In-Memory Computing

Learning and decision-making in animals are often modeled as Bayesian processes, where sensory evidence is integrated with prior beliefs to guide behavior in the face of uncertainty. But what are the inherent neural dynamics that give rise to this ability, and how could they be replicated in computing systems? This abstract discusses a biologically grounded framework in which noisy neural and synaptic dynamics perform inference and learning via stochastic sampling from an internal energy function, capturing uncertainty over latent states and model parameters through neural and synaptic variability, respectively. This enables approaches such as predictive coding networks to account for epistemic uncertainty via Markov chain Monte Carlo sampling. Drawing a parallel between intrinsic noise in biological systems and electrical noise in emerging probabilistic analogue memory technologies, we highlight how analogue in-memory computing hardware naturally emerges as the solution for massively scalable and energy-efficient probabilistic inference.

Analog in-memory computing (AIMC) speeds up neural-network inference by doing the arithmetic directly inside a memory array, instead of shuttling weights back and forth between memory and a processor. This saves energy, but the physical devices that store the weights are imperfect: programming errors, electrical noise, limited-resolution converters, and outright broken cells all distort the computation, and every physical chip is distorted in its own way. A designer with several such chips available faces an uncomfortable choice: run all of them and combine the answers (safe, but wasteful of energy), or trust a single chip blindly (cheap, but with no guarantee on how often it is wrong). This paper introduces RACE-AIMC (Risk-Aware Certified Ensemble for AIMC), a framework that resolves this choice with statistics rather than guesswork. Offline, RACE-AIMC studies a pool of physical accelerators, picks the single best one for a given energy budget, and computes a mathematically exact upper bound on how often that accelerator will be wrong when it chooses to answer. Online, only that one accelerator is switched on; a lightweight check decides whether to accept its answer or defer to a fallback. In our simulations using a noisy weight mapping and multiple independent test runs, every certified bound stayed under a 10% error target (mean bound 7.83% +- 0.89%, with 70.88% +- 0.98% of inputs answered directly). The resulting system matches the accuracy of a clean digital baseline while cutting modeled energy use by 69.02% relative to always running every accelerator in the pool.

Diffusion models achieve strong image generation quality but incur high iterative denoising costs. Analog compute-in-memory (CIM) can accelerate matrix-vector multiplications, yet spatial memory variations perturb weights and accumulate during sampling. Unlike conventional neural networks, diffusion models' temporal sensitivity to hardware noise remains underexplored. We investigate diffusion inference using a noise model calibrated and validated against measurements collected from multiple physical CIM chips. Our results show that the early, high-noise denoising stage is substantially more vulnerable than the final refinement stage. A first-order trajectory analysis attributes this behavior to the repeated propagation of correlated prediction errors induced by a fixed hardware mapping. Based on this observation, we propose ASSERT, a training-free sampler that uses higher stochasticity early and smoothly transitions to deterministic denoising. The injected stochasticity changes subsequent activation trajectories and thereby reduces their alignment with persistent spatial errors. Across the evaluated settings, ASSERT achieves up to 2.58$\times$ lower FID than deterministic DDIM on high-resolution datasets and 7.68$\times$ lower FID in the CIFAR-10 step-count study, without changing model parameters or the number of network evaluations.

The computability of real numbers and functions using Turing Machines has been a central area of theoretical computer science since the mid-20th century. In the late 20th century, it was shown that chemical reactions can serve as a basis for computation using the Chemical Reaction Network (CRN) model. Recent advances in computing real numbers using Deterministic Chemical Reaction Networks (DCRNs) have identified numerous classes of DCRN-computable real numbers. In parallel, the works of R. Landauer and C. H. Bennett, spanning the 1960s to the early 2000s, showed that reversible computing offers significant advantages over irreversible methods, particularly in energy efficiency, motivating extensive research on reversible computation. In this work, we investigate the computability of real numbers using Reversible Chemical Reaction Networks (RevCRNs). The paper has two primary contributions: (1) establishing relationships among CRN-computable real number classes including Lyapunov CRN ($\mathbb{R}_{LCRN}$), Real-Time CRN ($\mathbb{R}_{RTCRN}$), rational numbers ($\mathbb{Q}$), and RevCRNs ($\mathbb{R}_{RevCRN}$), with key results: (i) $\mathbb{Q}$ is a strict subset of $\mathbb{R}_{RevCRN}$; (ii) the set of positive algebraic numbers ($ALG$), $\mathbb{R}_{LCRN}$, and real numbers computable by 1-species RevCRN ($\mathbb{R}_{RevCRN}^{1s}$) are equal; (iii) $\mathbb{R}_{RTCRN}$ and $\mathbb{R}_{RevCRN}$ exhibit non-empty overlap; and (iv) the set of real numbers computable by detailed-balanced RevCRNs ($\mathbb{R}^{DetBal}_{RevCRN}$) is a subset of $ALG$; and (2) exploring the existence of a hierarchy within $\mathbb{R}_{RevCRN}$. Finally, we leave open the exact relationship between $\mathbb{R}_{RevCRN}$ and $\mathbb{R}_{RTCRN}$ while conjecturing a general hierarchy of RevCRN-computable reals.

