Voltage

Deploying Large Language Models (LLMs) directly on mobile platforms at the edge is gaining traction due to a myriad of benefits, such as increased privacy, personalization, and reduced latency. However, LLMs have heavy computational requirements, which are difficult for resource-constrained mobile and edge platforms to fulfill. In addition to limited compute resources, mobile and edge systems often have a compact form factor and lack physical mechanisms to dissipate heat generated from high processor usage rates (e.g., fans) to prevent throttling and reduced processing power, which LLMs can easily cause. To mitigate these effects, prior works have proposed various power governing strategies, such as dynamic voltage and frequency scaling (DVFS), for reducing power and heat generation for heavy computational tasks on mobile platforms. Recently, DVFS methods tailored for mobile LLMs have also been proposed. However, these methods mostly focus on optimizing hardware parameters and processor frequencies, and they fall short under some thermally constrained scenarios. Drawing from recent advances in machine learning, we identify and take advantage of the key insight that not all tokens require full-depth inference to maintain high-quality generation. Motivated by this, we present PELM, a solution that augments traditional DVFS processor frequency tuning with two additional workload-specific knobs: 1) speculative decoding and 2) variable verification depth to expand the optimization space to multiple dimensions for more power efficient on-device LLM inference. In extensive evaluations across hardware platforms and datasets, PELM demonstrates superior performance compared to state-of-the-art power governing methods, with up to 23.1% speedup and 52.4% reduction in energy consumption, while maintaining comparable task performance. The source code is available at https://github.com/imec-nu/PELM.

Deploying a new control policy for voltage control in active distribution grids requires evidence that physical limits will be satisfied before the policy is tested on the physical grid. This assessment is difficult for two reasons. First, simulations cannot capture every disturbance, modeling error, and device interaction present in the real grid. Second, historical measurements reflect operation under existing control policies, whereas a new policy may drive the grid into different operating conditions. To address these challenges, we propose Distributionally Robust Conformal Safety Screening (DR-CSS), a policy-agnostic framework for pre-deployment, scenario-by-scenario screening of a new control policy using historical data and a nominal simulator. For each new scenario, the simulator predicts a future voltage trajectory for the whole grid; DR-CSS then constructs a conformal safety interval around this prediction using historical simulation-to-reality errors. The interval is further enlarged to account for closed-loop changes induced by the deployment of the new policy and its interactions with the remaining controllers. To the best of our knowledge, DR-CSS is the first framework in power systems to combine historical data from an existing control policy with an imperfect simulator for pre-deployment safety screening of a new policy. Experiments on the IEEE 33-bus and IEEE 141-bus systems evaluate the deployment of learning-based voltage control policies and show that DR-CSS identifies all unsafe test scenarios. To reduce unnecessary warnings on safe scenarios, we adapt the safety intervals to different operating conditions and gradually introduce new policies with recalibration after each stage. These extensions increase the informational value of the safety screening and support safer deployment decisions in active distribution grids.

In this research, a novel framework is proposed for the SOH estimation, which employs a hybrid deep learning architecture of a concatenation of a Convolution Neural Network (CNN) and a Bidirectional Long Short-Term Memory (BiLSTM) Neural Network (NN) with the integration of Bayesian Optimization-based hyperparameter tuning for the network. Three different deep learning architectures are being evaluated: standalone recurrent models, CNN-RNN architectures and CNN-RNN combinations enhanced with intermediate Fully Connected (FC) layers. Among the three, the model with the intermediate FC layers demonstrated the highest predictive accuracy. A comprehensive feature engineering approach combines capacity (Q), voltage (V), Incremental Capacity Analysis (ICA), and Differential Voltage Analysis (DVA), with systematic evaluation of multiple combinations to identify the optimal input representation. To validate the proposed method, three publicly available datasets were utilized, ensuring reproducibility of the results, two from external sources and one developed by the author of this study using a unique experimental setup. The comparison study was performed using the Mean Absolute Error (MAE), the Root Mean Squared Error (RMSE) and the FLoating-point OPerations (FLOPs) as evaluation metrics.

