Anomaly Detection
Momentum
40 papers in the last four weeks, up 33% on the four weeks before. 0.4% of all new papers.
Latest papers 409
Social engineering attacks exploit human trust rather than software vulnerabilities, making them difficult to detect using conventional filters. We propose a two-stage filter-then-verify framework combining inductive Graph Neural Networks (GNNs) for structural anomaly detection with a co-attention ModernBERT model for content verification. The GNN identifies anomalous sender-receiver patterns, while BERT analyzes message context to reduce false positives. Using the Enron dataset augmented with realistic synthetic campaigns, we show that the framework achieves 86% recall in structural filtering and over 92% precision after BERT refinement, effectively detecting both external attacks and insider threats. Our results demonstrate that combining structural and content analysis allows practical, scalable detection of multi-stage social engineering attacks in email networks.
Privacy-Preserving Generation Fraud Detection for Distributed Photovoltaic Systems: A Solar Irradiance-Fused Federated Learning Framework
The wide adoption of residential photovoltaic (PV) systems introduces new challenges for generation fraud detection (FD). Unlike traditional electricity theft detection, which focuses on electricity consumption-side behavior, PV generation fraud detection (PVG-FD) is complicated by the inherent intermittency and uncertainty of PV generation. The distributed nature of PV systems poses further challenges for centralized PVG-FD approaches due to scalability and privacy concerns. This paper develops a privacy-preserving distributed PVG-FD framework based on federated learning (FL). In this framework, a utility company manages multiple household communities, where each of which is equipped with a local detector. The framework integrates a novel detection model architecture with privacy-preserving global collaboration. Each community's local model fuses PV generation and weather data via a co-attention mechanism to detect discrepancies critical for PVG-FD. The FL framework enables cross-community collaboration by aggregating model parameters and prototypes, leveraging global knowledge sharing with local refinement while preserving privacy. It also uses prototype alignment to address class imbalance by enhancing fraud sample representation. Extensive experiments on a real-world residential PV dataset validate the effectiveness of the developed method and demonstrate that it outperforms state-of-the-art FL methods across various scenarios. The results also show its scalability across varying community sizes and strong robustness to class imbalance.
ResCLIP: Few-Shot Generalist Anomaly Detection with Residual-to-Residual Alignment
Few-shot Generalist Anomaly Detection requires models to generalize to novel categories without retraining, posing significant challenges in real-world scenarios with scarce samples and rapidly changing categories. Existing CLIP-based methods face two major challenges: coarse-grained unified text prompts struggle to adapt to fine-grained foreground-background differences, causing cross-granularity mismatch; and fine-tuning on auxiliary datasets disrupts CLIP's inherent open-world generalization due to domain shift, leading to cross-category generalization degradation. To address these, we propose to shift multimodal alignment entirely into a unified residual space, where residual representations naturally eliminate fine-grained normal feature differences across regions and class-specific biases, simultaneously resolving both problems. Based on this insight, ResCLIP, the first residual-to-residual alignment framework that symmetrically bridges visual and text modalities within CLIP's residual space, is designed. The framework is developed from a residual perspective into three branches: a text prompt-based branch, a visual prompt-based branch, and a novel residual-to-residual alignment branch. All learnable optimizations are constrained within the residual domain, and the residual alignment optimization objectives are designed to force the model to focus on relative anomaly deviations rather than optimizing class-specific features. Experiments on multiple datasets demonstrate the effectiveness of our architecture. The code is available at https://github.com/hito2448/Res2CLIP.
Ti-iLSTM: A TinyDL Approach for Logic-Level Anomaly Detection in Industrial Water Treatment Systems
Industrial Water Treatment Systems (IWTS) are safety critical cyber-physical infrastructures and due to increased connectivity, these systems are exposed to cyber threats that can manipulate process behaviour without creating obvious devices outliers. In particular, logic-layer deception anomalies can preserve numerically plausible measurements while breaking expected cause-and-effect relationships in the control process. These attacks are difficult to detect using threshold-based monitoring or require heavy server-oriented anomaly detection models. This paper explores the potential of Tiny Deep Learning (TinyDL) to provide lightweight on-device logic-level anomaly detection for resource constrained Programmable Logic Controllers (PLCs). We propose a novel framework, TinyDL-based incremental LSTM (Ti-iLSTM) which optimises the memory and space foot print of Long Short-Term Memory (LSTM), to detect logic-layer inconsistencies in Programmable Logic Controller (PLC) based Industrial Water Treatment Systems (IWTS). Experiments on the publicly available SWaT dataset show that the optimised model achieves high detection performance (F1-score=0.983 and ROC-AUC=0.998). A deployment-style validation on the WADI dataset confirms that the proposed light-weight framework remains applicable beyond a single dataset. The research demonstrates that combining logic-aware supervision with Tiny Deep Learning (TinyDL) sequence learning creates an efficient and accurate anomaly detection suitable for resource constrained Programmable Logic Controllers (PLCs) in industrial environments.
