Robot Imitation Learning
Latest papers 647
172 papers in the last four weeks, up 310% on the four weeks before. 1.0% of all new papers.
Real-robot demonstrations are limited, motivating the use of human manipulation data collected without robots, including egocentric videos and handheld Universal Manipulation Interface (UMI) demonstrations. However, differences in viewpoint, embodiment, and available action supervision make it difficult to align representations across these sources according to manipulation motion rather than visual appearance. We introduce UMI-Bridge, which uses UMI as an intermediate domain to align representations according to action equivalence rather than pixel similarity. UMI action supervision anchors the latent representation to end-effector motion and gripper behavior, while synchronized head-wrist observations and paired ego-UMI clips support alignment across views and domains. We train a dual-view latent action model (LAM) on human manipulation data without robot demonstrations, then freeze its wrist teacher and dynamics model to regularize vision-language-action (VLA) post-training on UMI and robot data. The shared wrist interface enables this training-time supervision across both domains while preserving the policy's standard inference architecture. Across three real-robot tasks, UMI-Bridge achieves 91.7% mean success versus 73.3% for Naive Co-training with matched UMI and robot data. On two data-efficiency tasks, it surpasses a full-data Robot-only baseline using 25% of the robot demonstrations together with UMI data. It also achieves 85% and 90% success on two additional tasks learned from UMI demonstrations without task-specific robot demonstrations. These results support action-anchored latent alignment for data-efficient robot learning and UMI-to-robot task transfer.
Energy-Regularized Imitation Learning for Force- and Work-Aware Robotic Manipulation
This paper studies energy-aware manipulation as a physically grounded learning problem. We define a joint-space mechanical-work proxy from joint torque and angular displacement, and train a differentiable energy predictor that estimates this work from robot states and actions. The predictor converts a non-differentiable simulator-side physical quantity into a differentiable regularizer for fine-tuning a pretrained manipulation policy. We instantiate the framework with RVT-2 on RLBench and evaluate 12 manipulation tasks involving object contact, articulated motion, placement, pushing, and sweeping. The proposed fine-tuning reduces the average mechanical work from 208.8J to 204.4J (i.e., 2.1% reduction), while the mean task success rate also increases slightly from 86.2% to 86.9%. These results show that work-aware policy optimization can suppress physically inefficient motion without requiring an explicit differentiable dynamics model.
Missing Bridges: Composition-Aware Active Imitation Learning
Active imitation learning reduces expert effort by allowing a learner to request the demonstrations it needs. Existing methods typically select these requests for their expected information gain about the expert policy. In structured multi-task domains, however, the number of start-goal tasks may grow combinatorially despite their solutions sharing reusable behavior. This makes composable behaviors especially valuable, since a single demonstration may help solve many tasks at once. Prior methods do not explicitly account for this value when selecting which demonstration to request. We introduce Adaptive Agents via Latent Topologies (AALT), which requests demonstrations that maximize expected gains in start-goal connectivity. We further show that this objective is formally tied to information gain about task reachability. AALT organizes existing demonstrations into a topology of latent hub states connected by learned behaviors, identifies high-value bridge demonstrations that are likely to enable many tasks at once, and grounds each to an expert query. At inference, it plans through the resulting topology and conditions a diffusion policy on each successive hub transition. In a simulated UR5e robot ordered-retrieval domain with 72 tasks, AALT improved from 42/72 to 72/72 (100%) successful tasks consistently using only 3 demonstrations totaling 5 transitions beyond the initial dataset. After 20 demonstrations, the strongest baseline averaged 88.6% success using 98 transitions.
Vision-Language Grounded Task-Context-Aware Imitation Learning for Robotic Disassembly
Real-world robotic disassembly requires long-horizon execution, where robots must perform ordered sequences of manipulation tasks across multiple parts within a single scene. Multiple valid task goals and diverse assembly configurations make it difficult for imitation policies to infer the intended skill from raw observations alone, particularly when training data cannot cover the combinatorial diversity of real-world configurations and part geometries. We show that incorporating task context through language alleviates these challenges by providing explicit structure for skill selection and associating language-specified tasks with their corresponding manipulation targets in the visual scene. The proposed framework combines hierarchical task selection with task-context-aware imitation learning to ground language instructions in spatial visual representations for robotic disassembly. The resulting framework generalizes across diverse connector geometries and assembly configurations without requiring explicit object annotations. Our method improves end-to-end task success by 35 percentage points over the baseline diffusion policy and by 75 percentage points over the previous task-context-aware baseline.
