Contact-Rich Robotic Manipulation

Dexterous manipulation requires both large-scale task progression and precise contact-rich interaction, making it challenging to collect demonstrations that effectively support both regimes. We present SkillWeave, a heterogeneous demonstration framework for long-horizon dexterous manipulation that combines teleoperation for coarse reaching and transport with kinesthetic teaching for precise, contact-rich skills. To address the visual mismatch introduced by the demonstrator's presence during kinesthetic data collection, we propose an object-mask-conditioned diffusion policy that uses offline object segmentation for training supervision and a lightweight learned mask predictor at deployment, avoiding online segmentation and image inpainting. To mitigate distribution shift between independently trained sub-task policies, we introduce successor-aware terminal steering, which selects among actions sampled from the predecessor policy to guide the system toward states supported by the successor's demonstrated initial-state distribution. Across three real-world long-horizon tasks, SkillWeave achieves 27% average end-to-end success. Mask-conditioned kinesthetic policies improve dexterous sub-task success to an average of 65%, while successor-aware handoffs achieve an average composition efficiency of 87%. These results show that matching demonstration modality to interaction regime, explicitly addressing kinesthetic visual mismatch, and steering policy handoffs toward successor-supported states substantially improves long-horizon dexterous manipulation. Videos and code are available at skillweave-authors.github.io .

Collecting tactile demonstrations on robots is costly and slow, motivating the use of lower-cost human tactile gloves for scalable data collection. However, human capacitive/piezoresistive gloves and robotic tactile sensors differ fundamentally in transduction principle, sensor layout, spatial resolution, and dynamic response, making alignment of raw sensor channels ill-posed. To address this problem, we present TACROSS, a scalable system for learning from human touch and transferring it to robots that bridges this heterogeneity by aligning tactile streams at the level of contact events rather than raw sensor values. The hardware component of TACROSS integrates a piezoresistive glove with five layers and a cost of USD 10.86 with 285 sensing points. To align contact semantics, we design canonicalizers and residual adapters that map heterogeneous signals into a shared tactile latent with 256 dimensions via a temporal Transformer with attention across fingers. We further introduce a robot-grounded policy learning scheme in which robot demonstrations provide the sole source of ground-truth action supervision, while human demonstrations support tactile representation learning and provide confidence-weighted auxiliary supervision through valid retargeted hand targets. We evaluate our system on four contact-rich manipulation tasks. Compared to conventional teleoperation, our proposed system achieves a 3.5-fold efficiency improvement while reducing demonstration acquisition equipment cost by 95.7%. We will open-source the TACROSS hardware and software system and publicly release a tactile dataset comprising over 150 hours of recordings. Project page: https://tacross-touch-project.github.io/.

Monocular videos of human manipulation provide abundant dexterous demonstrations, yet reconstructing hand-object interaction from a single view and transferring it to robot hands remain difficult, limiting their direct use for robot execution. Prior methods either require task-specific RL training, limiting scalability, or assume clean motion-capture trajectories and thus cannot operate directly on video. We present OmniHOI, a pipeline that turns an RGB video of hand-object interaction into an interaction-faithful trajectory on dexterous hands. The key idea is to enforce physical consistency using the evidence available at each stage: image evidence during reconstruction, contact geometry during retargeting, and dynamics during physics-in-the-loop refinement. Each stage optimizes the corresponding representation directly, correcting errors before they propagate downstream or must be absorbed by a learned policy. Across 150 motion-capture trajectories transferred to each of five dexterous hands with 6 to 22 DoF, we achieve 39-89% success, compared with at most 31% for prior transfer methods. On 60 monocular video clips, we achieve 53% success, compared with 28% for the best prior video-to-robot pipeline. Its trajectories also execute on a real bimanual robot across diverse tasks.