Analog compute-in-memory (CIM) enables energy-efficient neural network inference, but device variation and read noise can severely degrade low-bit quantized models. Existing CIM-oriented quantization methods mainly minimize ideal quantization error, ignoring the hardware noise floor and thus causing inefficient precision allocation. We propose NANQ, a noise-aware mixed-precision non-uniform quantization framework for analog CIM. NANQ models magnitude-dependent weight noise from measured responses of an eFlash CIM array and converts the noise profile into an adaptive quantization density, assigning finer resolution to low-noise regions while avoiding ineffective precision in noise-dominated regions. It further assigns layer-wise bit-widths by identifying each layer's precision saturation point under hardware noise using a unified threshold. On-chip experiments on an eFlash CIM SoC show that, under 2-bit weight-magnitude quantization, NANQ improves vision-model accuracy by 8.05 percentage points and reduces language-model PPL by 54.7% on average over PowerQuant. Mixed-precision NANQ captures most of the gains obtainable from additional quantization resources with only 3.2-3.8 equivalent bits.

We show with experiments and system-level simulations that it is possible to successfully mitigate the impact of retention loss on inference accuracy degradation by using both circuit-level compensation techniques and batch normalization recalibration at the algorithmic level. Experiments are performed on a single-poly floating-gate (FG) analog non-volatile memory array for analog in-memory computing fabricated in a standard 65 nm CMOS. We use a model of retention-loss statistics calibrated with experiments to evaluate the system-level impact on neural network models such as VGG-10/CIFAR-10 and WideResNet-28-10/CIFAR-100. We show that, after 60 days since programming, combined mitigation techniques enable to recover the baseline inference accuracy within 2-4%

Monte Carlo tree search (MCTS) enables artificial intelligence (AI) decision-making, but requires 55-300 W on conventional processors, limiting edge deployment. In-memory computing (IMC) is energy-efficient on regular workloads but has been considered incompatible with irregular multi-phase algorithms. We introduce phase-to-primitive decomposition, which reformulates each algorithmic phase as a hardware-native IMC primitive. Applied to MCTS, selection, expansion, rollout and backpropagation map to content-addressable memory, combinational logic, a resistive random-access memory (RRAM) crossbar and static random-access memory, keeping search on chip. At 22 nm with fabricated RRAM-array parameters, IMC-MCTS consumes ~60 mW for 9x9 Go, achieving 96x energy efficiency over a central processing unit (CPU) and 65x-2,059x over an H100 graphics processing unit (GPU). It reaches a European Go Federation rating within sample-size uncertainty of open-source Go engines (Pachi-UCT and Michi-C). The same substrate runs eight applications across four AI domains.

Transformers are widely used across many domains, including natural language processing, computer vision, web search, and DNA sequence analysis. Given their broad applicability, improving the performance of transformer models is critical. However, the high volume of data movement between processing units and memory during attention operations significantly limits their efficiency. Processing-In-Memory (PIM) mitigates this issue by performing computations directly inside memory. While prior work has proposed PIM-based transformer implementations, they suffer from costly inter-bank communication, and struggle to scale due to the limited capacity of memory banks. As a result, attention-related data must be split across banks, diminishing the potential benefits of PIM. In this work, we propose RED-PIM, an algorithm-architecture co-design that reduces attention latency by minimizing inter-bank data movement from O(N^2) to O(N) and shrinking intermediate attention matrices from N x N to d x d. By reorganizing matrix operations, performing computations locally, and employing an optimized data transfer strategy, RED-PIM significantly reduces computation cost and interconnect traffic. Compared to baseline PIM implementation, RED-PIM achieves inference time reductions ranging from 16.05% to 99.99% (geometric mean of 66.42%), with the largest gains on longer sequences. On real-world datasets, RED-PIM improves performance by 99.60% for long documents and 13.44% for shorter ones, while maintaining or improving accuracy. These results demonstrate RED-PIM's effectiveness for scalable and efficient transformer inference.

