Piezoelectric

Slip detection is fundamental to dexterous manipulation, yet existing systems often lack precise characterization of detection latency and cross-platform generalization. We present SlipSense, a multimodal tactile slip-detection framework built on TacV5, a compact sensor integrating a $32 \times 32$ piezoresistive array operating at 240 Hz and a 3-axis MEMS accelerometer operating at 8 kHz. The piezoresistive array captures spatial pressure distributions, while the accelerometer captures friction-induced vibrations, providing complementary slip cues. The framework performs modality-specific encoding, intra-sensor fusion, and cross-modal attention with causal temporal prediction at 240 Hz. Experiments on a dataset of 1.4 million frames spanning 37 objects demonstrate the complementarity of the two modalities. SlipSense achieves 96.7% Macro F1 with a false-positive rate below 1.6%, detecting 76% of slip events within 23.1 ms. When trained solely on UMI data, SlipSense generalizes zero-shot to a Tesollo dexterous hand, transferring across unseen objects, distinct sensor units, and robotic platforms without retraining.

Crystal symmetry dictates whether a physical response tensor must vanish, establishing a direct test for machine learning predictions independent of property calculations. We derive the parity gap, a group-theoretic metric quantifying the piezoelectric tensor freedom permitted by a crystal's proper rotation subgroup $SO(3)$ but eliminated by inversion symmetry in $O(3)$. Across state-of-the-art equivariant neural network architectures, unconstrained $SO(3)$ models systematically predict forbidden non-zero responses matching the parity gap of each centrosymmetric crystal class, while polar distortion paths dynamically map output responses to the loss of inversion symmetry. Regression controls confirm that enforcing full $O(3)$ parity incurs no consistent accuracy cost across predictive tasks. Crucially, while training interventions using explicit zero labels reduce violation magnitudes, they leave residual forbidden outputs. Exact physical compliance instead requires structural enforcement through $O(3)$ representation design or explicit output antisymmetrization. The parity gap thus provides a unified framework to distinguish empirical error reduction from exact structural compliance with physical law.

Thermo-mechanical compliant devices are commonly designed with small-strain linear elasticity and temperature-independent material properties, even though they might operate hundreds of kelvin above ambient where both assumptions are questionable. In this work, we quantify the effect and cost of each assumption in multi-material topology optimization of thermally actuated compliant devices. To this end, we introduce a physics-informed, simultaneous analysis-and-design framework with (i) a finite-strain quadratic-Hencky (logarithmic-strain) constitutive model whose isotropic thermal eigenstrain admits an exact additive split in log-strain space, and (ii) temperature-dependent conductivity, thermal expansion, and elastic moduli for a titanium--copper--steel material system. We optimize a thermal actuator and a thermal gripper at three design temperatures under both a baseline model and the full physics, subject to mass and manufacturability constraints. Every converged design is re-evaluated by verified nonlinear finite element solvers in the full factorial of constitutive law and property model. The comparison between the two factors reveals that the constitutive law is the decisive modeling choice: These devices work as linkages where linear kinematics mistakes rotation for compressive strain; its error therefore grows with the design temperature and concentrates on the very layouts that exploit rotation best. Because a linear optimizer also steers away from the rotation-rich mechanisms that would expose this bias, the model can deceptively appear trustworthy when validated against its own designs. Designing with the full physics yields consistently stronger and more temperature-robust devices at a modest increase in design-time cost.

