Aerial Imagery

We introduce Paired-CSLiDAR (CSLiDAR), a cross-source aerial-ground LiDAR benchmark for single-scan pose refinement: refining a ground-scan pose within a 50 m-radius aerial crop. The benchmark contains 12,683 ground-aerial pairs across 6 evaluation sites and per-scan reference 6-DoF alignments for sub-meter root-mean-square error (RMSE) evaluation. Because aerial scans capture rooftops and canopy while ground scans capture facades and under-canopy, the two modalities share only a fraction of their geometry, primarily the terrain surface, causing standard registration methods and learned correspondence models to converge to metrically incorrect local minima. We propose Residual-Guided Stratified Registration (RGSR), a training-free, geometry-only refinement pipeline that exploits the shared ground plane through height-stratified ICP, reversed registration directions, and confidence-gated accept-if-better selection. RGSR achieves 86.0% S@0.75 m and 99.8% S@1.0 m on the primary benchmark of 9,012 scans, outperforming both the confidence-gated cascade at 83.7% and GeoTransformer at 76.3%. We validate RMSE-based pose selection with independent survey control and trajectory consistency, and show that added Fourier-Mellin BEV proposals can reduce RMSE while increasing actual pose error under extreme partial overlap. The dataset and code are being prepared for public release.

Fine-grained RGBT image semantic segmentation is crucial for all-weather unmanned aerial vehicle (UAV) scene understanding. However, UAV RGBT image semantic segmentation faces two coupled challenges: cross-modal spatial misalignment caused by sensor parallax and platform vibration, and severe semantic confusion among fine-grained ground objects under top-down aerial views. To address these issues, we propose a Graph-based Semantic Calibration Network (GSCNet) for unaligned UAV RGBT image semantic segmentation. Specifically, we design a Feature Decoupling and Alignment Module (FDAM) that decouples each modality into shared structural and private perceptual components and performs deformable alignment in the shared subspace, enabling robust spatial correction with reduced modality appearance interference. Moreover, we propose a Semantic Graph Calibration Module (SGCM) that explicitly encodes the hierarchical taxonomy and co-occurrence regularities among ground-object categories in UAV scenes into a structured category graph, and incorporates these priors into graph-attention reasoning to calibrate predictions of visually similar and rare categories. In addition, we construct the Unaligned RGB-Thermal Fine-grained (URTF) benchmark, to the best of our knowledge, the largest and most fine-grained benchmark for unaligned UAV RGBT image semantic segmentation, containing over 25,000 image pairs across 61 semantic categories with realistic cross-modal misalignment. Extensive experiments on URTF demonstrate that GSCNet significantly outperforms state-of-the-art methods, with notable gains on fine-grained categories. The dataset is available at https://github.com/mmic-lcl/Datasets-and-benchmark-code.

Accurate classification of tropical tree species from unoccupied aerial vehicle (UAV) imagery remains challenging due to high species diversity and strong visual similarity among species at typical image resolutions (centimeters per pixel). In contrast, models trained on close-up citizen science photographs captured with smartphones achieve strong plant species classification performance. Recent advances in UAV data acquisition now enable the collection of close-up images that are spatially registered with top-view aerial imagery and approach the level of visual detail found in smartphone photographs, with the trade-off that such high-resolution photos cannot be acquired for many trees. In this work, we evaluate the performance of existing methods using paired top-view and close-up UAV imagery collected in a species-rich tropical forest. Through fine-tuning experiments, we quantify the performance gap between vision foundation models and in-domain generalist plant recognition models across both image types (high-resolution close-up versus coarser-resolution top-view imagery). We show that classification performance is consistently higher on close-up images than on top-view aerial imagery, and that this performance gap widens for rare species. Finally, we propose that self-supervised representation alignment across these two spatial scales offers a promising approach for integrating fine-grained visual information into canopy-level species classification models based on top-view UAV imagery. Leveraging high-resolution close-up UAV imagery to enhance canopy-level species classification could substantially improve large-scale monitoring of tropical forest biodiversity.

