Internet of Things

As wireless systems evolve toward Beyond 5G (B5G), the adoption of cell-free (CF) millimeter-wave (mmWave) architectures combined with Reconfigurable Intelligent Surfaces (RIS) is emerging as a key enabler for ultra-reliable, high-capacity, scalable, and secure Industrial Internet of Things (IIoT) communications. However, safeguarding these complex and distributed environments against eavesdropping remains a critical challenge, particularly when conventional security mechanisms struggle to overcome scalability, and latency constraints. In this paper, a novel framework for detecting malicious users in RIS-enhanced cell-free mmWave networks using Federated Learning (FL) is presented. The envisioned setup features multiple access points (APs) operating without traditional cell boundaries, assisted by RIS nodes to dynamically shape the wireless propagation environment. Edge devices collaboratively train a Deep Convolutional Neural Network (DCNN) on locally observed Channel State Information (CSI), eliminating the need for raw data exchange. Moreover, an early-exit mechanism is incorporated in that model to jointly satisfy computational complexity requirements. Performance evaluation indicates that the integration of FL and multi-RIS coordination improves approximately 30% the achieved secrecy rate (SR) compared to baseline non-RIS-assisted methods while maintaining near-optimal detection accuracy levels. This work establishes a distributed, privacy-preserving approach to physical layer eavesdropping detection tailored for next-generation IIoT deployments.

The Internet of Underwater Things (IoUT) is becoming a critical infrastructure for ocean observation, marine resource management, and climate science. Its development is hindered by severe acoustic attenuation, propagation delays far exceeding those of terrestrial wireless systems, strict energy constraints, and dynamic topologies shaped by ocean currents. Machine learning (ML) has emerged as a key enabler for addressing these limitations, offering data driven mechanisms that enhance performance across all layers of underwater wireless sensor networks. This tutorial survey synthesises ML methodologies supervised, unsupervised, reinforcement, and deep learning specifically contextualised for underwater communication environments. It outlines the algorithmic principles of each paradigm and examines the conditions under which particular approaches deliver superior performance. A layer wise analysis highlights physical layer gains in localisation and channel estimation, MAC layer adaptations that improve channel utilisation, network layer routing strategies that extend operational lifetime, and transport layer mechanisms capable of reducing packet loss by up to 91 percent. At the application layer, ML enables substantial data compression and object detection accuracies reaching 92 percent. Drawing on 300 studies from 2012 to 2025, the survey documents energy efficiency gains of 7 to 29 times, throughput improvements over traditional protocols, and cross layer optimisation benefits of up to 42 percent. It also identifies persistent barriers, including limited datasets, computational constraints, and the gap between theoretical models and real world deployment. The survey concludes with emerging research directions and a technology roadmap supporting ML adoption in operational underwater networks.

Smart-home IoT systems rely on heterogeneous sensor networks whose correctness shapes application behavior and the physical environment. However, these low-cost, resource-constrained sensors are highly prone to failure under real-world stressors. Prior methods often assume single-failure, single-resident settings, offer only failure detection rather than sensor-level localization, cover limited fault types and sensor modalities, require labels and human intervention, or impose overheads hindering edge deployment. To overcome these limitations, we propose Tureis, a self-supervised, context-aware method for failure detection and faulty-sensor localization in smart homes, designed for multi-failure, multi-resident edge settings. Tureis encodes heterogeneous binary and numeric sensor streams into compact bit-level features. It then trains a lightweight BERT-style Transformer with sensor-wise masked reconstruction over short-horizon windows, capturing spatial and short-term temporal correlations without mixing unrelated events. This self-supervised objective removes the need for labels or curated semantics. Then, at run-time, Tureis converts reconstruction residuals into sensor-level failure evidence and uses an iterative isolate-and-continue loop that masks flagged sensors, allowing other failures to surface and enabling resilient, fine-grained localization. Across five datasets with up to nine residents, Tureis improves single-failure localization F1 by +7.6%, +21.0%, and +25.0% over three strong baselines. In multi-failure scenarios with up to five faulty sensors, it further boosts localization F1 by +17.6% and +35.4% over two baselines, while the third does not extend to this setting. These gains come with minute-scale localization and an edge-friendly footprint, as a sub-megabyte model that processes each minute of data in a few milliseconds with ~0.5 GB peak memory on a Raspberry Pi 5.

