Radio Propagation Modeling

Follow this topic Ask about this topic

Momentum

3 papers in the last four weeks, down 25% on the four weeks before. 0.0% of all new papers.

Jul 13Week of Sep 28

Latest papers 36

Oct 5, 2026cs.LG

LiLib: Lifelong Air-to-Ground Path-Loss Prediction on UAVs via a Drift-Triggered Model Library

UAVs that act as relays or base stations need accurate air-to-ground path-loss predictions for rate adaptation and placement, but propagation conditions change as a UAV moves between suburban, urban and high-rise areas, and the same areas are often revisited. Online regressors that adapt by forgetting must relearn each environment from scratch, whereas a single model trained on all data averages incompatible regimes. We propose LiLib, a lightweight continual-learning scheme in which a UAV maintains a small library of recursive-least-squares experts. A windowed residual test detects drift; a short probe phase then either reuses the best stored expert or creates a new one. In simulations based on four standard urbanization profiles, LiLib reduces prediction RMSE from 5.89 dB (best sliding-window baseline) to 4.03 dB (p < 0.001), lowers the error shortly after a return to a known environment from 12.3 dB to 5.7 dB, and recovers 99% of the throughput of a regime-aware oracle in rate adaptation. The library stores four experts in under 0.5 KB, and identifies regimes with 92% purity without labels. When a second UAV is initialized with the library of a peer, its error after environment changes halves. LiLib does not reach the oracle, and similar regimes may be merged when shadowing is strong. The results indicate that, for recurring drift, remembering is more effective than re-adapting.

Minh Tran

Hanoi University of Science and Technology (HUST), Hanoi, Vietnam

Concept Drift Wireless Communications Radio Propagation Modeling Online Continual Learning

Sep 26, 2026cs.AI

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc

Department of Electrical and Computer Engineering, North Carolina State University, Raleigh, NC · Radio Systems Research, Nokia Bell Labs, Murray Hill, NJ, USA

Radio Propagation Modeling Digital Twins

Sep 10, 2026eess.SP

Rethinking Radiomap Blind Prediction with Limited Environment and Configuration Representations

Radiomap blind prediction infers radiomaps from observable representations of the propagation environment and base station (BS) configuration without field measurements. These representations are inherently incomplete and cannot uniquely determine the target radiomap. Under squared loss, we identify the conditional-mean radiomap as the population-optimal deterministic target and decompose domain risk into target-approximation error and irreducible uncertainty. The train-test risk gap motivates propagation priors as cross-domain guidance, although their partial or simplified forms may bias the attainable predictor. We therefore propose RadioDecomp, which treats a prior-guided predictor as a correctable base and uses deterministic residual refinement to learn its remaining predictable discrepancy. We instantiate RadioDecomp as RadioLSR (LoS-Shadow-Residual). Experiments under cross-configuration and cross-environment settings show that RadioLSR is especially effective for cross-configuration generalization and provides overall gains over a controlled monolithic counterpart under cross-environment generalization.

Xiaojie Li, Yu Han, Han Fang +3

School of Information Science and Engineering, Southeast University, Nanjing 210096, China · National Mobile Communications Research Laboratory, Southeast University, Nanjing 210096, China · School of Cyber Science and Engineering, Southeast University, Nanjing 210096, China +2

Residual Learning Cross-Domain Generalization Radio Propagation Modeling

Sep 7, 2026cs.CV

KODAMA: Multimodal Digital Twin Reconstruction for Urban RF Propagation Modelling

3D reconstruction typically strives for geometric fidelity or visual plausibility. Radio frequency digital twins (RFDT) are instead judged by whether communication channels behave in them as they do in the real world. RFDTs promise site-specific channel prediction but current practice forces a choice between coarse automated scenes and hand-built, measurement-calibrated models that take weeks to construct per-site. We present KODAMA, an automated pipeline that reconstructs ray tracing-ready RFDTs at city scale from off-the-shelf geospatial data alone: aerial imagery, LiDAR, and photogrammetry yield terrain and watertight building meshes, while exposure-weighted multi-view fusion of street-level imagery recovers façade relief, electromagnetic materials, and clutter---all without site visits or calibration. Across three sites spanning 3.6 to 28 GHz, KODAMA's uncalibrated predictions achieve single-digit RMSE, reducing point-to-point error by up to 5.35 dB over automated baselines and coming within 0.22 dB of a measurement-calibrated, hand-built RFDT.

Maximiliano Wardle, A. Ryo Koblitz

Nokia Bell Labs · University of York

3D Reconstruction Radio Propagation Modeling Digital Twins

Sep 1, 2026cs.LG

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

Mingjie Zhu, Ziming Yu, Guangjian Wang +1

Terahertz Wireless Communications (TWC) Interdisciplinary Research Center, Shanghai Jiao Tong University, Shanghai 200240, China · Huawei Technologies Company Ltd., Chengdu 611731, China · Terahertz Wireless Communications (TWC) Interdisciplinary Research Center, and Cooperative Medianet Innovation Center (CMIC), School of Information Science and Electronic Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Wireless Communications Radio Propagation Modeling Digital Twins

Sep 1, 2026eess.SP

BeamRMX: Radiation-Pattern-Driven Learning for Generalizable Beam Radio Map Prediction and Beam Management