Tactile sim-to-real learning must bridge simulated contact and device-specific sensor responses while preserving information needed for control. We propose a factorized tactile representation and control framework that maps normal force and contact patch to an effective contact response recoverable from sensor readings. The response is separated into contact geometry, force distribution, and temporal contact change, with representation-specific encoding and randomization. A Tactile Gated Policy preserves these representations separately through control and operates over all mask configurations without retraining. We evaluate the approach through response reconstruction, spatial alignment, force regulation, and contact-rich adversarial peg insertion in simulation and the real world, enabling the utility and transfer reliability of different tactile representations to be assessed independently. The approach achieves <1 mm contact localization, 1.69 N force-tracking error on unseen geometries, and a 35% improvement in real-world adversarial peg insertion over the unfactorized response, with different tactile representations benefiting different interactions.

Tactile feedback provides embodied agents with physical information beyond visual observations, enabling more reliable interaction with the real world. However, despite the rapid progress of vision-tactile-language-action (VTLA) policies, there remains a lack of unified benchmarks for evaluating tactile-enabled robot manipulation across simulation and the real world. To address this gap, we introduce OpenViTac, a visuo-tactile manipulation benchmark for evaluating robot policies across simulation and the real world. OpenViTac organizes contact-rich manipulation into four tactile-relevant capability dimensions and provides paired simulation-real-world settings for consistent evaluation of VLA, WAM, and VTLA policies. Building upon this benchmark, we investigate how different tactile representations and integration strategies affect the performance of pretrained VLA models. Correspondingly, we introduce OpenVTLA, a tactile augmentation framework that combines the best-performing representation and integration strategy. Furthermore, we leverage the paired benchmark setting to study sim-real co-training and analyze factors affecting cross-domain policy learning. Together, OpenViTac provides a unified platform for evaluating and advancing visuo-tactile robot manipulation.

Large-scale egocentric human interaction data is becoming an important source of physical supervision for embodied learning, yet video alone leaves the contact and pressure that characterize physical interaction unrecorded. Recent visual-tactile datasets provide this missing supervision, but their synchronized tactile data remain far smaller in volume than human video. Moreover, the largest resources often merge recordings from different sensors or annotation procedures, which makes the effect of data scale difficult to isolate. We therefore introduce TouchScale, a 500-hour dataset of contact-rich human interaction recorded with a single unified wearable setup. Its approximately 2K predefined task descriptions span everyday activities and structured manipulation, and each recording temporally aligns egocentric RGB-D video with wrist RGB video and dense full-hand bimanual tactile measurements. Compared with prior tactile data, training on the full TouchScale raises zero-shot contact IoU on data from an unseen tactile sensor from 0.134 to 0.383. Pretraining a visual encoder on TouchScale also yields the highest action recognition accuracy on three benchmarks among the compared visual-tactile datasets. Used for visual-tactile mid-training of a robot policy, TouchScale improves the average real-world success rate across four contact-rich manipulation tasks from 22.5% to 57.5%. With the sensor and collection protocol held fixed, both zero-shot tactile prediction and robot success show an overall upward trend as more TouchScale data is used. These results suggest that human visual-tactile data collected at scale with consistent sensing benefits both perception and robot manipulation. We will publicly release TouchScale, including all synchronized visual-tactile recordings and reconstructed object models, to support future research on scalable visual-tactile learning.

Hair stroking is common in daily grooming and personal care, and is also widely used in hair-product evaluation, motivating robots with similar physical interaction capabilities. Existing robotic hair-care and surface-following methods mainly rely on trajectory planning, compliance, force regulation, or tactile-conditioned policies, but deformable hair can remain in contact while gradually drifting across the end-effector, making local interaction difficult to regulate. We propose TacHair, a tactile contact-distribution guided online correction framework that represents high-resolution tactile observations as a spatial hair-contact distribution. A visuotactile imitation policy generates the nominal stroking motion, while a separately trained residual module corrects local contact deviations, separating task progression from contact recovery. We evaluate TacHair in 525 real-robot trials across five head geometries and three hair conditions. A successful stroke requires both sufficient task progression and contact maintenance; our method improves success from 42.9% to 62.3% and contact maintenance from 59.4% to 88.0% over the same visuotactile policy without correction. These results demonstrate spatial tactile contact distributions as an effective feedback representation for contact-preserving interaction with deformable and visually occluded surfaces. Demos, code, and datasets are available at https://tachair.github.io.