Low-Gain Avalanche Diodes (LGADs) and AC-coupled Low-Gain Avalanche Diodes (AC-LGADs) are promising technologies for precision timing and four-dimensional tracking. In AC-LGADs, the AC pad is coupled to the resistive n$^{+}$ layer through a dielectric layer, while the gain layer remains unsegmented. This structure provides a 100% fill factor and enables good spatial resolution with a relaxed readout pitch. The same signal-sharing mechanism that makes interpolation possible complicates the readout: charge spreads across multiple pads, the useful information can approach the electronic-noise threshold, and matrix-inversion approaches can become computationally challenging and sensitive to off-diagonal noise. In this work, we study machine-learning-based reconstruction and compression for resistive silicon sensors. We use full-waveform information from correlated pads to regularise the reconstruction and extract spatial information beyond what is available from binary readouts or reduced-amplitude summaries. We first introduce recurrent neural network models based on LSTM layers, which provide a proof-of-concept implementation for full-waveform reconstruction and have been tested for FPGA deployment using \hls. We also study routes towards bandwidth reduction with waveform rasterisation and window-selection methods, and extend the approach beyond the first model to topology-agnostic transformer-based architectures that use pad coordinates as part of the input. These models are designed to support arbitrary pad counts and geometries, mitigate edge distortions, preserve approximately $10~μ\mathrm{m}$ position resolution for $500~μ\mathrm{m}\times500~μ\mathrm{m}$ pitched sensors, and guide future resistive-silicon sensor designs

Guided wave-based structural health monitoring (GWSHM) with onboard transducers offers significant potential for the early diagnosis of damage in engineering structures. However, the practical deployment of deep learning models is often hindered by the limited availability of labelled experimental data and the high computational cost of generating large-scale high-fidelity simulation datasets. This study presents a multifidelity transfer learning framework that integrates lightweight physics-based simulations, convolutional autoencoder (CAE)-based deep feature learning, a feed-forward neural network, and limited experimental measurements for accurate damage localisation and sizing in plate-like structures instrumented with piezoelectric transducers. A computationally efficient one-dimensional time-domain spectral element model is employed to generate a large synthetic dataset for pretraining, while transfer learning adapts the model to experimental domains using only a small amount of labelled data. The CAE-based transfer learning framework significantly outperforms its CNN-based counterpart in damage localisation accuracy. The model achieves excellent predictive performance with $R^2$ scores exceeding 0.93 for damage localisation and 0.99 for damage sizing. Its generalisation capability is demonstrated on previously unseen data, showing high prediction accuracy for damage scenarios not represented during pretraining or fine-tuning. The results establish the proposed framework as an accurate, computationally efficient, and practically viable solution for real-world GWSHM applications.

Structural health monitoring (SHM) has emerged as an essential tool for ensuring the integrity and reliability of critical engineering structures, particularly in aerospace applications. Since each sensing technology has its limitations, the fusion of different modalities enables capturing a more complete picture of inhomogeneous materials, like composites. However, effective multisensor data fusion in SHM is often hindered by heterogeneous sensing modalities that operate at disparate sampling frequencies and acquisition intervals. To address these challenges, this paper proposes a Transformer-based data fusion framework that integrates multisensor data streams from piezoelectric transducer (PZT) capturing ultrasonic guided wave signals and fiber Bragg grating (FBG) sensors for strain measurements. By incorporating an attention-mechanism visualization, the proposed framework enables transparent, multitask learning for both health indicator (HI) prediction and damage localization. The framework was experimentally validated using aircraft composite structures subjected to compression-compression fatigue cyclic loading. For HI prediction, the framework consistently achieved a mean absolute error (MAE) and root mean squared error (RMSE) below 0.1, representing a nearly 60% performance improvement over single-sensor approaches (PZT or FBG alone) and baseline deep learning models. For damage localization, the model demonstrated the highest accuracy, maintaining an MAE and RMSE below 0.0465 and 0.1571, respectively. These results demonstrate that the proposed Transformer-based data fusion framework significantly outperforms single-source models and state-of-the-art deep learning models in both HI prediction and damage localization accuracy.