The evolution toward sixth-generation (6G) wireless networks is driving larger antenna arrays and highly directional multi-beam transmission, making accurate knowledge of beam-dependent spatial coverage important for beam management and environment-aware network operation. Radio maps (RMs) provide such a representation, yet conventional RM prediction assumes omnidirectional or transmitter-level radiation. In beamformed multiple-input multiple-output (MIMO) systems, one propagation scene instead gives rise to many configuration-dependent beam radio maps (BeamRMs), creating challenges in beam representation and generalization. Existing methods either condition prediction on beam descriptors or use beam maps as auxiliary inputs to generic architectures. We propose BeamRMX, which, to the best of our knowledge, is the first dedicated framework to treat the spatial radiation pattern as the primary BeamRM query and learn how scene geometry transforms it into the received power field. XBase learns multiscale interactions between the radiation query and scene geometry, while an optional Evidence Adapter uses a few cross-configuration BeamRMs from the same scene. Matched-domain and zero-shot experiments show consistent gains over deterministic and diffusion baselines, including mean absolute error reductions of 26.1% on unseen scenes and 47.8% on an unseen configuration. Cross-configuration evidence further improves reconstruction and intra-sector beam refinement.

Yue Zhang, Xiucheng Wang, Wenshuo Chen +1

State Key Laboratory of ISN and the School of Telecommunications Engineering, Xidian University, Xi’an 710071, China · The Hong Kong University of Science and Technology (Guangzhou), Guangzhou 511453, China

6G Networks Radio Propagation Modeling

Aug 11, 2026cs.NI

A Systematic Sample Size Analysis of ML-Based Path Loss Prediction for LPWAN

Low Power Wide Area Networks like LoRa are increasingly deployed for smart city applications, requiring accurate path loss prediction for effective network planning. Traditional (empirical) propagation models often exhibit limited accuracy in these scenarios. We investigate machine learning models for LoRa path loss prediction, systematically analyzing how prediction accuracy scales with training set size using real-world measurements from an urban deployment. Our approach employs a Random Forest with LiDAR-derived terrain features and k-Nearest Neighbors with coordinate data, comparing their performance against established empirical models and specialized LPWAN models. Under random pooled splits, both ML models consistently outperform the considered baseline models across the evaluated training-set sizes. At maximum training size, they achieve RMSE values below 6.5 dB compared to 9.7 dB for the best baseline, indicating accurate within-deployment interpolation. A leave-one-gateway-out check qualifies this result: RF shows placement-dependent transfer to held-out gateways, with moderate degradation for several gateways but larger errors for others, whereas coordinate-only k-NN degrades substantially when the gateway location is unseen

Robert Bitterling, Christian Nettersheim, Jörn Hees +1

Fraunhofer FKIE · Hochschule Bonn-Rhein-Sieg Cyber Analysis & Defense Department of Computer Science Wachtberg, Germany

Wireless Communications Radio Propagation Modeling

Aug 10, 2026cs.CV

ControlRadio: Prompt-Driven Controllable Diffusion for Cross-Modal Radio Map Generation

Radio maps describe how wireless signals propagate across space and are essential for wireless communication, sensing, and network planning. However, constructing accurate radio maps traditionally requires either dense measurements or computationally expensive physical simulations, which limits scalability and real-time deployment. Recent advances in generative artificial intelligence offer a promising alternative, but existing approaches lack fine-grained control and physical consistency when applied to real-world wireless environments. Here we present \textbf{ControlRadio}, a controllable generative framework that produces radio maps from natural-language descriptions and environmental layouts, including building structures and transmitter locations. Joint semantic and spatial conditioning enables interpretable, propagation-plausible generation, while a controlled latent prior and layout-aware conditioning improve stability and structural consistency. Extensive experiments demonstrate that ControlRadio achieves state-of-the-art accuracy and strong generalization across diverse urban scenarios, while reducing computation time by more than four orders of magnitude compared with conventional simulation-based methods. Such results suggest a new paradigm for scalable and controllable wireless environment modeling, with broad implications for next-generation communication systems and data-driven radio sensing.

Kangjun Liu, Xiying Pan, Shuhang Zhang +3

Pengcheng Laboratory, China · South China University of Technology and the Pengcheng Laboratory, China · Peking University, China +2

Wireless Communications Generative Modeling Radio Propagation Modeling Conditional Generative Modeling Diffusion Models

Aug 6, 2026cs.AI

GSBF: Gaussian Splatting for Environment-Aware Beamforming

Beamforming plays a key role in multiple-input-multiple-output (MIMO) communication systems. However, conventional beamforming design normally requires accurate instantaneous channel state information (CSI) and iterative optimization, which incur substantial pilot overhead and computational complexity. Recognizing that radio propagation is intrinsically governed by the physical geometry, we develop a 3D Gaussian splatting for environment-aware beamforming (GSBF) pipeline based on multi-modal data, which characterizes the environment through a persistent 3D Gaussian representation. Specifically, GSBF models the environmental scattering response with reciprocity-preserving bidirectional spherical Gaussian (Bi-SG) kernels and performs two-sided electromagnetic rasterization to render an angular propagator map. The rendered map is then aggregated through an over-complete array-manifold dictionary and projected to the constant-modulus beamformers, thereby synthesizing beams directly from the access point (AP) pose and user position without online instantaneous CSI. Simulations demonstrate that GSBF consistently outperforms baselines such as exhaustive beam alignment (EBA) with lower latency.