Dissecting Motion-Prior Regularization for Data-Scarce Robotic Insertion
This study asks whether training-time motion-prior regularization can improve insertion success when a diffusion policy is learned from only 15 demonstrations. Minimum jerk discourages abrupt changes in predicted translational acceleration; speed-curvature regularization instead couples movement speed to path geometry. These are candidate mechanisms for task completion, not safety guarantees. We compare the priors individually and jointly, neither prior, and generic smoothness, with 80 real-robot trials per setting pooled over four recorded condition classes. Joint and minimum-jerk-only settings each achieved 70/80 successes (87.5%), versus 69/80 (86.3%) for speed-curvature only, 66/80 (82.5%) for neither prior, and 67/80 (83.8%) for generic smoothness. Success rates and Wilson 95% confidence intervals are visualized for direct comparison. Joint regularization exceeded neither by 5.0 percentage points but provided no observed gain over minimum jerk alone. The results motivate minimum jerk as the simpler candidate for replication, without establishing synergy, biomechanical specificity, improved safety, or distribution-shift robustness.
XPACE: Joint World and Action Modeling from Heterogeneous Experience
A general-purpose robot needs to draw on diverse experience, choose actions, and anticipate how those actions will change the world. We introduce XPACE, a unified embodied world model that serves as both a world action model, jointly predicting executable robot actions and future video, and a world simulator, predicting the visual consequences of prescribed actions. Our key insight is that video prediction can both connect heterogeneous experience to action learning and generate new experience for policy improvement. With a shared video backbone between the policy and simulator, we use action-unlabeled video to learn visual dynamics and action-labeled human and robot demonstrations to jointly learn video and action prediction. Building on this architecture, a coarse-to-fine training curriculum progressively emphasizes robot control while retaining human experience, allowing the policy to learn behaviors beyond those covered by robot demonstrations. Beyond learning from recorded experience, XPACE uses its simulator to create additional recovery supervision for the policy. Specifically, we adapt the simulator to its own generated context, synthesize deviation-recovery trajectories around expert demonstrations, and fine-tune the policy on filtered recovery examples. Experiments on XPENG's IRON humanoid robot show that heterogeneous training improves robustness and enables transfer of human-observed skills to tasks absent from robot demonstrations, while recovery data generated by the model's own simulator further improves real-world task completion. Together, these results demonstrate how joint world and action modeling connects learning from heterogeneous experience with simulation-driven policy self-improvement.
SWIM: Vision-Language-Grounded Soft Whole-Body Interactive Manipulation
Soft and continuum robots enable manipulation through distributed body deformation and contact, yet translating language and visual context into executable whole-body actuation remains a fundamental challenge. We present SWIM, a framework that maps an initial RGB observation and a language instruction to a complete actuation-command sequence. Its vision-language-action (VLA) policy, SWIM-VLA, combines a diffusion action head with Visual Soft Proprioception (VSP) through a shared representation of RGB observations, language instructions, and tendon states. The diffusion head models conditional distributions of expert command chunks, while VSP supervises ordered body-anchor predictions using simulation ground truth, encouraging the representation to retain body geometry when learning from limited demonstrations. Embodied mechanical intelligence supports physical execution of command sequences generated through iterative virtual rollout from evolving simulated observations, with intrinsic compliance providing local contact adaptation without online policy queries. We evaluate SWIM on packing, reaching, and grasping on a planar tendon-driven soft robot, with grasping targets anchored. In simulation, SWIM-VLA achieves success rates of 100%, 96%, and 88%, respectively, outperforming an adapted OpenVLA-OFT baseline and controlled ablations. On hardware, SWIM achieves success rates of 100%, 80%, and 75%, compared with 75%, 40%, and 25% for direct online deployment of the same policy checkpoint.
The Latent That Never Was: A Forensic Re-run of the CVAE Ablation in Action Chunking Transformers
Action Chunking Transformers (ACT) are widely used to learn robot manipulation from demonstrations. Their conditional variational autoencoder includes an encoder meant to capture differences between demonstrations during training. The original ACT paper reported that encoder removal dropped the mean success rate from 35% to 2% on two simulated tasks with human demonstrations. We re-ran this ablation in the original code and checked whether the findings depend on the implementation or training data. The published drop does not reappear in our tests, although smaller gains or losses in success rate remain uncertain. To investigate the discrepancy, we varied training length and how checkpoints are selected for evaluation. Both can reverse which policy scores higher, but the published drop's cause remains unknown. Success rates alone leave open whether the encoder provides information that helps the policy reconstruct demonstrated actions. On the tested ACT benchmark, the sampled latent provides little reconstruction benefit at every tested nonzero weight of the penalty on latent information. At inference, ACT leaves this latent unused and sets it to zero. Skipping the encoder increases training throughput in both implementations we timed. We release code, evaluation tools and results so others can repeat the comparisons and test the encoder on other tasks.