Robot manipulation data collection has been shifting from teleoperation toward robot-free demonstrations, through interfaces such as the Universal Manipulation Interface (UMI) or directly from human hands. Vision-Language-Action (VLA) policies trained on such data inherit the demonstrator's timing. Yet human timing does not directly transfer to robots: compliant hands tolerate fast contact, whereas robots may overshoot due to actuator and tracking limitations; conversely, robots can move faster in free space. This motivates a unified approach that reconciles execution speed with contact safety. We present RoboPace, an online retiming layer that preserves the policy's geometric path while adapting its timing, respecting the target robot's kinematic and dynamic constraints. It adapts execution speed based on predicted contact, jointly accounting for contact-dependent speed limits and the robot's motion constraints. The method requires no policy retraining and operates in real time. Across three contact-rich tasks on a dual-arm robot, faster uniform execution and physical-limit-only retiming largely fail. RoboPace instead achieves higher overall success than slow uniform execution while completing four of five commands in approximately half the time, retaining the reliability of slow execution without its time cost.

Generalizable contact-rich manipulation requires robots to preserve intended task behavior while adapting its physical realization to changing contact conditions. However, interaction forces can vary substantially with small changes in surface geometry, orientation, and friction, making policies trained directly on raw force measurements difficult to transfer beyond demonstrated conditions. We introduce FACE, a contact-factorized imitation learning framework that separates intended task behavior from environment-dependent contact factors. Our representation expresses interaction forces in normalized, contact-relative coordinates, while a learned contact-normal estimator and an online friction estimator infer the local contact normal and effective friction scale. Together, these estimators enable force observations to be encoded and policy outputs to be decoded into physical motion and force commands during execution. In this way, FACE adapts execution to current contact conditions while preserving the intended task behavior, without updating the policy parameters. We evaluate FACE on real-robot contact-rich manipulation under unseen variations in surface properties and geometry, demonstrating robust generalization across contact conditions through controlled comparisons with variants that adapt prior approaches to our setting. Videos and additional materials can be found on the project page: https://rcilab.khu.ac.kr/face.

Humanoid robots operating in unstructured environments must combine robust whole-body control with the ability to perceive and physically interact with surrounding objects. While large-scale human motion data provides powerful priors for natural and versatile humanoid control, effectively transferring such priors to perception-driven object interaction remains challenging. To address this bottleneck, we propose a framework that extends the recently proposed Generative Pretrained Controller (GPC) from general human motion to full-body humanoid-environment interaction. First, we adapt GPC into interaction experts conditioned on scene affordance cues and privileged state information. These experts leverage the pretrained human motion prior while learning task-specific contact behaviors, including reaching toward objects, grasping environmental supports for stabilization, and pushing movable objects. Second, we introduce a perception-driven student that retains the pretrained GPC policy and distills interaction skills from the experts using onboard sensory observations. To bridge the gap between privileged expert observations and sensory inputs, we propose two complementary training objectives that enable effective adaptation of the pretrained motion prior during distillation. Notably, our experiments across multiple whole-body interaction tasks demonstrate that large-scale generative human motion priors provide an effective foundation for learning deployable policies for humanoid interactions in contact-rich real-world environments.