Yijie Bian, Wei Guo, Zixin Wang +3

Dept. of ECE, The Hong Kong University of Science and Technology, Hong Kong, China

3D Gaussian Splatting Wireless Communications Radio Propagation Modeling

Aug 5, 2026cs.LG

MultiPathFormer: Towards a Foundation Model for Multipath Wireless Propagation

Recent advances in machine learning have enabled training of wireless foundation models, which aim to support tasks such as channel estimation, beam prediction, and localization based on wireless signals. Existing wireless foundation models typically pretrain on channel tensors using masked reconstruction over subcarriers, antennas, or time but ignore the physical characteristics of wireless propagation. In this work, we propose to instead use multipath propagation as the fundamental pretraining object. We present MultiPathFormer, an autoregressive foundation model that represents each transmitter-receiver link as an ordered sequence of continuous-valued path tokens and pretrains with next-path prediction. We introduce an Environmental RAG (retrieval-augmented generation) mechanism and a first-path codebook on top of the transformer backbone, leveraging environment knowledge to improve path statistics estimation like delay and power by up to 59%. MultiPathFormer pretrained on 27 environments transfers to unseen users and, after scenario-specific fine-tuning, outperforms training the corresponding models from scratch in new environments. Across downstream tasks, it outperforms SOTA channel-based foundation models, achieving 5.57 m mean localization error, 0.914 top-3 beam accuracy, 0.994 line-of-sight classification accuracy, and 0.561 channel estimation NMSE. These results show that path-level pretraining can learn reusable representations of wireless propagation.

Blessed Guda, Kayley Sze, Carlee Joe-Wong

Carnegie Mellon University Pittsburgh, USA

Wireless Foundation Models Wireless Localization Radio Propagation Modeling Channel Estimation

Jul 31, 2026eess.SP

Generative Models for Modeling and Synthesizing MIMO Channels in Adverse Weather Conditions

The push for broader coverage in future cellular networks depends on reliable service, yet this is increasingly harder to do as we encounter more instances of extreme weather conditions. In extreme weather conditions, we have difficulty evaluating coverage due to limited access to channel measurements. In this paper, we generate channel state information (CSI) in low and moderate weather conditions to synthesize realistic MIMO CSI under adverse weather conditions. Our primary contributions are to (1) synthesize MIMO channel datasets incorporating three weather types, each with three intensity levels, representative of practical 5G/6G scenarios; (2) train a diffusion model conditioned on weather using channel samples obtained through conventional pilot-based estimation under low and moderate weather intensities, and subsequently use it to generate channel realizations for severe weather conditions; and (3) evaluate the downlink Bit Error Rate (BER) and Outage Probability measures using the generated channels. The results show that diffusion-based generative models provide a scalable, data-driven alternative for channel modeling in harsh environments and can generalize to severe weather conditions using only low- and moderate-intensity training data.

Vignesh Nandakumar, Faraz Barati, Brian L. Evans

Synthetic Data Generation Wireless Communications Radio Propagation Modeling

Jul 31, 2026cs.NI

Point2Radio: A Foundation Model for Cross-Scene Radio Fields from Material-Aware Point Clouds

High-fidelity radio fields are typically simulated for every scene--transmitter configuration or fitted separately to each scene, failing to exploit propagation structures shared across environments. We present Point2Radio, a foundation model that learns a transferable propagation prior from multiple environments. Given a material-aware point cloud and a transmitter (TX) setting, a common encoder produces a TX-conditioned scene representation that can be queried at arbitrary receiver (RX) locations. Task-specific query decoders map this representation to different radio quantities, e.g., three-dimensional (3D) path-gain (PG) fields and power angular spectra (PAS). At inference for a new scene, the model uses only a material-aware point cloud and transceiver queries, running in milliseconds on a single GPU without meshes or explicit path tracing. We evaluate PG prediction on a scene-disjoint split of a 337-scene corpus containing 86,272 TX-conditioned fields. Point2Radio achieves 0.871 dB mean absolute error (MAE), reducing error by 76.7% relative to a same-split UNet-style baseline. The same encoder also supports PAS prediction via a task-specific decoder. Experiments further show that light target-scene fine-tuning improves adaptation to a specific environment.

Chaozheng Wen, Chenghong Bian, Hongze Chen +1

Hong Kong University of Science and Technology

Wireless Foundation Models Wireless Communications Radio Propagation Modeling

Jul 30, 2026cs.CV

mmRadarTwin: A Measurement-Calibrated Signal-Level Digital Twin Platform for Indoor mmWave Radar

Indoor mmWave radar perception is difficult to reproduce because measured range-angle responses depend on scene geometry, material response, multipath, hardware conventions, and signal processing. Existing ray-tracing and digital-twin tools often expose rendering, channel, or path-level quantities, while radar sensing requires complex signal products that can be processed and compared in the same domain as real FMCW measurements. We present mmRadarTwin, a signal-level and path-attributed digital-twin platform for indoor mmWave radar. mmRadarTwin links a real radar measurement branch with an Unreal Engine scene-simulation branch through a shared receive-channel and range-angle processing interface. The simulator writes complex multi-channel receive grids and exports per-path contribution records that identify the actor, material tag, propagation event, and output-bin support of each simulated return. We evaluate mmRadarTwin in an office deployment using a commodity monostatic mmWave radar and mobile scene-capture hardware. Across 154 measured poses spanning 22 radar locations, the current physics-only path-basis simulator recalls 70.8% of measurement-active geometry-supported response regions in the central usable field of view while exposing residuals caused by weak or missing path support, shifted responses, unsupported anchors, and missing physical mechanisms. Rather than claiming complete radar-map reconstruction or cross-room generalization, mmRadarTwin establishes a practical systems workflow for constructing, comparing, and diagnosing indoor radar digital twins.