The smart home is a key application domain within the Society 5.0 vision for a human-centered society. As smart home ecosystems expand with heterogeneous IoT protocols, diverse devices, and evolving threats, autonomous systems must manage comfort, security, energy, and safety for residents. Such autonomous decision-making requires a trust anchor, making blockchain a preferred foundation for transparent and accountable smart home governance. However, realizing this vision requires blockchain-governed smart homes to simultaneously address adaptive consensus, intelligent multi-agent coordination, and resident-controlled governance aligned with the principles of Society 5.0. Existing frameworks rely solely on rigid smart contracts with fixed consensus protocols, employ at most a single AI model without multi-agent coordination, and offer no governance mechanism for residents to control automation behaviour. To address these limitations, this paper presents the Society 5.0-driven human-centered governance-enabled smart home blockchain agent (S5-SHB-Agent). The framework orchestrates ten specialized agents using interchangeable large language models to make decisions across the safety, security, comfort, energy, privacy, and health domains. An adaptive PoW blockchain adjusts the mining difficulty based on transaction volume and emergency conditions, using digital signatures and a Merkle tree to anchor transactions and ensure tamper-evident auditability. A four-tier governance model enables residents to control automation through tiered preferences from routine adjustments to immutable safety thresholds. Evaluation confirms that resident governance correctly separates adjustable comfort priorities from immutable safety thresholds across all tested configurations, while adaptive consensus commits emergency blocks.

Design of antenna structures for Internet of Things (IoT) applications is a challenging problem. Contemporary radiators are often subject to a number of electric and/or radiation-related requirements, but also constraints imposed by specifics of IoT systems and/or intended operational environments. Conventional approaches to antenna design typically involve manual development of topology intertwined with its tuning. Although proved useful, the approach is prone to errors and engineering bias. Alternatively, geometries can be generated and optimized without supervision of the designer. The process can be controlled by suitable algorithms to determine and then adjust the antenna geometry according to the specifications. Unfortunately, automatic design of IoT radiators is associated with challenges such as determination of desirable geometries or high optimization cost. In this work, a variable-fidelity framework for performance-oriented development of free-form antennas represented using the generic simulation models is proposed. The method employs a surrogate-assisted classifier capable of identifying a suitable radiator topology from a set of automatically generated (and stored for potential re-use) candidate designs. The obtained geometry is then subject to a bi-stage tuning performed using a gradient-based optimization engine. The presented framework is demonstrated based on six numerical experiments concerning unsupervised development of bandwidth-enhanced patch antennas dedicated to work within 5 GHz to 6 GHz and 6 GHz to 7 GHz bands, respectively. Extensive benchmarks of the method, as well as the generated topologies are also performed.

The smart home is a key domain within the Society 5.0 vision for a human-centered society. Smart home technologies rapidly evolve, and research should diversify while remaining aligned with Society 5.0 objectives. Democratizing smart home research would engage a broader community of innovators beyond traditional limited experts. This shift necessitates inclusive simulation frameworks that support research across diverse fields in industry and academia. However, existing smart home simulators require significant technical expertise, offer limited adaptability, and lack automated evolution, thereby failing to meet the holistic needs of Society 5.0. These constraints impede researchers from efficiently conducting simulations and experiments for security, energy, health, climate, and socio-economic research. To address these challenges, this paper presents the Society 5.0-driven Smart Home Environment Simulator Agent (S5-HES Agent), an agentic simulation framework that transforms traditional smart home simulation through autonomous AI orchestration. The framework coordinates specialized agents through interchangeable large language models (LLMs), enabling natural-language-driven end-to-end smart home simulation configuration without programming expertise. A retrieval-augmented generation (RAG) pipeline with semantic, keyword, and hybrid search retrieves smart home knowledge. Comprehensive evaluation on S5-HES Agent demonstrates that the RAG pipeline achieves near-optimal retrieval fidelity, simulated device behaviour and threat scenarios align with real-world IoT datasets, and simulation engine scales predictably across home configurations, establishing a stable foundation for Society 5.0 smart home research. Source code is available under the MIT License at https://github.com/AsiriweLab/S5-HES-Agent.

