approaches with the same compute budget by more than in terms of accuracy and achieves of full-parameter fine-tuning accuracy while requiring only of the fine-tuning steps.
Interference and Retention in Continual Learning
Continual learning commonly relies on post-hoc mechanisms such as replay, elastic regularization, or distillation. This work argues that forgetting should instead be modeled directly as interference between tasks. In the frozen-feature regime, forgetting from learning a new task is exactly the interference energy induced on the old task. In deep networks, the same quantity is recovered through path-averaged curvature with minimal additional forward passes. When task supports are disjoint, forgetting can be eliminated structurally and when task supports overlap in conflicting directions, a non-zero distortion floor is unavoidable. The same geometry optimally merges models through task-aware orthogonalization. From this analysis we derive Interference-Gated Functional Allocation (IGFA), a replay-free, Fisher-free method that shares directions when tasks align and protects them when they conflict. Across benchmarks, IGFA achieves lossless retention when tasks are structurally separable and moves unavoidable cost from irreversible forgetting into deferred but recoverable plasticity when they are not. It matches the strongest replay-free structural baselines on dissimilar-task streams and improves on unconditional projection when similarity makes transfer worth preserving.
To Retain or to Adapt? Generalizing Continual Learning
The Continual Learning (CL) literature has long been driven by the goal of mitigating catastrophic forgetting. This objective rests on a pervasive, often unstated assumption: that a lifelong learner should approximate the Joint-Task Learning (JTL) solution and retain all previously acquired knowledge. We challenge this retention-centered premise, arguing that in non-stationary environments prioritizing retention can impede real-time adaptation. Shifting the focus to the Average Lifelong Error (ALE), we formalize CL as an online optimization problem governed by the interaction between environmental and learning dynamics. We introduce Transfer Efficiency as a quantitative measure of the tension between Instability, the bias inherited from conflicting past experience, and Transient Error, the optimization cost of learning new tasks from scratch. Under mild convergence conditions, holding across linear and neural network models, this decomposition yields a Critical Task Duration: a closed-form threshold beyond which historical knowledge transitions from a warm-start advantage to an optimization liability whenever retention induces a positive stationary bias. We validate these theoretical predictions on continual image classification and reinforcement learning benchmarks. Finally, by connecting continual learning to the online learning framework of predictable sequences, we show that JTL is only one instance of a broader family of objectives, and we propose a new general class of continual learning algorithms, which we call Predictive Continual Learning. Predictive CL algorithms optimize expected future performance under an explicit, dynamically updated model of future tasks. As a proof of concept, we analyze a Window algorithm that interpolates between JTL and Independent-Task Learning (ITL), outperforming both under controlled distributional drift.
FlatManifold: Robust Continual Learning under Severe Label Noise and Domain Shifts via Intrinsic Manifold Flattening
In non-stationary streaming environments, simultaneously adapting to complex, non-linear domain shifts via continual learning while mitigating the catastrophic effects of severe, uncalibrated label noise poses a fundamental mathematical challenge. In this paper, we propose \FlatManifold{}, a novel, streamlined robust continual learning framework that utilizes a Nyström manifold flattening map based on the kernel trick and projection onto an orthogonalized Reproducing Kernel Hilbert Space (RKHS). Unlike traditional methods that rely on complex, error-prone sample-filtering pipelines, the proposed approach exploits the intrinsic mathematical robustness of the flattened space itself. By mapping feature distributions onto a fixed orthogonal target topology with a ridge regularizer, the framework naturally smoothes and counteracts the influence of extreme label noise during the optimization process. Concurrently, catastrophic forgetting is prevented via a continual topology brake term that leverages the covariance matrix of past experiences. Extensive evaluation on real-world multi-session robotics datasets demonstrates that even under severe conditions featuring 40% symmetric label noise, \FlatManifold{} successfully mitigates gradient corruption. Under extreme cross-session domain shifts spanning various seasons and lighting conditions, the proposed framework establishes high generalization capabilities, significantly outperforming standard sequential optimization baselines and proving that structural linearization itself serves as a powerful mathematical barrier against distributed label corruption.