Dexterous manipulation poses a challenging high-dimensional optimization problem, as useful behaviors require coordinated motion across many hand joints. In reinforcement learning (RL) and sampling-based trajectory optimization, exploration commonly relies on independent robot joint perturbations, making coordinated behaviors difficult to discover. Prior work reduces this search space for grasp learning using low-dimensional spaces of coordinated joint motions learned from human hand data, but this restricts the expressivity required for general manipulation. Some combine learned and joint-space actions to restore expressivity, but this increases dimensionality and introduces redundancy. We study these effects across diverse manipulation settings, varying action dimensionality, exploration strategy, and the source of human data. Our experiments suggest that human-motion priors are most effective when used to structure exploration rather than change the action representation. Motivated by this finding, we propose EigenDEXplore, which induces correlated exploration by adding perturbations along human-derived eigenvectors to independent joint-space noise, leaving the action space unchanged. Across multiple dexterous hands, EigenDEXplore consistently outperforms joint-space and learned action-space baselines in grasping, in-hand reorientation, and contact-rich manipulation. These gains span unstructured and reference-guided RL, trajectory optimization, and sim-to-real deployment, and are largest in settings with less reward shaping and curriculum design.

Robots that autonomously determine their actions from language instructions and sensory observations could perform new contact-rich manipulation tasks without task-specific training or hand-designed rules. To perform these tasks, robots must infer how objects contact one another and move as a result, then select actions. For contact inference and action selection, prior approaches involve designing estimation models and tactile feedback control laws, or learning models for object-motion estimation, action-outcome prediction, and action selection from tactile data. Instead, we propose TacZero, which uses a pretrained general-purpose vision-language model (VLM) to interpret visual and tactile observations and select robot actions without additional tactile or manipulation training or task-specific rules for contact interpretation or action selection. TacZero provides the VLM with camera images, robot state, and three-axis tactile responses represented as numerical values or vectors overlaid on the images. From these observations and interaction history, the VLM generates commands specifying target end-effector positions and gripper opening or closing, which a low-level controller executes. In real-world cylindrical-peg insertion experiments, TacZero succeeded in 15 of 20 trials with numerical tactile input, compared with 10 of 20 without tactile input. This study provides a concrete starting point for further research on contact-rich manipulation using general-purpose VLMs and highlights challenges in pursuing this direction.

Human demonstrations offer rich examples of precise dexterous manipulation and a promising source of robot training data. However, high-fidelity reproduction of demonstrated motions and hand-object interactions across robot embodiments remains challenging under physical constraints. We present DexForge, a differentiable physics-grounded framework for converting human video demonstrations into high-fidelity robot trajectories. We reconstruct spherical-Gaussian object models and hand-object motion from visual observations, then build a differentiable simulator combining efficient Gaussian collision detection with existing differentiable dynamics. Based on this simulator, DexForge combines contact-aware kinematic retargeting with force-aware dynamics retargeting: robot-adapted stable contacts guide kinematic reference construction and subsequent gradient-based control refinement for precise physical motion reproduction. Experiments on 130 DexYCB and HOT3D demonstrations across seven dexterous hands show success-rate gains of approximately 35-53 percentage points over the baseline, with object position and orientation tracking errors on successful trajectories reduced by approximately 34-67% and 71-78%, respectively. Further experiments demonstrate open-loop transfer to MuJoCo and real-robot execution. Our project page is available at https://wmz1226.github.io/DexForge/

Teleoperated demonstrations are a primary source of data for robot manipulation, and teleoperated interventions are a primary mechanism for correcting policies at deployment. Yet most teleoperation systems close the loop through vision alone and are built around parallel-jaw grippers, limiting both what the robot can execute and what the operator can express through it. This is most damaging in shared autonomy, where the operator sees the scene only through occluded cameras and must take over a dexterous hand mid-task, often with an object already grasped. We present DITTO-X, a hand-agnostic dexterous teleoperation interface that renders joint-level force and fingertip contact events from sensing already on the robot hand, and drives three commercial dexterous hands (Sharpa, Wuji, and Inspire) without per-hand redesign. Because the exoskeleton is actuated, DITTO-X also supports reverse teleoperation, in which the robot back-drives the operator's fingers into its own configuration before control is transferred, so the human enters the loop already matched to the state they inherit. Our results show that DITTO-X improves demonstration quality and throughput over a commercial hand-tracking glove, both in regular data collection and in human intervention during policy deployment for contact-rich manipulation tasks. More information can be found from our website: https://tml.stanford.edu/ditto-x/.