The growth and heterogeneity of IoT devices create security challenges where static identification models can degrade as traffic evolves. This paper presents a two-stage, flow-feature-based pipeline for unsupervised IoT device traffic profiling and incremental model updating, evaluated on selected long-duration captures from the Deakin IoT dataset. For baseline profiling, density-based clustering (DBSCAN) isolates a substantial outlier portion of the data and produces the strongest alignment with ground-truth device labels among tested classical methods (NMI 0.78), outperforming centroid-based clustering on cluster purity. For incremental adaptation, we evaluate stream-oriented clustering approaches and find that BIRCH supports efficient updates (0.13 seconds per update) and forms comparatively coherent clusters for a held-out novel device (purity 0.87), but with limited capture of novel traffic (share 0.72) and a measurable trade-off in known-device accuracy after adaptation (0.71). Overall, the results highlight a practical trade-off between high-purity static profiling and the flexibility of incremental clustering for evolving IoT environments.

Intrusion detection in IoT and industrial networks requires models that can detect rare attacks at low false-positive rates while remaining reliable under evolving traffic and limited labels. Existing IDS solutions often report strong in-distribution accuracy, but they may degrade when evaluated on future traffic, unseen (zero-day) attack families, or adversarial feature manipulations, and many systems provide limited evidence to support analyst triage. To address these gaps, we propose ThreatFormer- IDS, a Transformer-based sequence modeling framework that converts flow records into time-ordered windows and learns contextual representations for robust intrusion screening. The method combines (i) weighted supervised learning for imbalanced detection, (ii) masked self-supervised learning to improve representation stability under drift and sparse labels, (iii) PGDbased adversarial training with scale-normalized perturbations to strengthen resilience against feature-level evasion, and (iv) Integrated Gradients attribution to highlight influential time steps and features for each alert. On the ToN IoT benchmark with chronological evaluation, ThreatFormer-IDS achieves AUCROC 0.994, AUC-PR 0.956, and Recall@1%FPR 0.910, outperforming strong tree-based and sequence baselines. Under a zero-day protocol with held-out attack families, it maintains superior generalization (AUC-PR 0.721, Recall@1%FPR 0.783). Robustness tests further show slower degradation in AUCPR as the adversarial budget increases, confirming improved stability under bounded perturbations. Overall, ThreatFormer- IDS provides a unified, deployment-oriented IDS pipeline that balances detection quality, zero-day behavior, robustness, and explainability.

Internet of Things (IoT) networks face significant challenges such as limited communication bandwidth, constrained computational and energy resources, and highly dynamic wireless channel conditions. Utilization of deep neural networks (DNNs) combined with semantic communication has emerged as a promising paradigm to address these limitations. Deep joint source-channel coding (DJSCC) has recently been proposed to enable semantic communication of images. Building upon the original DJSCC formulation, low-complexity attention-style architectures has been added to the DNNs for further performance enhancement. As a main hurdle, training these DNNs separately for various signal-to-noise ratios (SNRs) will amount to excessive storage or communication overhead, which can not be maintained by small IoT devices. SNR Adaptive DJSCC (ADJSCC), has been proposed to train the DNNs once but feed the current SNR as part of the data to the channel-wise attention mechanism. We improve upon ADJSCC by a simultaneous utilization of doubly adaptive channel-wise and spatial attention modules at both transmitter and receiver. These modules dynamically adjust to varying channel conditions and spatial feature importance, enabling robust and efficient feature extraction and semantic information recovery. Simulation results corroborate that our proposed doubly adaptive DJSCC (DA-DJSCC) significantly improves upon ADJSCC in several performance criteria, while incurring a mild increase in complexity. These facts render DA-DJSCC a desirable choice for semantic communication in performance demanding but low-complexity IoT networks.

Due to the strong context-awareness capabilities demonstrated by large language models (LLMs), recent research has begun exploring their integration into smart home assistants to help users manage and adjust their living environments. While LLMs have been shown to effectively understand user needs and provide appropriate responses, most existing studies primarily focus on interpreting and executing user behaviors or instructions. However, a critical function of smart home assistants is the ability to detect when the home environment is in an anomalous state. This involves two key requirements: the LLM must accurately determine whether an anomalous condition is present, and provide either a clear explanation or actionable suggestions. To enhance the anomaly detection capabilities of next-generation LLM-based smart home assistants, we introduce SmartBench, which is the first smart home dataset designed for LLMs, containing both normal and anomalous device states as well as normal and anomalous device state transition contexts. We evaluate 13 mainstream LLMs on this benchmark. The experimental results show that most state-of-the-art models cannot achieve good anomaly detection performance. For example, Claude-Sonnet-4.5 achieves only 66.1% detection accuracy on context-independent anomaly categories, and performs even worse on context-dependent anomalies, with an accuracy of only 57.8%. More experimental results suggest that next-generation LLM-based smart home assistants are still far from being able to effectively detect and handle anomalous conditions in the smart home environment. Our dataset is publicly available at https://github.com/horizonsinzqs/SmartBench.

