Visual-to-Tactile Prediction

Contact locations and interaction forces are critical for contact-rich robot manipulation but are often ambiguous from vision alone. Measuring them on robots requires specialized tactile hardware and platform-specific data collection, which keeps robot tactile data scarce. Human egocentric video is far easier to scale but lacks touch. Recent predictors trained on egocentric recordings paired with tactile-glove measurements can predict this missing signal from video alone. These predictors, however, remain confined to human hands, which differ from robot hands in appearance and tactile layout. We present Ego2Contact, which learns a visual-tactile prior from human interactions and transfers it to robot hands. Its predictor fuses temporal scene context with hand-local visual features to infer bimanual tactile fields from the RGB video. Anatomical region correspondences align varying robot tactile layouts with the predictor's canonical grid, turning robot measurements into fine-tuning targets and predictions into policy inputs. Ego2Contact outperforms prior tactile predictors on human data, including unseen objects, and on robot data after adaptation. The adapted predictor provides tactile inputs for both simulated reinforcement learning and real-robot policy post-training. In simulation, policies using predicted touch outperform non-tactile baselines and recover part of the benefit of ground-truth tactile sensing. These results show that human-learned tactile priors can supply touch when direct tactile sensing is limited.

Large-scale egocentric human interaction data is becoming an important source of physical supervision for embodied learning, yet video alone leaves the contact and pressure that characterize physical interaction unrecorded. Recent visual-tactile datasets provide this missing supervision, but their synchronized tactile data remain far smaller in volume than human video. Moreover, the largest resources often merge recordings from different sensors or annotation procedures, which makes the effect of data scale difficult to isolate. We therefore introduce TouchScale, a 500-hour dataset of contact-rich human interaction recorded with a single unified wearable setup. Its approximately 2K predefined task descriptions span everyday activities and structured manipulation, and each recording temporally aligns egocentric RGB-D video with wrist RGB video and dense full-hand bimanual tactile measurements. Compared with prior tactile data, training on the full TouchScale raises zero-shot contact IoU on data from an unseen tactile sensor from 0.134 to 0.383. Pretraining a visual encoder on TouchScale also yields the highest action recognition accuracy on three benchmarks among the compared visual-tactile datasets. Used for visual-tactile mid-training of a robot policy, TouchScale improves the average real-world success rate across four contact-rich manipulation tasks from 22.5% to 57.5%. With the sensor and collection protocol held fixed, both zero-shot tactile prediction and robot success show an overall upward trend as more TouchScale data is used. These results suggest that human visual-tactile data collected at scale with consistent sensing benefits both perception and robot manipulation. We will publicly release TouchScale, including all synchronized visual-tactile recordings and reconstructed object models, to support future research on scalable visual-tactile learning.

Realistic physical interaction is a cornerstone of embodied intelligence, yet collecting paired visual--tactile data remains costly. Visual-to-tactile synthesis offers a promising approach to augmenting such data, but learning this mapping is complicated by the gap between visual appearance and contact-related material properties, as well as spatial misalignment in paired observations. To address these challenges, we present PhysTacGen, a visual-to-optical-tactile image generation framework that integrates material-aware descriptions with geometric conditioning. First, we introduce Group Tactile Policy Optimization (GTPO), a reinforcement learning strategy that refines a vision--language model to generate structured material descriptions using task-specific rewards. Second, we combine DINOv2-based pair curation with monocular relative-depth estimation to select training pairs and provide geometric priors. Finally, an SDXL ControlNet synthesizes optical tactile images conditioned on RGB, relative depth, and GTPO-generated text. Experiments on curated SSVTP data demonstrate improved structural similarity over the compared baselines, while a blinded user study shows a preference for GTPO-generated descriptions. Generated tactile inputs also improve performance on an attribute-derived force-coefficient prediction proxy. Together, these results demonstrate the effectiveness of PhysTacGen for optical tactile image synthesis and its utility in the evaluated downstream task.The code will be available at https://github.com/VDIGPKU/PhysTacGen.

Human video offers a scalable source of experience for dexterous robot learning, but obtaining motion and tactile supervision while preserving bare hand interaction remains challenging. We present ExoBridge, a framework that leverages human limb coupling to learn a bridging function from bare hand video to the motion and tactile state of a sensorized exoskeleton. Our central idea is to use coordinated bimanual behavior to connect an uninstrumented visual source with a measured manipulation interface. During collection, one hand remains bare and provides visual observations, while the opposite hand wears the exoskeleton and supplies synchronized motion and tactile measurements. These paired demonstrations train a temporal visual model to predict fingertip contact, continuous tactile intensity, and relative encoder motion from bare hand video alone. The exoskeleton defines an intermediate state space whose motion coordinates are linked to a dexterous robot hand through existing calibration. Evaluation on 1,215 demonstrations across four manipulation tasks uses held out collection sessions and yields a pooled any contact AUROC of 0.916 and a Pearson correlation of 0.790 for tactile intensity. The learned bridge also predicts relative changes in exoskeleton configuration from bare hand video. These results demonstrate that human limb coupling can turn exoskeleton measurements into supervision for bare hand video, establishing a learned bridge between human visual demonstrations and a robot oriented manipulation interface.