General-purpose agents can plan, use tools, and revise their behavior from feedback, but it remains unclear whether these capabilities transfer from digital environments to embodied manipulation. To investigate this question, we introduce LIBERO-Agent, an agent-native benchmark for evaluating these agents in robot manipulation tasks. Rather than asking agents to submit task-level Python control programs or operate through high-level robot skills, LIBERO-Agent provides an interactive robotic environment where agents can select which observations to inspect, process them with their own tools, and issue native action commands. LIBERO-Agent integrates 200 tasks into a common interaction framework and provides a 30-task primary suite that separates perception, short-horizon execution, and long-horizon composition. Results reveal a pronounced reliability gap: while agents perform well on perception and easy short-horizon tasks, their performance degrades substantially on hard short-horizon and long-horizon tasks. Richer observations improve short-horizon manipulation, while demonstration benefits depend on the agent and format. Among these agents, GPT-6 Astra achieves the strongest overall performance. Further analysis shows its major advantage lies in mechanism interaction, especially when sustained physical contact is needed, while its remaining failures stem from cross-stage interference and geometric errors.

Robotic manipulation integrates vision, touch, and language, whose importance shifts across stages: vision guides reaching, while touch, through its evolution over time, decides grasping, alignment, and contact. Yet existing multi-modal manipulation policies typically use fixed temporal contexts and fusion strategies, despite shifts in what each modality contributes across different skills. We study how vision and touch should be combined at the level of primitive skills, asking what each skill needs from each sensor, and propose a skill-conditioned representation in which the queried skill conditions fusion over modality-specific short-term observation tokens while attending to a sparse event memory that retains terminal observations from the last $K$ executed skills. Evaluated by skill progress estimation on three contact-rich tasks, it reduces slip-detection delay by 87% against fine-tuned SOTA progress models, twist-completion delay by 67.5% against a vision-only ablation, and progress error on a blind search task by 92% through sparse event memory. Gains concentrate exactly where completion is defined by contact or task history. More broadly, our results suggest that observation formation not only policy architecture is a central challenge in multi-modal representation. Project Website: http://what-to-attend-what-to-keep.github.io/

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

Robotic foundation models (RFMs) are increasingly capable of general-purpose manipulation, yet reliable physical interaction remains challenging in contact-rich settings. We present FP2, a lightweight downstream interface that equips task-adapted RFMs with explicit force control while preserving their action-generation capability. FP2 adopts an action-regulation decomposition: the task-adapted RFM serves as a foundation policy responsible for task-level action generation, while a high-frequency force control policy focuses solely on interaction regulation. To condition force regulation on the ongoing manipulation, FP2 compresses foundation-policy contextual representations and combines them with wrench and proprioceptive histories to predict structured force-control parameters. We evaluate FP2 with four RFM backbones across four real-world contact-rich manipulation tasks. FP2 consistently improves task performance and force regulation quality over the corresponding foundation policies, while comparing favorably with representative force-aware and force-control baselines. Ablations further show that foundation-policy context and physical feedback are complementary for effective force regulation, while preserving foundation-policy action generation improves both efficiency and novel-object generalization. Project website: http://force-policy.github.io/fp2

