Ground Plane-Aided Extrinsic Calibration of Inertial and RGB-D Sensors for Uncrewed Aerial Vehicles
Authors: Ilyar Asl Sabbaghian Hokmabadi, Mahdis Bisheban
Organizations: Postdoctoral Associate, Department of Mechanical and Manufacturing Engineering, 40 Research Pl NW, Calgary · Assistant Professor, Department of Mechanical and Manufacturing Engineering, 40 Research Pl NW, Calgary, AIAA Member. This work was supported by the Natural Sciences and Engineering Research Council of Canada (NSERC), the Government of Alberta, Alberta Innovates, and the Schulich School of Engineering at the University of Calgary. Funding was awarded to Dr. Mahdis Bisheban, Director of the Intelligent Dynamics and Control Lab and Assistant Professor at the University of Calgary.
Abstract
Accurate extrinsic calibration of inertial sensors, such as Inertial Measurement Units (IMUs) and cameras is crucial for trajectory estimation of Uncrewed Aerial Vehicles (UAVs). While numerous calibration methods have been proposed, these techniques often rely on specialized equipment, planar targets, and an initial estimate of the calibration parameters. In this research, we propose a targetless calibration method designed for UAVs equipped with IMUs and RGB-Depth (RGB-D) cameras. Our approach leverages deep-learning-based floor-segmentation to extract ground points from the depth channel of RGB-D images. Subsequently, the normal vector to these points is estimated. The known orientation of the normal to the floor segment and the gravity vector sensed in the accelerometer's frame are utilized in a robust estimation approach to estimate the extrinsic calibration parameters. We illustrate that the developed method outperforms MATLAB's Toolboxes and exhibits similar performance to Kalibr without the use of specialized checkerboard targets.
Accurate camera-LiDAR calibration is a prerequisite for robust multi-modal perception in robotics. Recent target-less approaches based on deep point correspondences achieve remarkable performance for extrinsic calibration but assume rectified images with known intrinsics. In this work, we overcome this limitation and present the first fully target-less pipeline that jointly estimates camera intrinsics (pinhole model with radial-tangential distortion) and camera-LiDAR extrinsics with deep pixel-point correspondences. Our approach extends deep correspondence-based calibration by (i) automatic intrinsic initialization via structure-from-motion, (ii) generalizing camera-LiDAR matching to raw images with unknown intrinsics including distortion, and (iii) tightly coupling correspondence estimation with joint nonlinear optimization over both intrinsics and extrinsics. We evaluate our method on the KITTI dataset with unseen camera-LiDAR pairs and demonstrate that joint calibration achieves improved extrinsic accuracy while additionally recovering accurate intrinsics.
Monocular depth estimation is a fundamental prerequisite for 3D reconstruction and autonomous navigation in Unmanned Aerial Vehicles (UAVs). In practical deployments, UAVs operate under highly dynamic camera poses characterized by continuous variations in height, pitch, roll, and field of view (FOV). Existing monocular depth estimation methods frequently fail to generalize across such diverse perspectives and the expansive scale of depth distributions inherent in aerial scenes. To address these challenges, we establish a quantitative representation of UAV viewing angles through rigorous theoretical analysis, deriving the geometric correspondence between viewing angles and view distances using the ground plane as a reference for observation. Building upon this, we propose Depth Estimation for Any Perspectives Model (DAPM), representing the first monocular framework specifically designed for UAV aerial imagery to jointly estimate camera pose and depth under continuously varying viewpoints. Specifically, we introduce an Ideal Ground Depth (IGD) module that leverages the derived geometric relationships between UAV perspectives and view distances to implement dense camera-pose supervision and enhance depth features. And we further develop a coarse-to-fine Progressive Quantization Bins (PQB) module. By incorporating progressive supervision and hierarchical quantization bins, the PQB module enables robust estimation in complex UAV aerial imagery. To evaluate the proposed framework, we present the UAV Any Perspectives Depth (UAPD) dataset, featuring comprehensive and continuous distributions of pose parameters. Experimental results on UAPD demonstrate that DAPM achieves state-of-the-art performance across both depth and camera-pose estimation metrics. The source code and datasets are available at: https://github.com/ThisIsLT/DAPM.
The Doppler velocity log (DVL) velocity measurements are critical to the accuracy of autonomous underwater vehicle (AUV) navigation solutions and, consequently, to mission success. To ensure accurate measurements, the DVL is commonly calibrated before mission start while the AUV sails on the water surface, receiving global navigation satellite system (GNSS) signals that provide accurate reference measurements. Conventionally, Kalman filter-based approaches are employed during calibration to estimate the scale factor and misalignment errors. However, in certain environments, GNSS signals may be unavailable, rendering conventional calibration impossible and forcing the use of uncalibrated DVL measurements, which degrades navigation performance. To address this limitation, this work proposes information-aided calibration (IAC) with two main contributions: first, improving the accuracy of conventional Kalman filter-based calibration in GNSS-enabled environments, and second, enabling GNSS-free DVL self-calibration. Using real-world AUV datasets, the proposed IAC models achieve up to a 20% average improvement in GNSS-enabled environments and up to a 35% improvement in velocity vector estimation during GNSS-free DVL self-calibration. Overall, the proposed approach improves navigation accuracy, reduces navigation drift, and consequently enhances mission reliability.