Jianyi Zhou, Chenghao Zhang, Yanli Li +1

The University of Sydney · Sydney, NSW, Australia

Millimeter-Wave Radar mmWave Radar Sensing Active Sensing Radio Propagation Modeling Digital Twins

Jul 30, 2026eess.SP

SymNet: A Multi-Task Network for Joint Radio Map Reconstruction and Transmitter Localization

Accurately predicting directional radio maps is essential for wireless applications, yet prior approaches primarily focus on omnidirectional signals and typically treat transmitter localization and signal map reconstruction as separate tasks. In omnidirectional settings, predicting the maximum signal location often coincides with the transmitter position, which limits the need for explicit joint modeling. However, in directional propagation where angular effects, reflections, and building occlusions play critical roles, this assumption no longer holds. To address this gap, we propose SymNet, a unified framework that jointly predicts directional radio maps and transmitter locations from sparse signal measurements. SymNet incorporates a prediction head for transmitter localization alongside radio map reconstruction, enabling simultaneous learning of both tasks. This joint formulation leverages their complementary information and leads to consistent improvements over treating them separately. Experiments on challenging directional scenarios demonstrate that SymNet outperforms state-of-the-art baselines, achieving superior accuracy in both radio map reconstruction and transmitter localization.

Lyuzhou Ye, Thanh Dat Le, Yan Huang

University of North Texas 1155 Union Circle Denton, Texas

Multi-Task Learning Wireless Communications Wireless Localization Radio Propagation Modeling

Jul 28, 2026eess.SP

CORF-GS: Real-Time Wireless Radiance Field Reconstruction via Coupled Optical-RF Gaussian Splatting

Recent advances in 3D Gaussian Splatting (3DGS)-based wireless radiance field (WRF) reconstruction provide an efficient solution for wireless channel modeling. However, existing WRF reconstruction methods rely on pre-collected observations and offline optimization, and thus struggle to provide real-time channel knowledge. To bridge this gap, we propose CORF-GS, a real-time WRF reconstruction framework that processes sequential optical and radio frequency (RF) keyframes. Specifically, CORF-GS constructs a unified Gaussian representation for optical and RF with shared geometry and modality-specific appearance, allowing high-resolution optical images to provide structural priors for WRF reconstruction. When a new keyframe arrives, CORF-GS first employs optical-guided Gaussian sampling to densify the WRF in under-represented regions. Since light and radio waves may respond differently to the same object surfaces due to wavelength mismatch, relying solely on optical guidance may neglect RF-informative areas. Therefore, CORF-GS performs coupled optical-RF optimization to jointly refine the shared Gaussians. Compared with the existing two-stage training pipelines, this prevents WRF from passively adapting to a frozen optical geometry and encourages the shared Gaussians to adapt to both optical structures and RF power distributions. Simulations show that CORF-GS achieves state-of-the-art RF spectrum synthesis quality and reduces the reconstruction time by

6.4\times

compared with existing WRF methods.

Jinya Zhang, Jiajia Guo, Chao-Kai Wen +1

3D Gaussian Splatting Streaming 3D Reconstruction Radio Propagation Modeling Multimodal Sensor Fusion Neural Radiance Fields

Jul 24, 2026cs.CV

Low-Altitude Channel Multipath Prediction via Panoramic Perception and Vision-Language Model

Unmanned aerial vehicle (UAV) communication is expected to support a wide range of low-altitude applications in 6G mobile networks. However, traditional statistical channel models provide limited accuracy in specific environments, while deterministic methods such as ray tracing usually rely on accurate three-dimensional environment models and involve high computational complexity. Existing multimodal channel prediction approaches mainly focus on large-scale metrics such as path loss, and remain insufficient for modeling small-scale parameters. To address these limitations, this paper proposes PanoLAMP, a Panoramic perception and vision-language model-based Low-Altitude Multipath Prediction framework. It adopts a pretrained vision-language model as the backbone and captures the propagation environment features through panoramic RGB-D observations collected at both the transmitter and receiver to predict the delay, power, azimuth angle, and zenith angle offset relative to the line-of-sight path. Experiments are conducted on a synthetic dataset containing 18,949 UAV-vehicle links across seven UAV altitudes. Experimental results show that the proposed method consistently outperforms representative baselines in both multipath parameters and statistical metrics, and demonstrates stronger generalization across different flight heights.

Zihang Zeng, Shu Sun, Meixia Tao +3

School of Information Science and Electronic Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Wireless Communications Radio Propagation Modeling

Jul 17, 2026cs.LG

EA-RMENet -- Path Loss Prediction in Urban Environments using Deep Learning

Accurate path loss prediction is a critical component of wireless network planning. Current path loss prediction methods typically struggle to balance the trade-off between accuracy and computational efficiency. This paper proposes the Efficient Attention Radio Map Estimation Network (EA-RMENet) which is an image data-driven, deep learning (DL) model designed for radio map estimation (RME). EA-RMENet uses a U-Net framework with an EfficientNetB5 encoder, Attention Gated (AG) skip connections, and Atrous Spatial Pyramid Pooling (ASPP). The EfficientNet encoder uses compound scaling to balance accuracy and efficiency. AG skip connections suppress irrelevant features, and the ASPP captures a multi-scale context. The model has a test prediction RMSE of 0.0334 on the RadioMapSeer3D dataset with an inference time of 0.022 seconds/sample. In the ICASSP 2023 Radio Map Prediction Challenge, the model ranks third with a competitive RMSE of 0.0406 this highlights the models potential for real-world RME.