With the ever-increasing range of applications of Internet in Things (IoT) and sensor networks, challenges are emerging in various categories of classification tasks. Applications such as vehicular networking, UAV swarm coordination and cyber-physical systems require global classification over distributed sensors, with tight constraints on communication and computation resources. There has been much research in decentralized and distributed data-exchange for communication-efficient collective inference. Likewise, there has been considerable research involving the use of cloud and edge computing paradigms for efficient task allocation. To the best of our knowledge, there has been no research on the integration of these two concepts to create a hybrid cloud and distributed approach that makes dynamic runtime communication strategy decisions. In this paper, we focus on aspects of combining distributed and hierarchical communication and classification approaches for collective inference. We derive optimal policies for agents that implement this hybrid approach, and evaluate their performance under various scenarios of the distribution of underlying data. Our analysis shows that this approach can maintain a high level of classification accuracy (comparable to that of centralised joint inference over all data), at reduced theoretical communication cost. We expect there is potential for our approach to facilitate efficient collective inference for real-world applications, including instances that involves more complex underlying data distributions.

The Internet of Battlefield Things (IoBT) relies on heterogeneous, bandwidth-constrained, and intermittently connected tactical networks that face rapidly evolving cyber threats. In this setting, intrusion detection cannot depend on continuous central collection of raw traffic due to disrupted links, latency, operational security limits, and non-IID traffic across zones. We present Zone-Adaptive Intrusion Detection (ZAID), a collaborative detection and model-improvement framework for unseen attack types, where "zero-day" refers to previously unobserved attack families and behaviours (not vulnerability disclosure timing). ZAID combines a universal convolutional model for generalisable traffic representations, an autoencoder-based reconstruction signal as an auxiliary anomaly score, and lightweight adapter modules for parameter-efficient zone adaptation. To support cross-zone generalisation under constrained connectivity, ZAID uses federated aggregation and pseudo-labelling to leverage locally observed, weakly labelled behaviours. We evaluate ZAID on ToN_IoT using a zero-day protocol that excludes MITM, DDoS, and DoS from supervised training and introduces them during zone-level deployment and adaptation. ZAID achieves up to 83.16% accuracy on unseen attack traffic and transfers to UNSW-NB15 under the same procedure, with a best accuracy of 71.64%. These results indicate that parameter-efficient, zone-personalised collaboration can improve the detection of previously unseen attacks in contested IoBT environments.

Virtual sensors replace expensive physical sensors in critical applications through machine learning by predicting target signals from available measurements. Existing virtual sensor approaches require application-specific models with hand-selected inputs for each sensor, cannot leverage task synergies, and lack consistent benchmarks. While emerging time series foundation models offer general-purpose, pretrained solutions in other domains, they are computationally expensive and limited to predicting their input signals, making them incompatible with virtual sensors. We introduce the first multi-task model for virtual sensors addressing both limitations. Our unified model can simultaneously predict diverse virtual sensors exploiting synergies while maintaining computational efficiency. It learns relevant input signals for each virtual sensor, eliminating expert knowledge requirements while adding explainability. In our large-scale evaluation on three standard benchmarks and an application-specific dataset with over 18 billion samples, our architecture reduces computation time by up to 415x and memory requirements by 951x, while maintaining or even improving predictive quality compared to unified baselines. Compared to existing isolated models for a single virtual sensor, our unified approach generates superior predictions at similar inference speed while scaling gracefully to hundreds of virtual sensors with nearly constant parameter count, enabling practical deployment in large-scale sensor networks.