Most existing seizure detection algorithms require extensive pre-processing of the data and rely on heuristic or currently unexplainable machine learning approaches. These approaches often struggle with balancing detection sensitivity and specificity in the presence of variable seizure morphologies, interictal epileptiform discharges, and artefacts. Here, we consider an alternative approach: our seizure detection algorithm, which is based on the concept of critical transitions and overcomes the aforementioned limitations. Specifically, we perform a receiver-operating-characteristic analysis to quantify the performance of our algorithm in terms of its agreement with expert annotations of seizure onset and offset times in the voltage recordings of seizure activity in epileptic rodents with different seizure morphologies. We demonstrate how performance depends on algorithm parameters and varies across different rodent recording sessions. We determine the optimal set of algorithm parameters for each recording session, with near expert-level performance achieved in most cases. Finally, we derive a single general set of algorithm parameters applicable across all recording sessions. The algorithm maintains its high performance in this general setting, demonstrating its versatility, robustness across varying seizure morphologies, and potential to complement machine learning algorithms.

Accurate State-of-Health estimation is essential for safe battery operation and cost-effective maintenance. Although numerous health indicators have been derived from constant-current (CC) and constant-voltage (CV) charging phases, their effectiveness under realistic cross-battery validation remains insufficiently studied. This work addresses this gap through a systematic comparison of CC-only, CV-only, and combined indicator sets using rigorous Leave-One-Battery-Out (LOBO) validation on the NASA battery aging dataset. Four CV-phase indicators and CC phase duration are evaluated individually and in combination. Results show that the combined CC+CV approach achieves the best performance (R2 = 0.874), confirming that CC and CV phases capture complementary degradation information. Moreover, a 119% performance gap is observed between standard 5-fold cross-validation and LOBO validation, indicating that conventional evaluation overestimates practical accuracy. Based on these findings, practical guidelines are provided for indicator selection under data and computational constraints.

Mobile devices increasingly rely on real-time NPU inference for camera and perception workloads. Under low-voltage conditions, however, a single inference can induce an instantaneous voltage droop in the power-delivery network, causing the power management integrated circuit to invoke dynamic voltage and frequency scaling (DVFS) and increase latency. We present a measurement study of this effect on a commercial smartphone. We show that aggressive operator fusion in a mobile NPU compiler can create monolithic superlayers whose concentrated execution produces large peak-current bursts. These bursts shift the DVFS-onset voltage upward and reduce the low-voltage operating margin. We further evaluate a practical black-box mitigation: a measurement-guided, pre-compilation graph rewrite that inserts barriers at selected peak-to-average power ratio hot spots to prevent harmful superlayer merging in the vendor NPU compiler. On Snapdragon 8 Gen 3 with MobileNetV4 at 768 x 768 resolution on ImageNet-1k, this method reduces peak current from 3.12 A to 1.94 A with 3.76% latency overhead, preserves stable latency deeper into the low-voltage regime, and shifts the inferred DVFS margin by approximately 173 mV.

This work presents a machine learning framework that leverages an autoencoder (AE) for the efficient modeling of FinFET. We first calibrated a BSIM-CMG model to generate a dataset of current-voltage (ID-VG) characteristics. This data was used to train an autoencoder that compresses full I-V curves into a low-dimensional latent space, which intrinsically encodes key device physics. A key innovation is the explicit incorporation of parameter such as drain to source voltage (VDS) as an input feature, enhancing the model ability to capture bias dependent variation. The trained model successfully reconstructs full I-V curves and directly extracts critical device metrics including threshold voltage (VTH), subthreshold slope (SS), and peak transconductance (gm). This approach demonstrates that data driven compact models, built from actual characterization data, can achieve high accuracy with minimal training data, providing a powerful tool for rapid device characterization, modelling and circuit level simulation.