IL-ACT: Imitation Learning with Adaptive Cartesian Tracking Control for a 30-ton Excavator
Autonomous excavator control is challenged by coupled kinematics, actuation lag, and uncertainty. We propose imitation learning and adaptive Cartesian tracking (IL-ACT), a novel motion control framework for a 30-ton-class excavator. An anchored, 14-input imitation policy pretrained on operator demonstrations generates nominal joint rates; adaptive Cartesian feedback and gated gain/bias estimation correct these commands before a stopping-distance governor constrains joint-reference generation. Simscape evaluation covers 100 sequential goals and spiral, figure-eight, and rounded-raster tracking, including 88 additional runs across three training seeds, two initializations, and speeds, under hydraulic response and sensing conditions. Compared with Teacher+ACT, IL-ACT completes all goals with shorter duration and lower terminal errors under both response conditions. Telemetry-initialized IL-ACT lowers RMSE in all 24 figure-eight and rounded-raster seed comparisons and lowers additional-load spiral mean RMSE by approximately 29%. Original spiral RMSE also improves over IL-only and PID. Under a shared sensor-noise realization, telemetry-initialized IL-ACT achieves 27.67% lower mean RMSE than Teacher+ACT; enabling estimation reduces mean RMSE by relative to the frozen estimator. Pretrained-weight effects remain mixed, and the original teacher comparison exhibits a spiral RMSE--maximum-error tradeoff. Analysis establishes bounded adaptive states and Cartesian feedback, with reference admissibility conditional on governor feasibility.
Weave: Learning Whole-Body Dexterous Loco-Manipulation from Human-Object Interactions
Learning humanoid-object interaction requires coordinating whole-body balance, locomotion, and dexterous hand contact to control both robot and object motion. Human demonstrations provide examples of coordinated interaction, but transferring these behaviors to humanoid robots requires learning how to establish and maintain effective contacts under different embodiments and dynamics. We present Weave, a unified framework for learning whole-body dexterous humanoid-object interaction from captured human demonstrations. Weave first converts captured human-object interactions into executable robot-object references through contact-aware retargeting and approach-motion completion. At its core is a contact- and geometry-aware policy that jointly commands 29 body joints and 12 actuated finger joints across multiple objects and interaction sequences. Evaluation across nine objects yields a 92.5% success rate on trained interactions and, without any additional training, 65.0% on sequences never seen during training. We additionally release ~9,000 physically executed rollouts spanning ~23 hours, providing robot-object trajectories with contact annotations for downstream interaction-policy learning and physically consistent HOI motion generation. Project website: https://xiaohu-art.github.io/Weave/
UniDex-ViTac: Learning Unified Visuo-Tactile Dexterous Manipulation Policy from Human Video Data
Human videos provide demonstrations of dexterous manipulation but lack robot-executable actions and tactile measurements. We present UniDex-ViTac, a framework that uses human-video-guided simulation to generate robot demonstrations paired with fingertip contact observations for training a deployable visuo-tactile policy. Object-specific residual reinforcement learning specialists adapt annotated human-object interaction references to a robotic arm-hand system. Their successful rollouts pair final robot action targets with robot-side fingertip contact observations. From 50 human demonstrations across ten objects, we collect 10,000 simulated trajectories to train a single Action Chunking with Transformers (ACT) based generalist. The policy combines point clouds, proprioception, and four binary contact signals encoded through fingertip labels and a separate token, without requiring human references or privileged object identity and pose at deployment. The contact-augmented configuration achieves 68.3% macro-average success in simulation, compared with 55.5% for the point-cloud-only baseline. Without real-robot demonstrations or policy fine-tuning, it succeeds in 73/110 physical trials (66.4%) across six seen and five unseen objects, compared with 60/110 (54.5%) for the baseline, an increase of 11.8 percentage points. These results support the feasibility of learning a unified visuo-tactile dexterous manipulation policy from video-guided simulated interactions. Project page: https://unidex-vitac.github.io/
Touch2Trace: Tactile-Driven Imitation Learning for Dexterous Cable Tracing
Dexterous manipulation of deformable objects demands continuous fingertip-level regulation of pressure, friction, and incipient slip. We study one of the most challenging cases: dexterous cable tracing, feeding a cable through the hand with repeated pinch-and-curl motions of the thumb and index finger. We introduce Touch2Trace, a tactile-driven imitation-learning system for this task, and provide, to our knowledge, the first systematic real-world characterization of how encoder pretraining, control rate, temporal context, and spatial resolution each shape policy performance. The winning learning recipe combines a tactile encoder pretrained for a custom 32 x 32 piezoresistive sensor (TacV5) via self-supervised learning with a lightweight transformer policy trained on teleoperated demonstrations via behavior cloning, deployed at 60 Hz on a Tesollo DG-5F hand. Tactile feedback without vision or explicit cable-state estimation significantly improves tracing performance versus a proprioception-only baseline: from 0.2 cm to 20.1 cm mean distance and 0% to 93% success rate, with zero-shot transfer to unseen cables and routing conditions. The results quantify the influence of key parameters in tactile-driven systems for reliable dexterous deformable object manipulation.