From Data to Action: Accelerating Refinery Optimization with AI
Nowadays refinery optimization utilizes sheer amounts of data, which can be handled with modern Linear Programming (LP) software, but the interpreting and applying the results remains challenging. Large petrochemical companies use massive models, with hundreds of thousands of input matrix elements. The LP solution is mathematically correct, but simplifications are made in the model, and data supply errors may occur. Therefore, further insight is needed to trust the results. The LP solver does not have a memory, so additional understanding could be gained by analyzing historical data and comparing it to the current plan. As such, machine learning approaches were suggested to support decision making based on the LP solution. Among these, Anomaly Detection tools are proposed to be used in tandem with the LP output. A transformed version of the popular ECOD methodology is applied. New methods are proposed to handle high-dimensional data: choosing the most informative pairs. Then, this is used alongside two 2D Anomaly Detection algorithms, revealing several business opportunities and data supply errors in the MOL refinery scheduling and planning architecture.
Logical Grammar Induction via Graph Kolmogorov Complexity: A Neuro-Symbolic Framework for Self-Healing Clinical Data Integrity
The reliability of Healthcare Information Systems (HIS) is frequently compromised by human-induced data entry errors, which existing statistical anomaly detection methods fail to distinguish from legitimate clinical extremes. This paper proposes Logic-GNN, a novel neuro-symbolic framework that treats clinical records as a structured
private language'' governed by latent logical games. By integrating Temporal Graph Neural Networks (TGNN) with Graph Kolmogorov Complexity, we induce a symbolic grammar that represents the underlying logic of medical interactions. We define anomalies as grammatical violations'' that cause a significant expansion in the Minimum Description Length (MDL) of the clinical graph. Evaluated on the Sina System dataset (2M+ records), Logic-GNN achieves an F1-score of 0.94, outperforming state-of-the-art baselines by 12% in distinguishing between life-threatening medical outliers and data corruption. Our approach introduces a self-healing mechanism that suggests logical corrections to maintain data integrity in real-time HIS environments.Product-Aware Deep Autoencoders for Robust Process Monitoring in Multi-Product Cyber-Physical Systems
As Industry 4.0 accelerates the integration of Cyber-Physical Systems (CPS) in manufacturing, robust anomaly detection has become critical for ensuring process safety and security. Current data-driven approaches typically employ "product-agnostic" or global models trained on the aggregate of all normal operating data. However, modern industrial facilities frequently operate under diverse product grades. While computationally simple, these global models inherently expand their decision boundaries to accommodate the variance of multiple modes, creating a "blind spot" where subtle anomalies or targeted cyber-physical attacks may be masked by the wide acceptance region of the model. In this work, we first demonstrate that the vulnerability described above is present in global-agnostic models operating across multiple product grades. We then present a Product-Aware Autoencoder as a principled mitigation that restricts the learning domain to grade-specific distributions. While this approach reduces the identified blind-spot risk, we do not claim it as the optimal mitigation among all possible alternatives. We rigorously validate this approach against a Global Agnostic baseline using the Extended Tennessee Eastman Process (TEP) benchmark. Our empirical results indicate that the Product-Aware framework performs comparably to the global baseline on standard detection metrics, while offering improved robustness to product-grade-specific operating modes. Most critically, stress tests simulating our hypothetical attack scenarios reveal that while the global model fails to detect operational deviations in 77.8% of the scenarios, the product-aware system achieves 100% detection accuracy. These findings suggest that, in flexible manufacturing environments, generalized anomaly detectors can pose non-trivial security risks, motivating a shift toward mode-aware diagnostic architectures.
Uncertainty-Driven Anomaly Detection for Psychotic Relapse Using Smartwatches: Forecasting and Multi-Task Learning Fusion
Digital phenotyping enables continuous passive monitoring of behavior and physiology, offering a promising paradigm for early detection of psychotic relapse. In this work, we develop and systematically study two smartwatch-based frameworks for daily relapse detection. The first forecasts cardiac dynamics and flags deviations between predicted and observed features as indicators of abnormality. The second adopts a multi-task formulation that fuses sleep with motion and cardiac-derived signals, learning time-aware embeddings and predicting measurement timing. Both pipelines use Transformer encoders and output a daily anomaly score, derived from predictive uncertainty estimated via an ensemble of multilayer perceptrons to improve robustness to real-world wearable variability. While each framework independently demonstrates strong predictive power, we show that they capture complementary physiological signatures. Consequently, we propose a late-fusion strategy that synergistically combines the anomaly signals from both architectures into a unified decision score. We benchmark our methodology on the 2nd e-Prevention Grand Challenge dataset, where our fused model achieves a 8% relative improvement over the competition-winning baseline. Our results, supported by extensive ablation studies, suggest that the integration of diverse digital phenotypes, cardiac, motion, and sleep, is essential for the high-fidelity detection of psychotic relapse in real-world settings.