Machine-learning screens for battery materials are trained and judged almost entirely against computed reference voltages, and those references carry their own systematic errors. We report a case in which this matters quantitatively: our own screening stack (a graph-network voltage screen, a prior-art triage layer, and a local PBE+U bench) fails pre-registered validation against experiment-anchored literature values. Verdict thresholds, failure modes, and the primary metric were committed before analysis. On an operator-audited set of known Na-ion cathodes (n = 6 after one documented exclusion; verdict unchanged at n = 7), the raw held-out mean absolute error was 0.67 V, the pre-registered conservative metric, the upper 95% confidence bound of the cross-validated bias-corrected error, was 1.09 V, and the residual was strongly voltage-dependent (r = -0.94), so no additive calibration is valid. On the two compounds where prediction, database reference, and experiment could all be compared, the Materials Project PBE+U reference sat about 0.54 V below measurement: the reference, not the model, dominated the error. A prior-art screen found at least 70% of the targeted Na substitution space already published. We retire the screen, bound what "verified" means for our DFT ledger, and pre-register a calibration audit of it against four benchmark Li couples.

Biophysical neuron models link measurements of neural activity to underlying cellular mechanisms. Yet, a central challenge is that the kinetics of many ion channels are poorly characterized, and practical simplifications -- omitting channels or reducing morphological detail -- introduce systematic gaps between model and biology. Bridging these gaps requires approaches that can flexibly discover unmodeled dynamics while preserving mechanistic interpretability. Here, we introduce a hybrid modeling framework that embeds neural ordinary differential equations into conductance-based biophysical models to capture unknown currents or mis-specified channel kinetics. By parameterizing the neural ODE in terms of voltage-dependent steady-state and time-constant functions, we recover interpretable gating dynamics directly from voltage recordings without assuming a functional form. We show that the hybrid model fits the gating kinetics of 2400 ion channel models and recovers unknown gating dynamics from single current-clamp recordings, generalizing to out-of-distribution stimulus regimes under realistic inputs and parameter misspecification. We also use our method to reduce a multicompartment model of a cortical neuron into a single-compartment hybrid model with a learned axial current, yielding up to an order of magnitude lower computational cost. Together, our results establish a plug-and-play framework for selectively replacing unknown components of conductance-based models with neural ODEs while preserving their mechanistic structure.

Operational disturbance monitoring in power networks requires decisions to be made from waveform windows as they arrive, rather than from completed records after the event. This study evaluates full-vector Wigner--Ville Distribution Slice (WVDS) spectra for sequential anomaly-onset detection in high-voltage grid-voltage waveforms. The approach keeps the bilinear midpoint interaction structure of the Wigner--Ville distribution and represents each 128-sample voltage window by a 128-dimensional slice spectrum, avoiding manually selected fault-frequency markers. WVDS is used with a baseline-normalized deviation (BND) score and is compared against the BND of Fast Fourier Transform (FFT-BND), raw-window autoencoders, FFT autoencoders, and WVDS autoencoders under the same thresholding and three-window persistence rule. A synthetic autoencoder--clustering teacher is used to select RTE fault records that start from an initially normal region and then transition to anomalous behavior. On the filtered test set, FFT-BND achieves the highest sensitivity, whereas WVDS-BND provides the lowest false-alarm operating point, reducing record-level pre-onset false alarms to 0.69%. The autoencoder comparison follows the same selectivity pattern: WVDS reconstruction decreases false alarms relative to FFT reconstruction but misses more examples. The results indicate that preserved WVD cross-term information can form a selective representation for online grid-waveform anomaly monitoring when false alarms are costly.