Continuous Manifold-Decomposed Impedance Retargeting for Contact-Rich Imitation Learning
CMDIR extends Manifold-Decomposed Impedance Retargeting (MDIR) to transform fixed-impedance demonstrations into continuous variable-impedance controllers, which can also serve as structured supervision for imitation learning. Continuous Task-Manifold Impedance Representation (TMIR) pairs an evolving task frame with controller instructions. Demo-relative Compromise dynamics retain moving-basis transport and control/physical metric mismatch, yielding displacement, reaction-impulse, and perturbation-sensitivity criteria. Quality-to-Fast automatically compiles a solver structure from development paths within a predefined finite space, re-instantiates that structure for each demonstration, and certifies the resulting candidate by multi-resolution evaluation. Across 225 retargeted-controller trials in three real contact tasks, full CMDIR improves mean task-proxy retention and reduces mean pose deviation, force fluctuation, and peak force relative to discrete MDIR. FastMPO achieves a -- speedup over C-MPO with comparable closed-loop outcomes. Downstream experiments demonstrate learnability of the complete TMIR supervision interface; lower force fluctuation and peak force are observed among successful executions, while completion reliability remains uneven across tasks and environments.
Flow-Matched Motion Priors: Online Optimal-Transport Rewards for Imitation Learning
Learning a motion prior requires a reward that guides a policy from its current behavior toward demonstrated motion. Adversarial Motion Priors (AMP) provide such a reward with a discriminator. However, adversarial objectives can become uninformative when policy and expert supports are far apart. A naive use of optimal transport (OT) averages matched expert successors into a barycentric target. Averaging across gait phases can weaken the target's joint motion. We introduce Flow-Matched Motion Priors (FMP), an online scalar reward learned from paths connecting current rollout histories to an expert motion bank. Entropic OT supplies the coupling. Before each policy update, we train a neural potential with flow matching (FM) along the rollout-to-expert paths, endpoint-gradient supervision, and relative-value calibration. The actor receives only physical observations and the reward remains a scalar, as in AMP. Controlled reward-model experiments show substantially better generalization beyond the fitting rollout than value-only or endpoint-only fitting. On Unitree G1, matched 50-million-transition experiments compare FMP with AMP, a barycentric OT reward, and nested ablations under demonstration and fixed-pose initialization. FMP produces stable forward walking at 0.727 m/s from demonstration resets and 0.338 m/s from a fixed default pose. In the fixed-pose condition, it incurs 129 falls versus 243 for the endpoint-only control. Against a static score-gradient teacher, dynamic FM reduces score-increment error at interpolation fractions 0.25 and 0.50 while using 29% less offline fitting time.
LieSpline-DP: Lie-Group B-Spline Diffusion Policy for Smooth Robot Manipulation
Diffusion Policy (DP) is a powerful Learning from Demonstration (LfD) method for robotic manipulation, yet it suffers from discontinuous and non-smooth trajectories. Spline-based action representations promote smooth motion within individual action chunks, but existing spline-based methods neither guarantee cross-chunk continuity nor account for the group structure of . We therefore propose LieSpline-DP, a Lie-group B-spline diffusion policy that generates end-effector trajectories directly on and couples consecutive plans by sharing their boundary control poses, ensuring continuity throughout the entire planned trajectory. Across three real-robot tasks, LieSpline-DP produces lower trajectory jerk and higher task success rates than the DP baseline. The gains are particularly pronounced in real-world tasks involving liquids and flexible objects: in our real-robot experiments, LieSpline-DP achieved a 100% success rate on both pouring and bucket hooking, whereas the DP baseline achieved only 10% and 30%, respectively.