Several edge computing platforms, such as autonomous vehicles and smart sensing devices, need to adapt to dynamic environments in real time by learning from new data in the field. Continual learning has emerged as a promising solution for edge training, by incorporating techniques that successfully combine a highly summarized version of previously trained data (to avoid catastrophic forgetting) with recently sensed data. However, as is the case with other ML algorithms, continual learning generates significant data movement between general-purpose CPUs/GPUs and memory, impacting the suitability of continual learning for edge platforms. In-memory computing (IMC; also known as processing-using-memory) can curtail this waste and make continual learning feasible at the edge, but it faces two unique challenges: (1) IMC architectures make use of noisy computation operations that significantly harm training accuracy; and (2) IMC architectures have poor and often incomplete support for resource-efficient training. To address these challenges, we propose CLASP (the Continual Learning Acceleration System Platform), which to our knowledge is the first end-to-end system with IMC acceleration for continual learning. The hardware and software of CLASP are co-designed to support a wide range of continual learning algorithms, through software-visible assembly-level instructions that can be incorporated without constraints into ML-based algorithms. CLASP is designed around a back-end-of-line (BEOL) compatible ECRAM device that we fabricate, which can overcome the challenges of IMC-based training using other emerging memory devices. We show that CLASP with ECRAM approaches the accuracy of in-GPU training, while delivering a speedup of 67x and energy savings of 132x for learning without forgetting and experience replay using MNIST.

Processing-In-Memory (PIM) has emerged as a promising technology for accelerating machine learning (ML) workloads. Specifically, non-volatile memory-based PIM architectures have enabled effective ML acceleration due to their ability to perform energy-efficient matrix-vector multiplication operations. However, these devices suffer from non-idealities such as thermal noise. This noise alters the stored values in the memory cells which correspond to actual model weights, compromising the inference accuracy. In this work, we introduce ThRIve, a noise-aware training methodology that leverages low-rank adaptation to enable thermally robust inference on heterogeneous PIM architectures. ThRIve selectively stores these low-rank noise-aware parameters on a hardware that is less susceptible to thermal noise, enabling robustness against temperature-induced noise variations. ThRIve mitigates the effects of thermal-noise and prevent the drop in inference accuracy across the entire operating temperature range. Experimental results demonstrate that ThRIve-enabled architectures maintain consistent inference accuracy, with the mean accuracy staying within 2% of the ideal (i.e., noise-free) accuracy, and the variation in accuracy across the entire operating temperature range remaining within 2% of the mean. The proposed methodology achieves accuracy and robustness comparable to thermally-resilient Static Random-Access Memory (SRAM)-based PIM systems, while delivering up to 5.4x reduction in energy-delay product (EDP) during CNN model inferencing.

This paper reports a convergence neither program was looking for. Marcus's The Algebraic Mind named three things any architecture needs -- operations over variables, recursive structure, and individuals distinct from kinds -- showed multilayer perceptrons have none, and left a register-and-treelet implementation as conjecture. Thagard's Brain-Mind ran it from the other end, making binding the mechanism from which the whole of mind is assembled, and circular convolution load-bearing. Marcus leaves his register algebra open; Thagard's is lossy, degrading under the very recursion his own account demands. VaCoAl is a hyperdimensional computing architecture built end-to-end on XOR-and-shift over GF(2) via primitive-polynomial LFSRs; PyVaCoAl is its extended software realization (all results here); the silicon substrate exists as CASRAM. Bind(R,F) = R XOR Shift(F) is exactly reversible and non-commutative: it supplies all three pillars at fixed dimension and removes convolution's depth degradation. Capability: exact reversible binding at O(N) yields compositional generalization with post-hoc auditability, which no lossy or learned substrate offers. Necessity: two independent architecture programs and the dentate gyrus-CA3 circuit require the same algebra -- convergence, not biomimicry. New here: discrimination and failure-tolerance are one. Repair every collision (RR = 1) and the system is bit-identical to a hash dictionary: candidates become indistinguishable and the confidence path-integral collapses; a memory that never fails keeps no record of which routes were hard. Position: we do not surpass large language models but supply the auditable, multi-hop relational reasoning embeddings lack. No consciousness is implemented and no cognitive experiment reported; bit-exactness holds in silicon, approximately under biological noise; speed and power remain unbenchmarked.