Jonathan O'Shea, Conor Brennan

DCU School of Electronic Engineering

Radio Propagation Modeling Dense Prediction

Jul 17, 2026cs.CV

HybridSim: A Physics-Learning Hybrid Digital Twin for mmWave Human Sensing

High-fidelity simulation of mmWave radar signals for dynamic human motion is valuable for developing radar-based human sensing models; yet collecting accurately labeled measurements for a specific deployment site remains expensive. We present HybridSim, a physics-learning hybrid simulator that synthesizes mmWave radar signals from dynamic human meshes under a fixed indoor room configuration, explicitly decoupling propagation into two components. To parameterize the human subject, we use a tri-plane representation to extract human features and a Graph Convolutional Network to stabilize optimization and mitigate gradient instability. The direct signal path is modeled via an inverse-rendering formulation with a microfacet BRDF to capture primary surface reflections. In parallel, the indirect path is approximated by combining 3D Gaussian Splatting with a virtual-receiver geometry to fit and reproduce site-specific multipath interference patterns, achieving substantially lower computational cost than explicit full ray tracing. Experiments in a fixed-room setting show improved agreement with a physically based reference and consistent gains on downstream radar-based human sensing tasks when using HybridSim for site-specific data augmentation.

Weitao Xiong, Tianyu Liu, Peng Li +4

1Xiamen University Malaysia · 2The Hong Kong University of Science and Technology · University of North Carolina at Charlotte

Synthetic Data Generation Millimeter-Wave Radar mmWave Radar Sensing Radio Propagation Modeling Digital Twins Physics-Based Simulation

Jul 16, 2026cs.AI

CFM-Bench: A Unified Multi-Domain, Multi-Task Benchmark for Channel Foundation Models

Channel foundation models (CFMs) are developing rapidly, with recent studies reporting benefits from pretraining across downstream wireless tasks. Yet CFMs are commonly evaluated in model-specific pipelines with different data, radio configurations, partitions, adaptation procedures, task definitions, and metrics. Reported comparisons therefore tend to show that pretraining improves over supervised training from scratch within one pipeline, but neither rank CFMs nor compare them fairly with task-specific models. We release CFM-Bench, a unified multi-domain, multi-task benchmark designed to address this gap. It curates six channel configurations spanning 3GPP statistical simulation, two independent ray-tracing pipelines, industrial and aerial measurements, and synchronized vehicular multimodal simulation. Official partitions isolate complete trajectories, measurement sessions, vehicle links, simulation realizations, or buffered spatial regions. CFM-Bench does not prescribe an external pretraining corpus or strategy; no benchmark split may be used for foundation-model pretraining, and the official training split is reserved exclusively for downstream fine-tuning. The benchmark additionally requires disclosure of all data used during model development and prohibits training-stage use of official test units. Six task groups are organized along three CFM application dimensions: physical-layer (PHY) channel intelligence, radio-access-network (RAN) decision intelligence, and integrated sensing and communication (ISAC). They cover CSI feedback, frequency and temporal channel extrapolation, propagation-state classification, current- and future-beam prediction, and single-frame and temporal localization. CFM-Bench provides a common substrate for comparing the transferability of channel representations across models, domains, and tasks.

Yuan Gao, Wenjun Yu, Jun Jiang +3

School of Communication and Information Engineering, Shanghai University, Shanghai, China · Xi’an Jiaotong-Liverpool University, Suzhou, China

Wireless Foundation Models Benchmark Design Wireless Communications Radio Propagation Modeling

Jul 13, 2026cs.LG

Physics-Aware Conditional SetGAN for Spatially Consistent Multi-User TR 38.901 Channel Generation

TR 38.901-based channel models such as Sionna are reliable, but generating many multi-user channel realizations remains expensive. This paper asks a practical question: can a trained generative model produce multi-user TR 38.901 channels faster than Sionna without losing the spatial correlations imposed by user geometry? To answer this question, we propose a physics-aware, geometry-conditioned SetGAN trained on Sionna reference data. The method separates large-scale received power from normalized small-scale fading, compresses the latter with principal component analysis, and learns the conditional channel distribution in a latent space while preserving geometry-dependent correlations. On the UMa/NLoS benchmark, the model keeps the received-power distributions close to the reference, with about 0.41 dB Wasserstein distance, and reproduces spatial-consistency profiles with mean deviations below 0.03 on median curves versus distance. In addition, it reduces elapsed generation time by a factor of 3.45 and CPU-total cost by a factor of 6.15 relative to Sionna under matched user positions in the fixed-position CPU-vs-CPU benchmark. These results show that a trained generative model can substantially accelerate TR 38.901 channel generation without breaking the spatial consistency needed to evaluate multi-user systems.

Mauro Gonzalo Tarazona-Levano, David Lopez-Perez, Nicola Piovesan +1

Institute of Telecommunications and Multimedia Applications (iTEAM), Universitat Politècnica de València (UPV), Spain · Beihang Valencia Polytechnic Institute (BVPI), China · Huawei Technologies, France

Wireless Communications Radio Propagation Modeling Conditional Generative Modeling Generative Adversarial Networks

Jul 9, 2026cs.IT

RadioDiff-v2: Generative Angular Radio Maps for Multi-Beam Selection and Localization