GIFT: Glove-Inferred Force Transfer: Force-Aware Human-to-Robot Skill Transfer from a Wearable Sensing Glove to a Robot Hand Without Tactile Sensors
Human-to-robot skill transfer from sensing gloves has so far relied on shared hardware: the same tactile glove worn by the demonstrator and the robot, or a learned alignment between two tactile sensors. We present GIFT (Glove-Inferred Force Transfer), a pipeline in which the interface between human and robot is a physical unit rather than a shared sensor: fingertip force is measured in newtons on the human side and estimated in newtons on the robot side. A wearable glove records finger flexion, calibrated fingertip force, and wrist orientation, while a head-mounted camera records the demonstration; no robot is present. At deployment, the robot estimates force from actuator-current residuals relative to a free-space baseline, through a calibrated mapping to newtons, so any position-controlled hand that reports motor current can serve as the deployment platform. The policy uses a glove-space state and predicts finger-position targets; the robot enters only through two calibrated adapters, a retargeting decoder and a force estimator. We evaluate GIFT on a cup grasp-and-hold task with two action-chunking policies trained on the same demonstrations, with fingertip-force inputs retained in one and zeroed in the other. In a 50-rollout evaluation with sample size and metrics fixed before scoring, both policies succeeded in all 25 rollouts. The median of the per-rollout hold-phase grip-force estimates was 53% lower with force inputs: 1.20 N versus 2.55 N (one-sided Mann-Whitney U, p<0.0001). In an observation ablation, a vision-only policy achieved 0/15 grasps, policies given hand-command state acquired the grasp, and the force inputs determined how hard the policy held. A force channel measured on the human hand thus transfers to a robot hand with no tactile hardware, through a retargeting map from five glove channels to seven robot actuators, with no sensor shared between the two.
How to Better Train VLAs: Lessons Learned From the REAL-I Challenge at ICRA 2026
How can robot policies learn more effectively from a fixed demonstration budget? The first Real-world Embodied AI Learning (REAL-I) Challenge at ICRA 2026 examined this question through simulation, real-robot evaluation, and an on-site final on a shared dual-arm humanoid platform. We describe the challenge tasks, data and deployment interfaces, and competition results, then compare the approaches contributed by NUS-CLEAR, RCL-Lab, and DeepTouch AI. Their systems combined pretrained vision-language-action models and task-specific imitation policies with different strategies for data curation, staged adaptation, checkpoint selection, and action-space design. The team reports highlight the importance of adapting to the deployment environment while retaining prior capabilities, treating demonstration quality at an appropriate temporal scale, and suppressing errors in inactive robot components. They also expose the limitations of offline action-prediction metrics for forecasting closed-loop success. These observations motivate a view of fixed-data robot learning that integrates data, adaptation, evaluation, and deployment.
Bi-MoDe: Bilateral Control-based Imitation Learning via Modifier-Conditioned Decoding for Modulation of Execution Speed and Contact Intensity
Bilateral control-based imitation learning captures both position and force information, making it well suited to contact-rich manipulation. However, existing approaches provide limited means for an operator to specify how a learned task should be executed at inference time, such as slowly or quickly, gently or firmly. We propose Bi-MoDe, a modifier-conditioned decoding framework that injects a constrained latent into every layer of the Transformer action decoder via adaLN-Zero, allowing behavioral directives to directly influence action-chunk generation. We evaluate the method on a real-world whiteboard wiping task with combinations of temporal and physical modifiers. Bi-MoDe improves physical directive following over the action-chunking baseline while maintaining comparable temporal control. An ablation further shows that decoder conditioning and latent-space composition interact, and that their combination is important for accurate physical directive following. Additional material is available at the https://mertcookimg.github.io/bi-mode/
Improving Imitation Learning Efficiency for Manipulation through Geometric Prior Pretraining
Applying an imitation learning policy to a new manipulation task usually requires collecting new demonstrations and retraining the model, which makes sample efficiency a practical concern. Pretraining on large-scale robot datasets is effective in this respect, but such datasets are costly to collect and train on, while data augmentation techniques typically require a new round of data generation and retraining for each task. A complementary question is what useful prior can be provided to a policy at negligible cost before any task-specific data are collected. In this study, we construct a geometric visual pretraining dataset in which each scene contains only a plane, an object, and a hand, and trajectories are generated automatically. The scenes contain neither textures nor backgrounds; pretraining primarily exposes the policy to the geometric relationship between the hand and the object. Furthermore, representing the hand as a cube avoids tailoring the dataset to a specific robot morphology. We evaluate this geometric prior using ACT on three simulated robots across five manipulation tasks each, as well as on three real-world robot tasks. Across many of these robot--task combinations, fine-tuning from the geometric prior achieves higher success rates in the early stages of training than training from scratch while using only a small number of task demonstrations. These results suggest that even highly simplified geometric scenes can provide a useful initialization that transfers across robots and to real-world tasks when task data are limited.