Contact-rich manipulation requires robots to sequence precise contacts, maintain stable grasps, and apply directed forces. Reinforcement learning (RL) can acquire such behaviors automatically, but its performance hinges on reward design: sparse rewards reduce the learning efficiency, while dense rewards are hard to specify. Visual reward learning addresses this by inferring rewards from action-free demonstrations. Because it conditions only on visual observations, it fails to capture rewards beyond visual goals. We propose Tactile Reward Learning (TaRL), a framework that learns rewards from tactile demonstrations. TaRL takes a sequence of tactile deformation maps as input, and regresses task-completion progress from both successful and failed demonstrations. Because TaRL captures local robot-object interaction, it provides informative feedback to learn firm grasps and correctly directed forces; meanwhile, it is robust to changes in scene layout such as object position. We evaluate TaRL on four manipulation tasks in simulation and two in the real world. Used as a shaping reward, it substantially improves both sample efficiency and final success rate, raising success on Nut threading from 34% to 56% in simulation and on cube pickup from 37% to 97% in the real world. Combining tactile with visual rewards improves performance further. TaRL also generalizes across object instances: trained on box placement and directly deployed to can placement, it significantly improves policy learning on the new task. Project page is available at https://embodiedai-ntu.github.io/tarl.

We present a straightforward but effective method for repurposing existing contact-rich dexterous manipulation demonstrations. Starting from inputs of hand and object trajectories, our method outputs high-quality nonlinear trajectory warps that account for intermediate waypoints, environmental barriers, temporal shifts, and varied start/end configurations. Foundational to our method is the utilization of contact distributions, which we show allows us to reliably compute complex and high-dimensional dexterous hand trajectories following a simple object-centric warp specification pipeline. We evaluate our method across 12 variations sourced from 4 demonstrations in a publicly available dataset of human hand motion data, perform baseline comparisons, and demonstrate generalization of our approach to different manipulators. Results and code will be made available on publication.

Transferring human motion to humanoid robots requires adapting the demonstrated motion to the robot morphology while preserving interactions with the environment. This is particularly challenging for loco-manipulation tasks, where contacts with the ground and manipulated objects must remain consistent despite differences in body proportions. Yet, skeletal motion alone does not fully describe these interactions, and fixing object trajectories limits the adaptation to a new embodiment. In this paper, we introduce OTR ETARGET, a unified approach to jointly retarget robot and multi-object motion from human demonstrations. Our approach represents surface interactions through signed distances, closest surface points, and relative directions, and uses entropic optimal transport to transfer these quantities across human, robot, and object geometries. We incorporate the resulting interaction targets into a constrained inverse kinematics formulation that balances contact preservation with motion style and jointly optimizes robot and object poses at each frame. This formulation accommodates robot-object and object-object interactions without rescaling the scene or the demonstration. We validate the proposed approach on OMOMO, where it achieves a robot- object interaction Jaccard score of 87% and a depth error of 8.7 mm, compared with 28% and 29.3 mm for OmniRetarget. Finally, we demonstrate transfer to a physical G1 humanoid using whole-body policies trained with reinforcement learning on the retargeted references, across motions including two-handed box pick-and-place onto a table.

Contact-rich dexterous manipulation requires policies that translate physical feedback into motion commands while regulating interaction loads across evolving multi-contact interactions. This requires haptic observations of contact state and action supervision showing how commands should adapt. Existing policies often overlook complementary fingertip tactile and joint-torque feedback, while common action targets either encode excessive loading or omit motion constrained by the object. We introduce HACo, a Haptic Active Compliance policy that learns force-regulating actions directly from haptic feedback. Compliance-regulated teleoperation converts operator inputs into controller-executable compliant actions that preserve motion intent while regulating loads. HACo learns these actions directly, using command-state discrepancy as auxiliary compliant-intent supervision. It combines local fingertip tactile responses with joint-torque feedback capturing load transmission through the articulated hand, including contacts beyond tactile coverage. A Compliance Grounding Module uses gated haptic cross-attention to ground action generation in the evolving haptic state, enabling closed-loop force regulation without explicit online contact modeling. We evaluate HACo on a real-world benchmark covering multi-contact friction, tangential interaction, fragile curved-surface contact, rotational torque, and deformable-object manipulation. Across 20 trials per task, HACo achieves an 83% mean success rate, compared with 35% for the strongest evaluated baseline. These results demonstrate active compliance across diverse force-sensitive dexterous manipulation tasks.