To address the escalating energy and latency demands of machine-learning workloads, we introduce a blueprint for an energy-efficient and fast thermodynamic computing stack that leverages stochastic analog processes in physical hardware. In this work, we focus on energy-based thermodynamic computing where the stochastic process is well described by Langevin dynamics with tunable energy potentials. The implementation of such potentials in physical hardware enables us to generate and sample from basic parameterized energy-based models. We demonstrate how to construct and train popular classes of machine learning models based on these hardware-native energy-based models, using the framework of probabilistic graphical models. We analyze the runtime and energy consumption of different models in this thermodynamic paradigm based on theoretical considerations and numerical studies. As a preliminary experimental realization of such hardware, we present our stochastic analog superconducting circuits driven by thermal noise. Together, these results outline a path toward energy-efficient thermodynamic hardware for probabilistic machine learning.

Recent FPGAs have improved deep learning (DL) inference efficiency through dedicated tensor blocks and in-BRAM computation. ReRAM-based analog in-memory computing (IMC) pushes efficiency further, offering an order-of-magnitude improvement in compute density and energy efficiency over conventional digital logic by performing vector-matrix multiplication (VMM) directly within the ReRAM crossbar; prior work has integrated such IMC blocks into FPGAs for DL inference. However, conventional IMC designs support only static-weight VMM, leaving nonlinear operations and dynamic matrix-matrix multiplication (DIMM) to the FPGA fabric. As a result, the benefits of IMC are largely confined to static-weight models, whereas Transformer-based models, which rely on frequent nonlinear and DIMM operations, gain only limited improvement. Moreover, the ADCs within each IMC block consume more than 70% of its area and power, further limiting system efficiency and scalability. To address these limitations, we propose a novel FPGA architecture that integrates an ADC-free IMC block, replacing the conventional ADC with analog content-addressable memories (ACAMs) that natively perform nonlinear operations inside the block. To fully exploit this block, we conduct an FPGA-aware design-space exploration that determines optimal crossbar dimensions while balancing FPGA area, flexibility, and DL performance, and we develop an efficient mapping that leverages ACAMs to carry out DIMM operations, extending the applicability of IMC to attention computation. On CNN and Transformer-based benchmarks, the proposed architecture achieves up to 40x and 1.9x higher energy efficiency and 4.1x and 2.5x higher area efficiency, respectively. Overall, it significantly improves FPGA DL inference efficiency and sustains robust gains on Transformer-based workloads across long input sequences, advancing domain-specialized FPGA design.

Low-bit GEMM is increasingly central to efficient ML inference, yet very-low-bit execution remains a poor fit for conventional CPUs. Practical deployment spans fragmented regimes-from 1/2/4-bit weights to varying activation precision-whose feasibility, reuse opportunity, and support cost differ under fixed SIMD and register-file budgets, making lightweight CPU support selection a first-class design problem. We present ExaGEMM, a workload-aware codesign and exploration framework for CPU-native low-bit GEMM via register-resident LUT execution. The key insight is that existing SIMD datapaths already cover table generation and accumulation; the only new hardware is an in-register select/feed mechanism with explicitly modeled cost. ExaGEMM co-explores parameterized kernels and lightweight SIMD ISA support using analytical models of register feasibility, compute cost, memory traffic, and hardware overhead, pruning the candidate space by 99.2% before simulation. It then identifies non-dominated support points and generates ISA specs, gem5 patches, and GEMM kernels for validation. Across representative ML models and CPU targets, ExaGEMM improves latency by 13.29x over software-only baselines, while showing that workload-aware frontier selection is especially important for mixed-precision LLM workloads.