SEED-UMI: Sharing the Exoskeleton between human and robot for onE-to-one Dexterous demonstration
Imitation learning for dexterous hands is bottlenecked by the difficulty of collecting contact-rich demonstrations that transfer faithfully to the robot. Prior wearable-exoskeleton systems record only on the human side and retarget via open-loop mappings calibrated in free space, which degrade under contact. We present SEED-UMI, a framework in which both the human and the robot wear the same exoskeleton: joint encoders become a physically shared measurement, and wrist cameras mounted to the exoskeleton observe the same outer mechanism during both human data collection and robot policy rollouts. This turns retargeting into paired cross-embodiment supervision and lets policies train directly on raw exoskeleton-centric wrist images, without segmentation or inpainting. On five contact-rich tasks, SEED-UMI achieves 3.0x greater data collection efficiency than exoskeleton-based teleoperation and a 70.0% average rollout success rate.
ObstaDiff: Generalizable Diffusion Policy Learning via Obstacle-aware Representations
Imitation learning has achieved impressive results in robotic manipulation, yet most existing approaches assume clean backgrounds and lack explicit mechanisms for obstacle-aware motion generation. Extending such policies to cluttered, real-world scenes with unstructured obstacles remains a key generalization challenge. We present ObstaDiff, a decomposed diffusion-policy framework with a lightweight obstacle-aware visual encoder. ObstaDiff extracts a structured target-obstacle-background representation, enabling the downstream alignment policy to generate end-effector trajectories toward a target-centered bottleneck pose while reasoning about surrounding obstacles. We evaluate ObstaDiff on 61 real-robot greenhouse trials per method (366 executions in total). ObstaDiff achieves 75.41% average task success and 8.20% average obstacle collision rate, outperforming representative imitation-learning baselines and improving generalization in cluttered agricultural scenes.
HuRo: Robotizing Human Videos for Scalable VLA Pretraining
Human video datasets offer an abundant and diverse source of interaction data that can complement expensive real-robot data. To bridge the human-to-robot embodiment gap, existing approaches either robotize videos in task-matched settings or address observation and action alignment separately. In this work, we systematically examine whether robotized human videos can serve as an effective and scalable source of robot-aligned supervision. To this end, we develop a robotization pipeline that converts heterogeneous human videos into robot-aligned observations and action trajectories while inferring missing intermediate signals across annotation levels. Using this pipeline, we construct the HuRo dataset, comprising about 630K robotized episodes and 142M processed frames from five human-video sources. Across four real-world manipulation tasks, pretraining a VLA policy on increasing amounts of robotized human-video data improves overall completion from 51.5% to 80.3% and OOD completion under spatial and visual shifts from 34.9% to 72.2%. Ablations further show that visual robotization improves OOD robustness and that end-to-end pretraining with retargeted actions outperforms visual-only transfer. Project website: https://3587jjh.github.io/HuRo.
RoboDrop: Curating VLA Post-Training Data via Local Gradient Compatibility
Vision--language--action (VLA) models acquire broad generalization through large-scale pretraining, yet adapting them to a new task and robot embodiment still requires post-training on newly collected data. Unlike pretraining, post-training targets task- and embodiment-specific adaptation, making it particularly sensitive to data quality. In practice, collected robot datasets often contain heterogeneous errors, including execution mistakes, sensor drift, and timestamp misalignment, which can impair post-training and policy performance. Manual inspection is costly, while existing data-cleaning methods are typically tailored to particular corruption types. To address these challenges, we introduce RoboDrop, a data-curation framework that audits supervision using local gradient compatibility measured along the training trajectory as a proxy for its effect on post-training performance. During a one-epoch warm-up run, RoboDrop scores each candidate sample online by comparing its gradient with those of task-semantic and visually matched validation samples. The resulting sample scores are aggregated at the episode level, and a simple automatic post-processing rule converts them into filtering decisions. We evaluate RoboDrop on controlled observation--action corruptions, naturally suboptimal demonstrations in simulation, and real-robot datasets containing non-expert collection errors. Across these settings, RoboDrop more accurately distinguishes unreliable demonstrations than prior methods, while post-training on the curated data consistently yields stronger downstream policies, with average real-robot rollout success rising from to . These results establish training-trajectory-aware, context-conditioned supervision auditing as an effective approach to robust VLA post-training.