Angular radio maps describe the received-power distribution over the angle of arrival and underpin beam selection and receiver localization in sixth-generation (6G) networks. Predicting the angular power spectrum (APS) from geometry is difficult, because the mapping is ill-posed in non-line-of-sight (NLOS) conditions and must generalize to unseen environments. Distortion-minimizing regressors return the conditional mean, which over-smooths the spectrum and erases the multipath structure that downstream tasks need. We cast the task as a perception-distortion problem and propose RadioDiff-v2, a dual-branch one-dimensional diffusion transformer trained with flow matching. It couples periodic angular encoding, adaptive layer-normalization conditioning, a Fourier angular mixer, and joint velocity and clean-signal heads. A per-metric estimator portfolio reads every deployment quantity from this single model, so that samples carry the distribution, the clean-signal head supplies a regression-grade point estimate, Bayes-optimal rules select beams, and the conditional likelihood localizes the receiver. We prove that a concentrated conditional yields a straight probability-flow trajectory that one step integrates exactly, identifying deterministic transport as the correct inductive bias. On a zero-shot test of 99 environments and one million links, RadioDiff-v2 leads every baseline on every metric, with a 0.39 dB Wasserstein-1 distance, per-bin error below the regression baseline, a 2.43 dB eight-beam NLOS sweep loss, and a 20.6-pixel localization error with four base stations. Code is available at https://github.com/UNIC-Lab/RadioDiff-v2.

Xiucheng Wang, Junxi Huang, Nan Cheng

State Key Laboratory of ISN and School of Telecommunications Engineering, Xidian University, Xi’an 710071, China

Diffusion Transformer 6G Networks Wireless Localization Radio Propagation Modeling Map-Based Localization

Jul 2, 2026eess.SP

Scene-Conditioned PINN-GNN for Multipath RF Maps: Cross-Scene Generation and In-Scene Completion

Radio frequency (RF) maps provide a compact representation of multipath propagation characteristics and are fundamental to channel modeling, coverage analysis, and environment-aware wireless optimization. This paper proposes a unified RF map construction framework based on a physics-informed neural network (PINN) and a graph neural network (GNN), supporting both cross-scene generation and in-scene completion with 2D and 2.5D environmental representations. The PINN embeds electromagnetic propagation constraints to establish a physically consistent mapping from receiver locations to multipath parameters, including path gain, time of arrival, and angles, while the GNN enforces spatial consistency by modeling correlations among neighboring receivers. To comprehensively evaluate multipath reconstruction quality, we propose a peak-weighted dynamic time warping metric that jointly accounts for amplitude errors and peak delay misalignment in channel impulse responses. Extensive experiments demonstrate that the proposed method consistently outperforms image-based, diffusion-based, and interpolation baselines across both map-level and multipath-level metrics, achieving robust generalization and high-fidelity RF map construction under sparse observations.

Lizhou Liu, Xiaohui Chen, Zihan Tang +2

Department of Electronic Engineering and Information Science, University of Science and Technology of China, Hefei, Anhui 230026, China · Wireless Technology Lab, Huawei, Shenzhen 518129, China

Wireless Communications Radio Propagation Modeling

Jul 1, 2026cs.IT

QuaMoE-DRF: Proactive Beam and Rate Adaptation via Multimodal Dynamic Radio Map Forecasting in ISAC Networks

Static radio maps provide location-dependent propagation priors, but they cannot capture short-term blockage caused by moving objects. Direct sensing-assisted beam prediction is also limited because a beam index discards SINR margins, MCS thresholds, BS alternatives, and communication-equivalent neighboring beams. This paper proposes QuaMoE-DRF, a quality-aware multimodal dynamic radio map forecasting framework for proactive beam and rate adaptation in ISAC networks. Its core representation is a future beam-SINR field. We show that the full multi-BS beam-SINR field is sufficient for finite-codebook threshold-rate BS, beam, MCS, goodput, and outage decisions. For tractability, the implemented model learns a compact reference-BS local field, complemented by BS-level supervision, joint BS--beam supervision, and latent network context; we also clarify that this compact projection alone is not sufficient for BS association. QuaMoE-DRF fuses static geometry, event-like motion observations, structured sensing states, and wireless history through a quality-aware mixture-of-experts module motivated by inverse-variance fusion under heteroscedastic modality errors. It jointly predicts communication-oriented map channels and proactive BS, beam, and MCS decisions. On a dynamic multi-BS and multi-UE urban benchmark, QuaMoE-DRF achieves 402.5 Mbps effective rate, 0.0417 outage probability, and 0.1836 map RMSE, improving the effective rate by 5.67% and reducing outage by 8.35% over the strongest completed effective-rate baseline. The current validation uses labels from a compact blockage/path-loss simulator, with ray tracing used only for calibration and sanity checking.

Zhihan Zeng, Kaihe Wang, Zhongpei Zhang +1

National Key Laboratory of Wireless Communications, University of Electronic Science and Technology of China, Chengdu 611731, China · University of Electronic Science and Technology of China, Chengdu 611731, China · College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou 310027, China +2

Integrated Sensing and Communication Wireless Communications Radio Propagation Modeling Wireless Resource Allocation Spatiotemporal Forecasting Multimodal Fusion

Jun 26, 2026cs.CV

Multi-Modal Conditioned High-Resolution Transformer for Urban Electromagnetic Field Map Prediction Download PDF

Predicting electromagnetic field (EMF) strength in urban environments is essential for cellular network planning but computationally expensive with physics-based simulators. We propose a multi-conditioned dense prediction framework that generates 500 500 EMF maps from building layout images and antenna configurations. Our architecture uses a High-Resolution Transformer (HRFormer) backbone with two complementary conditioning mechanisms: Feature-wise Linear Modulation (FiLM) injects scalar antenna parameters into all backbone stages, while cross-attention fuses 1-D radiation pattern tokens with spatial features at the deepest stage. We further introduce transmitter-relative spatial channels encoding distance, proximity, and bearing from the antenna, enabling coordinate-consistent test-time augmentation (TTA) that reduces test MAE by 6.3%. To address the prediction difficulty imbalance across EMF maps, we design a composite loss combining masked L1, multi-scale structural similarity (MS-SSIM), and a focal L1 term that upweights high-signal pixels, outperforming individual loss components in all metrics. Our best model achieves a test MAE of 0.0461, a 25.2% improvement over a plain UNet baseline and 31.8% over an HRFormer-only baseline.Do-

