A Geometry-Informed Computer Vision Method for Detecting and Examining Overtaking Vehicles From A Bicycle
Authors: Gandhimathi Padmanaban, Rayane Moustafa, Fred Feng
Organizations: Department of Industrial Manufacturing and Systems Engineering, University of Michigan-Dearborn, Michigan, USA, 48128
Abstract
Instrumented bicycle studies have produced direct field evidence on vehicle passing behavior, but extracting overtaking events from continuous rear-facing video has remained dependent on manual, frame-by-frame annotation. This bottleneck constrains sample sizes and limits naturalistic cycling safety research. We present a geometry-informed computer vision pipeline that automates overtaking event detection from a single bicycle-mounted camera without multi-sensor configurations or explicit camera calibration. The system combines RT-DETR object detection with ByteTrack multi-object tracking through a three-stage geometric validation module enforcing bearing angle trend, apparent size growth, and spatial confirmation criteria derived from perspective projection principles. Validated on 315 manually annotated real-world overtaking events from urban roads in Ann Arbor, Michigan, the pipeline achieved 97.8% recall with zero false positives. The system identified overtaking intentions a mean of 2.44 seconds before vehicle passage, with 84.1% of events exceeding the 1.5-second human reaction time threshold, demonstrating feasibility for active cyclist warning. Lateral passing distance measurements from 96 events revealed 33.3% of passes below the 5-foot (152.4 cm) threshold, consistent with non-compliance rates in prior field and self-reported studies. A preliminary calibration-free lateral distance estimation approach using bounding box geometric features achieved mean absolute errors of 13-14 cm under leave-one-out cross-validation, sufficient to distinguish close passes from standard passes for safety categorization. By automating event isolation from consumer-grade footage, the system removes the primary annotation bottleneck of instrumented bicycle research and provides a scalable foundation for vehicle-bicycle interaction analysis across larger datasets and diverse urban environments.
Vehicle body type is a significant determinant of cyclist injury severity in overtaking crashes, yet automated tools for classifying vehicles into injury-risk-relevant categories from naturalistic roadway video do not exist in the open literature. Standard object detection benchmarks provide only coarse vehicle labels (car, truck, bus, motorcycle), while existing fine-grained recognition systems are trained on controlled imagery and lack evaluation for deployment robustness across recording sites. This paper presents an open-source two-stage computer vision pipeline combining a pre-trained RT-DETR detector for coarse vehicle localization with a fine-tuned Vision Transformer (ViT-Base/16) for six-category body-type classification: passenger car, SUV, pickup truck, minivan, large van, and commercial truck. A confidence-based abstention mechanism withholds Stage 2 predictions when softmax output falls below 0.60, producing unknown labels rather than silent misclassifications. Evaluated on 3,805 annotated overtaking events from a bicycle-lane corridor in Ann Arbor, Michigan (in-distribution), the pipeline achieved 0.94 accuracy with per-class F1 scores from 0.91 (minivan) to 0.97 (SUV). On an independent out-of-distribution evaluation of 311 events from an open cycling dataset without retraining, accuracy was 0.89. Three of four well-represented categories maintained F1 at or above 0.90 under domain shift. The largest degradation was observed for minivan (F1 = 0.72), driven by abstention rate rising from 2.4% to 25.0% rather than active misclassification, consistent with the mechanism propagating genuine model uncertainty. The full pipeline, including inference scripts, training code, evaluation utilities, and model weights, is released as open-source software to support reproducibility and reuse across roadside video archives and cycling safety research.
Collisions between cyclists and pedestrians at urban intersections remain a persistent source of injuries, yet few systems attempt real-time warnings to unequipped road users using commodity hardware. We present a prototype collision warning system that runs on a single edge device with a wide-angle fisheye camera, producing audible and visual alerts at 30,fps. The system makes four contributions. First, we develop a calibration pipeline for ultra-wide fisheye lenses that overcomes corner-detection failure and optimizer divergence through perspective remapping and direct bundle adjustment. Second, we combine fisheye-aware object detection with a closed-form ground-plane projection via a precomputed lookup table. Third, we introduce a design-time conformance simulation with 24 scripted hazard scenarios, stochastic size-aware detection failures, and a latency sweep showing that a first-order kinematic predictor maintains the mean warning budget above the distracted-pedestrian reaction time across realistic camera latencies. Fourth, we formalize the decision layer as a separable, auditable testbench with explicit deployment gates, contestability mechanisms, and a residual risk register. Under conformance testing with fisheye localization error, the selected pipeline configuration achieves 93.3% sensitivity and 92.3% specificity, with a mean warning budget of 3.3,s. The system design was informed by community-aided design workshops. Code and replication scripts are available at https://github.com/mkturkcan/bikeped.
Reliable 3D perception of vulnerable road users (VRUs) such as cyclists and pedestrians is essential for their safety in urban traffic and a core requirement for autonomous driving (AD). Alongside advances in vehicle-based perception, research increasingly equips bicycles with sensors to study traffic from a perspective native to VRUs. Such platforms still rely on LiDAR detectors originally trained on vehicle data, yet annotated 3D data from a cyclist's perspective is scarce. How well these detectors generalise to this setting has not been evaluated. We present a 3D object detection benchmark of 1,027 annotated LiDAR keyframes (over 18,000 3D bounding boxes) from the FUSE-Bike platform in urban Munich. We evaluate four nuScenes-pre-trained detectors against 1,854 human-verified ground-truth (GT) boxes both in their original form and after finetuning on training labels produced by a VRU-dedicated auto-labelling pipeline that requires no manual annotation. The zero-shot domain gap is concentrated on the VRU classes. Finetuning recovers most of it, improving mean average precision (mAP) by up to 23.4 points with the largest gains on pedestrians and cyclists, and the adapted detectors even surpass the quality of the auto-labels they were trained on. The benchmark provides a reproducible baseline for VRU-centric 3D detection and shows that auto-labels are a viable substitute for manual annotation when adapting vehicle-trained detectors to a cyclist platform.
Mario Finkbeiner, Max A. Buettner, Kanak Mazumder +1