Contact-rich manipulation requires estimating forces, slip and contact geometry that can remain ambiguous in scene images. Optical tactile sensors provide both visual observations of the contact surface and mechanical measurements, yet learning from these signals raises two challenges: representing contact beyond appearance and transferring its benefits to a policy that does not require fingertip observations at deployment. We introduce HapticWAM, a world-action model that combines heterogeneous tactile encoding, structured contact prediction and teacher-student distillation. Its teacher encodes gel images together with deformation, shear, distributed forces, resultant wrench and derived contact state into a frozen video backbone. Rather than predicting tactile pixels alone, the model jointly generates actions and a contact package describing future events and mechanics. Anticipatory Contact Coupling uses the previously imagined package to condition attention, preserving a contact-related input when direct tactile observations are unavailable. Haptic-Imagination Distillation transfers both contact futures and action predictions to a student that retains the generative contact head but removes its fingertip input branches. On a real-world setup, across three contact-rich pick-and-place tasks, HapticWAM Student achieves a 77% per-task mean success rate (41 of 50 starts, 82% pooled), reaching 95% on one of the tasks, outperforming the evaluated teacher and baseline configurations.

Reliable robotic grasping benefits from estimating the evolving physical interaction and selecting a grasp-dependent compression target. Tactile sensors provide direct interaction measurements but require dedicated hardware at deployment. We introduce ZeroTouch, a tactile-supervised framework that predicts dense contact deformation, the instantaneous six-axis wrench, and a grasp-dependent desired compression target from wrist RGB observations, gripper state, and local gravity direction. Tactile measurements are used only as privileged supervision during training and are not required at deployment. On the full validation set, the complete architecture reduces normal-force MAE from 2.017 N for a state-only baseline to 0.531 N. In physical evaluation with 20 trials per condition, ZeroTouch achieves 95% success on an unseen object, 80% in a seen-object/unseen-grasp condition, and 90% under a content/load shift. Under the same evaluation protocol, OpenVLA achieves 25%, 40%, and 55%, while SmolVLA achieves 10%, 25%, and 35%, respectively.

Tactile signals provide direct contact and force measurements that are essential for understanding physical interactions and enabling dexterous robotic manipulation. However, tactile sensing requires direct measurement at contact interfaces, making large-scale data collection reliant on intrusive, costly, and restrictive instrumentation. We present TouchSight, a monocular egocentric vision framework for dense full-hand contact force prediction that leverages 500 hours of pressure-glove recordings and extensive hand-object interaction (HOI) data. To address the appearance gap between gloved training data and bare-hand real-world scenarios, we construct TwinTouch-20H: 20 hours of paired visual data in which generative video models re-render gloved recordings as bare-hand observations against new backgrounds while preserving the original measured tactile labels. TouchSight predicts dense force from both gloved and generated bare-hand videos, outperforms prior contact prediction methods on OakInk2, qualitatively generalizes to natural bare-hand egocentric videos from unseen datasets, and improves consistently as glove supervision scales. These results demonstrate that dense tactile signals can be recovered from egocentric vision alone, without tactile instrumentation at capture time.

Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.

Accurate tactile forecasts need not improve force-constrained control. We study a 652,157-parameter action-conditioned visuotactile world model with matched behavior cloning, policy learning in imagination, independent reactive implicit Q-learning, and model-assisted force feedback. A fixed protocol executes 34 policies on 120 fresh MuJoCo environments spanning geometry and physical-parameter shifts, plus 324 independently replayed action branches on 12 additional ID environments. Visuotactile dynamics reduce force action-effect MAE from 0.413 N for persistence to 0.338 N. Model-assisted feedback raises ID force-budgeted success from 73.3% to 93.3%, with paired difference +20.0 [+6.7,+33.4] percentage points (95% CI), with the difference occurring during scripted lowering. Its pooled difference is +3.9 [-4.5,+11.7] points. Imagined RL achieves 11.9% pooled joint success versus 25.0% for reactive IQL. An empirical tactile-residual stress test adds 330 executions. The evidence concerns rigid-box lifting after a common approach, without physical-robot transfer or a closed-loop safety guarantee.