Computing-in-Memory (CIM) accelerators execute Matrix-Vector Multiplications (MVMs) in memory, making them a compelling solution for Machine Learning (ML) workloads. However, existing ML workload partitioning approaches for CIM accelerators do not fully account for Resistive Random Access Memory (RRAM) constraints such as limited memory, high write latency, and limited endurance. They also neglect parallelism, low-level architectural effects, or the Central Processing Unit (CPU) as a complementary compute resource. To address these limitations, we propose an Integer Linear Programming (ILP)-based workload partitioning framework for heterogeneous CPU-CIM systems. It minimizes end-to-end inference latency under RRAM constraints, captures parallelism, and combines empirical profiling with analytical models. Using our framework, heterogeneous CPU-CIM execution achieves speedups of up to 30.9x over CPU-only execution on an edge CPU and 7.3x over a high-performance CPU. A Design Space Exploration (DSE) yields further design insights for future CIM accelerators.

Traditional CPU, GPU, and NPU architectures are increasingly limited by the von Neumann bottleneck. While In-Memory Computing (IMC) using ReRAM crossbar arrays offers a high-density, energy-efficient alternative, its practical deployment is constrained through their non-idealities. Existing hardware-aware training frameworks often require training from scratch, which is computationally prohibitive for modern large-scale models. In this work, we propose a finetuning-based hardware-aware training algorithm that enables robust DNN deployment on ReRAM with minimal training overhead. Our approach mitigates I-V non-linearity by applying a range-shrunk sinh transformation and incorporates retention errors directly into a regularization loss during the finetuning process. We evaluate our framework across models and tasks such as image classification and question-answering (QA). Experimental results demonstrate that our method achieves similar accuracy on large-scale models like ResNet18 and DeiT-Tiny as the base model. In-case of ImageNet for MobileNetV3 families the technique has only less than 2% accuracy degradation. Further, applying the technique on the SQuAD v2 dataset results in only 1 point degradation of F-1 score.

Neural dynamical systems are expressive temporal predictors that capture continuous-time dynamics through fine-grained state updates. However, this sequential structure maps poorly onto digital hardware optimized for dense matrix operations, a mismatch that analog neuromorphic computing, with its native continuous-time dynamics, can resolve. We introduce FerroNDS, a neuromorphic system built from two analog primitives: an integrator for temporal accumulation and an oscillator for frequency-selective filtering. We map this system onto compute-in-memory hardware based on multi-bit ferrodiodes. A 128-neuron instance of FerroNDS computes short-time Fourier transform and forecasts a 500-ms horizon for periodic, quasi-periodic, and chaotic signals. The system achieves sub-watt real-time operation with per-neuron per-inference energy of 1.64 $μ$J (200 Hz) and 0.29 $μ$J (10 kHz), 25-40$\times$ area reduction over SRAM-based digital systems, and per-layer latency of 3.18 ms (200 Hz) and 63.87 $μ$s (10 kHz). To our knowledge, this is the first end-to-end integration of a ferrodiode into a neuromorphic computational framework, establishing ferroelectric compute-in-memory as a practical substrate for analog neural dynamical systems.

Memristors provide a new chance for resource-efficient computation of neural models for natural language processing by enabling analog execution of vector-matrix-multiplication. Yet, computations on these devices are currently subject to larger distortion, both in weight programming and execution. In this work, we identify large output values of transformed positional encodings to cause major degradation within analog-to-digital conversion (ADC) as part of memristor-based computation. By adjusting the proportion of weight and precision bits of the ADC of specific memristor layers, we reduce the degradation of the execution by ~50% relative, while keeping the estimated energy consumption stable. Additionally, we investigate scenarios where the ADC cannot be modified. In that case the degradation can be reduced by ~30% relative after removing encoding-related linear transformations.