Do-Eon Kim, Dongryul Park, Seungyoung Ahn +3

Soongsil University, Seoul 06978, Republic of Korea · Cho Chun Shik Graduate School of Mobility, Korea Advanced Institute of Science and Technology, Daejeon 34051, Republic of Korea · Department of Intelligent Semiconductors, Soongsil University, Seoul 06978, Republic of Korea

Transformer Wireless Communications Radio Propagation Modeling Multimodal Fusion

Jun 17, 2026eess.SP

Point-Cloud-Assistant Localized Statistical Channel Prediction by Tangent Gaussian Splatting

Accurate, site-specific channel information is crucial for optimizing next-generation wireless networks. Among various approaches, localized statistical channel modeling (LSCM), which models the channel multipath angular power spectrum (APS) from the reference signal received power (RSRP) measurement, has emerged as a state-of-the-art method tailored for efficient network optimization. However, despite its effectiveness, LSCM cannot predict APS at the vast majority of locations where no measurements are available, which significantly restricts its applicability in large-scale, real-world scenarios. To address this challenge, we present \emph{point-cloud-assisted tangent Gaussian splatting} (PC-TGS), the first framework to \emph{extrapolate} APS to unmeasured outdoor grids by integrating sparse radio measurements with dense LiDAR-based geometry. PC-TGS represents environmental scatterers as anisotropic 3D Gaussians, initialized and refined through a relaxed-mean reparameterization of the raw point cloud. A tangent-plane projection accurately maps each Gaussian into the local angular domain, while a depth-aware electromagnetic splatting process aggregates their contributions. To ensure practical deployment, we derive a closed-form Gaussian-weighted average (GWA) for APS bin integration and provide a provable error bound. { Evaluations on a LiDAR-scanned city-scale dataset (5M points, 6,310 RSRP samples) demonstrate that PC-TGS achieves better APS and RSRP prediction performance compared to state-of-the-art baselines and faster inference time for APS extrapolation task. These results highlight the potential of PC-TGS to enable geometry-aware and data-efficient channel prediction in large-scale wireless digital twins.

Ye Xue, Yiheng Wang, Xinhua Shao +3

Point Cloud Learning Wireless Communications Radio Propagation Modeling Gaussian Splatting

Jun 2, 2026cs.LG

RMPrior: Bridging Propagation Priors and Diffusion Refinement for Efficient Radio Map Construction

Diffusion models achieve high-fidelity radio map construction through iterative denoising, yet their sampling cost limits practicality in dynamic wireless systems where radio maps must be refreshed repeatedly. Meanwhile, classical propagation models encode valuable scene-level knowledge that standard diffusion inference discards entirely by initializing from pure Gaussian noise. This paper bridges propagation priors and diffusion refinement through a mid-start sampling strategy. A matched propagation prior is perturbed to an intermediate diffusion timestep, and the pretrained diffusion backbone executes only the remaining reverse steps, focusing computation on multipath-aware refinement rather than full reconstruction from noise. We provide theoretical analysis establishing an upper bound on the initialization gap, a sufficient condition under which truncation improves reconstruction fidelity, and a formal characterization of prior-quality sensitivity under aggressive truncation. Experiments on IRT4HighRes show that, at

P_{\text{start}}=0.5

, the proposed method achieves a

2.01\times

speedup while simultaneously improving NMSE, RMSE, SSIM, and PSNR over the full-step baseline. A prior-quality ablation across three propagation models of different fidelity confirms that reconstruction quality tracks prior quality, with the sensitivity amplified under shorter reverse trajectories, consistent with the theoretical predictions. These results also suggest that mid-start reconstruction quality can serve as a proxy for ranking the scene-level fidelity of different propagation models.

Zixuan Guo, Xiucheng Wang, Nan Cheng

School of Physics, Xidian University, Xi’an, 710071, China · State Key Laboratory of ISN and School of Telecommunications Engineering, Xidian University, Xi’an, 710071, China

Few-Step Diffusion Sampling Wireless Communications Radio Propagation Modeling Diffusion-Based Inverse Problems Diffusion Model Inference Acceleration

May 28, 2026cs.CV

RadioFormer3D: Weakly Supervised 3D Radio Map Estimation in Low-Altitude Airspace via Generative Modeling

With the emergence of wireless applications in three-dimensional environments, such as the low-altitude airspace and 3D heterogeneous networks, radio map estimation is increasingly required to characterize signal propagation across both horizontal and vertical dimensions. However, extending radio map estimation from 2D to 3D remains challenging due to increased spatial sparsity and limited supervision across continuous altitudes. In this paper, we propose \textbf{\textit{RadioFormer3D}}, a specialized model for volumetric spectrum reconstruction under weak supervision. Building on the dual-stream, multi-granularity fusion architecture of \textit{RadioFormer}, \textit{RadioFormer3D} introduces a Fourier-based sampling encoder and a volumetric decoder to efficiently process sparse measurements in 3D space. To alleviate the lack of vertical supervision, we propose the \textbf{\textit{Joint Spectrum Integrity Loss}}, which integrates volume-level pseudo-label supervision, map-level geometry-aware radio rendering, and pixel-level localized constraints within a unified optimization scheme. This design enables the model to capture complex vertical structural relationships more effectively under sparse supervision. Extensive experiments across several radio map datasets show that \textit{RadioFormer3D} achieves superior overall performance compared to representative existing methods. In particular, it demonstrates improved reconstruction quality at unlabeled altitudes while maintaining a favorable trade-off between accuracy and inference efficiency, positioning it as a highly promising solution for future 3D environment-aware wireless networks.