Touch is fundamental to dexterous manipulation, yet most egocentric human data increasingly used for robot learning lacks tactile information. Directly collecting large-scale tactile data is challenging due to sensor limitations, while human video data is abundant, contact-rich, and easily scalable. This motivates a natural question: can tactile signals be inferred purely from vision? To address this, we introduce EgoTac, a generalizable model that predicts rich tactile information directly from egocentric human videos. EgoTac is trained on a unified corpus of over 5.7M image-tactile pairs, covering both continuous force measurements and binary contacts. By learning from this diverse dataset, EgoTac captures nuanced touch dynamics across varied interactions. Experiments demonstrate strong performance: in-domain prediction achieves an average force error below 0.06N. On out-of-domain contact prediction benchmarks, EgoTac consistently outperforms the state-of-the-art contact estimator. It also captures the rise and fall patterns of real tactile data and enables zero-shot predictions on unconstrained real-world videos. Scaling analyses further reveal that both data diversity and volume improve performance steadily. Overall, EgoTac provides a scalable pathway to extract tactile priors from egocentric human videos, enabling broadly applicable tactile-aware robot learning. Related resources can be found at https://egotac.github.io/ .

Tactile sensing can improve performance in contact-rich robot manipulation. However, learning policies that use real tactile feedback typically requires demonstrations collected with tactile-equipped hardware. We present Feature-Extracted Latent Tactile (FELT), a framework that uses existing paired visuo-tactile data to learn contact-aware representations from RGB observations. FELT provides these representations to downstream policies through two interfaces: generated tactile images and contact-aware features. FELT combines a frozen visual encoder with separate query decoders for the left and right finger, reflecting the spatial organization of dual-finger tactile arrays. The two branches exchange information through gated connections, and a convolutional readout produces spatial contact representations for the downstream interfaces. For downstream manipulation, the image interface decodes these spatial representations into tactile images, allowing policies trained with either real or generated tactile observations to use generated images at deployment. Alternatively, the feature interface feeds these representations directly to the policy during both training and deployment, without real tactile observations. Experiments on four contact-rich real-robot tasks show that both interfaces achieve higher success rates than vision-only policies. Directly incorporating learned contact-aware features into the policy improves success by 15-22.5 percentage points across the four tasks.

Tactile sensing can substantially improve contact-rich robotic manipulation, yet its practical deployment remains limited by the fragility, calibration requirements, and maintenance burden of tactile hardware. This raises a fundamental question: can robots benefit from tactile knowledge without requiring tactile sensors at deployment? We present TacImag, a tactile imagination framework that predicts tactile observations from vision and proprioception and uses the generated signals to guide manipulation policies. Trained from paired visuotactile demonstrations, TacImag enables touch-informed manipulation using only visual observations at test time. We evaluate TacImag on six simulated and four real-world manipulation tasks. Across simulation and real-world experiments, imagined tactile observations consistently improve manipulation performance without requiring tactile hardware. In real-world experiments, imagined force fields improve contact-sensitive tasks by 44.4% on average, whereas imagined tactile images improve texture-sensitive tasks by 23.3%, revealing that the effectiveness of tactile imagination depends strongly on the relationship between tactile representation and task requirements. Our results further suggest that tactile imagination does not simply recover missing tactile measurements. Instead, it acts as a form of contact-aware supervision that transforms subtle visual interaction cues into representations that are easier for manipulation policies to exploit.

Vision-language-action (VLA) models have achieved strong performance in many robotic manipulation tasks, yet remain limited in contact-rich dexterous manipulation. To overcome this limitation, recent vision-tactile-language-action (VTLA) methods incorporate tactile sensing into VLA models to provide direct contact information. However, they typically treat tactile signals as passive auxiliary inputs, making it difficult to model tactile semantics and future physical interactions. To this end, we propose a unified tactile learning framework for contact-rich manipulation that models tactile signals as dynamic interaction cues for both contact understanding and prediction. Specifically, we construct a unified tactile latent space and jointly model current tactile states and future contact changes through tactile chain-of-thought reasoning and coarse-to-fine future tactile prediction, thereby forming a state-aware and dynamics-aware tactile prior. Based on this prior, we introduce a tactile-action mixed controller that combines real-time and predicted tactile feedback to refine low-frequency action chunks with high-frequency corrections. Real-world experiments on four categories of contact-rich tasks, including adjustment, insertion, wiping, and assembly, under both clean and externally perturbed settings, show that our method improves success rate, manipulation accuracy, and contact robustness over existing methods, demonstrating its effectiveness in dexterous physical interaction.