Learning from demonstration (LfD) has enabled humanoid robots to acquire diverse whole-body skills, but extending this paradigm to human-object interaction (HOI) is limited by the availability of robot-compatible interaction references. We present HOI-Retarget, a contact-centric retargeting method that transfers HOI onto a humanoid robot for large-scale motion-data generation. Its windowed trajectory optimization uses every labeled contact as a target in the object frame, balancing body tracking, foot support and smoothness under the robot's kinematic limits. The method can augment a single demonstration across object sizes, absorb contacts reconstructed from monocular video, and extend to several robots manipulating one object. We publicly release the code and the retargeted motion dataset.

Dexterous manipulation requires tactile feedback. However, robot tactile demonstrations are difficult to scale,because dexterous-hand teleoperation provides limited tactile feedback to the operator. In contrast, human demonstrations offer a substantially more scalable source of diverse tactile interactions. Motivated by a simple premise: hands can change, but the underlying physics of interaction does not. We leverage human tactile data to improve dexterous manipulation policies. Specifically, we first build a tactile motion-capture system that synchronously records images, tactile signals, and hand motions. Using this system, we construct the UVTA dataset spanning five contact-rich tasks, with 1,000 human demonstrations covering diverse interaction patterns and 150 robot demonstrations per task. To transfer the underlying physics of human interaction to robot control, we propose a Unified Visual-Tactile-Action Model that maps both embodiments into aligned tactile and action representations and jointly predicts future action and tactile trajectories. The joint objective enables human demonstrations to supervise contact-aware representation learning, while only robot actions are executed during deployment. In real-robot evaluations across five tasks, our method achieves an average success rate of 70%, outperforming the strongest visual-tactile baseline, which achieves 29%, and an architecture ablation, which achieves 42%. Performance improves consistently with additional human demonstrations and exhibits no saturation at 1,000 demonstrations per task, validating the effectiveness of scalable human tactile data for dexterous manipulation. Project page is available at https://uni-vta.github.io/.

Contact-rich policies often fail because distinct physical states look alike yet require different actions. Cameras may not reveal whether a connector is aligned or fully seated, while many normal-only tactile sensors can miss the tangential interactions perpendicular to the grasping direction that distinguish these states. We ask whether a learning policy needs calibrated shear measurements, or only a repeatable observation that separates shear-dependent contact states. We introduce TacGooseBumps (TacGB), a passive domed film that mechanically encodes tangential loading as pattern changes in an existing sensor's pressure map. Tangential loading tilts each dome and redistributes pressure across its footprint; an end-to-end policy consumes the resulting maps without added electronics, force reconstruction, or taxel-level dome alignment. Across four imitation-learning tasks and two data-collection pipelines, TacGB improves goal attainment, efficiency, and contact quality: insertion success increases by up to 36 percentage points, and successful insertions are completed faster, while fragile-object placement becomes gentler and drawing becomes more continuous and straight. Signal, stage-wise, failure-mode, and trajectory analyses link these gains to contact regimes in which task-relevant tangential interactions are poorly resolved by vision and normal pressure alone. Together, these results show that shear need not be measured metrically to benefit robot learning; it can instead be mechanically encoded without changing the underlying tactile sensor or the policy's pressure-map input format.