Zheng Fang, Junjie Liu, Kangjun Liu +3

Pengcheng Laboratory, China · Department of Computer Science and Engineering, Southern University of Science and Technology, Shenzhen, China · Harbin Institute of Technology, Shenzhen, China

3D Reconstruction Wireless Communications Weakly Supervised Learning Radio Propagation Modeling

May 15, 2026cs.IT

GeoGS-CE: Learning Delay--Beam Channel Priors with 3D Gaussians for High-Mobility Scenarios

Wideband channel estimation (CE) in high-mobility scenarios remains challenging because channel responses vary rapidly, while practical systems can allocate only sparse pilots to accommodate dense users. Fortunately, many high-mobility environments, such as high-speed railways, exhibit scheduled trajectories, predictable velocities, and a limited number of dominant propagation paths. These properties induce a delay--beam power spectrum that is more stable than the instantaneous complex channel frequency response (CFR), less sensitive to the random phase coherence, and rich in geometric information. To exploit such environmental properties, we propose GeoGS-CE, a two-stage channel estimation framework for sparse-pilot high-mobility scenarios. In the offline stage, GeoGS-CE jointly models: 1) a scene-level 3D Gaussian representation that captures the non-line-of-sight (NLoS) geometric scattering support, and 2) a leakage-aware differentiable wireless rendering process that maps the NLoS Gaussians, together with an explicit virtual line-of-sight (LoS) component, to the measured delay--beam power spectrum, while accounting for practical OFDM delay and array leakage effects. In the online stage, the delay--beam power spectrum is predicted for each user location and used as a strong covariance prior, enabling accurate full-band and full-array CFR reconstruction and tracking through a linear MMSE estimator. Simulations based on channels generated from a segment of the Guangshen high-speed railway show that the proposed geometric prior substantially improves CFR reconstruction over pilot-only and non-geometric baselines.

Yumeng Zhang, Jiajia Guo, Chaozheng Wen +2

iComAI Lab, HKUST

Wireless Communications Radio Propagation Modeling Channel Estimation

May 8, 2026eess.SP

PropSplat: Map-Free RF Field Reconstruction via 3D Gaussian Propagation Splatting

Building a site-specific propagation model typically requires either ray-tracing over detailed 3D maps or dense measurement campaigns. Both approaches are expensive and often infeasible for rapid deployments where geographic data is unavailable or outdated. We present PropSplat, a map-free propagation modeling method that reconstructs radio frequency (RF) fields using 3D anisotropic Gaussian primitives. Each Gaussian encodes a scalar path loss offset relative to an explicit baseline path loss model with a learnable path loss exponent. Gaussians are initialized along observed transmitter--receiver paths and optimized end-to-end to learn the propagation environment without external information like floor plans, terrain databases, or clutter data. We evaluate PropSplat against wireless radiance field methods NeRF

^2

, GSRF, and WRF-GS+ on two real-world datasets. On large-scale outdoor drive-tests spanning multiple topographical regions at six sub-6 GHz frequencies, PropSplat achieves 5.38 dB RMSE when training measurements are spaced 300m apart and outperforms WRF-GS+ (5.87 dB), GSRF (7.46 dB), and NeRF

^2

(14.76 dB). On indoor Bluetooth Low Energy measurements, PropSplat achieves 0.19m mean localization error, an order of magnitude better than NeRF

^2

(1.84m), while achieving near-identical received signal strength prediction accuracy. These results show that accurate site-specific propagation reconstruction is achievable from sparse RF-native measurements. The need for geographic data as a prerequisite for scalable RF environment modeling is reduced.

William Bjorndahl, Maninder Pal Singh, Farhad Nouri +1

Department of Electrical and Computer Engineering, Southern Methodist University, Dallas, TX, USA · Department of Engineering Technology, University of Houston, Houston, TX, USA

3D Gaussian Splatting Wireless Communications Radio Propagation Modeling

May 8, 2026cs.CV

Differentiable Ray Tracing with Gaussians for Unified Radio Propagation Simulation and View Synthesis

Explicit neural representations such as 3D Gaussian Splatting (3DGS) enable high-fidelity and real-time novel view synthesis, yet optimize for alpha-composited optical appearance rather than ray-intersectable geometry. In contrast, radio-frequency (RF) digital twins require deterministic multi-bounce paths, where the geometry dictates trajectories and their associated attenuation and delay. We introduce a framework enabling differentiable RF propagation simulation directly within visually reconstructed neural scenes, allowing point-to-point path computation between arbitrary 3D locations while preserving high-quality visual rendering. Unlike conventional RF simulation pipelines that rely on manually constructed meshes, we embed Gaussian primitives into a hardware-accelerated ray tracing structure as the underlying spatial representation. By extracting physically meaningful channel impulse responses from visual-only reconstructions, we provide cross-modal evidence that neural reconstructions can serve as unified spatial representations for both electromagnetic propagation simulation and photorealistic view synthesis.

Niklas Vaara, Lam Huynh, Pekka Sangi +2

Center for Machine Vision and Signal Analysis, University of Oulu, Finland · CubiCasa Oy, Finland

3D Gaussian Splatting Differentiable Rendering Wireless Communications Radio Propagation Modeling Digital Twins