Proxy Policy Steering
Generalist robot policies carry broad manipulation priors from large-scale data, but specializing them to a new task remains the deployment bottleneck. This requires eliciting task-specific behavior from limited demonstrations without degrading their broad capabilities. We introduce Proxy Policy Steering (PPS), an inference-time adaptation method that resolves this challenge by training two lightweight proxy policies whose calibrated velocity-space difference steers the frozen base sampler. A reference proxy models the frozen base's behavior on target-task observations, and a task proxy, initialized from the reference, captures how this behavior changes under task supervision. Their difference forms a calibrated velocity-space residual that steers the frozen base sampler at every denoising step. We identify the conditions under which this residual isolates the change induced by task supervision, and validate them empirically. Because the base is never directly modified, its broad capabilities remain available at inference, including behaviors such as recovery from failure that the demonstrations themselves do not exercise. Adaptation requires only forward velocity predictions from the base, making PPS lightweight to train and applicable even without access to the base's parameters. On 8 real-world and 4 simulation manipulation tasks, PPS lifts the state-of-the-art pi 0.5 base policy by 53% absolute success rate on average, with zero-to-one gains on tasks the base never solves, while preserving the base's broad capabilities. PPS outperforms LoRA fine-tuning, from-scratch specialists, residual policies, and prior inference-time steering methods.
FOCI Policy: Focus on Object-Centric Interactions for Relational Manipulation Policies
Object-centric manipulation policies improve generalization by modeling object motion instead of directly predicting robot actions. However, existing methods are often limited by representations which are either too simplistic to capture interaction dynamics or too dense to learn efficiently. We observe that many rigid relational manipulation tasks are governed by short interaction phases where the relative motion between task-relevant objects is tightly constrained. Based on this observation, we propose Foci Policy, an interaction-centric framework that achieves a two-fold abstraction: (1) temporally, by automatically extracting compact interaction segments from demonstrations;(2) spatially, by representing skills as relative motion between task-relevant objects, yielding invariance to scene configurations and robot embodiment. Experiments on RLBench, COLOSSEUM, and real-world tasks show that Foci Policy achieves strong performance with substantially less training data than prior object-centric and action-centric policies. These results suggest that modeling object-object interactions provides a simple and efficient inductive bias for rigid relational manipulation. Project page: fitz0401.github.io/foci-page/.
Dex-X: Learning Visual-Tactile Dexterous Manipulation From Human Videos with Simulated Interaction
Human videos are an abundant source of dexterous manipulation behaviors, but they lack tactile information that is crucial for contact-rich interaction. This raises a fundamental question: can robots learn deployable visual-tactile dexterous manipulation policies from human video demonstrations without robot-side data collection? We present DEX-X, a framework for learning visual-tactile dexterous manipulation from human videos through simulation. Our key insight is that simulation can serve as a tactile completion engine. Given monocular human demonstrations, DEX-X reconstructs hand-object interactions in simulation, where physically grounded contact dynamics provide tactile supervision unavailable in the original videos. Leveraging this recovered tactile information, we train visual-tactile dexterous manipulation policies and distill them into deployable policies operating on point-cloud observations and tactile sensing. We demonstrate zero-shot sim-to-real transfer on a dexterous hand-arm platform across diverse grasping and contact-rich tool-use tasks. The teacher policy achieves 65.9% average success across six task categories in simulation, while the distilled visual-tactile policy achieves 93% success on real-world cube picking and 53% on the challenging table-cleaning task. Zero-shot generalization to unseen object geometries is also observed on object-picking tasks. Our results suggest that simulated interaction is a key bridge between human videos and deployable dexterous manipulation policies, providing the missing physical supervision needed for scalable robot skill learning from Internet-scale human video data.