Manipulating a Rubik's Cube with a single dexterous hand is a challenging test of sustained, contact-rich control: the hand must execute successive layer turns while keeping the cube secure. Each turn requires some fingers to support the cube while others push a moving layer, release contact, and reset for the next move. To learn this coordination, we introduce FINGR (Future-supervised Interaction Network with Geometric Representations), a policy that combines finger-relative geometry with future interaction prediction. A shared point encoder expresses the cube relative to each fingertip and aggregates its points without depending on cubie indexing. Learned future tokens share the observation encoder and receive supervision for contact-force changes, layer-turn progress, and finger joint displacement at multiple time scales. The resulting representation conditions a flow policy that directly generates finger actions. On a real dexterous hand, our policy achieves 99.0% success over 300 turn attempts, compared with 79.7% for the base flow policy. Integrated with grasping and table-assisted regrasping, the policy solves all ten scrambled $2\times2\times2$ cubes in a mean complete-system time of approximately 137 seconds. The project website is available at https://www.lyt0112.com/projects/FINGR

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

Coding agents have demonstrated enormous success in solving complex programming problems. To leverage their potential for robot systems, this work introduces Robot Agentic Programming from Demonstrations (RAPID), which automatically generates, verifies, and refines robot programs, given a single visual human demonstration. The iterative agentic loop of code refinement requires several key ingredients: (i) a testable task specification, (ii) action primitives for robot execution, and (iii) an interactive environment for program execution and verification. RAPID infers all three from the demonstration automatically. To make the resulting program reusable beyond the demonstration setting, RAPID uses an object-centric relational program representation that focuses on the underlying structure of the demonstrated strategy rather than the specific motion per se: it expresses the action primitives as trajectory-optimization programs that realize object-level motion effects, while composing them through relational constraints that capture scene-specific geometry at run time. We evaluated RAPID in simulation on eight challenging contact-rich nonprehensile manipulation tasks as well as general prehensile manipulation tasks in the LIBERO-Pro benchmark. We also successfully deployed it on a real Franka arm and evaluated on all eight nonprehensile tasks. In all experiments, RAPID demonstrated strong performance, with generalization over object pose, shape, material, and environment. Website: https://yuyaoliu.me/projects/rapid.

In this paper, we study the joint selection of an environmental support contact and a whole-body configuration for a prescribed loco-manipulation task. A contact may provide greater physical support while restricting the motion required for the task. We formulate this problem through three capability measures: residual wrench, end-effector reach, and base mobility available after satisfying the task requirements, and we balance them against contact acquisition cost. Evaluating these capabilities for every candidate requires repeated whole-body optimizations. To reduce this computational cost, we propose Capability-Tradeoff Contact Selection (CTCS). CTCS screens candidates for contact and task feasibility, groups similar candidates within each surface, and predicts their capabilities from exact anchor evaluations using local sensitivity analysis. It checks these predictions through selective exact evaluations, ranks candidates by capability, and evaluates a shortlist exactly for final selection. We evaluate CTCS in simulations and hardware experiments using a Unitree Go2 quadruped with an AgileX NERO arm across $392$ task conditions with nine available support surfaces. Results show that CTCS outperforms ground-only and fixed-contact support, as it can select support surfaces that provide favorable capability trade-offs for the task. Compared with evaluating every candidate exactly, CTCS achieves approximately $3\times$ speedup while closely matching the resulting mean objective value.

Robust dexterous grasping requires maintaining physical stability despite contacts interactively evolving across the entire hand. A precomputed force distribution can easily fail under object motion, modeling errors, or external disturbances. In this paper, we present a framework for real-time force regulation over dynamically changing whole-hand contacts. Our method geometrically estimates contacts across all hand links using a tracked object model and proprioception, without requiring tactile sensing at those contacts. It repeatedly recomputes the desired contact-force distribution subject to friction constraints, actuator limits, and an actuation-consistency constraint motivated by classical whole-limb force analysis. We integrate this force-regulation controller with reactive reaching, enabling the hand to acquire a grasp, maintain it under disturbances, and regrasp after losing the object. Simulation experiments without gravity demonstrate improved grasp retention over fixed-allocation and fingertip-only execution under controlled perturbations, while real-world experiments on a 27-DoF arm-hand system demonstrate grasp maintenance and recovery under human-applied disturbances as contacts evolve across the whole hand. Project page: https://sangminkim-99.github.io/reactive-grasp-whole-hand/