Weakly-Supervised Spatiotemporal Anomaly Detection
In this paper, we explore a weakly supervised method for anomaly detection. Since annotating videos is time-consuming, we only look at weak video-level labels during training. This means that given a video, we know that it is either normal or contains an anomaly, but no further annotations are used to train the network. Features are extracted from video clips that are either normal or anomalous. These features are used to determine anomaly scores for spatiotemporal regions of the clips based on a classifier and the implementation of a multiple instance ranking loss (MIL). We represent both anomalous and normal video clips as positive and negative bags, respectively, to apply MIL. Furthermore, since anomalies are usually localized to a part of a frame rather than the whole frame, we chose to explore temporal as well as spatial anomaly detection. We show our results on the UCF Crime2Local Dataset, which contains spatiotemporal annotations for a portion of the UCF Crime Dataset.
Conformal Anomaly Detection in Python: Moving Beyond Heuristic Thresholds with 'nonconform'
Most anomaly detection systems output scores rather than calibrated decisions, leaving practitioners to choose thresholds heuristically and without clear statistical interpretation. Conformal anomaly detection addresses this limitation by converting anomaly scores into calibrated p-values that are valid under the statistical assumption of data exchangeability, with a growing literature extending this idea beyond that setting. We present 'nonconform', a Python package for applying conformal anomaly detection within existing machine-learning workflows, and use it as the basis for an implementation-grounded introduction to the field. The package integrates with 'scikit-learn', 'pyod', and custom anomaly detectors, and provides a unified interface for calibration, p-value generation, and false discovery rate control. It supports several conformalization strategies, ranging from simple split-conformal calibration to more data-efficient and shift-aware extensions. Through a progression from foundational concepts to advanced conformalization strategies, complemented by code examples, the paper connects the statistical ideas behind conformal anomaly detection to their practical use in 'nonconform'. Empirical results demonstrate that the implemented methods enable statistically principled anomaly detection. Together, the package and exposition aim to make core conformal anomaly detection workflows more accessible and reproducible in experimental and production-oriented settings.
Learning Feature Encoder with Synthetic Anomalies for Weakly Supervised Graph Anomaly Detection
Weakly supervised graph anomaly detection aims to unveil unusual graph instances, e.g., nodes, whose behaviors significantly differ from normal ones, given only a limited number of annotated anomalies and abundant unlabeled samples. A major challenge is to learn a meaningful latent feature representation that reduces intra-class variance among normal data while remaining highly sensitive to anomalies. Although recent works have applied self-supervised feature learning for graph anomaly detection, their strategies are not specifically tailored to its unique requirements, motivating our exploration of a more domain-specific approach. In this paper, we introduce a weakly supervised graph anomaly detection method that leverages a feature learning strategy tailored for graph anomalies. Our approach is built upon a multi-task learning scheme that extracts robust feature representations through synthesized anomalies. We generate synthetic anomalies by perturbing the normal graph in various ways and assign a dedicated detection head to each anomaly type, ensuring that learned features are sensitive to potential deviations from normal patterns. Although synthetic anomalies may not perfectly replicate real-world patterns, they provide valuable auxiliary data for effective feature learnin, much like features learned from ImageNet classification transfer to downstream vision tasks. Additionally, we adopt a two-phase learning strategy: an initial warm-up phase using only synthetic samples, followed by a full-training phase integrating both tasks, to balance the influence of synthetic and real data. Extensive experiments on public datasets demonstrate the superior performance of our method over its competitors. Code is available at https://github.com/yj-zhou/SAWGAD.
Conditional anomaly detection methods for patient-management alert systems
Anomaly detection methods can be very useful in identifying unusual or interesting patterns in data. A recently proposed conditional anomaly detection framework extends anomaly detection to the problem of identifying anomalous patterns on a subset of attributes in the data. The anomaly always depends (is conditioned) on the value of remaining attributes. The work presented in this paper focuses on instance-based methods for detecting conditional anomalies. The methods rely on the distance metric to identify examples in the dataset that are most critical for detecting the anomaly. We investigate various metrics and metric learning methods to optimize the performance of the instance-based anomaly detection methods. We show the benefits of the instance-based methods on two real-world detection problems: detection of unusual admission decisions for patients with the community-acquired pneumonia and detection of unusual orders of an HPF4 test that is used to confirm Heparin induced thrombocytopenia - a life-threatening condition caused by the Heparin therapy.
