Needles in a Raystack: Ultra-Sparse LiDAR Occupancy Detection for Bat Tracks

Multimodal 3D object detection based on LiDAR and cameras has demonstrated excellent performance in ground-vehicle scenarios, but has not been explored for Unmanned Aerial Vehicle (UAV) platforms. In UAV top-down scenes, frequent groundobject occlusion dominated by tree canopies causes spatially varying and modality-dependent information degradation. Existing multimodal fusion frameworks neither explicitly model such ground-object occlusion nor embed occlusion awareness into the detection pipeline, limiting their performance in occluded UAV scenes. To address these challenges, we propose CAMF-Det, a closure-aware multimodal fusion framework for LiDAR-camera 3D object detection on UAV platforms, which derives dual-modal occlusion intensity through physics-inspired modeling and embeds them as priors throughout the detection pipeline. First, a dual-modal closure modeling module explicitly constructs occlusion intensity ground truth for both modalities offline via a Beer-Lambert-inspired formulation and building-mask correction. Second, using these ground-truth maps as supervision, a dual-modal prediction network converts the offline modeling results into online occlusion intensity predictions under single-frame inference. Third, both ground-truth and predicted occlusion intensity are injected into data augmentation, feature encoding, multimodal fusion, and detection head, enabling adaptive detection under spatially varying and modality-dependent information degradation. Experiments on two self-built UAV-based multimodal datasets, SI3D-DI and SI3D-DII, demonstrate that CAMF-Det achieves the best performance across all difficulty levels, with hard-level mAP$_{\mathrm{BEV}}$ improvements of 9.43% and 4.88% over the best competing methods, respectively. These results confirm the effectiveness of explicit occlusion prior modeling and exploitation for robust multimodal 3D detection in UAV scenes.

3D object detection is the backbone of perception for automated vehicles (AV) and broader intelligent transportation systems applications. Long-range detection is challenging because sensing evidence is sparse; yet this long-range'' scenario is routine in traffic. Although >30m is often labeled long-range in computer vision, on roadways it affords only approx. 1-2s for perception and decision-making. Under such extreme sparsity, two core challenges arise. First, early multimodal fusion tends to discard sparsity information and inject noise from empty or falsely occupied cells, degrading long-range recall. Second, context-agnostic uniform channel supervision favors dense and near-range samples, leaving far and small objects under-optimized, delaying the earliest detection of distant objects. We propose Ask The Neighbor'' (ATN3D), a LiDAR-Radar framework tailored for sparse-range conditions. ATN3D introduces (i) Density-aware early fusion with cross-modal gating that conditions fusion on per-voxel density/sparsity and Radar evidence, (ii) Occupancy-gated neighborhood aggregation with circular kernels to aggregate only from credible cells, (iii) Evidence-conditioned channel self-attention to adapt channel weights with weather/range, and (iv) a Range-aware loss that re-balances classification and localization by distance, aligning training with distance-stratified evaluation. On the VoD benchmark across clear and foggy conditions, ATN3D surpasses strong baselines: +3.55% mAP in clear weather and +8.41% mAP under simulated heavy fog; for >30m objects, gains are +3.33% (clear) and +2.09% (heavy fog). These results indicate earlier and more reliable long-range detections under sparse sensing in on-road traffic.

6-DoF LiDAR-based localization is a fundamental capability for autonomous systems operating in large-scale outdoor environments. Many deep-learning-based localization methods have achieved promising performance so far. However, as one of the always-on modules competing for limited on-board computational resources, the localization module is expected to consume only a small portion of the overall compute budget. Most existing learning-based methods are still too heavy for this purpose. In contrast, binary neural networks (BNNs) offer an appealing solution, but the 1-bit compression causes severe information loss and performance drop. In this paper, we address this challenge by proposing Binarized LiDAR-based Localization (BiLoc), the first binary neural network framework for 6-DoF LiDAR localization. Specifically, we reinterpret the training of BNNs from the perspective of the information-bottleneck principle, aiming at retaining minimal yet sufficient representations for pose estimation while suppressing redundant variations. And we introduce an auxiliary objective that adaptively regulates information retention in the binary encoder, effectively mitigating the information loss caused by binarization. This auxiliary objective provides additional optimization signals that compensate for the limited representational capacity and the gradient mismatch inherent in BNNs. Extensive experiments on large-scale outdoor LiDAR datasets demonstrate that BiLoc establishes a new state of the art for LiDAR localization with BNNs.