In recent years, driven by the computational demands of data-intensive applications such as artificial intelligence and scientific computing, analog computing has gained renewed interest. Given the diversity of computational tasks and recent advancements in analog CMOS circuits and resistive memory technologies, we refer to the evolving landscape as modern analog computing. In this context, we identify three core computational primitives: solving differential equations, solving matrix equations, and performing matrix-vector multiplications, and we explore the connections among them. We also examine various hardware implementations of these analog computing operators, including those built with discrete components, integrated circuits, and resistive memory devices. Among these, resistive memory arrays emerge as particularly promising due to their implementation efficiency. The paper then surveys recent progress in leveraging modern analog computing to solve differential and matrix equations using both advanced analog CMOS circuits and resistive memory arrays. Finally, we discuss the applications of these circuits, the precision and scalability issues and their potential solutions, the relationship with in-memory computing, and the unique computational complexity of analog computing. This paper provides a unified perspective on analog computing, highlighting its strengths, current developments, and challenges, and positioning it as a pivotal enabler of next-generation computational frontiers.

Deep neural networks (DNNs) have achieved state-of-the-art performance across diverse domains. However, typical Von Neumann compute paradigms face severe memory bottlenecks. Emerging near-memory and compute-in-memory approaches alleviate this but incur significant peripheral overhead. Computational Random Access Memory (CRAM) based on MRAM enables in-situ logic without peripheral overhead, offering a dense, energy-efficient solution. However, probabilistic MRAM switching induces gate-level errors that limit the scalability and reliability of CRAM for accelerating DNN. Moreover, the large number of sequential MRAM writes severely constrains CRAM throughput. To address these challenges, we propose an error-resilient CRAM (CRAM-ER) architecture for scalable in-memory matrix-vector multiplications (MVMs). Our error-aware hardware-software co-design framework leverages a hybrid spintronic-CRAM + CMOS adder-tree architecture to mitigate the impact of device-level errors, demonstrating MVM functionality with high area and energy efficiency. We further develop an error-aware model fine-tuning and fine-grained error correction for enhanced error resilience. Evaluations of the CMOS+spintronic hybrid architecture on DNN benchmarks show near-lossless accuracy while reducing CRAM latency by up to 2 orders of magnitude, outperforming CPU/GPU+high-bandwidth DRAM in both energy efficiency and energy-delay product.

Modern edge devices increasingly rely on neural networks for intelligent applications. However, conventional digital computing-based edge inference requires substantial memory and energy consumption. In analog radio frequency (RF) computing, a base station (BS) encodes the weights of the neural networks and broadcasts the RF waveforms to the clients. Each client reuses its passive mixer to multiply the received weight-encoded waveform with a locally generated input-encoded waveform. This enables wireless receivers to perform the matrix-vector multiplications (MVMs) that account for most of the computation burden in edge inference with ultra-low energy consumption. Unlike conventional downlink transmissions which are optimized for communications, analog RF computing requires a computing-centric physical layer that controls both the analog MVM accuracy and the energy consumption for inference. Motivated by this, in this paper, we propose a physical layer design framework for analog RF computing in MU-MIMO wireless systems. We derive tractable models for computing accuracy and energy consumption for inference, formulate a joint BS beamforming and client-side scaling problem subject to computing accuracy, transmit power, and hardware constraints, and develop a low-complexity algorithm to solve the non-convex problem. The proposed design provides client- and layer-specific accuracy control for both uniform- and mixed-precision inference. Simulations under 3GPP specifications show that analog RF computing can significantly reduce client-side energy consumption by nearly two orders of magnitude compared to digital computing, while mixed-precision inference requires even lower energy consumption than uniform-precision inference. Overall, these results establish analog RF computing over wireless networks as a promising paradigm for energy-efficient edge inference.

Large language models (LLMs) with mixture-of-experts (MoE) architectures achieve remarkable scalability by sparsely activating a subset of experts per token, yet their frequent expert switching creates memory bandwidth bottlenecks that compute-in-memory (CIM) architectures are well-suited to mitigate. However, analog CIM systems suffer from inherent hardware imperfections that perturb stored weights, and its negative impact on MoE-based LLMs in noisy CIM environments remains unexplored. In this work, we present the first systematic investigation of MoE-based LLMs under noise model calibrated with real chip measurements, revealing that hardware noise critically disrupts expert load balance and renders clean-trained routing decisions consistently suboptimal. Based on these findings, we propose ROMER, a post-training calibration framework that (1) replaces underactivated experts with high-frequency ones to restore load balance, and (2) recalibrates router logits via percentile-based normalization to stabilize routing under noise. Extensive experiments across multiple benchmarks demonstrate that ROMER achieves up to 58.6%, 58.8%, and 59.8% reduction in perplexity under real-chip noise conditions for DeepSeek-MoE, Qwen-MoE, and OLMoE, respectively, establishing its effectiveness and generalizability across diverse MoE architectures.