Hypergraph-Enhanced Training-Free and Language-Free Few-Shot Anomaly Detection
Few-shot anomaly detection (FSAD) has made significant strides, yet existing methods still face critical challenges: (i) dependence on task- or dataset-specific training/fine-tuning, (ii) reliance on language supervision or carefully hand-crafted prompts, and (iii) limited robustness across domains. In this paper, we introduce HyperFSAD, a novel FSAD framework that is training-free, language-free, and robust across domains, offering a powerful solution to these challenges. Built upon DINOv3 and a hypergraph-based inference mechanism, our approach performs inference without any task-specific optimization or text prompts, while remaining competitive. Specifically, we replace sensitive nearest-neighbor / top- matching with \textbf{Sparse Hyper Matching}: \textit{sparsemax} first selects the most relevant support patches, which are then aggregated into a \textit{hyperedge} as compact normal evidence to suppress background noise and distractors. We further introduce \textbf{Dual-Branch Image Scoring}, which fuses \emph{spatial anomaly evidence} from the patch-grid anomaly map with \emph{global semantic deviation} captured by support-aware CLS matching, yielding a robust image-level anomaly score in a strictly visual manner. Notably, all components of HyperFSAD are purely visual, eliminating the need for labor-intensive hand-crafted text prompts. Under the stringent training-free and language-free setting, HyperFSAD achieves state-of-the-art performance across six datasets spanning four industrial datasets (MVTecAD, VisA, MPDD, BTAD) and two medical datasets (RESC, BraTS).
AnomalyClaw: A Universal Visual Anomaly Detection Agent via Tool-Grounded Refutation
Visual anomaly detection (VAD) is crucial in many real-world fields, such as industrial inspection, medical imaging, infrastructure monitoring, and remote sensing. However, the specific anomaly definitions, data modalities, and annotation standards across different domains make it difficult to transfer single-domain trained VAD models. Vision-language models (VLMs), pre-trained on large-scale cross-domain data, can perform visual perception under task instructions, offering a promising solution for cross-domain VAD. However, single-inference VLM judgments are unreliable, since they rely more on prior knowledge than on normal-sample references or fine-grained feature evidence. We therefore present AnomalyClaw, a training-free VAD agent that turns anomaly judgment into a multi-round refutation process. In each round, the agent proposes candidate anomalies and refutes each against normal-sample references, drawing on a 13-tool library for visual verification, reference parsing, and frozen expert probing. On the CrossDomainVAD-12 benchmark (12 datasets), AnomalyClaw achieves consistent macro-AUROC improvements over single-step direct inference with +6.23 pp on GPT-5.5, +7.93 pp on Seed2.0-lite, and +3.52 pp on Qwen3.5-VL-27B. We further introduce an optional verbalized self-evolution extension. It builds an online rulebook from internal-branch disagreement without oracle labels. On Qwen3.5-VL-27B, it delivers a +2.09 pp mean gain, comparable to a K = 10 oracle-label supervised baseline (+1.99 pp). These results show that agentic refutation improve anomaly understanding and reasoning of VLMs, rather than merely aggregating tool outputs.
When Normality Shifts: Risk-Aware Test-Time Adaptation for Unsupervised Tabular Anomaly Detection
Unsupervised tabular anomaly detection methods typically learn feature patterns from normal samples during training and subsequently identify samples that deviate from these patterns as anomalies during testing. However, in practical scenarios, the limited scale and diversity of training data often lead to an incomplete characterization of normal patterns. While test-time adaptation offers a remedy, its isolated focus on test-time optimization ignores the critical synergy with training-phase learning. Furthermore, indiscriminate adaptation to unlabeled test data inevitably triggers anomaly contamination, preventing the model from fully realizing its discriminative capability between normal and anomalous samples. To address these issues, we propose RTTAD, a Risk-aware Test-time adaptation method for unsupervised Tabular Anomaly Detection. RTTAD holistically tackles normality shifts via a synergistic two-stage mechanism. During training, collaborative dual-task learning captures multi-level representations to establish a robust normal prior. During testing, a Test-Time Contrastive Learning (TTCL) module explicitly accounts for adaptation risk by selectively updating the model using high-confidence pseudo-normal samples while constraining anomalous ones. Additionally, TTCL incorporates a k-nearest neighbor-based contrastive objective to refine embedding distributions, thereby further enhancing the model's discriminative capacity. Extensive experiments on 15 tabular datasets demonstrate that RTTAD achieves state-of-the-art overall detection performance.