Touch resolves the physical-property ambiguity left by vision: exploratory contact recovers shape, texture, compliance, and material, and visuo-haptic object representations converge in ventral visual cortex. We ask whether representation learning can reproduce this grounding. TacGen mitigates the tactile-data scarcity bottleneck by combining pre-specified V+T contrastive alignment with a latent-space residual-MLP V->T generator that synthesizes tactile latents from RGB for tactile-data scaling. With matched DINOv2 backbones, splits, and probes, V+T improves matched V-only on mass (Delta R^2=+0.570), density (Delta acc=+0.067), hardness (+0.117), and uncertainty-banded force labels (Delta R^2=+0.281); all CIs exclude zero. The same representation lifts matched-capacity TACTO manipulation 0.246->0.979 while V-only capacity scaling accounts for only 4.5% of the gap, preserving 95.5%. The generator reaches cross-seed +0.589, with real tactile +0.585 inside the seed interval; the architecture comparison shows a 13pp downstream gap between reconstruction quality and representation utility. Across five-seed SSVTP/TVL reproductions, YCB-Sight transfer, three-backbone checks, permutation/random-feature controls, hash-verified manifests, and measured-force validation checks, the evidence supports the claim that touch supplies a necessary physical evidence channel for representations of contact-dependent properties.

Observing touch on another's body can elicit corresponding tactile sensations in the observer, a phenomenon termed mirror touch that supports empathy and social perception. This visuo-tactile resonance is thought to rely on structural correspondence between visual and somatosensory cortices, yet robotic systems lack computational frameworks that instantiate this principle. Here we demonstrate that cortical correspondence can be operationalized to endow robots with mirror touch. We introduce Mirror Touch Net, which imposes semantic, distributional and geometric alignment between visual and tactile representations through multi-level constraints, enabling prediction of millimetre-scale tactile signals across 1,140 taxels on a robotic hand from RGB images. Manifold analysis reveals that these constraints reshape visual representations into geometry consistent with the tactile manifold, reducing the complexity of cross-modal mapping. Extending this alignment framework to cross-domain observations of human hands enables tactile prediction and reflexive responses to observed human touch. Our results link a neural principle of visuo-tactile resonance to robotic perception, providing an explainable route towards anticipatory touch and empathic human-robot interaction. Code is available at https://github.com/fun0515/Mirror-Touch-Net.

Egocentric human video data, which captures rich human-environment interactions and can be collected at scale, has become a key driver of embodied intelligence research. However, existing egocentric datasets typically lack tactile sensing, a critical modality that provides direct cues about contact, force, and pressure in human-object interaction. Without such signals, models struggle to learn physically grounded representations of real-world interaction dynamics. While tactile sensors provide these cues, deploying high-quality tactile hardware at scale remains expensive and cumbersome. This raises a central question: can tactile feedback be inferred directly from visual observations, enabling scalable tactile supervision for egocentric video data and supporting physically grounded embodied learning? To enable research in this direction, we introduce EgoTouch, a large-scale multi-view egocentric dataset with dense tactile supervision for bimanual hand-object interaction. EgoTouch comprises 208 manipulation tasks spanning 1,891 episodes in diverse indoor and outdoor environments, with synchronized multi-view RGB (head-mounted egocentric and dual wrist-mounted cameras), bimanual 3D hand pose, and continuous pressure maps from wearable tactile sensors. Building on EgoTouch, we introduce TouchAnything, a baseline multi-view vision-to-touch prediction framework that uses the egocentric view as the primary input and flexibly leverages available wrist-mounted views at inference time. Experiments show that incorporating wrist-mounted views generally improves tactile prediction over egocentric-only input, achieving up to 5.0% relative improvement in Contact IoU and 6.1% relative improvement in Volumetric IoU. We will publicly release the dataset, code, and benchmark.

Tactile sensation is essential for contact-rich manipulation tasks. It provides direct feedback on object geometry, surface properties, and interaction forces, enhancing perception and enabling fine-grained control. An inherent limitation of tactile sensors is that readings are available only when an object is touched. This precludes their use during planning and the initial execution phase of a task. Predicting tactile information from visual information can bridge this gap. A common approach is to learn a direct mapping from camera images to the output of vision-based tactile sensors. However, the resulting model will depend strongly on the specific setup and on how well the camera can capture the area where an object is touched. In this work, we introduce FlowTouch, a novel model for view-invariant visuo-tactile prediction. Our key idea is to use an object's local 3D mesh to encode rich information for predicting tactile patterns while abstracting away from scene-dependent details. FlowTouch integrates scene reconstruction and Flow Matching-based models for image generation. Our results show that FlowTouch is able to bridge the sim-to-real gap and generalize to new sensor instances. We further show that the resulting tactile images can be used for downstream grasp stability prediction. Our code, datasets and videos are available at https://flowtouch.github.io/