Recent advances in deep learning for remote sensing rely heavily on large annotated datasets, yet acquiring high-quality ground truth for geometric, radiometric, and multi-domain tasks remains costly and often infeasible. In particular, the lack of accurate depth annotations, controlled illumination variations, and multi-scale paired imagery limits progress in monocular depth estimation, domain adaptation, and super-resolution for aerial scenes. We present SyMTRS, a large-scale synthetic dataset generated using a high-fidelity urban simulation pipeline. The dataset provides high-resolution RGB aerial imagery (2048 x 2048), pixel-perfect depth maps, night-time counterparts for domain adaptation, and aligned low-resolution variants for super-resolution at x2, x4, and x8 scales. Unlike existing remote sensing datasets that focus on a single task or modality, SyMTRS is designed as a unified multi-task benchmark enabling joint research in geometric understanding, cross-domain robustness, and resolution enhancement. We describe the dataset generation process, its statistical properties, and its positioning relative to existing benchmarks. SyMTRS aims to bridge critical gaps in remote sensing research by enabling controlled experiments with perfect geometric ground truth and consistent multi-domain supervision. The results obtained in this work can be reproduced from this Github repository: https://github.com/safouaneelg/SyMTRS.

Self-supervised learning (SSL) is a standard approach for representation learning in aerial imagery. Existing methods enforce invariance between augmented views, which works well when augmentations preserve semantic content. However, aerial images are frequently degraded by haze, motion blur, rain, and occlusion that remove critical evidence. Enforcing alignment between a clean and a severely degraded view can introduce spurious structure into the latent space. This study proposes a training strategy and architectural modification to enhance SSL robustness to such corruptions. It introduces a per-sample, per-factor trust weight into the alignment objective, combined with the base contrastive loss as an additive residual. A stop-gradient is applied to the trust weight instead of a multiplicative gate. While a multiplicative gate is a natural choice, experiments show it impairs the backbone, whereas our additive-residual approach improves it. Using a 200-epoch protocol on a 210,000-image corpus, the method achieves the highest mean linear-probe accuracy among six backbones on EuroSAT, AID, and NWPU-RESISC45 (90.20% compared to 88.46% for SimCLR and 89.82% for VICReg). It yields the largest improvements under severe information-erasing corruptions on EuroSAT (+19.9 points on haze at s=5 over SimCLR). The method also demonstrates consistent gains of +1 to +3 points in Mahalanobis AUROC on a zero-shot cross-domain stress test using BDD100K weather splits. Two ablations (scalar uncertainty and cosine gate) indicate the additive-residual formulation is the primary source of these improvements. An evidential variant using Dempster-Shafer fusion introduces interpretable signals of conflict and ignorance. These findings offer a concrete design principle for uncertainty-aware SSL. Code is publicly available at https://github.com/WadiiBoulila/trust-ssl.

Referring detection refers to locate the target referred by natural languages, which has recently attracted growing research interests. However, existing datasets are limited to ground images with large object centered in relative small scenes. This paper introduces a large-scale challenging dataset for referring detection in aerial images, termed as RefAerial. It distinguishes from conventional ground referring detection datasets by 4 characteristics: (1) low but diverse object-to-scene ratios, (2) numerous targets and distractors, (3)complex and fine-grained referring descriptions, (4) diverse and broad scenes in the aerial view. We also develop a human-in-the-loop referring expansion and annotation engine (REA-Engine) for efficient semi-automated referring pair annotation. Besides, we observe that existing ground referring detection approaches exhibiting serious performance degradation on our aerial dataset since the intrinsic scale variety issue within or across aerial images. Therefore, we further propose a novel scale-comprehensive and sensitive (SCS) framework for referring detection in aerial images. It consists of a mixture-of-granularity (MoG) attention and a two-stage comprehensive-to-sensitive (CtS) decoding strategy. Specifically, the mixture-of-granularity attention is developed for scale-comprehensive target understanding. In addition, the two-stage comprehensive-to-sensitive decoding strategy is designed for coarse-to-fine referring target decoding. Eventually, the proposed SCS framework achieves remarkable performance on our aerial referring detection dataset and even promising performance boost on conventional ground referring detection datasets.

Automated wildlife monitoring from aerial imagery is vital for conservation but remains limited by two persistent challenges: the difficulty of detecting small, rare species and the high cost of large-scale expert annotation. Prairie dogs exemplify this problem -- they are ecologically important yet appear tiny, sparsely distributed, and visually indistinct from their surroundings, posing a severe challenge for conventional detection models. To overcome these limitations, we present RareSpot+, a detection framework that integrates multi-scale consistency learning, context-aware augmentation, and geospatially guided active learning to address these issues. A novel multi-scale consistency loss aligns intermediate feature maps across detection heads, enhancing localization of small (approx. 30 pixels wide) objects without architectural changes, while context-aware augmentation improves robustness by synthesizing hard, ecologically plausible examples. A geospatial active learning module exploits domain-specific spatial priors linking prairie dogs and burrows, together with test-time augmentation and a meta-uncertainty model, to reduce redundant labeling. On a 2 km^2 aerial dataset, RareSpot+ improves detection over the baseline mAP@50 by +35.2% (absolute +0.13). Cross-dataset tests on HerdNet, AED, and several other wildlife benchmarks demonstrate robust detector-level transferability. The active learning module further boosts prairie dog AP by 14.5% using an annotation budget of just 1.7% of the unlabeled tiles. Beyond detection, RareSpot+ enables spatial ecological analyses such as clustering and co-occurrence, linking vision-based detection with quantitative ecology.

