perovskite solar cells
Latest papers
9 papers4 papers in the last four weeks, up 33% on the four weeks before. 0.0% of all new papers.
Experimental optimization of perovskite solar cells is constrained by combinatorial diversity in absorber compositions, device layers, and processing, which makes virtual screening attractive for prioritizing recipes before fabrication. We develop a surrogate-guided reinforcement-learning framework that casts recipe generation as virtual screening, enriching candidate shortlists near high-performing experimental neighbors. A frozen Tabular Prior-data Fitted Network (TabPFN) guides recipe generation, while a reference pool of 890 measured devices enables neighborhood-based assessment. Five-fold evaluation on 1,846 devices shows top-ten selection raises mean power conversion efficiency (PCE) from 19.68% to 23.74%. Three learned policies are compared with six baselines under 3,000 surrogate evaluations per run. In top-100 shortlists, Proximal policy optimization (PPO) and recurrent PPO (RPPO) achieve neighborhood-supported hit rates of 23% and 24% (7.9- and 8.3-fold Pure Random's 2.9%), versus 10% (3.4-fold) for the baselines with the highest supported hit rate (L-SHADE and Ax BO, tied) at . Gains coexist with weak-support fractions. Of 9,000 recipes, 65.4% match a composition family at similarity 0.80, falling to 11.7% at 0.90. Results support enrichment-oriented prioritization but not experimental performance, seed robustness, or matched-budget advantage.
Interpretable machine learning diagnosis of degradation mechanisms in lead-free solar cells from temperature- and illumination-dependent electrical measurements
Machine learning coupled with device simulation is widely used to optimize thin-film solar cells, but almost exclusively in the forward direction, from device parameters to predicted performance. The inverse problem encountered after fabrication, namely identifying the mechanism that limits a given device, is still addressed by manual inspection of characterization data. In this work, both directions are examined for lead-free solar cells using approximately 42,000 SCAPS-1D simulations. Replacing the Spiro-OMeTAD hole transport layer with CuI increases the simulated power conversion efficiency from 19.6% to 21.6%, almost entirely through the fill factor. Surrogate models trained and tested on a factorial parameter grid substantially overstate their predictive accuracy. An XGBoost regressor attains on held-out grid points but only 0.58 on independently sampled devices, whereas training on a Latin hypercube design of comparable size restores . For the inverse problem, a multi-label classifier identifies which of six degradation mechanisms are present from simulated temperature- and illumination-dependent open-circuit-voltage measurements. It achieves a macro score of 0.938, compared to 0.687 for a calibrated physics-rule baseline. The classifier does not, however, generalize to combinations of mechanisms absent from the training set.
Evidence-grounded large language models guide perovskite solar cell design and optimization
Using large language models to interpret experimental evidence, design discriminating experiments and formulate well-supported mechanistic explanations remains a central challenge in materials research. Here we establish PSM-Bench, an 800-question benchmark developed by perovskite researchers to evaluate scientific reasoning in perovskite photovoltaics. We also introduce OpenPerov, an expert-informed language-model framework that learns from expert-calibrated evidence records reconstructed from 4,035 training articles; these records link experimental strategies, controls and observations to mechanistic interpretations. Structured-evidence adaptation outperformed conventional question-answer training, and OpenPerov Flash ranked first among 13 closed-book systems. OpenPerov Pro raised Scientific Mastery further, from 87.6 to 89.1, by revising selected passages with retrieved evidence. On questions derived from subsequent studies, both models also outscored expert-authored answers. In an experimental test of self-assembled monolayer design, OpenPerov selected a K analogue that outperformed the Na analogue preferred by experts. Devices incorporating the selected contact reached a power conversion efficiency of 27.05% and retained 96.74% of their initial efficiency after 1,000 h of dark thermal ageing at 85 C. These results show that reconstructed scientific reasoning provides an effective basis for building domain models that interpret experiments and inform materials design.
VerifiedLab: Harnessing Knowns for Unknowns
Across human history, knowledge has undergone several transitions, from orality to writing and then to digital archives. At each transition, humans established new conventions to preserve knowledge for the new era. Nowadays, as research agents are increasingly deployed for laboratory experiments, knowledge is crossing another boundary: from records written for humans to those for machines. In this work, we introduce VerifiedLab, a multi-agent harness framework for this human-to-machine transition of knowledge. VerifiedLab transforms research output from passive artifacts into active systems that accelerate downstream use, adoption and prediction of future trends. In VerifiedLab, a team of AI scientists with distinct roles reasons over records verified field by field: a principal investigator plans, a librarian computes the evidence directly from the records, specialists draft, and a gate and a critic check each claim against the measured reliability of its data before the harness decides whether to release or withhold it. We demonstrate the efficacy of VerifiedLab through extensive experiments on perovskite solar cells: VerifiedLab recovers known physical trends, anticipates devices reported a year later, and lets AI scientists inherit the literature together with a measure of how far it can be trusted. By scaling the inference-time verification compute, VerifiedLab introduces a new pathway for knowledge dissemination and machine harness for AI co-scientists.
