Bioinspired Robotics

This paper presents the hardware implementation of a quadratic program-based controller on Harpy: thruster-assisted bipedal robot to perform thruster-assisted trotting. This is inspired by wing-assisted locomotion observed in birds such as the chukar partridge, which employ thrust vectoring to manipulate the ground reaction force. The proposed controller formulates the thruster-assisted spring-loaded inverted pendulum dynamics as a condensed QP-based model predictive control problem, enabling simultaneous regulation of ground contact force and active thrust vectoring at 500 Hz. A decoupled control architecture is used, where the robot's sagittal dynamics are controlled using QP-MPC while the frontal dynamics is regulated using a cascade orientation stabilization controller. Two experiments were conducted with different forward reference velocities of 0 m/s and 0.1 m/s. While the instantaneous velocity oscillates, the mean velocities can track their respective reference. Additionally, joint tracking error remains within 1 deg while tracking the desired leg length given by the leg trajectory controller and desired swing trajectory given by Raibert's heuristic. The QP-MPC problem is consistently solved with 0.18ms, which is well within the 2ms computation budget while satisfying the GRF friction cone constraint.

Octopuses exhibit a powerful form of embodied intelligence from a highly adaptable soft body. One key mechanism is the ability to instantiate bending points at any location along the arm, which enables performant and dexterous behaviours. Taking inspiration from the octopus for its dexterity, this study focuses on changing the curvature of a tendon-actuated arm by adaptively changing the anchoring end-point along the arm. An array of inflatable shells is integrated into the arm, where inflating a shell causes an increase in friction at the location, jamming the tendon and creating a temporary new anchoring point. The novel soft actuator does not break the continuity of the arm between the actuated segment and the loose segment. Experiments show that the actuated segment has a non-constant bell-shaped curvature which is comparable to that of a real octopus arm during a reaching motion. Compared to conventional single-tendon continuum manipulators, the proposed design offers an expanded workspace and enhanced dexterity through the ability to independently shape different regions of the arm through selective curvature tuning. At the same time, it avoids the mechanical complexity typically associated with multi-segment, multi-actuator systems.

In nature, animals interact with complex terrains and often generate forces, deformations, and vibrations across the body and environment. Such interaction-induced mechanical information may guide behavior, yet its generation and use are difficult to resolve because movement rapidly and continually reconfigures the interactions that produce it. Sensory neurophysiology and biomechanics have revealed how mechanical information is transformed within sensory, neural, and musculoskeletal subsystems, whereas studies in complex terrains reveal rich whole-body interactions and behavioral outcomes. Connecting these levels remains a challenge. Here, I present a focused perspective on how biologically guided robotic physical models can help identify candidate mechanical information generated through whole-body interactions, test its physical mechanisms and behavioral benefits, and generate biological hypotheses. Three case studies illustrate this approach, multi-legged locomotor transitions to traverse dense clutter, limbless vertical body bending to propel through uneven terrain, and rapid spider leg crouching to help vibration sensing of prey on a web. Across these systems, correspondence between robots and animals supports the biological plausibility of these candidate physical mechanisms and motivates better measurements and models to determine how the relevant mechanical information is sensed and used to modulate behavior.

The muscles that power insect flight fall into one of two categories: 1) synchronous muscles that contract under direct control from the nervous system, and 2) asynchronous muscles which have an intrinsic stretch activation response that spontaneously generates wingbeats without the need for signaling from the brain. It is thought that the emergent nature of asynchronous wingbeats provides both adaptive and responsive capabilities for flight control. To date, most flying robots use synchronous actuation. In this paper we develop the first flight-capable flapping wing robot that uses asynchronous actuation. We demonstrate that asynchronous actuation allows wings to respond to changes in the resonant mechanics of the body without control input, and wings can react instantaneously to collisions with obstacles with no extrinsic sensing needed. Flight tests within cluttered environments demonstrate that asynchronous actuation significantly improves stability and performance when compared to synchronous actuation. In total this work demonstrates that a flapping wing robot actuation strategy that emulates the asynchronous muscles of flying insects can provide fast, reactive actuation responses before a control system would need to intervene. This partitioning of embodied control to both the low-level actuation dynamics and and high-level sensorimotor system provides a compelling blueprint for new flying robots.