Understanding road scenes in a geometrically consistent, scene-centric representation is crucial for planning and mapping. We present GOLD-BEV, a framework that learns dense bird's-eye-view (BEV) semantic environment maps-including dynamic agents-from ego-centric sensors, using time-synchronized aerial imagery as supervision only during training. BEV-aligned aerial crops provide an intuitive target space, enabling dense semantic annotation with minimal manual effort and avoiding the ambiguity of ego-only BEV labeling. Crucially, strict aerial-ground synchronization allows overhead observations to supervise moving traffic participants and mitigates the temporal inconsistencies inherent to non-synchronized overhead sources. To obtain scalable dense targets, we generate BEV pseudo-labels using domain-adapted aerial teachers, and jointly train BEV segmentation with optional pseudo-aerial BEV reconstruction for interpretability. Finally, we extend beyond aerial coverage by learning to synthesize pseudo-aerial BEV images from ego sensors, which support lightweight human annotation and uncertainty-aware pseudo-labeling on unlabeled drives.

Despite advances in object detection, aerial imagery remains a challenging domain, as models often fail to generalize across variations in spatial resolution, scene composition, and semantic label coverage. Differences in geographic context, sensor characteristics, and object distributions across datasets limit the capacity of conventional models to learn consistent and transferable representations. Shared methods trained on such data tend to impose a unified representation across fundamentally different domains, resulting in poor performance on region-specific content and less flexibility when dealing with novel object categories. To address this, we propose a novel modular learning framework that enables structured specialization in aerial detection. Our method introduces a hierarchical routing mechanism with two levels of modularity: a domain routing layer that uses latent geographic embeddings to assign inputs to domain-specialized expert modules, and a scene routing mechanism that allocates image subregions to scene-specific expert modules. This allows our method to specialize across datasets and within complex scenes. Additionally, the framework contains a conditional expert module that uses external semantic information (e.g., category names or textual descriptions) to enable detection of novel object categories during inference, without the need for retraining or fine-tuning. By moving beyond monolithic representations, our method provides an adaptive framework for remote sensing object detection. Comprehensive evaluations on four datasets highlight improvements in multi-dataset generalization, region-level specialization, and open-category detection.

Atmospheric haze significantly degrades wildlife imagery, impeding computer vision applications critical for conservation, such as animal detection, tracking, and behavior analysis. To address this challenge, we introduce AnimalHaze3k a synthetic dataset comprising of 3,477 hazy images generated from 1,159 clear wildlife photographs through a physics-based pipeline. Our novel IncepDehazeGan architecture combines inception blocks with residual skip connections in a GAN framework, achieving state-of-the-art performance (SSIM: 0.8914, PSNR: 20.54, and LPIPS: 0.1104), delivering 6.27% higher SSIM and 10.2% better PSNR than competing approaches. When applied to downstream detection tasks, dehazed images improved YOLOv11 detection mAP by 112% and IoU by 67%. These advances can provide ecologists with reliable tools for population monitoring and surveillance in challenging environmental conditions, demonstrating significant potential for enhancing wildlife conservation efforts through robust visual analytics.

Shadows are prevalent in high-resolution aerospace imagery (ASI). They often cause spectral distortion and information loss, which degrade downstream interpretation tasks. While deep learning methods have advanced natural-image shadow removal, their direct application to ASI faces two primary challenges. First, strictly paired training data are severely lacking. Second, homogeneous shadow assumptions fail to handle the broad penumbra transition zones inherent in aerospace scenes. To address these issues, we propose AeroDeshadow, a unified two-stage framework integrating physics-guided shadow synthesis and penumbra-aware restoration. In the first stage, a Physics-aware Degradation Shadow Synthesis Network (PDSS-Net) explicitly models illumination decay and spatial attenuation. This process constructs AeroDS-Syn, a large-scale paired dataset featuring soft boundary transitions. Constrained by this physical formulation, a Penumbra-aware Cascaded DeShadowing Network (PCDS-Net) then decouples the input into umbra and penumbra components. By restoring these regions progressively, PCDS-Net alleviates boundary artifacts and over-correction. Trained solely on the synthetic AeroDS-Syn, the network generalizes to real-world ASI without requiring paired real annotations. Experimental results indicate that AeroDeshadow achieves state-of-the-art quantitative accuracy and visual fidelity across synthetic and real-world datasets. The datasets and code will be made publicly available at: https://github.com/AeroVILab-AHU/AeroDeshadow.