Benchmark for Structured Retrieval-Augmented Generation in Perovskite Photovoltaics
While retrieval-augmented language models increasingly serve as literature assistants in the physical sciences, existing benchmarks evaluate them primarily on qualitative text overlap or through model-based scoring rather than against verified experimental ground truth. In experimental materials disciplines such as perovskite photovoltaics, however, the most critical inquiries are inherently quantitative and aggregate measurements across dozens or hundreds of papers. Here, we present a quantitative question-answering benchmark where all 755 ground-truth answers are computed directly from 45,441 measured device records (40,889 human-curated records through 2021 and 4,552 records extracted from 2022-2026 literature). Benchmarking six retrieval architectures over 158,274 passages from 25,662 papers using an open 14B model on a single 24 GB GPU, standard passage retrieval tops out at 16-23% accuracy (compared to 1.6-6.5% zero-shot). In contrast, equipping the language model with read-only SQL execution over the structured device table elevates accuracy to 51.5% on historical and 50.8% on prospective literature -- a 33.01.8 percentage-point advantage over hybrid text retrieval. Aggregate queries spanning extrema, distributions, and filtered record counts prove virtually unsolvable via text retrieval alone, demonstrating that systematic table extraction is an operational prerequisite for literature-scale quantitative inquiry.
Virtual-Alloy Physics-Aware Semantic System for extrapolative prediction of perovskite solar cells
Existing machine-learning models for perovskite solar cells struggle to predict devices made from new materials. Most treat device layers as arbitrary categorical labels and represent perovskite absorbers either through featureless composition vectors or through rigid crystal graphs that require a pre-solved unit cell. As a result, they cannot generalize to unrecorded alloys or unfamiliar cell architectures. We present the Virtual-Alloy Physics-Aware Semantic System (V-PaSS), an architecture built around the physical continuity of perovskite solid solutions. V-PaSS represents arbitrary mixed-cation, mixed-halide absorbers by interpolating relaxed crystal graphs of 23 pure endpoint compounds via Vegard's law with learned bandgap bowing. For the device stack, it couples layer sequence and cell polarity (n-i-p or p-i-n) with interfacial band offsets and encodes chemical descriptions with a scientific language model. Evaluated under an institution-grouped protocol where test devices come exclusively from unseen laboratories, an untuned default configuration of V-PaSS achieves the lowest error among fourteen tested models (2.861% MAE, a 5.2% relative reduction over a gradient-boosted baseline at 3.017%, and outperforming the best tuned benchmark at 2.912%). V-PaSS pulls furthest ahead where test devices differ most from training: reducing error by 15.7-19.0% on unseen absorber alloys, by 16.1% on mixed absorbers from new laboratories, and widening its lead over the baseline by 3.6 on devices with unobserved transport layers. Combined with tree ensembles, V-PaSS sets a new state of the art across all five benchmark splits.
Provenance-grouped protocol for evaluating machine learning in perovskite photovoltaics
Machine-learning models for perovskite solar cells are typically evaluated using random data splits, which we show systematically leak information through massive internal duplication. Because nearly two-thirds of curated devices share their exact recipe with another, random splits primarily reward the mere recall of historical data rather than testing true physical generalisation. To solve this, we mapped the institutional provenance of the Perovskite Database and established a rigorous hierarchy of grouped splits that progressively isolate duplicate devices, publications, and institutions. Benchmarking thirteen models establishes new state-of-the-art performance across all splits and reveals a critical regime shift: while tree ensembles dominate random splits by recognising familiar recipes, their ranking collapses on genuinely unseen institutions and future discoveries, where composition-aware neural architectures excel. Furthermore, feature importance demonstrates that the device architecture and fabrication methodology dictate final efficiency just as strongly as the absorber chemistry. This standardised protocol empowers the community to separate memorisation from true physical discovery.
LEAP: A closed-loop framework for perovskite precursor additive discovery
Efficient discovery of precursor additives is essential for improving the performance of perovskite solar cells, yet the large chemical space makes conventional trial-and-error screening inefficient. We develop LEAP(LLM-driven Exploration via Active Learning for Perovskites), an expert-in-the-loop closed framework that couples a domain-specialized large language model(LLM) with active learning for iterative additive prioritization. The LLM is trained to extract mechanism-relevant knowledge from the perovskite additive literature and to represent candidate molecules through interpretable descriptors, which are further integrated into a Bayesian optimization workflow for uncertainty-aware prioritization under low-data conditions. Benchmark results on unseen literature show that the domain-specialized model outperforms general-purpose models in mechanism-consistent reasoning. Experimental validation in an expert-in-the-loop proof-of-concept study suggests improved additive prioritization across three screening rounds, leading to average device PCEs of 20.13% and 20.87% for the later-round 6-CDQ- and 2-CNA-treated devices, respectively, compared with 19.25% for the control, with a champion PCE of 21.32%. These results provide preliminary evidence that literature-grounded mechanistic descriptors, when coupled with Bayesian optimization and expert feasibility review, can support mechanism-aware additive prioritization in perovskite photovoltaics.
PeroMAS: A Multi-agent System of Perovskite Material Discovery
As a pioneer of the third-generation photovoltaic revolution, Perovskite Solar Cells (PSCs) are renowned for their superior optoelectronic performance and cost potential. The development process of PSCs is precise and complex, involving a series of closed-loop workflows such as literature retrieval, data integration, experimental design, and synthesis. However, existing AI perovskite approaches focus predominantly on discrete models, including material design, process optimization,and property prediction. These models fail to propagate physical constraints across the workflow, hindering end-to-end optimization. In this paper, we propose a multi-agent system for perovskite material discovery, named PeroMAS. We first encapsulated a series of perovskite-specific tools into Model Context Protocols (MCPs). By planning and invoking these tools, PeroMAS can design perovskite materials under multi-objective constraints, covering the entire process from literature retrieval and data extraction to property prediction and mechanism analysis. Furthermore, we construct an evaluation benchmark by perovskite human experts to assess this multi-agent system. Results demonstrate that, compared to single Large Language Model (LLM) or traditional search strategies, our system significantly enhances discovery efficiency. It successfully identified candidate materials satisfying multi-objective constraints. Notably, we verify PeroMAS's effectiveness in the physical world through real synthesis experiments.