CosmoH2G: A Hand-to-Gripper Transfer Dataset and Baseline Method for Object Manipulation with Complex Spatial Movements
Transferring human hand demonstrations to robotic grippers has recently emerged as a cost-effective solution for robot learning. However, existing methods are largely confined to simple, planar tasks and fail to handle complex spatial movements (e.g., intricate trajectories involving rotations or flips) that are essential for robot manipulation. Motivated by this gap, we adopt an implicit, data-driven approach guided by fine-grained hand-pose motions. To this end, we introduce a scalable acquisition pipeline to collect hand-gripper paired demonstrations, governed by a rigorous protocol that prioritizes motion complexity and leverages a handheld gripper for seamless action mimicry. This yields a large-scale paired dataset comprising 6,189 episodes across 1,254 unique objects, exhibiting significantly higher spatial complexity than existing benchmarks. However, learning such complex mappings remains challenging. We observe that naive end-to-end generation of full gripper pose sequences is insufficient, as minor trajectory deviations compound rapidly under intricate dynamics. To address this, we propose a two-stage framework: Stage I predicts sparse gripper keyframes (initial and terminal) to simplify the mapping objective, while Stage II generates the full continuous action sequence conditioned on these keyframes. Furthermore, to mitigate cumulative drift, we keep the gripper's orientation being learned while post-optimizing its translation based on the grasping heuristic and kinematic consistency. In both simulation and real-robot experiments, our framework enables stable and precise hand-to-gripper transfer of complex spatial manipulations, significantly outperforming traditional baselines. Project page: https://cosmoh2g.github.io.
Distributed Dexterous Manipulation with Spatially Conditioned Multi-Agent Transformers
Distributed Dexterous Manipulation (DDM) is a novel paradigm that presents significant control challenges due to high action-space redundancy, inter-robot cooperation, and dynamic object-robot interactions. This paper introduces a framework based on spatially conditioned Multi-Agent Transformers (MATs) to efficiently learn robust control policies for a DDM system grounded in an array of 64 soft delta robots arranged in an 8x8 grid. Our three core contributions are: (i) an MAT with adaptive layer norm for compute efficiency, (ii) spatial contrastive embeddings to ground transformer embeddings in the spatial configuration of the robots, and (iii) an MAT-based behavior cloning method fine-tuned using Soft Actor Critic. We also propose an action selection formulation to analyze the trade-off between task performance and the number of robots utilized. Our experiments show that MATs iteratively refine their actions through the stacked attention blocks. This further informs the benefit of spatial conditioning in transformers to learn DDM policies. We demonstrate long-horizon planar manipulation tasks with objects of various geometries in simulation and real-world. Finally, we show how action selection mitigates robot maintenance by reducing wear and tear due to inter-robot collisions while maintaining the ability to manipulate objects along various trajectories in the real-world, achieving an average error of ~1.5 cm, while using ~65% fewer robots.
ContextFlow: In-Context Flow Matching for Robot Manipulation
Although highly effective in vision and language domains, applying in-context learning to robotics remains challenging. Existing autoregressive in-context imitation methods discretize continuous actions and exacerbate the accumulation of early prediction errors through next-token prediction, limiting their generalization on unseen task configurations. Meanwhile, flow-matching policies have been explored for continuous robot control and can help mitigate compounding errors; however, in-context imitation learning within a flow-matching framework remains underexplored. To address these limitations, we introduce ContextFlow, a conditional flow-matching model that learns continuous action distributions for in-context imitation learning. ContextFlow conditions flow-based action prediction on demonstrations and observations, enabling robust generation from noisy action distributions. To better encode multimodal in-context demonstrations, we adapt perceiver-style multimodal context compressors that distill visual, proprioceptive, and action sequences into compact, task-relevant latent representations. On LIBERO, ContextFlow outperforms ICRT by 35 percentage points in average success rate on unseen task configurations, while matching the performance of the task-specific fine-tuned VLA model without any fine-tuning on unseen tasks. On real robots, it generalizes to unseen configurations of both single-arm and bimanual tasks, achieving 40% success on a new pen-uncapping configuration. Project Page: https://dingjiansw101.github.io/contextflow-page/.
Unifying Physics-Based Humanoid Interaction with a Context-Conditioned Interaction Prior
Developing unified physics-based humanoid controllers that can navigate complex 3D scenes and manipulate objects remains a longstanding challenge. Existing approaches are often specialized for either locomotion or object-centric manipulation, or rely on task-specific reward engineering that does not scale well across diverse behaviors. We present CHIP, a unified, physics-grounded framework for learning reusable humanoid interaction skills from heterogeneous motion data. Central to our approach is a conditional interaction prior that models a context-dependent distribution over these skills within a shared discrete space. Our method is trained in three stages. We first learn physics-based motion-imitation policies that acquire grounded teacher behaviors from heterogeneous interaction data. We then distill these behaviors into a context-conditioned interaction prior that captures reusable motion structure across locomotion and manipulation. Finally, we initialize downstream task policies from the pretrained prior and adapt them through prior-regularized online RL post-training. Experiments on a diverse suite of humanoid interaction tasks show that our approach supports scene-aware locomotion, contact-rich object manipulation, and compositional behaviors such as environment-aware object transport and long-horizon skill sequencing, while producing smooth transitions and physically plausible motion.