Multi-Tier Labeling and Physics-Informed Learning for Orbital Anomaly Detection at Scale
Detecting orbital anomalies, such as maneuvers, atmospheric decay, and attitude upsets, across the rapidly growing population of low-Earth-orbit (LEO) satellites is a prerequisite for collision avoidance, decay forecasting, and conjunction screening. The bottleneck is not modeling capacity but labels: there is no public ground-truth corpus of orbital anomalies, manual review does not scale to approximately 10^4 active satellites, and pure rule-based detectors trade recall for precision so aggressively that they are blind to most behavioral anomalies. We present a multi-tier labeling cascade that composes three weak supervision sources of increasing fidelity: a fast physics rule set (rule_v1), an Interacting Multiple Model Unscented Kalman Filter (IMM-UKF) bank, and a supplemental-element calibration step (supGP), to produce labels at a scale unavailable from any single source. Applied to 232M Two-Line Element (TLE) records spanning 60 years, the cascade yields 8.6M labeled sequences of length 50 (430M timesteps) over 11 features that include explicit time encoding and full mean-element state. On overlapping satellites, IMM-UKF surfaces 42.6x more anomalies than rule_v1 alone. We train a 6.5M-parameter Transformer in two stages, achieving a maneuver recall of 55.4% and decay recall of 62.8% on a held-out test set. An ablation on the time-delta feature alone yields a 107% relative improvement in decay recall. We frame the resulting model as a high-recall triage classifier whose role is to surface candidate events for downstream filtering, not to issue final attributions, and discuss the path toward a Neural-ODE-based orbital world model.
FragBench: Cross-Session Attacks Hidden in Benign-Looking Fragments
An attacker can split a malicious goal into sub-prompts that each look benign on their own and only become harmful in combination. Existing LLM safety benchmarks evaluate prompts one at a time, or across turns of a single chat, and so do not look for a malicious signal spread across separate sessions with no shared context. We build FragBench, a benchmark drawn from 24 real-world cyber-incident campaigns, which keeps the full attack trail: the multi-fragment kill chain, the per-fragment safety-judge verdicts, sandboxed execution traces, and a matched set of benign cover sessions. FragBench splits this trail into two paired tasks: an adversarial rewriter that hardens fragments against a single-turn safety judge (FragBench Attack), and a graph-based user-level detector trained on the resulting interactions (FragBench Defense). The single-turn judge is near chance on the released corpus by construction, but four GNN variants and three classical-ML baselines all recover the cross-session feature, reaching aggregate event-level F1 = 0.88-0.96. Defending against fragmented LLM misuse therefore requires modeling the cross-session interaction graph, rather than isolated prompts. Our generator, rewriter, sandbox harness, and detector are released at https://github.com/LidaSafety/fragbench.
FedCIGAR: A Personalized Reconstruction Approach for Federated Graph-level Anomaly Detection
Graph-level anomaly detection (GLAD) is crucial for ensuring the reliability of graph-driven applications by identifying abnormal graphs that deviate from the majority. Considering the privacy concerns in distributed scenarios, federated graph-level anomaly detection (FedGLAD) has emerged as a promising solution to enable collaborative detection without sharing raw data. However, existing methods suffer from poor generalization due to the reliance on unrealistic synthetic anomalies and insufficient personalization capabilities under data heterogeneity. To address these challenges, we propose a novel Federated graph-level anomaly detection approach with Cluster-adaptIve GAted Reconstruction (FedCIGAR). Specifically, we design a reconstruction-based paradigm trained on normal graphs to avoid synthetic data. Furthermore, we introduce a client-side node contribution gating mechanism and a server-side sliding window-based clustering strategy to tackle data heterogeneity. Extensive experiments demonstrate that FedCIGAR achieves superior performance and robustness in contrast to state-of-the-art methods.
Detect, Localize, and Explain: Interactive Hierarchical Log Anomaly Analytics with LLM Augmentation
Logs are ubiquitous in modern systems. Unfortunately, their unstructured nature in flat sequences limits understanding of execution behaviors, hindering effective anomaly diagnosis. To address this, Krone introduces a novel hierarchical log abstraction that transforms flat log sequences into semantically coherent units across entity, action, and status levels. Building on this abstraction, Krone introduces a hierarchical orchestration framework that decomposes flat log sequences into hierarchical execution units and performs modular detection over them. It executes and optimizes the modular detection tasks across levels, enabling precise anomaly detection, localization, and explanation with selective invocation of LLM-based reasoning. In this work, we present Krone-viz, an interactive visualization system based on Krone, which makes hierarchical log analysis interpretable and actionable for software engineers and system operators. Demonstrated on the widely used HDFS benchmark dataset, Krone-viz supports: 1) examining hierarchical decompositions of flat log sequences, 2) inspecting detection results and abnormal segments identified by Krone with LLM-generated explanations, and 3) reusing, reviewing, and revising knowledge generated by LLMs with human-in-the-loop guardrails. The code of Krone-viz is available at https://github.com/LeiMa0324/KRONE_Demo_official, and we deploy a live demo at https://leima0324.github.io/KRONE_Demo_official.