Humans often take longer to demonstrate a task than a robot would need to execute it. Rather than learning to replicate the demonstration at the same pace, many industrial and practical applications require robots to perform tasks as quickly as possible. In this paper, we investigate several hypotheses for learning policies that operate faster-than-demonstrations. Our experiments show that the most effective strategy is to downsample recorded demonstrations and train the robot's policy on this accelerated data. However, uniformly downsampling an entire trajectory can be problematic. Some parts of a task can be safely sped up (e.g., unconstrained motion), while others demand slower, more precise motion (e.g., object interactions or fine manipulation). To address this challenge, we introduce VOLT, a vision-and-language trajectory segmentation method that reasons over video demonstrations, and leverages contextual cues to determine when acceleration is appropriate and when careful precision is required. VOLT identifies segments where slow, deliberate motion is necessary, then selectively downsamples the remaining segments. The resulting reformatted trajectories can be used with standard imitation learning approaches, such as diffusion policies. Our results highlight that segmentation quality is critical -- baseline methods often misidentify when acceleration is possible, leading to overly cautious or unreliable policies. Compared to state-of-the-art alternatives, VOLT allows robots to execute tasks faster while maintaining strong performance.

Unscheduled trips of high-power pulsed converters are a leading source of downtime at large accelerator facilities. At the Spallation Neutron Source (SNS), the High Voltage Converter Modulators (HVCMs) are consistently the second-largest contributor to lost beam time. Each HVCM pulse is recorded across sensor channels spanning currents, voltages, and magnetic fluxes, whose mutual interactions encode the operating state of the system. Fault precursors do not manifest uniformly across these channels: depending on fault type, they may alter the temporal structure of individual signals, change the statistical dependencies among channels, or both. Existing deep-learning approaches typically process multi-channel signals with standard convolutional pipelines that entangle temporal and cross-channel operations from the first layer, giving the model no explicit mechanism to represent channel independence or structured inter-channel interaction. We hypothesise that architectural inductive bias, specifically the ordering of temporal filtering and cross-channel mixing, plays a central role in detection performance on this class of data. To test this, we vary the order in which these two operations are applied, and examine whether per-pulse adaptive channel reweighting further improves sensitivity. Evaluated on the public HVCM dataset across all four SNS subsystems (RFQ, DTL, CCL, SCL), our best variant achieves a pooled AUC-PR of 0.816 and AUC-ROC of 0.934, outperforming the state of the art on most subsystems and five of the six fault families. Ablations identify three dominant input channels and link per-fault-family performance to whether precursors manifest as amplitude shifts in individual channels or as subtler patterns requiring joint channel representations to surface.

Estimating CPU power on heterogeneous ARM-based commodity devices is challenging due to limited access to CPU's voltage domains. As a result, state-of-the-art energy-aware Federated Learning (FL) frameworks typically rely on simplified approximate power models to estimate computation energy, rather than the more accurate analytical CMOS-based model. To bridge this gap, we propose a reproducible CPU power estimation methodology combined with a rail-to-cluster mapping technique to retrieve cluster-level supply voltage. We evaluate our approach on two commodity Android devices and show that the analytical model predicts CPU power with errors below 10%, whereas the approximate model incurs errors of up to 959%. Using AnycostFL, a state-of-the-art energy-aware FL framework, we show that the analytical model achieves the same 80% model accuracy while consuming 1.4x less energy than the approximate model. These results highlight that approximate models can severely misestimate computation energy and lead to suboptimal decisions. This work facilitates the use of analytical CPU power models on heterogeneous multi-cluster ARM-based mobile SoCs without additional hardware support or external power measurement tools.

The growing use of fast-switching power electronics has made partial discharge (PD) analysis under switching-voltage excitation increasingly important, yet more challenging than under sinusoidal conditions due to activity concentrated at voltage transitions. This work presents an Amplitude-Width-Area (AWA) pattern representation for source-oriented PD analysis under switching-voltage excitation. In the proposed method, time domain PD pulses are characterized using pulse amplitude, width, and area, and mapped into a visual pattern where amplitude and area define the coordinate axes and width is encoded by color. The generated AWA patterns are used to distinguish six single and mixed PD source conditions: corona, internal, surface, corona+internal, corona+surface, and internal+surface. To evaluate the classification capability of the proposed representation, a Random Forest baseline and two Convolutional Neural Network (CNN) models, InceptionV3 and ResNet-18, are compared. The AWA patterns show distinguishable source-dependent distributions, and CNN-based classification achieves testing accuracy above 96%, compared with 73.33% for Random Forest. The results indicate that AWA patterns provide a visual representation of PD pulses suitable for multi-class PD source classification under switching-voltage excitation.