The elephant trunk is a dexterous and versatile manipulator whose performance is still unmatched in robotics. In previous works, modularity was prioritized and relatively small-scale continuum robots were built. We take the natural proboscis of the Loxodonta africana species as a model and propose a different design approach which favors structural continuity and dynamic properties that plausibly emulate those of the natural trunk, while conferring high adaptability to the environment and humans. Instead of targeting prescribed behaviors, we show that a biomimetic design based on the macroscopic properties of the natural system enables elephant-like movements and grasping. We build by 3D printing an 85 cm long, compliant, tapered, volumetrically tessellated continuum arm, which is combined with tendon-driven actuation mimicking the longitudinal and oblique muscles of the natural model. We demonstrate whole-body grasping of objects having different shapes and dimensions and discuss a comparison to the biological trunk highlighting aspects of both biology and robotics.

In microrobotics, enhancing locomotion capabilities by increasing the degrees of freedom (DoF) of leg mechanisms under severe spatial constraints remains a significant challenge. Inspired by insect locomotion, this paper presents a novel micro-scale parallel leg mechanism with four degrees of freedom, and systematically analyzes its mechanical design, electrical system, and kinematics. The design incorporates two spherical five-bar linkages to achieve spatial motion within a parallel four-bar configuration. Furthermore, a concentric design strategy is employed to simplify the analytical solution of the leg kinematics. Due to the parallel system architecture, all actuators are located on the main body, substantially reducing the equivalent inertia of moving parts compared to traditional high-DOF leg structures. The total mass of the system is only 18.9 g, with an end-effector output force of approximately 0.5 N and a workspace exceeding 22255 mm3. Experimental results demonstrate that the proposed single-leg mechanism achieves excellent motion flexibility, highlighting its potential for micro bio-inspired robotics.

Increasing interest in deep-sea operations and resources motivates the development of ecologically sensitive but environmentally durable robots. Dielectric elastomer actuator artificial muscles are good candidates for powering such systems due to their pressure and temperature tolerance and soft makeup, but they are difficult to integrate with robotic systems. This work presents an autonomous robotic platform: the CORE, capable of driving six artificial muscles while sensing visual and spatial information. To validate the platform, we developed the Cuttlebot - a cuttlefish-inspired robot that swims in three dimensions using undulatory fin locomotion. The Cuttlebot has four primary artificial muscles in its fins in addition to a tentacle-inspired soft gripper. The robot was evaluated in a series of tethered and untethered swimming tests, demonstrating a top speed of 2.5 centimeters per second translation and 10 degrees per second rotation. Furthermore, the CORE system was capable of driving specialized control signals into the artificial muscles to controllably output force and torque in six axes. This work provides a platform for developing complex, bio-inspired swimming robots for ocean exploration and monitoring, laying the foundation with our leading example: the Cuttlebot.

For most of human history, we have not thought systematically about how and why we incorporate aspects of the natural world into our designs. The lack of a systematic approach has resulted in inconsistencies in motivations and methods that make it difficult to predict or evaluate the success of bio-inspired design. This mismatch between expectations and results can lead to disappointment when a reader considers a bio-inspired design to be superficial, weak, or incomplete. This is especially true in the field of Robotics, in which similarity to a biological system might be the driving motivation for construction. In an effort to assist robotics researchers justify their specific bio-inspired approach and to assist funding program managers with discerning the value of different bio-inspired approaches, here we propose a taxonomy of motivations for bio-inspired design and describe the potential significant contributions that are likely to result from different approaches.