The Payment Heterogeneity Index: An Integrated Unsupervised Framework for High-Volume Procurement Oversight and Decision Support
Public procurement is vulnerable to error, fraud, and corruption, particularly as high transaction volumes overwhelm oversight. While research often focuses on tender-stage anomalies, post-award payment monitoring remains underexplored. Since labelled datasets are rare and methods like Benford's Law face restrictive assumptions, there is a need for interpretable, unsupervised frameworks for high-volume procurement oversight and decision support. This paper introduces the Structural Heterogeneity Index (SHI), a composite statistic for one-dimensional samples, and its payment-specific instantiation, the Payment Heterogeneity Index (PHI), characterising payment structure and latent regimes. It incorporates Gaussian Mixture Model (GMM) parameters alongside non-parametric statistics, integrating four interpretable components: modality, asymmetry, tail behaviour, and structural dispersion. Uniquely, the tail-behaviour component captures both distributional heaviness and extreme-value concentration, while structural-dispersion combines the variability, prevalence, and separation of latent payment regimes. Applied to UK municipal procurement data, PHI identifies a financially significant cohort (0.6% of suppliers; 10.1% of high-volume vendors) with structurally distinct payment patterns. Statistical testing further supports these differences, and targeted human verification confirms the plausibility of prioritised cases. Comparative analysis shows PHI reveals regime separation obscured by the Coefficient of Variation (). PHI provides a transparent, decomposable, and computationally lightweight framework for procurement integrity oversight and targeted audit prioritisation.
ORACLE: Anticipating Scams from Partial Trajectories in Streaming App Usage
Smartphone scams are increasingly prevalent and typically manifest as multi-stage, cross-application processes with gradually emerging intent. Effective intervention thus requires anticipating scams before the intent becomes explicit. This is inherently challenging, as decisions must rely on partial trajectories with temporally distributed evidence. In this paper, we propose \textbf{ORACLE} Online Reasoning for Anticipating Cross-temporal Latent thrEats, the first agentic framework for early scam anticipation from \textit{streaming app-usage} trajectories. To support this setting, we curate a real-world long-horizon benchmark of streaming app-usage trajectories, covering 12 scam types, spanning extended periods (15 days on average), involving diverse applications (95 apps), and interleaving normal and scam behaviors. To address fragmented evidence, we introduce a self-evolving context manager that adaptively consolidates entity-centric interactions over time, enabling more effective reconstruction of cross-temporal evidence from partial observations. To enhance sensitivity to latent early-stage signals, we propose an on-policy self-distillation scheme in which a teacher model, conditioned on summarized anti-scam reflections and clues by skills, supervises a student model without access to such reflections. This scheme thereby distills evidence-informed knowledge and improves recognition of emerging fraud patterns from partial trajectories. Experiments show that \method{} consistently improves early scam anticipation, yielding timely warnings while reducing false alerts in realistic streaming scenarios.
Outlier detection for patient monitoring and alerting
We develop and evaluate a data-driven approach for detecting unusual (anomalous) patient-management decisions using past patient cases stored in electronic health records (EHRs). Our hypothesis is that a patient-management decision that is unusual with respect to past patient care may be due to an error and that it is worthwhile to generate an alert if such a decision is encountered. We evaluate this hypothesis using data obtained from EHRs of 4486 post-cardiac surgical patients and a subset of 222 alerts generated from the data. We base the evaluation on the opinions of a panel of experts. The results of the study support our hypothesis that the outlier-based alerting can lead to promising true alert rates. We observed true alert rates that ranged from 25% to 66% for a variety of patient-management actions, with 66% corresponding to the strongest outliers.
Seeing the Needle in the Haystack: Towards Weakly-Supervised Log Instance Anomaly Localization via Counterfactual Perturbation
Log anomaly detection is a critical task for system operations and security assurance. However, in networked systems at scale, log data are generated at massive scale while instance-level annotations are prohibitively expensive, posing great difficulties to fine-grained anomaly localization. To address this challenge, we propose LogMILP (Log anomaly localization based on Multi-Instance Learning enhanced by prototypes and Perturbation), a weakly supervised framework that enables both bag-level anomaly detection and instance-level anomaly localization using only bag-level labels. Our method guides the model to pinpoint the critical log entries using prototype-guided structural modeling with counterfactual perturbation consistency regularization, thereby improving localization reliability and interpretability under coarse-grained supervision. Experimental results on three public datasets demonstrate that LogMILP achieves competitive detection performance while yielding significantly more reliable instance-level localization. Our code is open-sourced at https://github.com/YUK1207/LogMILP.