Automated vulnerability detection is a fundamental task in software security, yet existing learning-based methods still struggle to capture the structural dependencies, domain-specific vulnerability knowledge, and complex program semantics required for accurate detection. Recent Large Language Models (LLMs) have shown strong code understanding ability, but directly prompting them with raw source code often leads to missed vulnerabilities or false alarms, especially when vulnerable and benign functions differ only in subtle semantic details. To address this, we propose VulTriage, a triple-path context augmentation framework for LLM-based vulnerability detection. VulTriage enhances the LLM input through three complementary paths: a Control Path that extracts and verbalizes AST, CFG, and DFG information to expose control and data dependencies; a Knowledge Path that retrieves relevant CWE-derived vulnerability patterns and examples through hybrid dense--sparse retrieval; and a Semantic Path that summarizes the functional behavior of the code before the final judgment. These contexts are integrated into a unified instruction to guide the LLM toward more reliable vulnerability reasoning. Experiments on the PrimeVul pair test set show that VulTriage achieves state-of-the-art performance, outperforming existing deep learning and LLM-based baselines on key pair-wise and classification metrics. Further ablation studies verify the effectiveness of each path, and additional experiments on the Kotlin dataset demonstrate the generalization ability of VulTriage under low-resource and class-imbalanced settings. Our code is available at https://github.com/vinsontang1/VulTriage

Line current differential relays (LCDRs) are measurement-driven relays that rely on time-synchronized multi-phase current waveforms to infer internal faults in AC and DC power networks. In inverter-based microgrids, however, the increasing reliance on digitally communicated measurements exposes LCDRs to false-data injection attacks (FDIAs), in which adversaries manipulate remote measurement streams to create protection-triggering yet physically inconsistent current trajectories. This paper addresses this emerging measurement integrity problem by introducing a measurement integrity validation scheme that operates as a supervisory instrumentation layer for modern LCDRs. The proposed scheme interprets short windows of synchronized instantaneous current measurements recorded during relay operation and assesses their physical consistency to distinguish genuine fault-induced trajectories from cyber-manipulated measurement streams. A recurrent neural network is trained offline using only relay-available current measurements and exploits the temporal structure of differential current waveforms, which remains informative in inverter-dominated systems where current magnitude is no longer a reliable observable. The method requires no additional sensors, auxiliary protection elements, or prior knowledge of network topology, and is applicable to both AC and DC LCDRs without structural modification. The proposed measurement validation scheme is evaluated on an islanded inverter-based microgrid under a comprehensive set of fault and FDIA scenarios, demonstrating high detection accuracy while preserving relay dependability. Hardware-in-the-loop validation using an OPAL-RT real-time simulator confirms that the scheme satisfies protection timing constraints and can operate in real time under realistic operating conditions.

The widespread use of sensors in modern power grids has led to the accumulation of large amounts of voltage and current waveform data, especially during fault events. However, the lack of labeled datasets poses a significant challenge for fault classification and analysis. This paper explores the application of unsupervised clustering techniques for fault diagnosis in high-voltage power systems. A dataset provided by the Réseau de Transport d'Électricité (RTE) is analyzed, with frequency domain features extracted using the Fast Fourier Transform (FFT). The K-Means algorithm is then applied to identify underlying patterns in the data, enabling automated fault categorization without the need for labeled training samples. The resulting clusters are evaluated in collaboration with power system experts to assess their alignment with real-world fault characteristics. The results demonstrate the potential of unsupervised learning for scalable and data-driven fault analysis by structuring large unlabeled waveform datasets and supporting targeted expert review.