Cephalopod pulsed-jet locomotion is not a single isolated expulsion event, but a coordinated cycle involving jet expulsion, passive gliding, and mantle refilling. Inspired by this cycle-resolved biological strategy, this paper presents a cephalopod-inspired pulsed-jet robot with a rigid-soft hybrid origami mantle that enables large, actively driven, and geometry-guided body deformation. The proposed mantle integrates rigid folding panels with a compliant silicone framework, allowing a 75% effective cavity-volume reduction during expulsion and reducing the projected cross-sectional drag area by approximately 75.7% in the contracted gliding configuration. Using this platform, we formulate a cycle-resolved framework to separately investigate how expelled volume, glide duration, and refill pathway influence whole-cycle locomotion performance. Experiments show that the robot reaches a peak speed of approximately 0.5 m/s (3.8 BL/s) and an average speed exceeding 0.2 m/s (1.5 BL/s) within the first jetting cycle. The results further demonstrate the roles of high expelled-volume-ratio contraction in speed generation, reduced-drag-area gliding under different glide durations, and mantle-aperture-inspired passive inlet valves in assisting refill. This work provides both a robotic implementation of actively deformable cephalopod-like jet propulsion and a unified experimental platform for studying expulsion-gliding-refilling dynamics in pulsed-jet locomotion.

While Central Pattern Generators (CPGs) and Multi-Layer Perceptrons (MLP) are widely used paradigms in robot control, few systematic studies have been performed on the relative merits of large parameter spaces. In contexts where input and output spaces are small and performance is bounded, having more parameters to optimize may actively hinder the learning process instead of empowering it. To empirically measure this, we submit a given robot morphology, with limited proprioceptive capabilities, to controller optimization under two bio-inspired paradigms (CPGs and MLPs) with evolutionary- and reinforcement- trainer protocols. By varying parameter spaces across multiple reward functions, we observe that shallow MLPs and densely connected CPGs result in better performance when compared to deeper MLPs or Actor-Critic architectures. To account for the relationship between said performance and the number of parameters, we introduce a Parameter Impact metric which demonstrates that the additional parameters required by the reinforcement technique do not translate into better performance, thus favouring evolutionary strategies.

Unlike their large-scale counterparts, small-scale robots are largely confined to laboratory environments and are rarely deployed in real-world settings. As robot size decreases, robot-terrain interactions fundamentally change; however, there remains a lack of systematic understanding of what sensory information small-scale robots should acquire and how they should respond when traversing complex natural terrains. To address these challenges, we develop a Small-scale, Intelligent, Lizard-inspired, Adaptive Robot (SILA Bot) capable of adapting to diverse substrates. We use granular media of varying depths as a controlled yet representative terrain paradigm. We show that the optimal body movement pattern (ranging from standing-wave bending that assists limb retraction on flat ground to traveling-wave undulation that generates thrust in deep granular media) can be parameterized and approximated as a linear function of granular depth. Furthermore, proprioceptive signals, such as joint torque, provide sufficient information to estimate granular depth via a K-Nearest Neighbors classifier, achieving 95% accuracy. Leveraging these relationships, we design a simple linear feedback controller that modulates body phase and substantially improves locomotion performance on terrains with unknown depth. Together, these results establish a principled framework for perception and control in small-scale locomotion and enable effective terrain-adaptive locomotion while maintaining low computational complexity.

Quadruped robots are becoming increasingly essential for various applications, including industrial inspection and catastrophe search and rescue. These scenarios require robots to possess enhanced agility and obstacle-navigation skills. Nonetheless, the performance of current platforms is often constrained by insufficient peak motor power, limiting their ability to perform explosive jumps. To address this challenge, this paper proposes a bio-inspired method that emulates the energy-storage mechanism found in froghopper legs. We designed a Deployable Compliant Leg (DCL) utilizing a specialized 3D-printed elastic material, Polyether block amide (PEBA), featuring a lightweight internal lattice structure. This structure functions analogously to biological tendons, storing elastic energy during the robot's squatting phase and rapidly releasing it to augment motor output during the leap. The proposed mechanical design significantly enhances the robot's vertical jumping capability. Through finite element analysis (FEA) and experimental validation, we demonstrate a relative performance improvement of 17.1% in vertical jumping height.