Contour-Native Bridge Defect Detection and Compact Digital Archiving with Frequency-Supervised Fourier Contours
AI-assisted bridge defect inspection often produces bounding boxes with crude geometry or raster masks that are costly to store, transmit, and reuse. This study investigates how detected defects can be represented as compact, recoverable contour-level vector records in image space. We propose Frequency-Supervised Fourier Series Detection (FS-FSD), which directly regresses Fourier contour descriptors and evaluates boxes, masks, and contours under a unified polygon-space protocol. On 3,767 UAV-collected bridge images with 42,346 defect instances, FS-FSD achieves higher polygon-space accuracy and better matched-TP geometric quality than representative detection, segmentation, and contour baselines. These results show that, compared with bounding boxes and raster masks, Fourier contour records preserve defect-boundary geometry in a more compact, recoverable, and shareable form for engineering review and downstream information workflows. Future work will study the modeling of multi-region, fragmented, and adjacent bridge-defect boundaries and extend the framework toward long-term bridge-defect tracking and lifecycle-oriented management.
Simultaneous Monitoring of Shape and Surface Color via 4D Point Clouds: A Registration-free Approach
Advanced manufacturing technologies allow for the production of intricate parts featuring high shape complexity and spatially-varying material composition. Data fusion of point clouds with chromatic attributes provides 4D point clouds, a compact and informative representation that encodes both shape and material information. In this paper, we present a registration-free framework for Simultaneous Monitoring of shApe and Color (SMAC) via 4D point clouds. The proposed framework leverages Laplace-Beltrami operator spectral properties to capture and monitor geometric features and the relationship between shape and surface color. A combined monitoring scheme is proposed to effectively detect shape deformations and color anomalies, along with a spatially-aware post-signal diagnostic procedure to determine the source of change and localize color anomalies. Importantly, neither component relies on registration or mesh reconstruction, eliminating error-prone and computationally expensive preprocessing steps. A Monte Carlo simulation study and a case study on functionally graded materials demonstrate that SMAC achieves effective detection performance, particularly for subtle defects, while providing diagnostic capabilities to identify the source and location of anomalies.
GRASP -- Graph-Based Anomaly Detection Through Self-Supervised Classification
Advanced persistent threat (APT) attacks remain difficult to detect due to their stealth, adaptability, and use of legitimate system components. Provenance-based intrusion detection systems (PIDS) offer a promising defense by capturing detailed relationships between system components and actions. However, current PIDS rely on predefined or subset-determined thresholds, which limit detection stability and the ability to detect any anomalous behavior in general. Furthermore, related work often neglects the role of process executables, which describe system activity by interacting through a process with files, network components, and other processes. We introduce GRASP, a PIDS based on masked self-supervised classification. GRASP masks the executable information of processes and learns to infer it from their two-hop provenance graph neighborhood, marking misclassified processes as anomalies. It captures behavior patterns for the learned executables without thresholding, making it robust against interference and unknown activities. Evaluations on the DARPA TC and OpTC datasets demonstrate that GRASP consistently detects anomalous behavior, including known attack-related activities, outperforming existing systems. Our PIDS identifies all documented attacks on datasets where the behavior of executables is learnable. In addition, compared to existing systems, GRASP uncovers potentially malicious anomalous behavior not labeled as an attack in the documentation.
A Task-Agnostic Algebraic Integrity Metric for Event-Camera Streams Toward SOTIF-Compliant Perception using Pearson Correlation Coefficient
Event cameras have emerged as a high-bandwidth, low-latency sensing modality for safety-critical perception in automated driving systems (ADS), offering microsecond temporal resolution, 120-140 dB dynamic range, and intrinsic absence of motion blur. However, no task-agnostic quality metric currently operates directly on the asynchronous event stream: state-of-the-art proxies require a downstream task (e.g., detection accuracy, tracking error) to assess stream integrity, which is incompatible with the certification requirements of ISO 21448 (SOTIF) and ISO/PAS 8800:2024. The recent BiasBench benchmark (CVPR 2025) explicitly identifies this gap. This work proposes a unified algebraic framework that lifts the Pearson Correlation Coefficient (PCC), historically used in two prior works for redundancy filtering and ROI selection on frame-based images, to the three standard event representations: Time Surface, Event Frame, and Voxel Grid. The framework yields three metrics: (i) r-TS for stream integrity monitoring against an ego-motion-predicted Time Surface, (ii) r2-EF for adaptive ROI selection requiring only integer comparisons, and (iii) r-VG for temporal redundancy gating. A structural isomorphism is established between the contrast-threshold mechanism of the event camera (|Delta L| >= C) and the PCC-based change criterion, the three lifted metrics are formalized, and pipeline latency and information loss are analyzed symmetrically against the raw stream. Illustrative behavior of each metric is demonstrated on a procedural-synthetic event stream, generated by direct simulation of the emission model rather than drawn from any real or video-derived dataset, including a tunnel-dip integrity-anomaly scenario in which r_C drops from 0.93 (coherent flow) to below 0 (alarm). An explicit epistemic convention ([ESTABLISHED], [SOLID], [HYPOTH.], [OPEN]) delineates the status of every contribution.