Hardware-aware training (HAT) is widely used to improve the robustness of neural networks on non-ideal AI accelerators, such as analog in-memory computing (IMC) systems. However, not all hardware-induced distortions are equally compensable by training. This paper presents a diagnostic framework that models hardware non-idealities as structured perturbations of the forward operator and evaluates their compatibility with gradient-based optimization. We analyze six representative perturbation classes--read noise, variability, drift, stuck-at faults, IR-drop, and ADC discretization--and identify three key diagnostics: gradient expectation consistency, bounded gradient variance, and non-degenerate sensitivity. Our results show a clear separation between perturbations that can be compensated by HAT and those that consistently break optimization. This provides practical guidance for hardware-software co-design, clarifying which non-idealities can be addressed at the training level and which require circuit-, architecture-, or calibration-level mitigation. This study should be interpreted as a controlled empirical analysis under vanilla forward-perturbation HAT, rather than as a universal theory of hardware-aware training.

In-memory computing (IMC) is a paradigm that enables neural network inference by computing analog matrix-vector multiplications (MVM) directly in memory crossbar arrays, with the potential for energy efficiency gains over conventional von Neumann architectures. In this work we present a simulation framework for N-ary crossbar architectures that retrieves MVM results with minimal implementation assumptions. The XOR and MNIST classification tasks were successfully inferred using a simulated crossbar array of (4x4) 4-states magnetic tunnel junctions (MTJ). MNIST accuracy reached 93.56% (vs. 97.56% software baseline). PCA dimensionality reduction was shown to drastically lower the number of required operations and improve the software baseline, for only a modest reduction in crossbar inference accuracy. We identified weight quantization as the primary error source, and studied its impact alongside systematic non-idealities and random noise. We find that cell-specific random noise is less detrimental than systematic errors due to averaging across the array. Finally, we demonstrate an optimal number of states per cell that balances quantization error against resistance state resolution to minimize total MVM error.

Analog in-memory computing (AIMC) performs computation directly within resistive crossbar arrays, offering an energy-efficient platform to scale large vision and language models. However, non-ideal analog device properties make the training on AIMC devices challenging. In particular, its update asymmetry can induce a systematic drift of weight updates towards a device-specific symmetric point (SP), which typically does not align with the optimum of the training objective. To mitigate this bias, most existing works assume the SP is known and pre-calibrate it to zero before training by setting the reference point as the SP. Nevertheless, calibrating AIMC devices requires costly pulse updates, and residual calibration error can directly degrade training performance. In this work, we present the first theoretical characterization of the pulse complexity of SP calibration and the resulting estimation error. We further propose a dynamic SP estimation method that tracks the SP during model training, and establishes its convergence guarantees. In addition, we develop an enhanced variant based on chopping and filtering techniques from digital signal processing. Numerical experiments demonstrate both the efficiency and effectiveness of the proposed method.

Using Resistive Random Access Memory (RRAM) crossbars in Computing-in-Memory (CIM) architectures offers a promising solution to overcome the von Neumann bottleneck. Due to non-idealities like cell variability, RRAM crossbars are often operated in binary mode, utilizing only two states: Low Resistive State (LRS) and High Resistive State (HRS). Binary Neural Networks (BNNs) and Ternary Neural Networks (TNNs) are well-suited for this hardware due to their efficient mapping. Existing software projects for RRAM-based CIM typically focus on only one aspect: compilation, simulation, or Design Space Exploration (DSE). Moreover, they often rely on classical 8 bit quantization. To address these limitations, we introduce CIM-Explorer, a modular toolkit for optimizing BNN and TNN inference on RRAM crossbars. CIM-Explorer includes an end-to-end compiler stack, multiple mapping options, and simulators, enabling a DSE flow for accuracy estimation across different crossbar parameters and mappings. CIM-Explorer can accompany the entire design process, from early accuracy estimation for specific crossbar parameters, to selecting an appropriate mapping, and compiling BNNs and TNNs for a finalized crossbar chip. In DSE case studies, we demonstrate the expected accuracy for various mappings and crossbar parameters. CIM-Explorer can be found on GitHub.