Image- and audio-based remote IoT applications offer a substantial opportunity to address ecological changes. However, to be effective, they must operate for long periods on limited power while also providing data via LPWAN. Previous studies have investigated the energy efficiency of isolated components such as radio transmission or data processing methods within an IoT system. However, a holistic evaluation is required to determine the main drivers of energy consumption in sensor nodes. To address this, we systematically analyze energy consumption across the entire sensor-node pipeline, from data acquisition to optional on-device CNN classification and wireless network transmission, using an ESP32-S3 microcontroller. We compare on-device CNN classification followed by result transmission with transmitting raw sensor data across three environmental monitoring scenarios. Thereby, we vary developer-controllable variables, notably the model architecture and the LPWAN technologies (LTE-M, NB-IoT, LoRaWAN). Our results indicate that on-device inference can reduce sensor node energy consumption by 1.7x to 6.9x compared to raw data transmission, depending on transmission frequency, with an acceptable loss in accuracy. Further, our results narrow down the energy tradeoff to variables IoT developers can control. Therefore, our findings provide empirical guidance for designing energy-efficient, long-range sensing systems and demonstrate that TinyML enables sustainable, autonomous deployments.

The growth of IoT devices in shared environments has outpaced our ability to identify them, posing urgent risks to privacy, safety, and accountability. This challenge is especially pronounced in open-world environments, where network traffic metadata is often sparse, noisy, or adversarial. To address this problem, we introduce a semantic inference pipeline that reframes device identification as a language modeling task over real-world network metadata. As this approach depends on reliable supervision, we first construct high-fidelity vendor labels for the IoT Inspector dataset, the largest real-world corpus of its kind, using an ensemble of large language models guided by mutual-information and entropy-based stability scores. We then instruction-tune a quantized LLaMA 3.1 8B model on this dataset using curriculum learning to support generalization under sparsity and long-tail vendor distributions. Our model achieves 98.69% top-1 and 90.73% macro accuracy across 2,015 vendors, while remaining robust to missing fields, protocol drift, and adversarial manipulation. We also evaluate the model on an independent IoT testbed dataset, assess explanation quality, and conduct adversarial tests to probe robustness under spoofed and obfuscated input. These results position instruction-tuned LLMs as a scalable, interpretable foundation for trustworthy device identification at scale.

The integration of Generative Artificial Intelligence (GenAI) within the Internet of Things (IoT) is garnering considerable interest. This growing attention stems from the continuous evolution and widespread adoption they are both having individually, enough to spontaneously reshape numerous sectors, including Healthcare, Manufacturing, and Smart Cities. Hence, their increasing popularity has catalyzed further extensive research for understanding the potential of the duo GenAI-IoT, how they interplay, and to which extent their synergy can innovate the state-of-the-art in their individual scenarios. However, despite the increasing prominence of GenAI for IoT Computing, much of the existing research remains focused on specific, narrowly scoped applications. This fragmented approach highlights the need for a more comprehensive analysis of the potential, challenges, and implications of GenAI integration within the broader IoT ecosystem. This survey exactly aims to address this gap by providing a holistic overview of the opportunities, issues, and considerations arising from the convergence of these mainstream paradigms. Our contribution is realized through a systematic literature review following the PRISMA methodology. A comparison framework is presented, and well-defined research questions are outlined to comprehensively explore the past, present, and future directions of GenAI integration with IoT Computing, offering valuable insights for both experts and newcomers.

With the rapid development of the Internet of Things (IoT), federated learning (FL) has gained increasing attention for its privacy-preserving use of distributed data. However, conventional two-tier FL architectures are poorly suited to the hierarchical and heterogeneous nature of real-world IoT systems. Hierarchical Federated Learning (HFL) introduces multi-layer aggregation to better match IoT environments, but still suffers from communication inefficiencies and performance limitations caused by large data transfers, non-IID data distributions, and uneven device participation. These challenges hinder the realization of low-latency and high-accuracy training in practical IoT deployments. To address these limitations, we propose H-FedSN for practical IoT environments. H-FedSN leverages a binary mask mechanism with shared and personalized layers to reduce communication overhead by creating a sparse network without altering original weights. To tackle data heterogeneity and imbalanced device distribution, H-FedSN incorporates personalized layers for local data adaptation and employs Bayesian aggregation with cumulative Beta distribution updates at edge and cloud levels, effectively balancing contributions from diverse client groups. Experiments on three real-world IoT datasets and MNIST under non-IID conditions show that H-FedSN reduces communication costs by up to 477 times compared to baseline methods while maintaining high accuracy, making it well-suited for hierarchical FL in IoT deployments.