GESR: Graph-Based Edge Semantic Reconstruction for Stealthy Communication Detection with Benign-Only Training
Detecting stealthy malicious communications from flow logs under benign-only training remains a critical challenge in network security. Malicious communications often camouflage as normal traffic like standard HTTPS flows. Conventional intrusion detectors rely strictly on known labeled attacks. Alternatively, they score flows completely independently. These approaches fail against sparse and context-dependent suspicious activity. To capture this essential context, graph anomaly detectors have been introduced to add valuable relational information to the analysis. However, existing methods fail to test the structural consistency of specific communication edges. To overcome these fundamental limitations, we present GESR, a novel graph-based framework for detecting suspicious communications and anomalous hosts under a benign-only training setting. GESR models complex network activity as attributed communication graphs. It cleverly reconstructs edge semantics entirely from local structural context rather than isolated features. This non-intuitive design forces the framework to predict expected communication patterns from neighborhood topologies. Attackers cannot easily manipulate this deep structural dependency. The model then converts the resulting structural inconsistencies into host-level anomaly scores. It utilizes robust Median Absolute Deviation (MAD) calibration for this final step. We evaluate GESR extensively on CTU-13 and CICIDS2017 datasets. These evaluations strictly impose tight false-positive operating constraints. On CICIDS2017, GESR achieves an outstanding ROC-AUC of 0.9753. It also yields a high TPR of 0.8569 at a strict 5% FPR threshold. GESR consistently outperforms existing methods across both evaluated benchmarks. The results prove that structure-conditioned edge reconstruction is a credible direction for practical intrusion detection.
HBEE: Human Behavioral Entropy Engine -- Pre-Registered Multi-Agent LLM Simulation of Peer-Suspicion-Based Detection Inversion
Insider threat detection assumes that an adaptive insider leaves behavioral residue distinguishing them from legitimate users. We test this assumption against an LLM-driven adaptive insider in a controlled multi-agent simulator. Our pre-registered five-condition study isolates defender mode (cascade vs. blind UEBA) crossed with adversary type (naive vs. adaptive OPSEC) plus a no-mole control, across 100 runs (95 valid after pre-committed exclusions). The primary finding is a detection inversion: at T_60, the adaptive mole's suspicion in-degree is statistically lower than a randomly selected innocent agent (Cliff's delta = -0.694, 95% BCa CI [-0.855, -0.519], Mann-Whitney p << 0.01). The pre-registered prediction was the opposite direction. A pre-registered equivalence test (H2) shows adaptive OPSEC produces no detectable shift in the mole's UEBA rank under either defender mode. The two detection signals (peer suspicion graph in-degree and per-agent UEBA rank) decouple under adaptive adversary behavior. We bound generalization explicitly: a pre-registered Gini calibration check (H4) returns FAIL, with HBEE pairwise message-exposure Gini (0.213) diverging from the SNAP Enron reference (0.730) by |Delta Gini| = 0.52, exceeding the equivalence bound by 5x. The paper makes a narrow but surprising claim: in a controlled environment where adaptive OPSEC is implementable as an LLM directive, peer-suspicion-cascade detection inverts. We release the simulator, pre-registration document, frozen scenarios, raw telemetry, and analysis pipeline under an open-source license.
Real-IAD MVN: A Multi-View Normal Vector Dataset and Benchmark for High-Fidelity Industrial Anomaly Detection
Industrial Anomaly Detection (IAD) is critical for quality control, but existing methods struggle with subtle, geometric defects. Standard 2D (RGB) images are sensitive to texture and lighting but often miss fine geometric anomalies. While 3D point clouds capture macro-shape, they are typically too sparse to detect micro-defects like scratches or pits. We address this fundamental data limitation by introducing Real-IAD-MVN (Multi-View Normal), a large-scale industrial dataset. By upgrading our acquisition system, Real-IAD-MVN captures high-fidelity surface normal maps from five distinct viewpoints, replacing sparse 3D data entirely. This provides a comprehensive geometric representation at a micro-detail level, making previously invisible side-wall and occluded defects explicitly detectable. Our experiments, conducted on this new dataset, first provide evidence that incorporating dense, multi-view pseudo-3D (surface normals) yields significantly better detection performance than using sparse 3D point cloud data. To further validate the dataset and provide a strong benchmark, we introduce a baseline method based on reconstruction, which learns to extract cross-modal unified prototypes from the image and normal map streams. We demonstrate that this unified prototype approach surpasses existing state-of-the-art multimodal fusion methods, highlighting the rich potential of our new dataset for advancing geometric anomaly detection.