Piezoelectric composites are widely used in sensors, actuators, transducers, and energy-harvesting devices because their effective electromechanical performance can be tailored by combining constituent phases and microstructural architecture. However, conventional computational homogenization based on direct numerical simulation (DNS) is computationally expensive, particularly for multiscale simulations and material design tasks that require repeated homogenization analyses. To address this limitation, this work proposes a piezoelectric deep material network (PDMN) to efficiently homogenize two-phase piezoelectric composites. The proposed framework embeds the governing electromechanical homogenization relations directly into the network architecture, yielding a physics-informed, semi-analytical surrogate that explicitly captures the two-way coupling between the mechanical and electrical fields across constituent phases. The network is trained offline on linear electroelastic datasets and, through a fully coupled Newton--Raphson solution with a consistent electromechanical tangent, subsequently used for efficient online prediction under broader constitutive settings, including nonlinear electroelasticity and history-dependent responses. The framework is validated on two-phase composites of polyvinylidene fluoride (PVDF) and lithium niobate (LiNbO$_3$) with reversed phase arrangements under nonlinear electroelastic loading, and on a viscoelastic--piezoelectric composite exhibiting coupled stress relaxation. Numerical examples show that the proposed PDMN achieves high predictive accuracy while reducing the computational cost by more than three orders of magnitude compared with DNS. The proposed framework, therefore, provides an efficient and reliable surrogate for the multiscale analysis and design of piezoelectric composites.

Existing stretch and touch sensors for robots are generally expensive with respect to at least one of material costs, required manufacturing equipment, or manufacturing time. We present and experimentally characterize a conductive fiber made using only inexpensive commercial off-the-shelf parts (conductive thread at $0.07/ft, silicone tubing at$0.94/ft) and tools (loop-style needle threader at $2), which can be manufactured quickly (20 cm length in 2 minutes.) We demonstrate its use as a resistive strain sensor with three applications: Triggering a grasp in a pneumatically actuated assistive finger, sensing the pose of a pneumatically actuated robotic strap, and estimating the pose of a flexible solid. We also demonstrate that it can be used as a capacitive sensor with two applications: First, as a touch sensor which triggers a commercial robot arm to move, and second, as a near-field sensor enabling the robot arm to follow a moving hand. The capacitive sensors are knitted, showcasing the high flexibility of the fiber. We discuss methods for improving manufacturing scalability and their cost trade-offs. Finally, we demonstrate a method for repairing a cut fiber.

Piezoresistive tactile sensors are attractive for robotic manipulation because they are thin, lightweight, low-cost, and scalable to dense large-area sensing. However, existing systems still face a practical trade-off: recent reproducible designs emphasize accessibility and ease of reproduction, whereas high-fidelity readout architectures remain more difficult to fabricate, assemble, and deploy. We present HiPi, a reproducible high-fidelity piezoresistive sensing system for robotic manipulation. Building on a low-crosstalk readout principle, HiPi redesigns the complete hardware stack around reproducibility, deployability, and multi-sensor scalability. The system includes a compact readout PCB compatible with commercial PCB fabrication and assembly services, eliminating manual soldering; a smaller and lower-cost STM32-based MCU module; an optimized communication pipeline that achieves 220 Hz readout in a bimanual setup with four dense tactile arrays (2048 taxels in total); and FPCB-based conductive layers that simplify sensor fabrication and stacking. Experiments with structured 3D-printed contact patterns show that HiPi preserves contact geometry substantially better than a reproducible baseline, improving the average IoU from 0.428 to 0.797 and the average Dice score from 0.539 to 0.886. These results suggest that HiPi bridges an important gap between reproducible fabrication and high-fidelity readout, making dense piezoresistive tactile sensing more practical for bimanual manipulation and multi-fingered robotic systems.