Accurate estimation of forest biomass, a major carbon sink, relies heavily on tree-level traits such as height and species. Unoccupied Aerial Vehicles (UAVs) capturing high-resolution imagery from a single RGB camera offer a cost-effective and scalable approach for mapping and measuring individual trees. We introduce BIRCH-Trees, the first benchmark for individual tree height and species estimation from tree-centered UAV images, spanning three datasets: temperate forests, tropical forests, and boreal plantations. We also present DINOvTree, a unified approach using a Vision Foundation Model (VFM) backbone with task-specific heads for simultaneous height and species prediction. Through extensive evaluations on BIRCH-Trees, we compare DINOvTree against commonly used vision methods, including VFMs, as well as biological allometric equations. We find that DINOvTree achieves top overall results with accurate height predictions and competitive classification accuracy while using only 54% to 58% of the parameters of the second-best approach.

We present a large-scale unmanned aerial vehicle (UAV)-based RGB and multispectral image dataset collected over paddy fields in the Vijayawada region, Andhra Pradesh, India, covering nursery to harvesting stages. We used a 20-megapixel RGB camera and a 5-megapixel four-band multispectral camera capturing red, green, red-edge, and near-infrared bands. Standardised operating procedure (SOP) and checklists were developed to ensure repeatable data acquisition. Our dataset comprises of 42,430 raw images (415 GB) captured over 5 acres with 1 cm/pixel ground sampling distance (GSD) with associated metadata such as GPS coordinates, flight altitude, and environmental conditions. Captured images were validated using Pix4D Fields to generate orthomosaic maps and vegetation index maps, such as normalised difference vegetation index (NDVI) and normalised difference red-edge (NDRE) index. Our dataset is one of the few datasets that provide high-resolution images with rich metadata that cover all growth stages of Indian paddy crops. The dataset is available on IEEE DataPort with DOI, . It can support studies on targeted spraying, disease analysis, and yield estimation.

We introduce KAMERA: a comprehensive system for multi-camera, multi-spectral synchronization and real-time detection of seals and polar bears. Utilized in aerial surveys for ice-associated seals in the Bering, Chukchi, and Beaufort seas around Alaska, KAMERA provides up to an 80% reduction in dataset processing time over previous methods. Our rigorous calibration and hardware synchronization enable using multiple spectra for object detection. All collected data are annotated with metadata so they can be easily referenced later. All imagery and animal detections from a survey are mapped onto a world plane for accurate surveyed area estimates and quick assessment of survey results. We hope KAMERA will inspire other mapping and detection efforts in the scientific community, with all software, models, and schematics fully open-sourced.

The increasing accessibility of radiometric thermal imaging sensors for unmanned aerial vehicles (UAVs) offers significant potential for advancing AI-driven aerial wildfire management. Radiometric imaging provides per-pixel temperature estimates, a valuable improvement over non-radiometric data that requires irradiance measurements to be converted into visible images using RGB color palettes. Despite its benefits, this technology has been underutilized largely due to a lack of available data for researchers. This study addresses this gap by introducing methods for collecting and processing synchronized visual spectrum and radiometric thermal imagery using UAVs at prescribed fires. The included imagery processing pipeline drastically simplifies and partially automates each step from data collection to neural network input. Further, we present the FLAME 3 dataset, the first comprehensive collection of side-by-side visual spectrum and radiometric thermal imagery of wildland fires. Building on our previous FLAME 1 and FLAME 2 datasets, FLAME 3 includes radiometric thermal Tag Image File Format (TIFFs) and nadir thermal plots, providing a new data type and collection method. This dataset aims to spur a new generation of machine learning models utilizing radiometric thermal imagery, potentially trivializing tasks such as aerial wildfire detection, segmentation, and assessment. A single-burn subset of FLAME 3 for computer vision applications is available on Kaggle with the full 6 burn set available to readers upon request.