Force and tactile sensing are indispensable in contact-rich manipulation. However, force-aware robot learning faces critical challenges due to the incompatible assembly of tactile and force sensors in handheld or wearable devices. To address these limitations, we first introduce AetheRock for gripper-force, vision, and tactile data collection, which is an arm-worn device featuring a modular and easily manufactured visuo-tactile sensor, GelSlim-MiniFab, at the fingertip, a resistive pressure sensor at the human finger contact region, a customized PCB module, and a wearable kit for comfortable and robust collection. Building on this, we propose ForceVT, a representation learning framework that uses force and vision to guide fidelity-agnostic tactile learning, enabling robust inference in any tactile situation. Real-world experiments show that AetheRock achieves qualified data efficiency and that ForceVT effectively alleviates inefficiencies when visuo-tactile sensors exhibit manufacturing and utilization inconsistencies. Overall, our work mitigates the limitations of gripper-force vision-tactile robot learning through innovative hardware design and algorithms.

Aerobat is a bat-inspired flapping-wing robot with a wing gait generate by the computational structure, a planar linkage of carbon fiber links driven by a single motor. This design minimizes weight but couples both wings to a shared input motor, eliminating independent thrust control and preventing asymmetric maneuvers. This thesis investigates thrust regulation by modifying the effective length of the first radius link $R_1$ in the computational structure. Static experiments using FDM-printed $R_1$ links at three lengths (28.58, 29.33, and 30.08 mm) across 3,4, and 5 Hz flapping frequencies demonstrated that a 1.5 mm length increase produced a 37% increase in peak lift force and shifted peak force timing within the downstroke. An additional experiment using a string-actuated regulator mechanism was performed. Further actuation methods were evaluated: sub-gram micro-servo and piezoelectric slip-stick. After both the string-tension and micro-servo actuation methods failed due to structural member compliance and motor fragility respectively, a TULA-50 piezoelectric slip-stick actuator was selected. Multiple force-amplifying mechanisms were prototyped, resulting in a direct-drive variable-length mechanism. This final mechanism was demonstrated in a preliminary bench-top test, though insufficient force output prevented dynamic testing during flapping. This work establishes linkage-length modulation via embedded slip-stick actuation as a viable approach to independent wing thrust control.

Autonomous experimental systems are increasingly used in materials research to accelerate scientific discovery, but their performance is often limited by low-quality, noisy data. This issue is especially problematic in data-intensive structure-property learning tasks such as Image-to-Spectrum (Im2Spec) and Spectrum-to-Image (Spec2Im) translations, where standard active learning strategies can mistakenly prioritize poor-quality measurements. We introduce a gated active learning framework that combines curiosity-driven sampling with a physics-informed quality control filter based on the Simple Harmonic Oscillator model fits, allowing the system to automatically exclude low-fidelity data during acquisition. Evaluations on a pre-acquired dataset of band-excitation piezoresponse spectroscopy (BEPS) data from PbTiO3 thin films with spatially localized noise show that the proposed method outperforms random sampling, standard active learning, and multitask learning strategies. The gated approach enhances both Im2Spec and Spec2Im by handling noise during training and acquisition, leading to more reliable forward and inverse predictions. In contrast, standard active learners often misinterpret noise as uncertainty and end up acquiring bad samples that hurt performance. Given its promising applicability, we further deployed the framework in real-time experiments on BiFeO3 thin films, demonstrating its effectiveness in real autonomous microscopy experiments. Overall, this work supports a shift toward hybrid autonomy in self-driving labs, where physics-informed quality assessment and active decision-making work hand-in-hand for more reliable discovery.

Microelectromechanical systems (MEMS) speakers are compact, scalable alternatives to traditional voice coil speakers, promising improved sound quality through precise semiconductor manufacturing. This review provides an overview of the research landscape, covering baseband-displacement, ultrasound-based, and thermoacoustic sound generation concepts, classifying MEMS speakers by their actuation principles as electrodynamic, piezoelectric, or electrostatic devices. A comparative analysis of performance indicators from 1990 to 2026 highlights the dominance of piezoelectric MEMS with baseband displacement, focusing on miniaturization and efficiency. The review outlines upcoming research challenges and identifies potential candidates for achieving full-spectrum audio performance. A focus on innovative approaches could lead to widespread adoption of MEMS-only speakers.